Auto flagging of low resolution links
Hello again
In a large document with many links, is there an indesign trick to detect or flag all the image blocks which are below a specific effective dpi (not actual dpi) resolution? That would be great as a reminder for the pages which are not proper for printing. It easily shows in the links Panel but it does not show as an alarm on the actual spreads, while it should, to prevent from going to press with faulty spreads.
Thanks,
Oof! Your remark "easily shows in the links Panel" didn't prompt me to recognize CS4 (it's early morning over 'ere).
Yeah, live Preflight has saved my life a couple of times. I created a few custom preflights: one for pure text, one for grayscale work, and one for full colour work, and use whatever is appropriate for the current job. If you tinker a bit with the settings, you don't get irrelevant (for you) warnings, and it's time spent well to get it right -- now I'm tuned to seeing the happy green light at the bottom of the window.
Similar Messages
-
[SOLVED]Terminal at Lower Resolution
Hello,
I am on Arch linux with Gnome (GDM) and I have a question-
1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau), till I installed nvidia-340xx. If it makes sense. How to know if I have Optimus enabled ? (I didn't follow optimus part of the wiki and I ASSUMED I don't have optimus)My laptop is Toshiba Satellite - A665-S6070
I also did
Tips and tricks
Fixing terminal resolution
Transitioning from nouveau may cause your startup terminal to display at a lower resolution. For GRUB, see GRUB/Tips and tricks#Setting the framebuffer resolution for details.
GNU nano 2.2.6 File: /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.76 (buildmeister@swio-display-x86-rhel47-01) Thu Jan 22 12:12:24 PST 2015
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 75.0
VertRefresh 43.0 - 72.0
Option "PreferredMode" "1366x768"
ModeLine "1366x768" 72.33 1366 1414 1466 1526 768 770 775 790 +hsync +vsync Interlace
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768"
EndSubSection
EndSection
/var/log/Xorg.0.log -
[ 418.253]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 418.253] X Protocol Version 11, Revision 0
[ 418.253] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 418.253] Current Operating System: Linux Arch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 418.253] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08402ce0-a410-4f2d-aa05-6afb4296c9e1 rw quiet
[ 418.253] Build Date: 14 March 2015 06:45:50PM
[ 418.253]
[ 418.253] Current version of pixman: 0.32.6
[ 418.253] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 418.253] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 418.253] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 04:56:20 2015
[ 418.290] (==) Using config file: "/etc/X11/xorg.conf"
[ 418.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 418.333] (==) ServerLayout "Layout0"
[ 418.333] (**) |-->Screen "Screen0" (0)
[ 418.333] (**) | |-->Monitor "Monitor0"
[ 418.333] (**) | |-->Device "Device0"
[ 418.333] (**) |-->Input Device "Keyboard0"
[ 418.333] (**) |-->Input Device "Mouse0"
[ 418.333] (==) Automatically adding devices
[ 418.333] (==) Automatically enabling devices
[ 418.333] (==) Automatically adding GPU devices
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 418.371] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 418.371] Entry deleted from font path.
