Auto fade on both ends?

When I do an Overwrite with transition, it only adds a fade at the front of the clip. Is there a way to make FCP add a transition at both ends automatically?
I'm using the latest version of FCP.

Perhaps not as simple as what you're asking for but... Edit your clips into your sequence without fades. Define dip to color with the correct parameters as your default transition, Select all your clips in the timeline, make sure your position is at the beginning of the clips and drag them to the canvas to overwrite with transition. word to the wise: Duplicate your sequence before you try this as it's pretty easy to screw up your sequence if you make a mistake.

Similar Messages

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers.

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers. (I'm also 3 days new to iMac and iPhoto 11 from an eMac and iPhoto 6.)

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

How do I apply a fade to the end of an audio track?

I'm using Captivate 7, and have added one of the Gallery sounds to a slide in my software simulation. I want the track to fade at the end of slide, so I guess I need to apply an effect. All the help refers to "clicking the triangle next to the audio track name" to expand the track for editing, then goes on to talk about keyframes. I don't see a triangle next to the track name, or next to anything related to the track. I am in the Effects workspace. Also, on the EFFECTS tab, all the selections are grayed out.
I also tried adding a fade by using the settings on the PROPERTIES tab, but it doesn't affect the playback.
How do I apply a fade effect?

Effects have no relation whatsoever with audio clips, I don't understand why you were looking there.
You can edit audio, and to get into the editor there are several ways. If this is slide audio, the clip is visible on the timeline and right-click menu has an option Edit. Another way is to find the clip in the Library, and the right-click menu on its name has more options, not only Edit in Captivate, but you can also use another application which I would recommend. The audio editor in Captivate is pretty limited, I'm using Audition, but Audacity is free to use.
For an easy way to have a fade out (you can time it, not the way of fading like in a real audio editor), you don't even need the audio editor in Captivate. Look in the Properties panel, part Audio and you'll have Fade in and Fade out.

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder.

Fad out the end of a clip

Can anybody tell me how I can fade out the end of the sound clip I have created in sound track pro?
Thanks a lot.

If you're in multitrack mode, you'll need to use volume automation. Click the arrow to the left of the track name to open the automation pane. Double-click on the volume automation line at the place you want your fade to begin. Double-click again at the place you want your fade to end and grab the little square dot to the bottom.

Is Apple making a connector with the lightening on both ends for 5s and ipad mini syncing capabilities

I can not sync my 5S with IPad Mini because of adapter not having lightening connector on both ends. I can't afford a new computer to sync my phone. Getting replacement phone because camera stopped working but can't backup my phone. My Mac doesn't have intel.

Okay great..bought ipad mini for nothing..everybody said get an ipad you can use it to sync your phone blah blah blah..
Thank you for info

How do you implement a query that examines if a line is connected at both ends?

Hey all,
I want to write a query that examines if a line is connected at both ends (a very common rule in the area of topology) but I cannot seem to find an easy way to do so. (By connected I mean that there is another line that 'touches' the given line.)
The problem I have is that I cannot find any way to retrieve the start or end point of a line geometry. (I am using Oracle 8.1.7.)
If someone can give me any suggestions I would be very grateful.
Thanks in advance,
Johan Behrenfeldt

Hey,
Thanks for both of the answers.
I eventually solved the problem using Java stored procedures. However, in the case that someone is looking for the answer to the same question I was asking I just wanted to point out a few things.
Jens' solution seems correct and it was my first approach as well. However, there is a case when it fails and that is if the lines connect in the shape of a triangle. You would find a line that has connected lines at both ends but the connected lines would have a non-empty intersection and would therefore be discarded incorrectly.
The second suggested solution works, but I have found it less than trivial to find the ordinate tuple that contains the start point of the line string. Many GIS applications insists on using the ordinate array as a storage place for data. They will use the sdo_etype 0 to hide the information from Spatial, but when manipulating the geometries manually they cause a great deal of trouble. (Try writing an sql query to retrieve the start point of a line.)
The latter is, however, what I ended up using in the end. With the help of Java stored procedures the task became fairly easy.
Thank you, in any case, for all your help, and I apologize if I come off as a smart-allick here. ;-)
Johan Behrenfeldt

When I start a phone call, noboby can hear my voice . Only when I click on speaker voice can be heard at both ends.

When I start a phone call,nobody can hear my voice and viceversa. Only when I click on speaker , voice can be heard at both ends.

Return the darn thing!
Why do you & we accept a phone that does not work 100%
We should be discounted the non working percentage, or simply get a new working one.
Would you accept a saucage with a rotten end, and hope they would treat it with enough chenichals to make it taste and look good?
The problem seems to me a hardware problem, and may be poor assembly. Noticed that incoming calls on my first 4s when vibrator was on, made an extra vibrating noise - i.e. loose speaker, printboard or what do I know.
This does not occur on the phone I purchased yesterday, waiting for the other at the repairshop.
Does Telenor and Apple think I will accept the repaired brand new phone?
NOT!
TCB

DCN Case Study 3: ONS 15454 Linear Topology with DCN Connections at Both Ends Using OSPF

Hi, I need advise regarding design of Network Connectivity - DCN Case Study 3: ONS 15454 Linear Topology with DCN Connections at Both Ends Using OSPF.
Am I need area 100 and 200 on Router 1 and Router 2 or I can don't do that?
Am

EIGRP and Load Balacing Per Packet CEF required on both ends???

