Auto fill is not working

ok, second question (still no free sex for a correct answer, sorry)
My i-book G4, which I bought used, does not seem to have an auto fill capability. I have looked in System Preferences but do not see anything regarding autofill. Any ideas?
Signed 'tired of typing my email addy' in Vermont

I also have "Other Forms" checked in Safari, so that shouldn't keep it from working.
I may be wrong about this, but I think autofill may work better on some sites than on others. It seems that with my mailing address, I have to fill it out manually sometimes, and other times it will autofill. Also, if you delete cookies, you have to fill in manually. At least in the OS I am running, which is not the one you would be running.
Good luck!

Similar Messages

  • Upgraded to 8.3, now auto fill is not working. I have checked, rechecked my info, saved passwords, etc. to no avail. Is this bug in 8.3. Never did this until I upgraded.

    Upgraded IPad to to 8.3, now auto fill is not working. I have checked, rechecked "my info", "saved passwords", etc. to no avail. Is this bug in 8.3. Never did this until I upgraded. Wife is not happy I upgraded!

    Auto fill works for me in iOS 8.3.
    Try the standard troubleshooting steps in this order:
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
    Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
    See here for more details on restore: https://support.apple.com/en-us/HT201252
    If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

  • Auto Fill does not work

    I have a new iMac with Lion OSX. In Safari, I checked the box for auto fill to populate my demographic info in websites from Address Book. It does not work. Any suggestions?

    I am still using Snow Leopard on my iMac. I've done all that with the address book and Safari autofill preferences. I've had it that way for years, but in recent times, it seems to be completely useless, as every time I try to autofill a web form, all I get is this error dialog:
    "AutoFill completes webpage forms using information from your Address Book card or from web forms you completed previously. The information required by this form does not match any of the information available to AutoFill"
    Luckily, I use 1Password3 and don't have to rely on the random usability of the Safari autofill feature, but it would be good to know just what happened to make it so useless.

  • Google's Auto Fill will not work, how to fix it?

    I downloaded Google's tool bar some time ago, the Auto Fill component has never worked.

    Try Google Toolbar help. <br />
    http://www.google.com/support/forum/p/Toolbar?hl=en

  • My Safari Auto fill forms never works

    My Safari (V5.0.1 (6533.17.8)) Auto fill forms never works. It is precisely tied to my
    address book card. I get this message:
    AutoFill completes webpage forms using information from your Address Book card or from web forms you completed previously. The information required by this form does not match any of the information available to AutoFill.
    but every thing matches.
    And yes prefs checked to use address book.
    Any thoughts please? Thanks

    HI Steve,
    Open Keychain Access (Applications/Utilities) Select Passwords on the left.
    Delete the "Safari Forms Autofill" keychain.
    Relaunch Safari.
    Hope this helps...
    Carolyn

  • MSO - Auto play do not work

    Hello,
    I have a problem with an old app (single-edition) that I need to update.
    The Auto-Play is not working for two MSO I have. I saw few days ago that this was a bug with DPS and iOS 8, but I just read that now it's fixed:
    October 20, 2014
    iOS viewer fixes
    If multiple MSOs on the same page are set to Auto Play, only the first MSO auto-played on iOS 8 devices. This issue is fixed. (3835976).
    The problem is, I had 3 articles that did not work before this bug was fixed. I did update my articles and now, only one is okay. II have the same problem with the other two articles.
    What I got is an auto-play slideshow with two object states.
    Any help? Thanks.

    Hi, Nathan. I'm new to this post, but am having a similar issue. I do have Adobe Content Viewer v32.3, so it doesn't sound like that is the problem. I have a 5-state autoplay MSO that works perfectly in the desktop viewer, but won't play on the iPad. It originally existed in a v32 folio, but I created a v26 version just to test it; however, that doesn't work, either. I thought it was possible that it's too large (it was entirely vector made up of a lot of people icons that eventually fill the entire "page"), so I tried creating it using low-res JPGs. Still won't work. The odd thing is, there is another autoplay MSO in a separate article in the v32 folio that works without a hitch.
    I've posted the article files to this DropBox URL, just in case you're inclined to take a look. https://www.dropbox.com/sh/ue81hx4ee6t79zz/AACJ1Dkh-94_2oKFlyYmdV48a?dl=0
    Any help would be appreciated.
    Thanks!

