Auto focus on my 2 year old T3i has stopped working, any suggestions.

auto focus has stopped working.  camera is almost 2 years old.  I can take pictures at normal distance but if I try to take a picture that requires zoom it will not work and all my pictures are fuzzy.

Check the lens and make sure the "AF/MF" switch is in the "AF" position (Auto-focus is on).  
Do you own other lenses and does this happen with them?
Are other functions of the lens working?  e.g. if you change the f-stop does it affect the exposure (showing that the camera is communicating witht the lens to control the blades.)
Make sure the contacts on the body and lens are clean.  Clean them only with a non-abbrassive cloth (e.g. don't use a "pencil eraser" for example) because the gold plating on the contacts is thin and can be worn off if you use an abbrassive cleaner.
Eject the battery from the camera... wait several minutes, then re-insert (this basically "reboots" the firmware.  Turning off the power switch doesn't "technically" shut it down... it puts it into a kind of "sleep" state.  But removing the batteries, allowing any capacitors with stored power to self-discharge, then re-inserting the batteries will cause the camera to boot fresh and this will sometimes clear up problems.
It's also possible that there's a problem with the auto-focus mechanism in the lens itself and the lens would need service to repair it, but you may as well rule out other things before you resort to sending it in.
Tim Campbell
5D II, 5D III, 60Da

Similar Messages

  • My 5 year old iPod classic will not play on my Yamaha CRX-332 cd receiver but my 3 year old iPhone 3g will.  Any suggestions to get my iPod to read the receiver or get the receiver to read the iPod?

    My 5 year old iPod classic will not play on my Yamaha CRX-332 cd receiver but my 3 year old iPhone 3g will.  Any suggestions to get my iPod to read the receiver or get the receiver to read the iPod?  The receiver should be able to play the iPod with a USB connection or with the iPod dock.  Neither works with my iPod however both work with my iPhone 3g.  The iPod has the latest software.  Any thoughts?

    If it is a 5-year old iPod, there is the possibility that the receiver simply won't work with the older software (there hasn't been an iPod Classic software update in years). You might try contacting Yamaha support (or doing a google search) to see if it is a known issue. One solution (probably the easiest) is to get a cable that connects a min jack (i.e., a headphone jack) to stereo cables, and just connect the iPod up that way. You eliminate the risk of corrupting the iPod, and it is a solution that should always work. Just use a wall charger to power the iPod.

  • I have latest firefox on my desktop and laptop, was working very well since threee years. Sudenlly has stop working both on my desktop and laptop. please help me.

    I have latest firefox on my desktop and laptop, was working very well since threee years. Sudenlly has stop working both on my desktop and laptop. please help me.

    Hello becky81464
    If you were able to load websites until you updated Firefox, your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) is likely preventing Firefox from connecting to the Internet, see [http://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet firewalls]
    see also : [https://support.mozilla.org/en-US/kb/configure-windows-firewall-allow-firefox-access Configure Windows Firewall to allow Firefox access to the Internet ]
    thank you

  • Printer is 4 plus years old and has always worked perfectly. when I turn it on I get error message

    Error message "remove and check color cartridge.  I did and also cleaned it but error message persiste

    Replace the cartridge with a new HP and try again.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • My iMac is only 2 years old, but has stopped playing DVDs.  I upgraded to osx Lion.  Could that be the problem?

    My Imac wont play store DVDs.  It will read files from a disc but not play movies.  It ejects the disc.  I recently upgraded to OSX Lion could that be an issue?

    Reinstall Just OS X, clean and try different DVD's to confirm all don't work.
    How to reinstall just OS X or erase/install OS X
    I double Lion is the cause, likely a DVD region issue or a bad Lion install.

  • I have OSX 10.5.8 on my powerbookG4, but it won't let me install the new firefox, and my old version has disappeared. Any suggestions

    I can't install firefox on mu powerbookG4

    Firefox 4 versions and later do not run on a PowerPC Mac and require at least OS X 10.5 and '''an Intel Mac'''.
    see [http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/ Firefox 9.0.1 System Requirements]
    '''The latest supported version for your os is 3.6.25 '''you can download from here:
    http://www.mozilla.org/en-US/firefox/all-older.html
    [http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
    For older Macs that aren't supported in Firefox 4+ versions if you like try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8
    http://www.floodgap.com/software/tenfourfox/
    http://tenfourfox.blogspot.com/
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • My charger has stopped working, it is only a year old and has no frayed or exposed wires.