Here's what I have.
-2 T1's with same EIGRP metric
-CEF is enabled and load sharing currently
1 Link is being used more than the other due to nature of load sharing and not per packet using CEF.
I need per packet setup to see if this improves performance and distributes the usage over both links effectively.
If I enable per-packet on my remote office, do I also have to enable it on each PVC that connects back to my central office per PVC. Or can you enable per packet on the remote location only and be ok? I dont have control over central office router and need to justify if I need to enable that on the Central office or not.
Cisco docs I reviewed on this doesn't say both ends.

I agree with Sundar's point about needing to configure both ends if you want to use per packet in each direction. His point about the implications of forcing process switching and its impact on CPU utilization of the router is true but I am not sure that is what the original post was asking about. As I understood the original post he was asking about the per-packet option available with CEF switching which does not produce process switched packets.
I have one caution to offer about turning on the per-packet option with CEF. If you do that you will probably get better - but still not even - balancing of the serial links. But the performance may not improve. In fact it may degrade. This is because doing per packet balancing introduces the liklihood of out of order packets. The impact of out of order packets varies depending on the application being run and the impact of out of order packets. Many applications when they get an out of order packet will discard the packet and retransmit packets to get them in the correct order. I actually know of one customer site where they enabled per packet balancing and the performance of the application got worse. So I suggest that you evaluate carefully the implications of per packet balancing.
HTH
Rick

Using both ends of a stylus

Hi all!
I am using a touchscreen and a stylus, and I want to capture the events generated by the stylus. Obviously, MouseListener and all the other MouseXXX classes allow to capture these events. However, the stylus has two ends, one is intended to draw, the other is intended to erase. Windows has no problems in distinguishing between both ends, but the MouseListener generates the same events no matter which end the screen touches.
Is there a way to distinguish between the two ends in Java? Is it possible with a MouseListener, or do I have to use another class/API? I am using WinXP and J2SE 1.5
Thanks.

Robert Kleindienst1 wrote:
I have two objects moving in a video and want to attach a line shape between them....
Have a look:
two circles, a 'dot' applied to each, the dots are moved by a behavior to rotate....
The line connecting them. is a bezier
no Motion Tracking needed
Just dragging the dot into the TrackPoint's dwell
And:
Select which points are tracked - see the red arrows:

Since my last software update the auto rotation on both my ipad air and my iphone 5c won't work. I have tried everything, including; checking the auto-lock - it isn't on lock. I've checked the settings in the Control Centre and they're as they should be.

Since my last update the auto rotation on both my ipad & my iphone has stopped working. I've done all the usual stuff to correct it but no joy. I've reset, rebooted, turned off then back on, checked all settings including those for the side switch and everything is as it should be except the rotation still doesn't work. There are no open apps, movies or videos that could be locking the screen so I am now totally stumped.
Any suggestions please?

The fact that gs.apple.com was in your host file to begin with is an indicator that your computer was used to jailbreak or hack an iOS device at some point in the past. You can not get help here for a hacked or jailbroken device. If your phone was hacked or jailbroken, Apple won't touch it.
RecBoot and Tinyumbrella are hacking tools.
Google "iPhone DFU mode".
Try restoring in DFU mode. If that doesn't fix it, make an appointment at the genius bar and see what Apple has to say about it.

Want to configure IPSEC on both end of the routers

Hi Gurus,
Currently have a project to configure encryption for both end point to point of site locations. How can I go about IPSEC configuration and ANYway to verify that the IPSEC configuration really working or not..?
I am using router 1760 for your info..:)
thanks!

The one you included in the match traffic command within the crypto.
You should have something like:
crypto map Core2Core 1 ipsec-isakmp
set peer [peer ip]
set transform-set [policies]
match address 101
access-list 101 permit ip [source interesting traffic] [destination intereresting traffic]
Please rate helpful posts.
Thanks

Skype dropouts now both ends using Infinity

My son lives in a hospice in Hereford and we keep in touch daily via skype.
Over the last few days infinity has been installed at my sons hospice and ever since then I have been having receive dropouts / hangs about every 5 seconds. Both ends of the conversation are macs using Mac OS X 10.8.5.
Before this 'upgrade' the connection was slow but quite usable, I just cannot understand why this should be occurring. Any suggestions?
Just for info as it is a new connection I do not know what HH is installed (although I would expect HH4, I have a HH4), I assume that the connection is Infinity 1 as I checked performance and it was around 30Mb/s on Wednesday.
There is an added complication in that there is a wireless connection from the main site to the actual residence by line of sight which was installed and is supported by a 3rd party.

Skype has a known problem ATM and it's being worked on. It has nothing to do with BT or your connection.
Hopefully Microsoft (now own Skype) will have it resolved quickly.

How to turn on auto fade?

When I flatten my comp I don't see the auto fades between the regions. How do I turn it on?

because Apple has most of its products, phones tablets and software that start with small letters despite being proper nouns, in Apple's world it's normal to use small letters for proper nouns and start sentences with small letters.
you will have to get used to the shift button and get a bit slow on your typing. after some time you'll get used to it.
this does sound frustrating but i agree with other users that the fact that you are using an expensive Mac does not relegate you to inferior word processors. go ahead and install office for Mac and enjoy!

Auto fade on both ends?

Similar Messages

Maybe you are looking for