Auto GI and GR customization

Dear all,
Kindly find below image
Here it is showing auto GI and GR,this can be done only by selecting the control key in master recipe or any other customization to be done?
Kindly let me know if any customization to be done for this.
Regards
Rajasekaran

Dear Raja,
you can set the backflush indicator(check box) for the components in the component assignment tab
page in the master recipe for each phase level and similarly you can do the same in the component
overview in the process order and so this will post the GI automatically.
Regards
Mangalraj.S

Similar Messages

I purchased an itrip Auto Pilot and require an app to use it according to my device I was setting up to play music in my car speakers. I cannot find an app for this in the itunes store. Help

I purchased an ITrip Auto Pilot and when attempting to use it to play music from my Iphone through my car speakers, I was promptedd to get an app from the itunes store to enable it to work. I went to the itunes store and searched for an app and could not find one. Can anyone tell me the app I need and where to get it for this itrip auto pilot made by Griffin? It is supposedd to enable my iphone and ipod to play on my FM radio in my car.

You should go to the web site for the iTrip product and see what app it is, I'll bet there's a link there that will take you right to the app. Don't worry, as you get more stuff it'll be easier to figure it all out, eventually it'll be plain old common sense that solves these types of issues for you

My itunes wont auto sync my iphone 4 after i connect it to itunes. But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day.

But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day and i was forced to use back a backup which i did in my old laptop 4 months ago. do i have to reinstall the itunes? will my backups be corrupted after i sync again? pls guide.
P.S/ its the latest version of the itunes whenever i did the backups.

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

GPO is set for "Auto download and notify for install" but it does not work correctly on two of my servers.

Hello,
I have a problem with two of my servers. I have ~200 servers which are updating fine through WSUS. The settings are as you can see "3 - Auto download and notify for install" in the GPO.
This is the correct setting. I want to achieve that I can install the updates whenever I want on these servers. On client computers there is a strict schedule with auto installs.
My GPO works fine for 98% of my servers. On two servers (a big file server and a TMG server) the settings are made as you can see in the screenshots, but the updates still get installed automatically.
I have no idea what I'm doing wrong here... It is a big problem for me that updates get installed automatically on these servers.
Although the Policy and the Registry both say 3 the server behaves like option 4 is active.
I would be very thankful for any input on how to find out what's the issue here.

and was not able to find any sign of an admin installing it in the WindowsUpdate.log.
Then the Windows Update Agent DID NOT install this update, and it's not really a WSUS issue.
My typical response to such a claim would be to ask you to show me in the WindowsUpdate.log where the update was installed... but it seems that request has already been answered.
The more relevant question it seems, is HOW DID these updates allegedly get installed?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

PSE 8: "Auto-analysis" and change of tag icon not working

Hi, in the organizer of PSE8/Win i have two problems:
I select some thumbnails and use "auto analyze" (for quality level etc.). Then i get a status bar "auto analyzing starts" - and it never gets beyond that stage. I have to click "cancel" to get out. That's also true with one single image selected.
The icons for tags like "Mary" automatically get a small picture. It is possible to change this tag picture after right-clicking. But then, the button "Edit symbol" is greyed out.
The menu for sorting by date in ascending/descending order doesn't change anything (i always see oldest pictures first).
There's lot of available hard disk in Elements' drive, but only 800 MB on the C: drive. I changed NONE of Elements preferences. When i change preference to "auto analyze on organizer's start-up", it still doesn't work. In the task manager, i do NOT see a task like "PhotoshopElementsAutoAnalyzer.exe" or so. I believe i saw this task in a slightly earlier version where everything worked fine. The problem exists with old catalogs as well as with newly created catalogs. Re-starts and re-booting didn't help either. I have perfectly normal camera JPEGS - and the face recognition works fine. It seems that the sub-application "PhotoshopElementsAutoAnalyzer.exe (?)" misses - could you advise me which file to look for?
Btw, i have Win XP SP2 with 4 GB memory on a non-English system with appropriate non-English PSE8 retail version. Premiere Elements 8 is installed too.
I would like to try "auto analyzing" and i would like to change tag icon pictures. Of course i could re-install, but that's just so tedious and i don't know if it helps. Would you have any other ideas? Thanks a lot!

