Auto Date and Time

Over the past couple of days I have noticed my iPhone4 time is wrong - it is 8 minutes fast.
I am connected to the "3" network, and Date & Time setting is set to Auto.
My wife has an iPhone 3GS runnig the same OS version connected to the same network, and the time on her phone is correct.
I have tried rebooting the phone, but has made no difference.
Anyone else with the same problem?

Similar Messages

Can't remotely connect to my server if I automatically set date and time

Hello.
I have configured my OS X 10.6.2 server and am able to remotely manage it.
The only ports I have opened on my router is for Mail and VPN services.
Things work perfectly because I can connect using VPN to iChat, iCal, Address Book, Server Admin, Workgroup Manager, AFP, FTP and such.
The problem is that on my laptop from home, or wherever, if its time is set to update automatically from an NTP server (I have tried with Apple's as well as my server for the NTP Servers) then I cannot connect to my server at all...
The moment I turn off the auto date and time and reconnect to the office's VPN, I am able to use Server Admin, AFP, FTP, Workgroup Manager, Screen Sharing, etc, etc, etc.
It's utterly frustrating because I have to open system preferences, disable the automatic date and time update, connect to the VPN and do stuff on the server. Then I have to disconnect from VPN and re enable the auto date and time.
Could someone explain why this is happening and any possible solutions I might be able to try?
Thanks in advance,
Felipe.

OK, after some testing things seem to be working now.
I opened the NTP port for my server (So I don't have to be on VPN to update the time)....But regardless of that, Server admin and my corporate site work fine.
Here is my problem, I don't understand why it's working now when 30 minutes ago I was having trouble connecting to my server regardless of what NTP Server I used.
The only service I can't access is Workgroup Manager, but I don't know if that is supposed to be accessible only locally (though it doesn't matter since I can screen share but I would still like to know).
Thanks in advance,
Felipe.

How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

Hi JN and Barry,
Barry wrote:
The second case may not be included in the available D&T formats in Numbers 3
For my region, the Date & Time data formats include month.
The Date Pop-Up
This may not be the case for all regions.
Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
Regards,
Ian.

Is there a way to auto fill DATE and TIME

I have the field format set to mmddHHMM
Can you please tell me how to have the date and time auto fill when the PDF is opened?
I am new at this so details are very helpful. Thank you!

Let's say the field's name is Now. Go to Tools - JavaScript - Document JavaScripts and create a new item. Name it "scripts".
Delete any code that is created by default and enter this instead:
this.getField("Now").value = new Date();
Click OK and you're done. The field will update each time the file is opened.

Date and time field help

Hey guys and gals,
I'm working on a basic simple form that I'd like to use as a fax cover sheet and I'm brand new at this and I just can't find the answer anywhere. The only way I can get it to show the date and time is if I choose calculated - read only, then runtime property. But then it changes every time you open the document. It doesn't autofill the date and time any other way. Is there a way to make the date and time auto fill ONLY the first time you fill it out and then lock that field? Or do you just have to choose one of the other options, i.e., user entered - optional, recommended or required and then type it in? Which I don't really get either, because those just give you a blank field that you type in. I don't see the difference between those options and a text field. I thought maybe I could upload the pdf to show you, but I guess you can't do that here. Anyway using Acrobat 9 pro on Vista.

It sounds like you're using LiveCycle Designer, not Acrobat, to create the form. If that's the case, you should post this question in the LiveCycle Designer forum: http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

Microsoft Date and Time Picker Control 6.0 - Need help!

I am working on a form in Office 365 Excel 2013 that uses the Microsoft Date and Time Picker Control 6.0. When I set the form up last week, this Active X control was working perfectly. The weekend goes by...and now it's not working at all?
My PC is 64 bit. I believe my version of Office is also 64 bit. When I researched this issue online, I found lots of people who indicated that this control was missing in their development kit. It was and has always been available in mine
(i.e. I didn't have to load an MSCOMCT2 file). Further, this control WAS WORKING when I created it last week. Now it is not, even though no changes have been made to it. I can place the control on the sheet and even set properties for it.
But once I click out of Design Mode, it is not functioning. It doesn't open or respond to any clicks on it.
Can anyone help me identify a reason why it may have suddenly stopped working? I don't think it is macro-related because I have a 'Clear Form' button on the same page and it works just fine.
UPDATE: I've noticed something else peculiar but relevant. My office 365 just did some updates. When updates were completed, it auto-reopened my file. I noticed that the Date/Time Picker button looked funny (really pixelated).
So I hit 'Design Mode' and resized it. After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it.
Enabled Macros. When I tried to use it after reopen, it doesn't work again. Won't respond to ANY attempts to click on it. I can click on 'Design Mode' and it sees the control, edits properties, etc. But when you click out of 'Design Mode,'
it's a dead button again. I also went to someone else's desk to test this form. Same problem. Date/Time picker button doesn't work, even after enabling macros. The Clear Form Button has no problems though.
Thanks!

Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My system time is always wrong, until I open date and time

Hello,
I have my system set to auto-update time.
However every time I boot up, the time is wrong, until I go into date and time.
For instance, right now, my system time says's it it 10:40 AM. It is currently 5:40 PM PST (had to look at my phone to know)
Please help me fix this ASAP!
Nick

Hey Nick
If you have a desktop, there is a battery inside that keeps tabs on the time when it is powered down, or unplugged. If you have a laptop, that's the job of the battery that supplies your laptop when it's running.
if you have a desktop, most likely the battery is dead. This is a user replaceable part, so unplug it, look around inside for something that looks like a battery(like a AAA one, but not exactly), pull it out, and find a replacement.
If you have a laptop as I do, and your battery won't hold a charge very long, as mine won't, then every time I turn it on, I have to go into Date & Time and tell it to update.
Hope this helps.