  • Auto-Deployment is not working in Eclipse - Weblogic

    I have created weblogic server instance in Eclipse.Then, I have added one project into weblogic server by using "Add/Remove Projects" menu.After I start the server , I logged into admin console and checked the deployments link. I am not finding the project listed in the list.I have selected option "Run stand alone web module directly from work space" in web logic server configuration window in eclipse.
    I am using Eclipse 3.3 and weblogic 10.0.
    I have no idea, why auto-deployment is not working.
    I would appreciate your help on this regard.I have contacted Eclipse Support, they have asked me to contact BEA team.
    Thanks,
    Prakash.A

    Hi Prakash,
    The "Run standalone web module from workspace" doesn't publish the application to the server (instead the app is deployed to a temp location).
    This is mainly to help test the app during the development stages. If your app is complete and would like to publish to the server then you might want to try the following option
    - In Server View, double click on the configuration to launch Overview
    - Select "Copy stand-alone web module into separate deployment folder"
    - Save the configuration
    - Start the server
    The application would be deployed to the server as a WAR file.

  • Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5?

    Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5? My iMatch is turned on and I can direct downlad my music to the iPhone from the Cloud; however, I want to direct import All of my music from iTunes to my iPhone 5 via the connecting USB cable and it is not working. Yes, I have tried restarting both devices, and no autosync is not working nor is is it providing the avaialbile option to select music in iTunes on my Mac to then sync. Please help. Thanks

    Please disregard. I figured it out. Answer for anyone else running into this problem: You have to turn off iTunes Match on both devices. Apparently, if you activate iTunes Match it deactivates your abiltiy to direct sync.

  • After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    Additional testing i perform to make wifi work but nothing works out:
    i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
    wifi was working with older software versions. i think there should be a problem with 8.1.1.
    is anyone has fix for this issue?

  • My Auto-Brightness is not working on my iPhone5

    My IPhone5 auto-brightness is not working I don't know if it is a bug or what please help. Thank You

    Destinie Harris wrote:
    sberman wrote:
    Resetting may help.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    You only want to do this if your iPhone won't turn on or off and is completely frozen. Instead, try Resetting all settings in Settings > General > Reset > Reset all Settings
    I completely disagree.  Reset All Settings (your suggestion) would reset the OP's preferences and settings.  By contrast, resetting the iPhone (as I suggest) changes no preferences, settings, or any other data.  It simply starts the iPhone over, with no data loss.

  • My auto updates are not working. I cannot find where to download Camera Raw 8.1 for Photoshop CS6.

    My auto updates are not working! I cannot find where to download Camera Raw 8.1 for Photoshop CS6 (Windows 8 64 bit). My Camera Raw is now at 7.1. I had the online Adobe folks tell me to just download all updates manually. That's great, yet I cannot find camera raw 8.1 to download...
    Please help.
    Thanks, Janet

    there's a direct download link on this page: https://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now- available.html

  • Auto backlight does not work on 4S with iOS 7! With iOS 6.1.3 I had the same problem.Why?

    Auto backlight does not work on 4S with iOS 7. I had the same problem with iOS 6.1.3! Why ?

    rlwebb71 wrote:
    ... I have the latest generation iPod touch, not the 5, but the latest. So why can't Siri come out and play? 
    Siri is not a feature of that iPod... 4th Gen...
    iOS 6  Which Software for Which iDevices...
    http://support.apple.com/kb/HT5457

  • My auto-lock does not work properly in this new iOS 6

    My auto-lock does not work properly in this new iOS 6

    Do you have your Assistive Touch on? Per another user in another forum:
    Source: http://forums.imore.com/ios-6-forum/240631-auto-lock-not-working-ios-6-a.html. Username: Chambaka
    Okay, I did a 'reset all settings' in settings and problems fixed. Hope this can be useful for others.
    Edit: it appears that when the assistive touch is on the autolock function won't work while in the home screen, but will work if opening a app. I hope Apple fixes this bug in the next update.
    I tried what he said and my auto-lock's working again - so, I turned off my Assistive Touch. Hope Apple fixes this bug soon,

  • Versamail Auto-sync feature not working with AOL mail w/Treo 700p (Verizon)

    I'm having a problem with the Auto-sync feature not working with my 700p (verizon) with my aol mail.  It had worked perfect since May 2007.  Just started having problems End of April 2008.  Sounded like I needed another incoming mail server from aol other than:  imap.aol.com, aol told me they also use pop.aol.com, that isn't working either.  I get an error message that says "last auto-sync attempt failed."....Anyone else having this issue?  I'm trying to decide whether to get rid of my aol mail of 14 yrs and use other address to continue using versamail 3.5  or keep aol and use Verizon Wireless sync.  I do not like how wireless sync sends mail to outbox and then syncs vs sending right away.   Please help...
    Post relates to: Treo 700p (Verizon)