Barbara, John,
thanks again for your considerations! After some more testing and input from the PrE 8 forum, i can say the following:
- Ascending/descending order: Now i know: If you have only pictures of one single day, there is no change in thumbnail order when you switch from "ascending" to "descending" and back. Of course pics from morning and evening should change position, but they don't. BUT: If you add one pic from another day, switching from "ascending" to "descending" suddenly fully works - including pics taken on one same day changing position. (To test Organizer, auto analysis and face recognition under fast clear conditions, i had originally only 20 pics in the catalog, all from one family day trip. And there, i couldn't change the order.)
- I checked "auto analyze" again. Now i can say: When i start "auto analyze" manually, i see "ElementsAutoAnalyzer.exe" for half a second in the task manager. Then it disappears, and on the Organizer screens, the status bar keeps claiming "Starting analysis" until i click "Cancel". I ONLY tried it on regular JPEGs so far. There is no way to get a "smart tag". If i try a second time, no more "ElementsAutoAnalyzer.exe" appears in the task manager. I also switched users on my PC to a user which has no utilities whatsoever running, less than 10 processes in the task manager, turned off anti-virus - still the same problem with "auto analyze".
- The face recognition tags btw are not written into the image file as IPTC, that has to be done with the "File" menu command. Also if i drag "smart tags" like "low quality" manually over a thumbnail, they get assigned only via catalog, not written as IPTC straight into the image file.
I don't think it's worth wasting more of one's time before there is a bugfix delivered that expressively acknowledges the issues mentioned. I am not a computer geek, just like to play with pictures and videos; i thought Elements was made for people like that.
Thanks again for your input!

My computer has been shutting off auto mystically and when I go to log in, the screen goes to lines and I can't turn it on

My computer has been shutting off auto mystically and when I go to log in, the screen goes to lines and I can't turn it on

Make sure that you haven't saved Uppercase and Lowercase versions of that name and password.
Remove saved Password(s):
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* [[Remembering passwords]]

How can I continuously auto-save and auto-name the JPEG files with a controlled time interval

Hi,
I am newly involved in some Labview projects that out of my knowledge. I am trying to save multiple JPEG images from a live imaging task to a folder in the computer hard disk every certain minutes. I'd like to name these files with the date and time (eg. Img_06012011_1635. jpg).Then, after hours long image capturing, I can have all the image files in a neat order.
My goal is to have the jpg files auto saved and auto-named with the data and time at that moment. I also need to control this waiting time between each savings.
Could you please show me some hints about this? See the vi attached, I know I need to do something on the "write path" part on the up right corner. Thanks!
Solved!
Go to Solution.
Attachments:
capture.vi ‏28 KB

Thanks, Steve. When I built up a path with the date and time info and send them to the WriteJPEG File.vi like you mentioned, it stopped saving any files into the folder. Do you think this is the problem from my while loop?Could you show me if there is any other secret functions that restrains the file saving?
I am planning to save the image files every 30 secs,for example, and then I can have a bunch of jpg files with their unique names after hours long image acquisition.
I appreciate you kindly help!
Attachments:
capture(updated).vi ‏29 KB

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?

Thank you, that was perfect!
Yoni

Appropriate component with auto complete and list of values

Hello,
I am using Jdev 11.1.1.6.0 with ADF BC and ADF Faces as technology stack.
I have a use-case and right now struggling to find the appropriate component/implementation for same. The requirement is:
1. User should be able to type and tab out to auto complete with perfect match.
2. Not all users are expert so they should be able search and select the items from list
3. Minimum key press should be there. E.g. auto complete should require only one tab press to complete and go to next field
inputComboboxListOfValues fits most of above except #3. One tab simply selects the item from list and second tab is needed to move out to next attribute. Is there a way to force one tab to auto-complete and move out to next attribute?
Tried simple inputBox with autoSuggest behavior but it lacks in opening of search and select feature that LOV component provides. Another drawback is that you need to wait for auto suggest list to appear and select before moving out to next attribute.
This is needed on a very highly frequent used screen, so no speed and key press compromise is expected. Most users are expert and they know the code, so just type and tab out is expected but at the same time if typo happens and code does not exist in valid list then pop-up should appear to search and select.
Is there a way to achieve this in ADF application (this is very well implemented in Oracle Forms application)?
Any help is highly appreciated.
Thanks,
Jai

Hi Frank,
I understand the single matching value and expecting move out in single tab for perfect match only. inputComboboxListOfValues selects the entry in one tab [even for single matching value] and user has to press another tab to go to next attribute.
Are you suggesting that it actually moves out to next field in single tab for "single matching value"?
Thanks,
Jai

Auto Save and Versions

Where can I control Auto Save and Versions? I can't find it in System Settings.
Can I control it by terminal commands?
On http://www.apple.com/macosx/what-is/ Apple claims:
Versions creates a new version of a document each time you open it and every hour while you’re working.
While here http://www.apple.com/macosx/whats-new/auto-save.html Apple claims:
Forget about manual saving and forge ahead with confidence. Auto Save in OS X Lion automatically saves your work, while you work, during pauses and every five minutes. And Lion saves changes in the background so you're never interrupted with progress bars.
So I wonder every five minutes or every hour? Would be nice to make sure on each Mac itself whether it auto-saves every five minutes or every hour and to actually allow its user o set the frequency.