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 418.371] (==) FontPath set to:
/usr/share/fonts/misc/
[ 418.371] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 418.371] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 418.371] (WW) Disabling Keyboard0
[ 418.371] (WW) Disabling Mouse0
[ 418.384] (II) Loader magic: 0x815d80
[ 418.384] (II) Module ABI versions:
[ 418.384] X.Org ANSI C Emulation: 0.4
[ 418.384] X.Org Video Driver: 19.0
[ 418.384] X.Org XInput driver : 21.0
[ 418.384] X.Org Server Extension : 9.0
[ 418.387] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 418.388] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 418.389] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 418.392] (--) PCI:*(0:1:0:0) 10de:0a75:1179:fd30 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[ 418.392] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 418.392] (II) LoadModule: "glx"
[ 418.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 419.025] (II) Module glx: vendor="NVIDIA Corporation"
[ 419.025] compiled for 4.0.2, module version = 1.0.0
[ 419.025] Module class: X.Org Server Extension
[ 419.026] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 419.035] (II) LoadModule: "nvidia"
[ 419.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 419.099] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 419.099] compiled for 4.0.2, module version = 1.0.0
[ 419.099] Module class: X.Org Video Driver
[ 419.105] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
[ 419.105] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 419.106] (--) using VT number 2
[ 419.162] (II) Loading sub module "fb"
[ 419.162] (II) LoadModule: "fb"
[ 419.162] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 419.182] (II) Module fb: vendor="X.Org Foundation"
[ 419.182] compiled for 1.17.1, module version = 1.0.0
[ 419.182] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.182] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 419.182] (II) Loading sub module "wfb"
[ 419.182] (II) LoadModule: "wfb"
[ 419.182] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 419.184] (II) Module wfb: vendor="X.Org Foundation"
[ 419.184] compiled for 1.17.1, module version = 1.0.0
[ 419.184] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.184] (II) Loading sub module "ramdac"
[ 419.184] (II) LoadModule: "ramdac"
[ 419.184] (II) Module "ramdac" already built-in
[ 419.195] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 419.195] (==) NVIDIA(0): RGB weight 888
[ 419.195] (==) NVIDIA(0): Default visual is TrueColor
[ 419.195] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 419.196] (**) NVIDIA(0): Enabling 2D acceleration
[ 420.273] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 420.274] (II) NVIDIA(0): Vision stereo.
[ 420.274] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 420.292] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[ 420.292] (--) NVIDIA(0): Memory: 524288 kBytes
[ 420.292] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.12
[ 420.292] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 420.297] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): CRT-0 Name Aliases:
[ 420.297] (--) NVIDIA(0): CRT
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): DPY-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-0
[ 420.297] (--) NVIDIA(0): DPY-1
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(0): DPY-EDID-f0d8f39c-e735-531b-2696-7b835139c44d
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0): EDID Version : 1.3
[ 420.297] (--) NVIDIA(GPU-0): Manufacturer : SEC
[ 420.297] (--) NVIDIA(GPU-0): Monitor Name : Seiko/Epson
[ 420.297] (--) NVIDIA(GPU-0): Product ID : 0x3641
[ 420.297] (--) NVIDIA(GPU-0): 32-bit Serial Number : 0x00000000
[ 420.297] (--) NVIDIA(GPU-0): Serial Number String :
[ 420.297] (--) NVIDIA(GPU-0): Manufacture Date : 2009, week 0
[ 420.297] (--) NVIDIA(GPU-0): DPMS Capabilities :
[ 420.297] (--) NVIDIA(GPU-0): Input Type : Digital
[ 420.297] (--) NVIDIA(GPU-0): Prefer first detailed timing : Yes
[ 420.297] (--) NVIDIA(GPU-0): Supports GTF : No
[ 420.297] (--) NVIDIA(GPU-0): Maximum Image Size : 350 mm x 200 mm
[ 420.297] (--) NVIDIA(GPU-0): Valid HSync Range : 47.4 kHz - 47.4 kHz
[ 420.297] (--) NVIDIA(GPU-0): Valid VRefresh Range : 60.0 Hz - 60.0 Hz
[ 420.297] (--) NVIDIA(GPU-0): EDID maximum pixel clock : 72.3 MHz
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Detailed Timings:
[ 420.297] (--) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.297] (--) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.297] (--) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.297] (--) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.297] (--) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.297] (--) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.297] (--) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.297] (--) NVIDIA(GPU-0): Image Size : 353 mm x 198 mm
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 4c a3 41 36 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 13 01 03 80 23 14 78 0a 87 f5 94 57 4f 8c 27
[ 420.297] (--) NVIDIA(GPU-0): 27 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
[ 420.297] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 41 1c 56 a0 50 00 16 30 30 20
[ 420.297] (--) NVIDIA(GPU-0): 25 00 61 c6 10 00 00 19 00 00 00 0f 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 00 00 00 00 23 5c 02 67 00 00 00 00 fe 00 53
[ 420.297] (--) NVIDIA(GPU-0): 41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
[ 420.297] (--) NVIDIA(GPU-0): 00 31 36 30 41 54 30 36 2d 55 30 31 0a 20 00 04
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 420.297] (--) NVIDIA(0): DFP-1 Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): DPY-2
[ 420.297] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- End of EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 420.298] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 420.298] (**) NVIDIA(0): been enabled on all display devices.)
