Auto Focus on Camera...iPhone 4S any trick to making it work?

I do not seem to have auto focus on my iPhone 4S.  Didn't really realize it until using a business card munching app.  Auto focus only lightens or darkens, does not make words clearer as to take a picture of a business card is blurry no matter how I work the camera.  My sister's 4S works as it should.  Any tips?

Thanks for your replies everyone. I have contacted iheartradio as well regarding this issue.
I have updated all apps and have done the back up/restore from iTunes to no avail. I am not familiar with voice command/control in iheartradio.
Per my earlier post, this has been an issue for Apple before, in previous iOS iterations (in particular, Podcasts).
I have searched high and low for an answer which is why I posted here. I will update if I hear from iheartradio. I would be willing to be bed they say it's an Apple issue...

Similar Messages

  • Longer than usual to update iPhone 5s  any tricks

    I was asked to update the iPhone 5s when going to iTunes to make some room.  It has been at 2/3 bar with the apple icon for over 2 hours and no movement on the bar.  Do I unplug and turn it off and come back to try again or leave it.  I head out over seas in the morning and need the phone to work!

    I turned it off after unplugging from the computer.  Cycled it through one time of on and off.  Plugged it back in to computer.  Cycled off and on- now it is going through the restore process…Jeepers I hope this works

  • Auto pop-up for wispr in any captive portal won't work anymore

    Hi all,
    I really like the captive portal function. I am often at Starbucks, and I like the easy way to accept the user agreement.
    But, since some weeks, the auto pop-up to see the captive portal won't show ... neither Starbucks nor somewhere else!
    At Starbucks ....
    1. I tried to delete the btopenzone WiFi (the provider for Starbucks free WiFi) but nothing changed.
    2. I tried to set up another networking zone, won't help either.
    3. I searched the web, but all I could see is, that there is not really a way to disable it (but changing the website in plist somewhere).... 
    4. I  tried to find a way to just disable or enable it... but was not lucky
    Hope anyone can help me, cause I really like the feature.
    Thanks...
    Michael.

    Hi DelBaero,
    So, it sounds like push notifications are working intermittently. Take a look at the article linked below, not only does it give insight into how notifications work, it also provides some troubleshooting tips that should help.
    iOS: Understanding notifications
    http://support.apple.com/kb/ht3576
    Troubleshooting notifications
    Push notifications require an active Wi-Fi or cellular connection.
    Note: Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
    If you're not receiving notifications for a specific app, try these steps:
    Verify that the app supports notifications.
    After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
    Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
    -Jason

  • I recently done new update now my charger isnt compatabile on my iphone 5.Any ideas? It was working fine before update.

    I recently done new update on iphone 5, now its not charging on my charger because its saying its not compatible and it was working fine before update.

    are you using an apple branded charger?
    i have heard ramblings that they built in incompatibility with UNauthorized chargers for safety reasons after all that happened in china.

  • Using 'personal hotspot' successfully - any ideas for making it work?

    I signed up for a 'personal hotspot' on my Verizon iPhone4 months ago but find that it rarely works.  Have others been able to make it work?  Any ideas on how I can use it successfully?  I am using it in New York City.

    http://support.apple.com/kb/TS2756

  • Any way of making 5112 work using LabVIEW RT

    The 5122 and 5124 digitizers are supported using LabVIEW RT, I am trying to make the 5112 work but it is not seen by MAX and I just found a document on the NI site that says RT is not supported.
    Does anyone know of a work around (hack) to the INI files to allow MAX to recognize and work with the 5112?
    Thanks
    Randy

    Hi Randy,
    Currently we are not aware of any hacks or workarounds that will allow the 5112 to be supported in Real Time.
    Best Regards,
    Evan R.
    Applications Engineer
    National Instruments
    http://www.ni.com/support

  • E71 camera flash not working with auto focus

    I have using E71 from last 2 months . As of now i came to know its auto focus option by pressing '2' button. Before flash was working fine with auto focus option but from last 2 days flash light is not working with auto focus option and pictures clicked comes to be very dark. Can anyone suggest how to sort out this problem.

    sir can you tell why my e71 camera flash is not working .i have tried the hard reeset also.flash is also on .please tell because i dont want to go ot the nokia centre and i dont want to tell this to mu father

  • Having trouble auto-focusing using the digital display.

    My Rebel T3 seems to have problem auto-focusing indoors when using the digital display .  Seems to work fine using the viewfinder.

    Live View focusing is always going to be very slow.  It is not just your camera.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • Griffin RoadTrip not working with iPhone 3G any more

    Hi,
    my Griffin RoadTrip is not working any more with my iPhone 3G.
    Always message that this accessory is not compatible with iPhone, but before, it worked and now it doesn't any more.
    (On Griffin case, it's mentioned that the accessory is designed for iPhone 3G)
    any tricks for this?
    Thx

    Mine was working fine for about 6 months.  Then, I started getting a "not compatible message."  I called Griffin and they suggested a soft reset of the iphone 4s.  The message went away but now the FM transmitter is not transmitting.  Griffin sent me a brand new one (free) but the FM transmitter still does not work.  That tells me that the iphone changed -- probably after an update.

