Auto duplex printing on MX922 won't double side print PDF's that my old MP560 did. what can I do?

My MP560 got the dreaded B200 code, meaning get a new printer. Hesitated to buy another Canon, but the MX922 had all the features I was looking for. Easy set up, but first problem was printing from the internet, 922 wanted to use paper in the top tray not the letter size in lower try. Had to save doc. as PDF then print that, 560 did this without any extra work. Auto duplex is way to complicated and haven't got it to work yet. 560 duplex print was selected from print dialog box. Anyone have any helpful suggestions. I am thinking of returning the printer.

This YouTube video solved the problem for me.
https://www.youtube.com/watch?v=HB4LbWcsEFg

Similar Messages

  • Double side print

    I can't double side print because the pdf size is always changing & my printer only will do the double side print if the document is standard size 8x11. How can I change the size of my adobe so it defaults to the required 8x11?

    That is specified when the document is created.
    But in your case, can't you get it to print when changing Page Size & Handling, e.g. Fit, or Shrink oversized pages?

  • Black ink only & double side printing

    This is regarding a printing issue using my newly bought printer. I wish to print double sided using the option black ink cartrige only under grayscale printing. However, when I select double side printing, there were only 2 options under the grey scale printing (off which means color or high quality). Is there a way to select both double side and black ink cartrige? Furthermore, does grayscale printing using high quality option uses ink from the black ink cartrige or also from the color cartriges? thanks in advance

    What printer model? What operating system?
    Generally there are two options for grayscale printing, either "use black cartridge only" or not.  If the "use black cartridge only" box is not checked color ink will be used as it provides better print quality.
    Some printers and some drivers do not support "black cartridge only" when printing in duplex mode.  In duplex printing a small amount of color ink may be used to underprint the black print to make it dry faster to prevent smearing in duplex printing.  (Not intuitive, but it is correct....)
    See here for some information on how ink is used.  Some ink will be used for servicing even when printing with black ink only.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Anybody here have try the double-side printing?

    It doesn't work when I try to do the double-side printing. And in the schedule info, it is Single-side --!!. Of course our printer support the double-side printing.So,any idea about this?
    And I add the filter to transform the pdf to ps,is this the possible reason that the tray selection and double-side printing do not work?

    To print on both sides (Duplex Mode), you have to
    1.Have a Postscript ready printer.
    2.Install Pasta
    3.Install and Setup third party software like xpdf or Ghostscript to convert the PDF to PS file
    4.Setup Printer Style and Pasta Config file
    a.Define custom print style like 'Duplex PDF Publisher'
    b. Assign this print style to Printer Type with with standard PASTA driver 'PASTA_PDF'
    c.Then query printer driver 'PASTA_PDF' and on the arguments field, enter following -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfg
    d. Verify that the file $FND_TOP/resource/pasta_pdf.cfg is present and that it contains only one "uncommented" entry corresponding to the installed third party tool, as follows:
    preprocess=pdftops -duplex {infile} {outfile}
    pdf2ps (Ghostscript) by itself does not support the duplex option. You will need to use XPDF software (pdftops).

  • How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

    how do i fix my printer when it won't show the print preview for web pages?  it worked for a while and now it doesn't.  printer is an hp officejet 7310 all-in-one.

    I would suspect this is a hardware issue.  The rollers are probably having issues picking up the relatively smooth thick media.  You might have better results be cleaning the paper pickup rollers with a damp paper towel.  Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
    Regards,
    Bob Headrick, MS MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to stop double side printing on HP ENVY 4500!!!!! HELP ME PLEASE!!!!!

    i am going CRAZY!!!! I can't stop with the damm double side printing !!! And it's only using the blank ink cartiage and not the color one!!!!! PLEASE HELP ME!!!!!!!

    Hi stressedteacher,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are having an issue with the printer doing double sided print out's.  So I can better assist you,  Please respond with which Operating System you are running.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    I look forward to hearing from you and I am always happy to help.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Mac Microsoft Word 2008 double side printing

    Hi.
    I recently purchased Macbook Pro 15, and installed Microsoft Office 2008.
    I have a SamSung Express 282 series laser printer.
    When I use my window pc or window labtop, it double-side prints all right.
    But when I try to double-side print with Mac Pro Microsoft word 2008, it doesn't work.
    From the Print menu, I go to 'printer feature' and click on 'reverse two-sided printing', but it keeps saying
    "Changing the setting of Reverse Two-Sided Printing to On would cause a conflict that cannot be resolved. No change will be made,"
    and does not let me click on it.
    Does anyone know what's going on?
    I really want to save some trees and do only double-sided printing, but it doesn't let me.
    Any help would be greatly appreciated.
    Thanks, guys.

    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_s eries/pixma_ip4200#DriversAndSoftware
    Be sure to pick the OS X Lion 10.7 driver from the pulldown menu before selecting the driver category below it.
    If that doesn't work, contact Canon.   There are some Lion supporting double sided printers for sure.
    Mind you,when manufacturers rely on the CUPS drivers as they did in this instance they may have
    taken the easy way out, and that might avoid having the double sided printing.
    http://support.apple.com/kb/dl899 may be able to patch those drivers to give you double sided printing if the Canon ones do not.
    There are a few other open source alternatives*.
    When double sided printing doesn't work, the trick is to rotate the pages upside down and feed face down switching odd and even page numbers.
    Test with single sheets first, and then once you get the hang of it, do multiple.
    I don't know where your printer feeds, so you'll have to try a couple times to figure out the correct direction.

  • Double Side printing in Lion?