[ 420.298] (II) NVIDIA(0): Frequency information for Seiko/Epson (DFP-0):
[ 420.298] (II) NVIDIA(0): HorizSync : 30.000-75.000 kHz
[ 420.298] (II) NVIDIA(0): VertRefresh : 59.998 Hz
[ 420.298] (II) NVIDIA(0): (HorizSync from EDID)
[ 420.298] (II) NVIDIA(0): (VertRefresh from EDID)
[ 420.298] (II) NVIDIA(GPU-0):
[ 420.298] (II) NVIDIA(GPU-0): --- Building ModePool for Seiko/Epson (DFP-0) ---
[ 420.298] (II) NVIDIA(GPU-0): Validating Mode "1366x768":
[ 420.298] (II) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.298] (II) NVIDIA(GPU-0): Mode Source: EDID
[ 420.298] (II) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.298] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.298] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.298] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.298] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.298] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (II) NVIDIA(GPU-0): Viewport 1366x768+0+0
[ 420.299] (II) NVIDIA(GPU-0): Horizontal Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Vertical Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Base SuperSample x4
[ 420.299] (II) NVIDIA(GPU-0): Base Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Distributed Rendering 1
[ 420.299] (II) NVIDIA(GPU-0): Overlay Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Mode is valid.
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.299] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (II) NVIDIA(GPU-0): Extra : Interlace
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 60 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 65.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1344
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 70 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 75.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1328
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 78.75 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1040
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1136, 1312
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 800
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 85 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 94.50 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1072
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1168, 1376
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 808
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1152x864":
[ 420.301] (II) NVIDIA(GPU-0): 1152 x 864 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1152, 1216
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1344, 1600
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 864, 865
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 868, 900
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1376
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1488, 1800
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1000
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 148.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1011
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1328
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 75 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 135.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1296
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 157.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1072
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 162.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 65 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 175.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 70 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 189.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 202.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 85 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 229.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 204.80 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1920
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2120, 2448
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1394
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 261.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1888
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2104, 2456
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1417
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.303] (II) NVIDIA(GPU-0): 1856 x 1392 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 218.30 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1952
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2176, 2528
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1439
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.304] (II) NVIDIA(GPU-0): 1856 x 1392 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 288.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1984
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2208, 2560
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 60 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 234.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2048
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2256, 2600
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 297.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2064
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2288, 2640
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "320x175":
[ 420.304] (II) NVIDIA(GPU-0): 320 x 175 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 175, 191
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 192, 222
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x200":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 222
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.305] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "360x200":
[ 420.305] (II) NVIDIA(GPU-0): 360 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 17.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 360, 378
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 414, 468
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 223
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 240 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 12.59 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 400
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 245
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 262
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 73 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 332
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 352, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 244
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 260
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 360, 420
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 250
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 348
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 254
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.306] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 56 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 412
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 512
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 301, 312
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 20.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 420
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 484, 528
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 314
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 25.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 428
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 488, 520
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 318
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 321, 333
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 75 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 24.75 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 408
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 528
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 312
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.308] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 28.15 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 416
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 524
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 315
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.308] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) Nkarol wrote:
newguy wrote:These commands give no such file or directory
Did you install uvesafb?
Install v86d from AUR
This was my first time installing from AUR so I think I installed it, "pacman -Q v86d" gives me output "v86d 0.1.10-5".
Prepare the system
Remove any framebuffer-related kernel boot parameter from the bootloader configuration to disable the old vesafb framebuffer from loading.
$ grep vga /proc/cmdline
$ grep -ir vga /etc/modprobe.d/
Should return no results. If you do have a vga= option somewhere, you will need to remove it.
It didn't
GRUB
Note: This might not work.
First edit /etc/default/grub commenting the GRUB_GFXPAYLOAD_LINUX=keep line.
Then regenerate grub.cfg via the standard script:
# grub-mkconfig -o /boot/grub/grub.cfg
Did this
Then I also configured the file /usr/lib/modprobe.d/uvesafb.conf: (It wasn't empty) , so yeah. I think I installed it.Is there any other way to check ?
