Auto Duplex Unit on Officejet pro K550

Auto Duplex Unit works but will not carry over two-sided printing to next two-sided print job after exiting print. Must setup every time I need to print two-sided.
This question was solved.
View Solution.

HI goj,
Here is a link to a document about using the two-sided printing on your auto-duplex unit.
Make sure you follow all of the steps and this should resolve your issue.
Let us know if this helps or if for some reason your problem is still happening.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Similar Messages

  • Margins ignored on OfficeJet Pro K550

    I have a VB 2008 .NET program that I wrote.  It prints labels.  It works perfectly on my HP LaserJet 1018.  I set the margins depending on which label on the sheet I want to print and it prints on that label.  But on an HP OfficeJet Pro K550, it shifts the print down and to the right.  I tell it to have a 0.5" left margin and 0.6 top margin and I get 1" at the left and .75 " at the top.  The other two margins are correct and the resultant labelis the correct size, just shifted down and right.
    Obviously this won't work because it doesn't print on the label! 
    I tried MS word 2003 and told it to print with 1/2" top and left margins and it worked.
    So why does it work on the LaserJet and not the InkJet with the same margin settings?
    Thanks.........  Carl

    HI goj,
    Here is a link to a document about using the two-sided printing on your auto-duplex unit.
    Make sure you follow all of the steps and this should resolve your issue.
    Let us know if this helps or if for some reason your problem is still happening.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Unable to install officejet pro k550 in windows 7

    Driver failed to install. Have also tried info from this page http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02663702&lc=en&dlc=en&cc=us and still cannot get printer to install. Either as a network or when connecting via USB. USB printing gets installed and is ready and working but not the printer driver. I am doing everything on the Win 7 laptop as an administrator. I've installed Dell, Lexmark and an HP Color LJ CP1215 with out any problem but not this officejet pro k550.

    Hello jm092749.
    Welcome to the HP Forums.
    I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
    This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
    I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
    Thank you for bringing this issue to the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • Ink low lights on the Officejet Pro K550

    I have this officejet pro k550 in which some lights went on indicating I'm running low on ink in some of the color cartridges.  I replaced all the cartridges and the lights didn't go out.  Now I look at "utilites" (on my Mac computer) and it says that I'm running low of ink.  Do the lights automatically go out when you replace the ink cartridges or do I have to reset something?  How can I be out of ink when I'm using new HP cartridges?
    HELP PLEASE.

    Did you find a solution? I have done the exact same thing and spent many hours trying to resolve this to no avail! Now I have 2 printers that won't work!!!

  • Officejet Pro K550 Driver Failure in 10.6.8 & 10.7.4

    A coworker's HP Officejet Pro K550 has stopped printing.  Initially the error codes from the front panel indicated a paper jam.  After disassembly (which is NOT easy btw) and a complete cleaning, the printer still refuses to function.  I can print test pages all day long by holding the Resume button on the front panel of the printer.  However, once I send a page to the printer from Microsoft Word, Preview, or any other program, the printer seizes and both the Power and Resume button flash as if there is a  paper jam.  There is none as no paper comes out.  Curiously, if I use a Generic PCL Printer driver instead of the HP Officejet Pro K550 driver, I can print in black and white just fine.  I've tested this on laptops running 10.6.8 and 10.7.4 with the same results.  I've reset the printing system on both machines with the same results.  I'm officially out of ideas.  Can anyone think of what's going on?

    hi there,
    i get the exactly same error,
    i can also print by Generic PLC driver,
    or output a config test page by holding power and pressing red X once on the printer.
    but i always get "drucker ist belegt" which means "printer is in use" error when i try hps mac osx K550 10.7 driver !
    everything works (hp utility tools to calibrate etc. stuff) except for printing from whatever application i use
    what the hell is happening here? and how can i get full funtionality back?
    i already have Firmware version 20061019 SPP0013H which seems like the only one i could download-
    but, although i would possibly need this firmware update-
    there is no way to install the firmware update,
    since clever people of HP decided not to leave a tool for osx lion users,
    the manual for doing firmware updates is only written for 10.4.8 users (maybe half a dozen years ago?!)
    i cant find a update firmware option anywhere although i see a firmwareupdate.task plugin which seems to be for hp printer utility.... but i cant use it sensefully ....
    what are you up to? making me crazy? making people buy new stuff?
    is there any solution in sight? 