    Ever since I upgraded to Lion I've noticed that I cannot double side print in Reader. Other apps are set to double side print without issues, but I can't get Reader to DSP. I have Adobe Reader X (10.1.0), Mac OS 10.7.1 and a Lexmark Prevail Pro705. I've even gone to the Lexmark site and updated my driver. Any thoughts? I checked the sticky on the Forum Homepage about Lion compatability, but I was unsure how to translate the work around to my situation.

    I ran into the same issue - Adobe Reader does not print double sided on my Lexmark Genesis S815. Did you find a solution in the meantime?

  • Double side printing from SAPScript, last page missing

    Hello all,
    I try to setup double side printing from SAPScript, but have a problem and hope that somebody might help me.
    In my form I have two pages with main window (FIRST and NEXT) which have print mode set to 'D' and next page set to 'TANDC'. Page 'TANDC' has only one VAR window which contains terms and conditions text.
    Now, everything works fine except that T&C text isn't printed after last page (ie. after last 'NEXT' page). Is there a way to force printing of last (back side) page?
    PS: Calling 'WRITE_FORM' from the print program at the end didn't help either.
    Thanks in advance.
    Grigor

    Hi Vinod,
    this has a same effect as calling NEW-PAGE from form.
    Again, window 'FOOTER' is printed on a new page instead bellow 'MAIN' window and there are no T&C on the last sheet. I also tried to explicitly call text element in window 'FOOTER' before calling 'CONTROL_FORM', like this:
    CALL FUNCTION 'WRITE_FORM' "last element in 'MAIN' window
           EXPORTING
                element = 'LAST'
           EXCEPTIONS
                OTHERS  = 01.
      CLEAR sy-subrc.
    CALL FUNCTION 'WRITE_FORM'
           EXPORTING
                element = 'FOOTER'
                window = 'FOOTER'
           EXCEPTIONS
                OTHERS  = 01.
      CLEAR sy-subrc.
    CALL FUNCTION 'CONTROL_FORM'
           EXPORTING
                 COMMAND = 'NEW-PAGE'
           EXCEPTIONS
                 UNOPENED = 01
                 UNSTARTED = 02.
    It looks like the 'FOOTER' window is under control of SAPScript, not of print program.
    Note: 'CONTROL_FORM' call is placed immediatelly before 'CLOSE_FORM', so at the last possible place.
    Kind regards,
    Grigor

  • PhotoSmart Premium C309a driver problem in Win10 at double side printing

    My problem is as follows: I created a catalog in MS Publisher 2013 for A4 paper format with 2 page per paper. I selected booklet side-fold type and double side printing. MS Publisher prepared all pages in correct way. I even created PDF versuions of such pages. But each time when I print pages, the printer keeps make them smaller (I think it scale them for Letter format) despuite the fact I changes in printer preferences A4as default paper source, all documents are in A4 format etc. As result, the printed pages are shifter from the center page on the left side, which is ok for one side printing but cannot work for doyuble side printing as shift is in different directions for result paper. Additionally, I cannot any more print on DVD or CD surfaces as the driver doesn't support sauch a feature. Please let me know how I can replace the native Windows 10 driver with the one for Windows 8.1? Or is there any other solutions except using another OS? Thx, Vlad.

    Hi , Welcome to the HP Forums! I noticed that your HP PhotoSmart Premium C309a is having a driver problem in Windows 10 when printing double sided. I am happy to help!  According to this guide, How to Use the 2-Sided Feature, it looks to me as if the double sided printing feature is only available to use with regular plain white paper. (Letter sized), which could be why the printer is scaling the size to letter.  You could possibly try using an alternate driver, by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by , and follow the steps for Windows 8, as they will work on Windows 10. Then you could attempt a custom size print. But as mentioned previously, I am positive that the 2-sided feature for this printer is for Letter sized paper only, and cannot guarantee this will work.  Hope this answers your question, and thank you for posting!  “Please click the Thumbs up icon below to thank me for responding.”

  • I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    it is a windows 8

  • My ipod has 760 songs on it.  I had to reload my computer that contained itunes.  The new installation of itunes won't allow me to copy the songs into the library.  What can I do?

    My ipod has 760 songs on it.  I had to reload my computer that contained itunes.  The new installation of itunes won't allow me to copy the songs into the library.  What can I do?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • My iphone4 Safari won't let me sign into any websites (email, school, commercial).  What can I do to fix this?

    My iphone4 Safari won't let me sign into any websites (email, school, commercial).  What can I do to fix this?

    Sorry just re-read your original post and realized that my answer doesn't address you problem:
    "If the problem is that Safari won't display a login screen when started, try going to a different website than is displayed when you start Safari.  When I have this problem, I select another website from my bookmarks and am redirected to the login screen. It's strange, but it works."
    So..., what is happening that it won't let you login?  Keyboard not popping up?  Website won't accept input?

  • Auto feed for 4x6 photos moves to back but HP photo paper does not pick-up . What can I do to fix.

    Auto feed for 4x6 photos moves to back but HP photo paper does not pick-up .  What can I do to fix. Photosmart C6180, MS Vista
    Have tried one sheet, multiple sheets, new pack of photo paper etc.

    Hi there,
    This article should help as it covers cleaning your pickup rollers. Check out the video and give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My 8 key won't work when I press it to put in my password, what can I do?

    my 8 key won't work when I press it to put in my password, what can I do?

    Presumably you are connecting it from the *Dock Connector.* In this case, the controls on the car stereo should be controlling the iPod and the iPod's controls are disabled.
    If you are using the car's connection interface, consult the car manual to find out how to control the iPod. If you are using an adaptor between the iPod and car, ask the adaptors installer or manufacturer.
    Phil

Maybe you are looking for