Last edited by newguy (2015-03-21 10:21:29) -
Low resolution albumart when connected to 'made for Ipod' ICE-systems.
I've recently installed a new stereo in my car. It is 'made for Ipod', and should therefore work great with my new Ipod Touch (3G) 32GB. And it does, in all ways but one. The albumart, shown on the stereo, looks really poor (with low resolution).
I've spent some time looking for info in this matter on the net. Apparently the same problem occurs with many different brands of ICE-systems (In Car Entertainment). According to posts on other forums this problem came with a recent firmware upgrade (v3.0?), and possibly has something to do with coverflow. Older versions of Ipods apparently shows crisp albumarts on these stereos (can't confirm this, my Ipod is too new).
Since it seems it could be a software related problem, can one expect a fix in future firmware upgrades? Or is this something I/we have to live with (due to limitaitons in the hardware)?I'm having a similar problem. I can pair my ipod nano with my BT speakers first time and work perfect, but the next time I try to play music through the speakers I MUST do a manual connection beacuse the nano not auto connects with ANY paried devices. I mean, the BT speakers appears as paried, but not connected
I am extremely frustrated too.
Any idea?
Tested with diferent devices with same behaviur. -
Simulating high and low resolution
Edit: I'm using CS5
I'm clueless about creating an effect to an existing image.
I want a very small center point of the image to be unchanged. Just outside of the center should appear as if it's slightly lower resolution, and the further you go from the center the lower resolution it appears. So by the time you get to the edge of the picture it's not easy to tell what you're seeing.
I think I want to do this one of two ways. I don't know which will look better or is possible.
1. Pixels combined to be the same color, perhaps some blur effect that increases away from the center, or,
2. An overlay of scattered black pixels only, with the concentration of black pixels increasing away from the center, or
3. the above two combined.Hello Rich,
The actual excitation voltages you are reading don't go through the amplifier on the SCXI-1520. Therefore, when the excitation signals are included in the scan list, that can confuse NI-DAQ. If you look at the reading from the channel of the SCXI-1520, it will be off, but it will be off by a factor. What's happening is that when you read from the channel and then read from the excitation signals, no gain is being applied to the channel (even if you insert a range of +/- .1 V) but NI-DAQ thinks a gain is applied. So, NI-DAQ divides down the voltage even though it doesn't need to.
For instance, if you read from the channel of the SCXI-1520 first and include a limit of +/- 0.1 V, NI-DAQ thinks a gain of 100 will be used. The 1520 appl
ies no gain so your reading in LabVIEW will be 100 time less than it should be. This just happens when you are trying to apply a gain to a channel prior to reading from the excitation signals. I haven't found a source that says this, but my testing has pointed this out.
With regards to the PXI-4220, it should act the same way. If you take a look at the block diagram of the SCXI-1520 and the PXI-4220, both have the excitation signals (P+, P-) going directly to the multiplexer without passing through the amplifier. So the setup of both devices look the same. You can find the block diagram of the devices in the user manual's which I've linked below.
SCXI-1520
http://digital.ni.com/manuals.nsf/webAdvsearch/9CB6AB6E04D6510586256DF3007AD256?OpenDocument&vid=niwc&node=132100_US
NI PXI-4220 User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/F93CCA9A0B4BA19B86256D600066CD03?OpenDocument&vid=niwc&node=132100_US
Regards,
Todd D.
NI Applications Engineer -
Duplicate Image object in PDF file with low resolution
Hi all,
On creating images in bitmap mode using illustrator into eps format and convert the eps file into pdf using acrobat distiller.
On pdf file its showing two objects in the content panel with one object present in low resolution other one same as its original.
It will not happen in direct pdf from illustrator
Please anyone help on this.
Note: It will not happen in grayscale mode.
Regards,
Jaya KrishnanHard to follow what you are experiencing, can you post screenshots?
You may want to experimnent with your .eps settings, especially preview & inlcude linked files since you have duplicate images. -
Why are images low resolution when I send packaged files from InDesign?
I am a new InDesign CS5 user. I packaged a file and sent it to a coworker but the illustrations that she received were low resolution. My original file had high-res images. Am I doing something wrong when packaging the links?