It does both. It saves your work in the current version every 5 minutes. Every hour, it creates a new version of the document.
I haven't searched for any version settings, yet.

My address bar keep auto hiding and I cannot figure out how to stop it and keep it there, what do I do to stop this?

I have to put my pointer to the top of the firefox page for my address bar to come down for me to type in an address. It auto hides and I want that disabled. How do I do this and fix this problem?

Are you in full screen mode? Press F11 and see if that fixes it.

Change Color in Messages and General Customization (Pixi Plus Verizon)

Hi everyone, I just got the Palm Pixi Plus and I'm still figuring everything out, so I hope this isn't a silly question. Is there a way to change the background color of each contact in Messaging? My outgoing messages are always green and incoming messages are always displayed in blue - is there a way to assign a color to a contact or message thread?
It also seems that in general, the display of the phone does not seem very customizable - is this true or have I just not figured it out? For instance, changing colors/font sizes in menu, adding a larger clock to the Launcher screen, etc, options that are pretty standard on all cell phones. Is changing the wallpaper really the only way to customize the display?
Thanks a lot!

Hello kbend and welcome to the forums;
By default, wallpaper and sound customizations are the extent of changes you can make. However, as was noted in the official Palm blog http://blog.palm.com/palm/2010/03/makeover-madness.html the homebrew community has the ability to "theme" your device, changing nearly every aspect of the user interface.
Please be aware however, adding homebrew applications or patches is not supported by Palm, and we would be unable to troubleshoot anything related to these features.
Hope this helps,
TreoAide

Stop JPanel auto positioning and resizing in Netbeans

Hi,
I'm working on a Swing application in Netbeans. In my program I had several JPanels. At any one time, only one JPanel is visible.
I dragged my JPanels to the JFrame in the Swing editor. Each time the user clicks on the switch function button, another JPanel should be displayed.
However, the new panel does not display correctly. It remained at the position where I had dragged (randomly) on Netbeans, instead of the new size and location I set it to prior to setting it visible. I tried to tinker with it, and realized that Netbeans helped me reposition my JPanel back to its original position. For my function to work, I suspect I should disable auto positioning and resizing.
How do I turn it off?
Thanks in advance,
eddy05

eddy05 wrote:
That's what the JComponent.setSize() and JComponent.setLocation() do right, to resize and relocate JComponents and its subclasses.This only sets the properties of that particular JComponent. The layout manager of the container that holds it can choose to use these properties or not depending on what layout manager is being used.
I wanted to perform the above functions, but Netbeans' behaviour keeps interfering, hence my request on how the behaviour can be turned off =)By dropping a JPanel into your JFrame (the JFrame's contentPane actually), NetBeans is by default going to use the GroupLayout, and the properties of the JComponent noted above will be ignored. One solution alluded to above is to have the JFrame's contentPane use a null layout, but while this might work in the short run, in the long run it will hurt you. Better is to read up on the various layout managers available for your use in the Sun Swing tutorials and start to play with them in your code.

N72 Auto Cam and applications Start/Stop Problme

Hi
I got a problem with my N72, i cant understand what happened please help me to resolve it.
Its Cam auto starting and stopping and other installed software applications as well with gap of short period of time. its not only disturbing me but also consuming battery rapidly

Drag Garage Band to the trash.
Go to: System Preferences > Account > Log In Items
Use the +/- signs to add/delete programs started at log in.
Joe

Since IOS 6 update, malfunction with auto rotate and sounds

Hello. I'm wondering if others have experienced a problem since updating their IPads. Since the update, I've lost the dual functionality of auto-rotate and sounds. I can only have 1 of the functions operate as per norm. If I want sounds (for keyboard clicks/games/etc.) my screen will not auto orient. Vice versa for auto orientation. Normal rotation is only possible with NO SOUND for the previously mentioned apps. I've performed reboots, and also endeavoured to make the obvious corrections in the General Settings fields. When I uncheck "MUTE"...it automatically places a checkmark in the lock rotation field!!!
Can anyone offer a solution, to what i perceive, as a software issue?

Maybe this will help.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Auto GI and GR customization

Similar Messages

Maybe you are looking for