    I am having the EXACT same problem: Palm 700p, Versamail, AOL, Verizon. 
    It started about 1 month ago.  The GET still works, but AUTO-SYNC does not...After spending hours on the phone with Palm tech support, and reaching someone who said AOL had changed something in their servers.  They suggested TRYING Chatteremail, another Palm product.  I have tried it for 20+ days out of the 30 days you get for free.  It works pretty well, but NOT every e-mail that goes to my AOL acct is making it to my phone.  The thing that's great about Chatter is that can be "live" all of time.  Not auto-syncing every 15 minutes.
    It's very frustrating....The same way the Versamail just stopping auto-syncing is very frustrating.  With Versamail, sometimes I did not even get the error message.  If Chatteremail worked consistently, I would bite the bullet, and pay for it, but to pay for it, and have it not pull down all the e-mails, all the time is not good.
    I spoke to Palm Tech Support in N. America today, and they say the way AOL uses IMAP servers is in a non-traditional way, and it's very hard to deal with.  They suggest ditching AOL, and using something reliable for syncing purposes like GMAIL.  It's just hard to cut the cord.  The man I was on the phone with knew of my problem, and he solved it by getting rid of AOL.  It's just tough, since so many people have the e-mail address for me. 
    On http://mobile.aol.com/aolproducts/mobile-email/mai​l-client
    there seems to be some indication when you click on Smart Phones on left, that Coming Soon is Palm, but I don't know if that's going to be downloadable for 700p, or Palms moving forward.  Or how far away that is.
    I tried wireless sync and hated it.
    This is really a pain in the butt.
    *** Who did you speak to at AOL? 
    *** How did you reach them?  e-mail?  phone #?
    I also did a search and found another program called "Snappermail", which I might try, and see if it's any better than Chatteremail.
    http://www.handango.com/SoftwareCatalog.jsp?jid=24​BX5EEAD31DXE6AB588D59X31E95BD5&osId=904&siteId=1&N​...
    If you find anything out, please let me know here, ok?  This is very bad for me. 
    Post relates to: Treo 700p (Verizon)

  • Auto hide taskbar not working with iTunes 10.5 & Windows 7

    Anyone else having problems with Auto-hide Taskbar not working when iTunes is open and the active window? Was working fine with previous versions including the beta of 10.5 I had. Is this a general problem or just me? Im using Windows 7 64bit for what its worth.

    Chiming in with the same problem. 64-bit Win 7 Professional, taskbar set to auto-hide, newest version of iTunes (actually uninstalled and reinstalled via the website download earlier today to see if that would fix it; nope). I normally use the Alt+Tab keys to navigate between windows anyway, so it's not inconveniencing me too much, but it's still irritating when I'm trying to use the mouse to switch windows (or check the time) and realize I can't. Definitely fix this one soon. We'll all be very grateful

Maybe you are looking for

  • Report Generation

    i have a object help me regarding this..   How to create an Vendor Performance report ..? Create a Vendor Performance Report, Which lists the vendor name, Materials supplied, planned and Actual Delivery Times, Payment terms and prices. iam very new .

  • WOW!!!!  Added 1GB ram to Macbook Pro C2D - Now Aperture Flies!!!!!

    I now have 2GB or ram in my 2.16Ghz C2D - - Aperture is a lot faster - it's actually a night and day difference on my setup!!! Yay for dual-channel!!!

  • Use of nls_length_semantics parameter

    What is the use of nls_length_semantics pratamter? And what is the difference if setting nls_length_semantics='CHAR' instead of 'BYTE' Thanks in advance

  • Process- For Unique

    hi In a form we can create a process for checking Null or not but for Uniqueness we don't have a process, is there any way to created a process for checking Uniqeness becoz when i enterring empno in the emp table when the empno already in the table a

  • I am unable to connect my new LaserJet CP1525nw to the wireless

    I already have 2 other HP printers and I only had to type the IP info and they are connected. my IPs are wierd, my printer and computer IPs are xxx.xxx.1.xx and my Gateway IP is xxx.xxx.0.1 and now when I try to enter these info on the printer it wou