Auto-generated objects are not generated - CP2 and CP1

Hi folks,
Almost nothing that is dependent on the Event Handler works.
When I "click" during recording, nothing is added to the new movie
except the capture of the background ... no matter the
recording mode used. When recording in Demo mode, text captions and
highlights should be auto-generated, but are not. And when
recording in either of the Assessment modes, clickboxes and other
interactivity that should be auto-generated are not.
Sudden onset - no prior trouble.
Both Captivate 1 and 2 are loaded and the problem exists with
both. Yet both were fine earlier (though I don't know when this
happened, I just know it was discovered on both at the same time
yesterday.)
Any help is greatly appreciated.

Hello toddfromheber,
I'm sorry to hear you are having these issues with your passwords. If you are having issues with iCloud Keychain not sharing or autofilling your generated passwords, you may find the troubleshooting steps outlined in the following article helpful:
Get help using iCloud Keychain - Apple Support
Sincerely,
- Brenden

Similar Messages

Test-OutlookConnectivity WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.

Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer   ServiceEndpoint                               Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx                 Autodiscover: Web service request. Success   46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!

hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId                  : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint             : autodiscover.domain.com
Id                          : Autodiscover
ClientAccessServer          : CAS01.domain.com
Scenario                    : Autodiscover: Web service request.
ScenarioDescription         :
PerformanceCounterName      :
Result                      : Success
Error                       :
UserName                    : Gazpromuk.intra\extest_645e41faa55f4
StartTime                   : 8/21/2013 4:08:50 PM
Latency                     : 00:00:00.1250048
EventType                   : Success
LatencyInMillisecondsString : 125.00
Identity                    :
IsValid                     : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867

Lines are not generated for holidays and sundays

Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
partha

Hi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi

Mails are not generated in background Jobs and not shown in SOST.

Dear All,
I have facing issue regarding to system mails. I want to send mails the various reports automatically from SAP System to different recipients. So I scheduled that reports at background and in their spool list recipient I have added distribution list.
But that mails are not generated, it is not shown in transaction SOST also. When I send mails manually it goes successfully to only our company domain recipients. But not other domains. How should I resolve this problem?
Please help me out.
Thanks in advance.
Amit

Hi Srihari,
I have checked the background jobs they showed it finished. Following logs are shown in job logs. Is problem is due to 3rd log??
18.03.2012 14:23:34 Job started    00           516          S
18.03.2012 14:23:34 Step 001 started (program RFITEMAP, variant PDC FARMAR, user ID DEVELOPER1)      00           550          S
18.03.2012 14:23:37 No items selected (see long text)                                              MSITEM         033          I
18.03.2012 14:23:42 Spool request (number 0000026302) created without immediate output               SY           355          S
18.03.2012 14:23:46 Job finished                                                                     00           517          S
When I saw further details of 3rd log it following message.
No items selected (see long text)
    Message no. MSITEM033
Diagnosis
    No line items meeting your selection criteria could
    be for the following reasons:
    1.) No corresponding items have been posted.
    2.) You are not authorized to display this data.
    3.) The items have already been archived.
Please help me out.
Thanks
Amit

Emails are not generated in CUP To approver, manager

Hi ALL,
I Configured one work flow in CUP. I did SMTP Server setting, EMAIL Remainder setting.
When I create new account request , CUP is provisioning access properly and automatic mail is going to that user. Mail is not coming to Approve r.
When I create other requests (change account etc) provisioning is done properly, but mails are not generated to user, approve r, manager .?
How can I fix this? Please suggest.
Thanks,
Joseph

Joseph,
There can be only 2 issues here:
1) SMTP server config is not correct or CUP is not able to reach SMTP server.
Ask Basis person to ping the SMTP server from CUP. If it works, then don't worry about 1).
2) Email reminder job is not running or emails are going to junk email
Check the log for email reminder job and make sure it is activated and running. check your junk mail folder.
Rgds,
Alpesh