Thanksyou have to package the link folder also
-
Sharing Indesign on CC show low-resolution images and not the right font in preview
Dear Adobe,
I really want to make use of CC Files and the sharing ability with my clients. I have shared an Indesign file, whereas all the links in that indesign file are on CC Files too. The font is a regular Futura Std. But both the links in the files (background and logo) and the font used are not showing up correctly. I deleted the file and uploaded it again, but it is still showing a bad preview. This is not something I can share with my clients.
Am I doing something wrong? It appears that another Illustrator file is showing its preview in low-resolution and after 2 seconden it renders it at a higher resolution.
Regards,
DanielFonts may not and links will not show up correctly in the image preview on the Files page. The preview being created on the server is not able to access the links, and only the default fonts are available.
You can export a PDF and share this with your clients (and you can always include a link to the InDesign files if the clients need to download them). -
GT60 3K IPS black borders around the screen on lower resolutions
I've got an MSI GT60 with 3K IPS display and GF880M and although it's a very powerful machine it sometimes isn't fast enough to play the games with the native resolution on high details, therefore in several games I wanted to lower the resolution to get a better experience. However this is where I have a problem, because if I change the resolution in-game what usually happens (80% of the games I've tried) is the screen is getting smaller and I have back borders around it. This is kind of frustrating and I wanted to ask if you know any way of sorting out this issue. I'd like to be able to play a game at 1080P for example but have it stretched to the whole screen.
Some of the games I've observed this behaviour:
1. L.A. Noire
2. Assassin's Creed: Black Flag
3. Far Cry 3
4. Max Payne 3
I've tried lowering the Windows resolution prior to opening the game but it makes no difference. I've also looked at the nVidia Control Panel because some of the versions of the drivers had the option to stretch lower resolution to full screen but in the latest one I couldn't find it.
As the result of this I'm feeling a little frustrated that although the notebook itself is one of the most powerful ones available on the market I cannot play it the way I wanted and I begin to think paying extra for the 3K display was a mistake a I should've gone with the 1080P version. But I hope there's a fix for this issue.I've found a workaround but it's very annoying as I have to apply it everytime I launch a game (or if I accidently alt-tab back to windows desktop).
1. Run the game and let it launch with the back borders
2. Ctrl+Alt+Del and go to desktop (don't Alt-Tab, it won't work)
3. Open Intel Graphics properties, change the resolution to 3k, apply changes, than change it back to 1080P or whichever you like and mark the Desktop Stretching option. Apply changes.
4. Back to the game and the black borders should now be gone.
It's a workaround, not a solution. I'd really like that MSI, nVidia or whoever is responsible for this behavior find a permament fix. -
Is it possible to convert recording to lower resolution ?
Hi folks,
I am using Adobe Captivate, 3 and is it possible to reduce the recordings to lower resolution with out loosing the content ?
I have recording once in higher resolution and this has created an issue like the Play back controls are not visible while playing the project.
Advice..
Regards,
ShashiHi there
Unfortunately one of the hard facts of Captivate life is that any rescaling will inevitably result in a loss of clarity. The degree to which things suffer will depend on exactly how much rescaling occurs. This is because Captivate stores the image information in a raster format. This means a matrix or grid of pixels (picture elements). Think of it as a mosaic of dots that composes the picture. When you scale down, the dots overlap and the computer has to calculate new color values for each of the overlapped areas. As the new color value is a blend of what was once there and what is now there, you see a loss of fidelity.
The bottom line is that the best results are obtained by not having to rescale at all. So you need to carefully plan the initial recording and consider the ways in which you might avoid this issue.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Web graphics / images display in low resolution on any web browser
Hi everyone.
This issue has had me stumped for a few months now. I never noticed this issue with Snow Leopard but now with Lion I have noticed that web graphics display at a significantly lower resolution. I switch between Google Chrome and Safari and the issue is present on both browsers.
Basically any website with graphics, or images will be pixelated and lacking in fine detail. It is painfully obvious when browsing sites like Flickr and 500px. In these cases, my own personal images look terrible online, but look absolutely normal in my Lightroom library, so I know it's not a strange display issue on my Mac.