  • I can't use anymore my Belkin Tune Cast Auto LIVE with my iPhone. It was working fine before

    Hi! I am very surprised to find out that I can't use anymore my Belkin Tune Cast Auto LIVE with my iPhone. Any idea?

    Hi! I am very surprised to find out that I can't use anymore my Belkin Tune Cast Auto LIVE with my iPhone. Any idea?

  • HT201401 iPhone 5 camera not auto focusing

    Any ideas how to fix ?

    I took my iPhone 5 into the apple store this afternoon and after confirming the auto focus wasn't working properly, they replaced my phone.  New phone camera works perfectly.

  • Auto focus on my 2 year old T3i has stopped working, any suggestions.

    auto focus has stopped working.  camera is almost 2 years old.  I can take pictures at normal distance but if I try to take a picture that requires zoom it will not work and all my pictures are fuzzy.

    Check the lens and make sure the "AF/MF" switch is in the "AF" position (Auto-focus is on).  
    Do you own other lenses and does this happen with them?
    Are other functions of the lens working?  e.g. if you change the f-stop does it affect the exposure (showing that the camera is communicating witht the lens to control the blades.)
    Make sure the contacts on the body and lens are clean.  Clean them only with a non-abbrassive cloth (e.g. don't use a "pencil eraser" for example) because the gold plating on the contacts is thin and can be worn off if you use an abbrassive cleaner.
    Eject the battery from the camera... wait several minutes, then re-insert (this basically "reboots" the firmware.  Turning off the power switch doesn't "technically" shut it down... it puts it into a kind of "sleep" state.  But removing the batteries, allowing any capacitors with stored power to self-discharge, then re-inserting the batteries will cause the camera to boot fresh and this will sometimes clear up problems.
    It's also possible that there's a problem with the auto-focus mechanism in the lens itself and the lens would need service to repair it, but you may as well rule out other things before you resort to sending it in.
    Tim Campbell
    5D II, 5D III, 60Da

  • N95 - Does your camera clicks when auto focus (hal...

    N95 - Does your camera clicks when auto focus (half-pressed)?
    When i press the camera button half way through it makes a noticeable "click" noise after locking on an object.
    It doesn't make the clicking noise when i press the camera button one time without manually auto focus.
    Any ideas?
    Thanks

    Yep, exactly that.
    Green - Focus lock acheived - OK to take picture and it should come out in focus.
    Red - No Focus lock - will still take a shot if you fully press shutter button though.Message Edited by luckieb on 27-Apr-200708:37 PM

  • Tab 2 A10-70 Camera auto focus beep?

    I need some help here.  I can find no way to silence the auto focus beep on the tablet.  I see no option in the setting for the camera.  Also I have silenced the entire tablet and it still beeps when  the camera focuses.  Is there a way that I am just not seeing.  This is a real problem when trying to use in certain situations.  Any help would be appreciated. MDB 

    I think this is crazy. That is the most annoying beep, and I just spent like 45 minutes bouncing around various departments at Lenovo just trying to ask them to issue an update. The sound profile should let you silence the camera. Why doesn't it? Are there any alternatives? I use this in a business setting, and the beep makes the camera almost unusable. It is really loud.

  • Tandberg mxp 6000 camera auto focus

    Hello sir,
                  I saw the issue form Tandberg mxp 6000 camera auto focus.
    when I zoom the camera it focus image blurring after zoom out fully its blurring few minutes and its clear but its not focus correctly. I change camera and check the different location its same. conference room room size is approximately 15 to 18 feet length. pls tell any other option to solve the issue. I also do software upgrade and downgrade also.

    Does it matter? NO REGISTER packets arrived to server, i was sniffing traffic.
    Problem solved just after i entered valid DNS server address in IP parameters. Why would it need DNS if i'm using direct IP addresses...
    Anyways, my SIP server (Asterisk) does not support duo-video and because there is two video streams in SDP message, it choses wrong RTP port and streams other's side video to presentation channel.

Maybe you are looking for

  • Nano scrambles album pics and won't play vids music or pics nothing works

    i bought this ipod brand new about a month ago from apple. It has messed up three times since. What happens is that it just stops working. I can't view any pics, video or listen to music. my cover flow turns each album cover to rondom colors all scra

  • Hi! Since I've updated to os 10.7.2 I can't scan with my HP officejet 8500

    Please! Help. The printer is working but the scanner is not able to connect to the computer. I've updated the software too

  • Hr payroll reconciliation report

    Hello All, i have a Hr reconciliation payroll report and requirement is like After Payroll Monthly Run, Payroll Admin and FI needs to fetch detail report on employees actual and to be paid monthly earning components. Report will be used to analyze pa

  • Replace 2 Nodes in Cluster

    Have a 2 node SQL Cluster & looking for best way to replace these with two new servers. I was thinking of removing 1 SQL node and then remove node from windows failover cluster mmc. Then unplug crossover cable and plug into new server and make new se

  • JNI code to access to several C programs

    im now working in JNI and using a native method to access a C program can i acces two seperate c files in one JNI method? any one pls help me. regards prasad