Outbound Idocs are not generated for some material number MATNR

Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guys

Hi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
 GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
 REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
 REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
 REPLACE '&' WITH GS-COUNT INTO GS-TEXT.
 REPLACE '&' WITH GS-LINES INTO GS-TEXT.
 CONDENSE GS-TEXT.
 CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING
 TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
 EXPORTING
 MATNR = <MATNR_WERKS>-MATNR
 WERKS = <MATNR_WERKS>-WERKS
 MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
 GS-COMMIT = GS-COMMIT + 1.
 IF GS-COMMIT >= 100.
 GS-COMMIT = 0.
 COMMIT WORK.
 ENDIF

Date fields for info structure S032 are not generated

Hi Experts,
I am trying to update set up tables for '02' using OLI2BW. I excluded some plants from selection and executed the set up. But the job run for few mins and completed with the message "Date fields for info structure S032 are not generated".
I couldn't see any records in RSA3.
Please through some light on this issue.
Points reward for usefull help.
Please no wild guess.
Regards,
-N-

Did you find out why. I am getting same message.
Thanks
Shalini

Hp 15-r033tx speakers are not generating proper sound

Hp 15-r033tx speakers are not generating proper sound. as it should .I bought the system last week. please help.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP 15-r033tx Notebook and the speakers not working correctly. Here is a link to troubleshoot the speakers in Windows 7.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. Hope this helps. Thanks.

Objects did not generate successfully

Dear all,
while applying patch 8444110, i got error below and select Yes to continue.
Please advise what to do after finishing apply this patch. and where to find the cause of this error.
Thanks in advance.
Regards,
Error in path # 8444110
The following Oracle Forms objects did not generate successfully:
ap forms/US APXHOLDS.fmx
ap forms/US APXINWKB.fmx
ap forms/US APXIWALL.fmx
ap forms/US APXPAWKB.fmx
ap forms/US APXSUMDS.fmx
ap forms/US APXPWALL.fmx
ap forms/US APXPMTCH.fmx
ap forms/US APXSUMPS.fmx
An error occurred while generating Oracle Forms files.
Continue as if it were successful [No] : yes
Connecting to APPS......Connected successfully.

Hi,
Not all, just the forms which adpatch failed to generate. You need to select AP product, then select specific forms. When it prompts you to generate pll files in addition to forms, enter Yes.
You can find more details about adadmin and generating forms files in "Oracle Applications Maintenance Utilities" and "Oracle Applications Maintenance Procedures" guides.
11i (11.5.10.2+ virtual) Documentation Library
http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
Release 12.0.4 Documentation Library
http://download.oracle.com/docs/cd/B40089_09/current/html/docset.html
Note: 178722.1 - How to Generate a Specific Form Through AD utility ADADMIN
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=178722.1
Regards,
Hussein

Change pointers are not generated when creating a material master

Dear Experts,
Change pointers are not generated when creating a material master.
However, when a change is made to the already created material, the change pointers are created according the fields in BD52.
Am I missing any settings?
I need to create change pointers immediately when I create the material master in MM01.
Please suggest.
Regards,
Shetty

did you follow the steps given in
http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

Spawn jobs are not getting priority and target servergiven at selection scn

Hi Abapers,
I am scheduling main program as a job in backend through FMs JOB_OPEN, JOB_SUBMIT and JOB_CLOSE with priority and target server taken from user at selection screen through SE38,after executing the job,job will generate the spawn jobs (i.e child jobs). The spawn jobs also be scheduled with same priority and target server from taken user. But after completion of main job execution, the spawn jobs are not generating with same priority and target server taken from selection screen. May be its getting refreshed.
Please give me an idea how the spawn jobs also have to get the same priority and server of main job?
Please reply as soon as possible. I need it urgently.