I'm just curious if anyone has had a similar issue, and if you have figured out how to resolve it.
Thank you very much!
- Abrami have the same issue with safari on my mac. i'm not sure if i have snow leopard or not. all i know is i am on a G4 with mac os 10.5.8 and have safari 5.0.1. last week, i could not watch certain video clips online, because {as it stated in my browser where the video should be} i did not have the most recent flash player. but when i went to download the most recent version, it told me it would not work on a power pc mac. so i researched and found out i had to use the flash 10.1.102.64 player... it's the most recent version that will work on a power pc mac. so i uninstalled the flash player i had on my mac and installed this player. all well and good... now i can see the videos.
but what's not well and good is that i no longer have hi-res images in my browser. all images are pixelated and unclear. i posted on the adobe forum to see if i could get an answer as to why.
here was my post/inquiry...
"I recently upgraded my Flash Player so that I could view internet content (such as videos) that were not available to me before I upgraded. Ever since, the images on most web sites that I visit are now pixelated (look very low-resolution). I had not made any other changes to any settings on my computer or software. The browser I use is Safari 5.0.1. I had to upgrade to the Flash Player 10.1.102.64 because I am on a PowerPC Mac G4, and that is the most recent version of Flash Player that will work with Power PCs.
Anyway, now that I have upgraded (which included first uninstalling the old Flash Player), my images look pixelated... most do, anyway. For some reason images I post to flickr appear okay on screen. But normal 72dpi images on standard web sites (like Yahoo) appear very lo-res.
Does this have to do with whether or not my Mac's operating system is 64-bit or 32-bit... or the Safari software... in relation to the Flash Player's... whether or not they are compatible? If not, I have no idea why this would have changed since upgrading my Flash Player. And if so, what can I do to get around it? I'm somewhat computer savvy... but not this much. Can someone please help me so that I don't have to pay $39 to call Support and ask them?"
here was their reply...
"Sounds like the installation went pear-shaped somewhere. Try it again using the method described here:https://discussions.apple.com/thread/2805854?start=0&tstart=0
Or maybe they'll know what the cause of your pixelated images is."
but the discussion link they gave me did not help. i had already done what it suggested. and i tried it again... still no luck.
help.... anyone!!!! please? -
Preventing importing of low resolution images?
I'm in process of moving a bucketload of images into a Lightroom library from various sources in the drives of the Macs at gome, and am having problem with Lightroom importing a bunch of low resolution images into the library. These files include various web exports and iPhoto library thumbnails etc. Now, this wouldn't be a problem, except:
1) I have no control over the "Don't import suspected duplicates" feature, so I don't know of Lightroom is importing a thumbnail version of a shot (with EXIF) or the original. I suspect is importing both, but can't be sure, and the import report is just too tedious to go through, as the total size of the import includes over 100k exposures.
2) Lightroom doesn't have a feature that'd let me search for scaled down images. I can't search by resolution, and the scaling flag search doesn't pick up images scaled outside Lightroom. I could throw away some shots with no EXIF data but exports with EXIF information retained cannot be thrown away from the lib.
Anyone here have ideas on how to solve this? A solution that causes Lightroom to ignore files that aren't of the size that's the same as a the camera original, or one that lets me search for resized images from a library would both suffice.dorin_nicolaescu wrote:
If you are going to judge whether to import or not by file size alone, an easy solution would be to:
Use Windows Explorer (or Mac search) to search you Pictures folder (and subfolders) for files smaller than, say, 300 Kb.
Delete them or move to another folder.
Import the clean folder into Lightroom.
Heh, I guess you missed a detail in my post. I'm importing more than 100.000 exposures contained in a few thousands of folders. The total size of the library that's been imported right now is about 650 GB. If I can't automate this, I can't do it.
I shuffled through the Lightroom plugin API doc and seems I can't create a plugin that'd automate this either, as there's no call to initialize the value from the plugin itself - had an idea to provide a searchable width/height metadata plugin myself but apparently that's a no go. -
Configure Xorg for lower resolution...
Hi folks,
I need some help trying lower resolutions on my laptop.
I's a Lenovo T61 with nVidia Quadro FX 570M graphics card (rev a1)
Installed the "nvidia" driver and used the nvidia-config to set the xorg.conf settings.