Date and Time and others not working after 10.5.6- its driving me bonkers

Recently, after booting my computer and logging in (I am the sole user and it auto logs in).
Well only 3 things show up in the upper right menu bar:
Spotlight, and two 3rd party items, I added (connect360 and bootchamp)
But airport and Date and Time do not sow up at all. When I go to System preferences I see that things are all screwed up: the box that says "show date and time in menu bar" is always unchecked. If I recheck it will revert the next time I open up the preference pane. Another odd this is it that it lets me click the boxes even when the padlock is locked.
Now, I can log out and then log back in, and it loads everything correctly. But really its stuff like this that drives me bonkers. Anyone have a similar problem or a solution?
I am going to try and disable auto-login and see if it works the first time when I login. If it works it will be better than right now but, it will still irritate me.
Thanks in advance

You might try moving the apple.com.systempreferences.plist (in the Users/yourusername/Library/Preferences folder) to the desktop and restarting or log-out/log-in.
If it doesn’t help, you can move the .plist file back into the Preferences folder, replacing the new one it created to restore your original settings.

My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

Next Syndication Date and Time changing

Hi Experts,
While setting the Outbound port to Automatic with Daily processing interval i set Next Syndication Date and Time to some value.
but after the first occurrence of syndication, Next Syndication Date and Next Syndication Time are changing to new unexpected value.
I am using MDM 5.5 SP6 version.
Please help on this.

Hi Prashant
Copying from the SAP Note 1124246-
Bug Fixes
MDM SYNDICATION SERVER 5.5
Fixed: Change for auto syndication to update next syndication time without accumulating time offsets
Please close the thread if answered.
Thanks-Ravi

HT1551 Initial set up setting date and time just spins and spins..

Can't seem to get past the set up time and date on my Apple TV...it just spins and spins

Go to the Setting menu> General > Set Date&Time . It should display AUTO. Click on set Date and Time change it to MANUal and adjust the time accordingly.
As for the apple id that should be a different issue, my ATV frequenlty thinks it's in California's time zone and I have no trouble login in and out. Try going to the Apple ID site ifto you can't login there, you may have the wrong password.
Apple ID:https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Can't change the date and time

On a recent trip abroad, my N96 automatically switched to the local time on arrival, but it failed to switch back to UK time when I returned. Now my phone is stuck 3 hours ahead, and it won't let me change the date or time manually. When I select Settings | General | Date and time, and click Open, 'Change' flashes up briefly, but even if I'm fast enough to click it, nothing happens.
I've tried reverting to the Factory Settings, but that did not resolve the problem. I've also checked for Firmware updates, but there aren't any. Any suggestions for fixing this would be very welcome...

Your operator doesn't seem to support time autoupdate while the operator you connected to while abroad does.
Go into the clock settings and set auto time update to "off". Then set the time zone to "GMT 0:00 London". This should bring the clock's time back to what it should be. If it doesn't, at least you can do so manually now (having auto time update set to "on" removes your ability to set the date and time manually).
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Date and time often wrong

My passport date and time randomly revert, about once a week, to show the wrong values. The date always changes to 9 march 2015, and the time to some random no. This all happens independent of whether I have auto date/time update set to on or off. This happens in the uk and abroad. This is the most rudimentary of errors, and is obviously a real pain. All messages and photos go out of sequence, alarm obviously fails, etc. There appears to be no pattern to when this happens. Can anyone help please? Thanks.

I recommended preforming a complete reload of your device software through BlackBerry link. This information is provided by a Blackberry knowledge base article. The following procedure will delete all data and applications on the BlackBerry device. If possible, back up your data prior to reloading device software. See KB33526 for steps.Note: Only reload device software when instructed to do so by BlackBerry Technical Support Services or by another Knowledge Base (KB) article.
Troubleshooting should always be completed before reloading device software. If appropriate troubleshooting has been completed and the device continues to experience an issue, contact your wireless service provider or administrator to further troubleshoot the issue and escalate to BlackBerry Technical Support Services.If you have been instructed to reload the device software, complete the following steps:On Windows:Ensure the computer is connected to the Internet.Install the latest version of BlackBerry Blend (includes BlackBerry Link) here: www.blackberry.com/blendPower off the BlackBerry device.Open BlackBerry Link.Connect the device to the computer with the USB cable.Under the Devices heading, click the device name when it is displayed.
Note: If the device is not detected, at the top-right click Preferences.Under Reload Device Software, click Reload.Click OK.On Mac OS:Ensure the computer is connected to the Internet.Install the latest version of BlackBerry Blend (includes BlackBerry Link) here: www.blackberry.com/blendPower off the BlackBerry device.Open BlackBerry Link.Connect the device to the computer with the USB cable.In the menu bar at the top-left of the screen, click BlackBerry Link > Preferences.Under the Reload tab, click Reload.

Create quick event fails to recognize date and time

When I use "Create Quick Event" and enter "June 29 9am debate", iCal creates an event today, now, named "June 29 9am debate". I have tried different variations like "29th of June at 9am" etc. but all failed - I always get an event today, now.
I am pretty sure Create Quick Event used to extract date and time from the box: it created an event named "Debate" on the date of June 29, starting at 9am, lasting one hour - what could be the reason it doesn't work any longer? And more importantly, how could I get back the old behavior?
Thanks!

It is not prerly connected to the network
Make sure location is set correctly
DNS should be set to auto (settings - general - network)
If on wifi try ethernet
Ensure rputer has port 123 open (refer to manual if unsure)

Auto Date and Time

Similar Messages

Maybe you are looking for