Hi,
I have used below statements for ADD EXTRACT and ADD REPLICAT.
------Extract
ADD EXTRACT ext_1, TRANLOG, BEGIN NOW
-------Data Pump
ADD EXTRACT pump_1, EXTTRAILSOURCE /app/ggs/trail/local_trail_1/ta, BEGIN NOW
-------Replicat
ADD REPLICAT rep_1, EXTTRAIL /app/ggs/trail/remote_trail_1/tb, BEGIN NOW, CHECKPOINTTABLE ogg.tarun_chk
Yes, i have tried tutorial at Oracle Learning Library.
Thanks
Tarun
Edited by: user8886876 on Feb 12, 2012 9:56 PM

HR iViews are not getting displayed and showing "Page can not be found".

Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

Hi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely

Hi everybody !
I have a strange problem with SOAP deserialization in flex 3.2, and I thought this forum will be the best place to get answers ...
When I try to fetch some objects (like the ones shown below), the XMLDecoder does not deserialize all the properties.
In this case, it stops at the property named "rating". After it, all other data are lost.
I've used the flex builder debugger to locate the problem, and this lead me to the following method in the XMLDecoder class :
getApplicableValues(parent:*, valueElements:XMLList, name:QName,context:DecodingContext, maxOccurs:uint):XMLList:
State of the variables, before the "bug" :
The strange behavior appears after the five first properties had been deserialized correctly.
At this step : startIndex = 5, and the next property to unmarshall is "user" (according to the MExpertNotes object mapping)
the valueElement's list contains the following elements :
to simplify the notation, I will write only the position in the list and the xml tag name (see the complete soap response for more details at the end of this post)
(position, fieldName)
(0, ID) -> inherited from MotocycletteObjectImpl
(1,comment)
(2, noteValidation) (a Bean, never returned by our service -> set to null)
(3,noteValidationID)
(4,rating)
(5,timeOfCreation) -> inherited from MotocycletteObjectImpl
(6,user) (a Bean, never returned by our service -> set to null)
(7,userExpert) (a Bean, never returned by our service -> set to null)
(8,userExpertID)
(9,userID)
(10,version) -> inherited from MotocycletteObjectImpl
when it enters the for loop, at the first iteration the valueElements[i].name is equals to "timeOfCreation" and the name parameter is equal to "user".
so this test : if (name == null || valueElements[i].name() == name
|| ((name.uri == "" || name.uri == null)
&& name.localName == valueElements[i].name().localName))
returns false. The skipAhead variable is set to false (and i don't understand why). It stops iterating over the valueElementList, and so, skips all other properties.
Is this a bug ? Does a workaround exists ?
This affects many of our objects.
Any help would be greatly appreciated.
Best regards,
Jules Pajot
R&D engineer for Mikros Image
www.mikrosimage.fr
[EDIT] : My Message was too long, so I put the complete message here :
http://docs.google.com/View?docid=dd6j35ft_38grb9c7cr
PS : I apologize for my english wich is far from perfect :)
As a reminder , the XMLDecoder class method ( line 2204 ):

<div class=Section1> color:#1F497D'>The holidays are starting here. The experts in the area may already be away. Please file a bug. It might help if you can simplify your test case to use an XML file that is local so we don’t need your server connection.<o:p></o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Jules Pajot [mailto:[email protected]] Sent: Tuesday, December 23, 2008 9:05 AM To: [email protected] Subject: Re: Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely<o:p></o:p> </div> <o:p> </o:p> A new message was posted by Jules Pajot in Developers -- Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely Nobody has an idea about my problem ? <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b74f93/0">Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b74f93!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
I didn't notified any errors while registering our counter objects or while running Perfmon.exe
Note: Same counter objects are available and working fine with Windows Server 2008 R2.
for diagnostic our counters on WIN2012, ran command as follows:
cd c:\windows\sysWOW64
lodctr /Q
I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
Appreciate quiclk response with solution or clues to diagnose it more details.
Thanks & Regards,
Sudhakar Rudra

Hi,
Thanks for your reply.
I hope you understood our problem.
same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
and
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
Do you see any issues of registry entries. ?
On what basis perfomance monitor list few enabled counters?
How can we add our counters manually to perfomance monitor?

Auto-generated objects are not generated - CP2 and CP1

Similar Messages

Maybe you are looking for