  • Officejet Pro K550 in Windows Technical Preview

    The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
    Thanks

    Hi,
    Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
    If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Printing duplex with HP Officejet Pro 8600 causes windows 7 OS to shut down/restart

    Why when printing duplex with my HP Officejet Pro 8600 printer it causes windows 7( 64-bit) to shut down/restart. Windows message is "Windows has recovered from an unexpected shutdown.  I've ran HP Hardward Diag. Utility and Print and Scan Doctor which indicated everything is working properly with the printer.  Ocassionaly I can print duplex without windows shutting down and restarting, but most of the time it creates issue with Windows causing it to stop and restart.  Single sided printing seems to be fine.  I've already oncehad windows to "Startup Repair" in which ccase I selected restore to a previous working point.  Everything worked for awhile then a duplex printing session starting causing windows to shut down again.   THanks for your assistance.

    Yes, the updated USB 3.0 driver corrects the issue and should be installed.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Duplex printing with officejet pro 8000

    I am using this officejet pro 8000 to print up some newsletters.  When printing a two sided copy (duplex printing) something happens which changes my border setting.  Printing the exact same document, but electing one-sided copy renders a perfect border.  I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer.  Has HP ever come up with a fix for this?  I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines.  This has rendered good borders on duplex prints, but diminishes the quality of the print copy.  Whatcha think?

    Terrible Tom wrote:
    Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
    Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
    MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
    Apple doesn't write the HP software.
    Hope this helps.

  • Duplexing unit for Officejet 6500

    I've got hold of an Officejet 6500 to take to university with me next month. I'm thinking that a duplexing unit would be useful but HP UK don't have any and I can't find any online elsewhere (except HP USA, which would be a bit too expensive I reckon). The part number is CB057-67001, anyone know of a place where I might be able to get hold of one?

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Officejet Pro K550 won't manually duplex

    My Officejet K550 used to manually duplex. Now it prints all pages continuously, even though the "reload paper" window appears on the screen!
    I am using Windows Vista Home Premium, the latest version, with all updates.
    Thanks, in advance, for any advice.

    Hi Linda,
    I found some colleagues who had worked on that printer. There are some things to try, however it's not all good news.
    The engineer believes the nozzles on the printhead may be clogged for one of 2 reasons. The first is that there is just some ink residue. Here's what he says: "Perhaps you can suggest the customer to try remove the printhead (just the printhead that has the cyan nozzles), and use a wet cloth or cotton swab to clean away the ink residue around the nozzles. Then replace the printhead, and perform the cleaning sequence that the manual says. This procedure might be able to recover some nozzle clog scenarios, but it will use up some ink."
    However, it could be that air has gotten into the printhead: ". If the printhead is deprimed, it means air has got into a certain chamber after started up, that can never be purged out, causing ink not able to flow through anymore. For such cases, I think the printhead need to be replaced."
    The engineer also talked with customer assurance, who believes this particular product is past its end of life, which means that it's technically older than Hp designed it to function. I know you've only had it 3 years, but wanted you to be aware of that.
    Karen
    I am an HP employee.