Max resolution is: 1680x1050 wich is working and is default..., I want to try out 1440x900 and 1280x800 (all three are 16:10)
This is my current config:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 23 15:33:27 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSection
Tried to add these lines under Section "Screen" but no change in the outcome...=(
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
Any hints?I mean static, not fuzzy if I set resolution to 1080p.
-
My Skype and Auto-recharge on low balance Story
I signed up for one of skype subscriptions, and I was ready to pay a monthly fee for this service. After some calls I noticed that I was being automatically charged after a few minutes while I was NOT expecting a charge until AFTER a month. Well...Found out my card was automatically and by default checked for the auto-recharge on low balance option! I did not choose this...and when I tried to explain to one of the skype representatives that this option should be a choice by the customer and not a default setting, she explained that "it is the default because you have the choice to cancel it"...She subsequently denied me any refunds, and told me to cancel the setting if I didn't like it. I bet that this was an issue that many customers had encountered, and I looked throught the community, and yes! the "default" was not an option that many customers liked, and when I tried to see if something had been attempted about it..resolved?no. class action suit? may be? Well....somewhere in their corporate policy/culture, and somewhere in their "I agree with terms and conditions" tons of pages, I might have signed away my rights to any class action suit!! HMMMM...guess all that's left now is to see, with my poor music writer/composer skills, if I can come up with a crazy-fun-interesting video about this that goes viral on youtube !
Hi, cecita799, and welcome to the Community!
Is your account part of a Skype Manager account? I ask this because you posted your enquiry on the Skype Manager message board; so if the answer is yes, the account manager may have added credit to your account.
If your account is not part of a Skype Manager account, you would have to log into your account on the Skype website, click on View Details in Payment Settings, and click Disable to the right of Auto Re-charge.
Regards,
elainem77
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
I'm guessing that my Powermac G5 Quad running 10.4.11 does support extended desktop. My present monitor is a 1600x1200. Can a second monitor of smaller size and lower resolution work as an extended desktop?
It should easily.
Power Mac G5: Display Compatibility
http://support.apple.com/kb/HT2707?viewlocale=en_US
Display Support:
Dual Displays*
Resolution Support:
2560x1600
Details:
Apple advertised that this system can support "two Apple flat-panel displays for each graphics card installed". The default graphics card can support "up to 2560 by 1600 pixels" with the dual-link DVI port and "up to 1920 by 1200 pixels" with the single-link DVI port. It also can support analog resolutions "up to 2048 by 1536 pixels".
http://www.everymac.com/systems/apple/powermac_g5/stats/powermac_g5_quad_2.5.htm l
"Quad Core" (2.5)
Video Card:
GeForce 6600
VRAM:
256 MB
Primary Max Resolution:
2560x1600
Secondary Max Resolution:
1920x1200
Display Connectors:
1 dual-link DVI
1 single-link DVI
http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-adc-ports-dvi- ports-resolutions-supported.html -
I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!
Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.
Maybe you are looking for
-
Alright people i have a problem and looking for help. Yesterday the iphone started acting funny, a couple apps started crashing and the Iphone reboot a few times on it's own. Things seemed to be back to normal and I notice a "system update" that need
-
Selective Time Capsule failure
I have had time capsule working well since March. It is backing up three Macs, a lap top wirelessly, and a mini and Mac Pro via ethernet. About one week ago, it began to fail when the Mac Pro attempted to back up. The mini and lap top continued to wo
-
Where-used list for class-based exception texts
G'Day, With traditional exceptions, one can look at a message, go to SE91 and do a where-used for that particular message. This is not possible with ZCX classes, a where-used can be done for the entire class but there doesn't seem to be a way to find
-
Characteristic and value field in profitability analysis document
hi, 1 in VF03, when i click the accounting button, i got the profitability analysis document. when i click on it, it shows display line items with tabs like characteristic and value fields. may i know where i can see the characteristic and value fiel
-
hello ther, I am a new to Labview. Can any body please help me on remote pannel controling. I have made a simple program. Now all I want to do is I want to control that Vi remotly from another PC connected in LAN. I have gone throught a pdf from NI'