    My charger is about a year old and has been working perfectly until today. It has no frayed parts or any wires exposed on it. i plugged it in and it wasn't charging and my battery icon on my monitor had an x on the inside of it and wouldn't charge. I tried again to charge it after it finally died and it didn't work, I used my mom's charger and it worked perfectly fine, so it isn't the batter that is having a problem. Has my charger just spontaneously stopped working or it is a common flaw that occours often with other users, and if so is there a soloution to fix it or get a discount on a new charger for what I am going to assume is a design flaw in the box on the charger because that is the only other thing I can think of that would be causing my charger any problems?

    I had a lightbulb once. Brand new. Screwed it in its socket, lit it up. 20 minutes later it was dead. It's "brother" from the same twinpak is still shining bright almost 2 years later. Same thing here. The manufacturing process only guarantees that the mean time between failures is adequately long. But the individual units follow a probabilistic bell curve: sometimes you get one from one end and dies right off, most times you get one from the middle and lasts awhile, occasionally you get one from the other end and seems to last forever.
    If you have AppleCare, it will be replaced for free. Else you will have to pay the $79 we all have. Of the 8 Mac portables I've owned, in only one did the power brick die on me. Replaced it at my cost, watched the Mac die a month later.

  • I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

    I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
    It might be a huge coincidence but the drive was working fine before i installed lion?

    Installing Lion would not cause the superdrive to stop working.  Are you unsure as to whether or no a cd/dvd is inside?  Something may be broken inside and you should consider bringing it in for service.

  • My mac is one year old and has the latest os x 10.9.5. Will the older creative suite run on my mac?

    Hello; I am planning on buying an older "unopened" adobe creative suite package that runs on Mac OS X v.10.2.4 through v.10.2.7. My mac is one year old and has the latest os x 10.9.5. Will the older creative suite run on my mac?

    you can check other users experiences, http://roaringapps.com/apps:table

  • The display on my 4 year old iMac has horizontal lines and gradations of gray. Is my machine on its way out? Can I fix the screen?

    My four year old iMac has developed horizontal lines and gradations of gray over the last month. Is my machine on its way out? Is there anyway to fix the display?

    If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
    Genius Bar Reservation

  • My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    That sounds horrible. There are a number of reasons it could occur.
    The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • My macbook is five years old and has become slow. often displays the whirling kaleidoscope. can anyone please give me advice on what to do?

    My macbook is five years old and has become slow. often displays the whirling kaleidoscope. can anyone please give me advice on what to do?

    Quite often the HDD is the source of the problems.  Look at this comprehensive guide for possible solutions:
    https://discussions.apple.com/docs/DOC-3521
    Ciao.

  • My 2 year old daughter has set a password on her ipod touch and now we cant use it!!! warranty has expired... any help as to how to solve this solution without having to pay £25???

    my 2 year old daughter has set a password on her ipod touch and we dont know what it is. i rang apple and due to being out of warranty they couldnt help unless i paid £25. if anyone knows a way around this could they please help as this ipod is a great support for my daughter and keeps her entertained for hours. thanks

    Connect to iTunes on the computer you usually Sync with and Restore...
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
    Mac OS X 10.6 Help: Reinstalling Mac OS X

  • My power button has stopped working - seems to have lost it's 'spring'. My phone is over a year old and out of warrenty - any options?

    My power button has stopped working - seems to have lost it's 'spring'. My phone is over a year old and out of warrenty - any options? It also seems to be going thru the battery in less than a day which was never the case. Are these two situations related?

    I don't know if they are related or not, but I'd take it in to an Apple store.  They might be gracious and offer to replace it, or at the least, it may be eligible for an out-of-warranty replacement at a reduced fee (currently $149.00 for the iPhone 4, 3Gs, 3G, and original - you get a refurb as replacement).

Maybe you are looking for

  • Excel crash with MSVBVM60 error

    Hi I have a problem with my input schedules, everytime I send data excel crash with an error in msvbvm60.dll. I have checked that the version of msvbvm60 is the newest one and it is. I havn't made any system changes in the past dayes and we have the

  • Wipe and factory restore without discs

    Hi can i do wipe and factory restore my MBA without the discs , i have them some where but no idea where

  • Cannot install Windows (XP, 2000 or 7) on Lenovo N200

    Hi there, I installed a new harddrive on my Lenovo N200 (0769-E8G). I tried to install basically all Windows OS (2000, XP and Windows 7), after 3 days I am giving up. Sooner or later there will always come an error message. I have tried to different

  • Aperture 3 and geotagging

    I have Aperature 3 and an AMOD AGL3080 GPS data logger. I'm able to import the geotag information into Aperature 3 and it shows a map trail of where I've been. What I can't figure out is how to sync my pictures to that data in that the pictures I too

  • Empty preview in browser

    Hello all, I have a page I'm building that uses an include file for the header and another for the main body. I'm using css to layout the main body. It look great in Dreamweaver, but whenever I "preview in browser" or upload it to the server, the por