  • HP OfficeJet Pro K550 - IP Printing

    Primary issue: printer model does not show up on the "Print Using" list.
    Detail: I have downloaded from HP, and installed correctly, the driver for the K550. In fact, if I simply plug the printer in directly via USB, it shows up, with the right driver, perfectly installed.
    However, the printer is not intended to be installed via USB. It resides on a D-link print-server connected to my network. When I try to install the printer using the Printer Setup Utility, I select IP Printer and LPD. I enter the correct information regarding the IP address (192.168.1.200) and Queue. *However, in the "Print Using" drop-down list, the printer model (driver) that I know is installed does not appear in the list.*
    How do I select the driver if it doesn't appear on the list? How do I get it to appear on the list?
    Thanks.

    (Directly copied from an answer I gave just yesterday.)
    You have come accross the infamous CUPS driver problem. The network printing protocols in OS X including Windows Printing are provided by CUPS (common unix printing system). Hardly any non-postscript printer drivers (Brother is the exception) work "with" the CUPS system - they are Carbon drivers that bypass CUPS. You need a CUPS driver. I'm pretty sure your model is supported by hpijs, but you should check to be sure:
    http://www.linux-foundation.org/en/OpenPrinting/macosx

  • Adober reader X and windows 7 PC cannot print to HP Officejet Pro K550 printer

    Any suggestions for getting PDF documents to print using the above?  Had exact same printer and same model HP PC printer working previously.  I connect this printer to my current PC and it prints everything except PDFs.  I am able to print PDFs to other printers.  I have relaoded printer drivers and Adobe reader.  Any suggestions?

    Same Here,
    Windows 7 professional 64 Bit Adobe Acrobat Reader X
    Can print everything else on K550 But No PDF.
    Can print PDF's on  two other HP printers.
    As stated No errors, Print never goes to printer que, just disappears ??
    Funny used to print PDF before some Update ???
    Was it Windows or Adobe  that broke the PDF printing??

  • I have a HP OfficeJet Pro K550 with a default static IP address and I can't access it to change it.

    Because this printer's default static IP is not in my subnet and my network does not have a DHCP server I am unable to access the settings I need to change the IP address to one I can use.  I am using Windows 7 64-bit and am plugged into the printer via USB.  I know if I had an IP address from my network I could type it into the address bar and open up far more settings but I am unsure how to do that since the default IP is not on my network.
    This question was solved.
    View Solution.

    I assume you cannot log into the printer's subnet temporarily?  Can you disconnect the printer from that subnet temporarily?  Can you connect an Ethernet cable between the printer and your PC?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Hp officejet pro k550 will not print a test page using control keys on the printer.

    How do I print a test page to ensure that this printer is still operational?
     I have tried all instructions for clearing the printer of possible jams, removed and reinserted the print heads, and cleaned the rollers.  When pressing the appropriate keys on the front of the printer, it will not print a test page.  and no error lights appear.
    The printer has been connected to a different computer and ceased working last summer.  The printer would not respond to commands from the computer nor would it respond to keys on the front of the printer itself.  I can get the printhead to move using the controls on the front of the printer, however.  The printer is not currently connected to any computer and the nearest computer does not have the appropriate drivers installed.  Originally the printer was connected to a Dell desktop running Windows XP (sp 3).
    This question was solved.
    View Solution.

    Here's how to print a self-test page from the control panel.  
    I am an HP employee.

  • HP Officejet Pro K550 Not Powering On

    When I press the power button on the printer, nothing happens.  The printer is plugged into an AC power outlet.  The power cord has been tested as well as the AC power outlet.  Power is coming to the printer but the power switch or something beyond the power switch is failing.  This printer has worked fine up until recently.  I need to know how to go about testing the printer from the power on switch to inside the printer itself.  The power cord is fine and I have determined that power is getting as far as the power switch.  Any problem to be resolved only exists from the power switch forward to inside the printer.
    Is there a fuse that can be replaced?
    The power cord has no inline adapter like most printers.  Therefore, the adapter, if one exists, must be inside the printer beyond the power on switch.
    How do I go about taking the printer apart?  I am willing to do the work to determine what the problem is.  I understand electronics and can trouble shoot most issues.

    Hi there bigdog5280,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for