Auto GR with Control Key or Prod.Scheduling Profile

Hi PP champs
As we can use both i.e. Control key and Production scheduling profile for activating the Auhto GR for prodcution order confirmation ..Can some one help me which is the more <b>preferred</b> or  which is considered first by the system if we have both in <b>material master and routings respectively</b>.
I have gone thru the documentation but couldn't get clearity as in both its mentioned as if its not activated in scheduling profile control key will take over and same thing for control key that if its not mentioned in control key system will check for production scheduling profile...
BR
Sumit

Sumit,
Generally Production scheduling profile is the prefered option, as most of the clients also prefer using to control certain auotmation at the time of order creation and release.
To me i dont see a big difference between using control key or scheduling profile to define auto GR.
As far as priority is concerned Control key is first checked by the system, if not available checks for scheduling profile.
Regards,
Prasobh

Similar Messages

  • Multiple selection with control key in ring, enum, or radio buttons on Speedy-33 ?

    Hi all,
    I want to create a list of entries via ring, enum, or radio buttons. I just want the user to be able to select more than one entry from the list.. This is normally doable with windows applications by using control key. However, how could I do the same thing or let the user choose more than one entry from the list? Any idea is greatly appreciated..
    Thanks so much!

    Hi Casiopea -
    To answer your question, I'm not sure I've ever actually seen a ring, enum, or radio button control exhibit the "CTRL+click" behavior you're describing.  (In fact, I think all of those user interface elements are designed specifically so that only one value can be selected at any one time.)
    However, I have seen plenty of list boxes allow multiple selection, and LabVIEW's list boxes can do the same.  A group of checkboxes can also end up looking like radio buttons if you group them with some "decoration" and would allow you to select multiple options (because you can check/uncheck each box independently).
    I'm not quite sure, though, how your question relates to LEGO specifically.  Did you accidentally post this question to the wrong discussion forum?
    To address Eagles Coach's statements, the official Move block uses checkboxes in the "Port" section of the configuration pane in the MINDSTORMS software, not radio buttons.  The Motor block uses mostly radio buttons, and I didn't see any sections that allow multiple selections.
    James Blair
    NI R&D

  • Confirmation Control key not allowed in MM Scheduling Agreement item.

    Hi Experts ,
      I am facing an issue with Confirmation control key in MM Scheduling Agreement.
    Scheduling agreement already GRd without Conf-key and Now if am going to update confirmation control key as 0001.
    I am getting an error "Confrmation Control key is not allowed".How can I solve this problem.Anyway i have to update the conf-key.
    If you are answering me that will be very much apreciatable.
    Looking forward for your answers.
    Thanks,
    Bala

    Hi Bala ,
    We can directly update the database table field , but this is not recommended.
    Can you re-do the GR i.e Cancle the existing and again do GR with confirmation control key.

  • How to use Control Key with other key as Ctrl+C

    I am using this code to access Shift key + C
    addKeyListener(new KeyAdapter()
    public void keyPressed(KeyEvent KEv)
    if(KEv.isShiftDown() && (KEv.getKeyCode() == KEv.VK_C))
    //Shift + C key down
    Please tell me how to do with Control Key?
    Vishwajeet

    addKeyListener(new KeyAdapter()
    public void keyPressed(KeyEvent KEv)
    if(KEv.isControlDown && (KEv.getKeyCode() == KEv.VK_C))
    //Cntrl + C key down
    //if u want to create a key stroke for keys with contrl combination use CTRL_MASK.

  • Control key PM02 and PM03

    Hi Gurus,
    I am littele bit confused with PM02 external operation from PM03.
    By both control key i got PR but by PM03 PR ML81n happened,but PM02 PR neither MIGO/ML81N happened.
    Then what is use of PM02 PR?? and in SPRO PM02 control key is having  schedule ext operation and PM03 having service field..
    what is feature of this field???Pls explain....

    HI,
    If you create an operation using control key PM02 a normal goods receipt of the resulting PO will act as the confirmation of the operation, a PM03 requires the creation or selection of a Service Package, this then requires a service entry sheet to
    confirm the delivery, tx ML81N.
    If you use a PM02 control key the system will create a free-text PR using the data that you entered.
    The process flow is then PR->PO->GR->IR
    With a PM03 control key you will see a new Servicessub-tab at operation level. Here you can enter multiple services of different UoM.
    The process flow is then PR->PO->SES->IR
    For more info/scenario please visit site http://www.sap-img.com/plant/difference-between-the-control-keys-pm02-pm03.htm
    Hope the above info clears your doubt.
    Thanks.

  • Image of the Escape and Control key.

    Hey,
    I couldnt find anywhere better to put this :P.
    I recorded a video on 10.5.7 and it shows the ^ key for control, and the escape icon for when I pushed the ESC key.
    Does anyone know where I can find images like this.
    But with Control key and Esc?

    http://www.mrmont.com/teachers/Stencils/MacModifierKeys.png
    or maybe this is good enough

  • How to create inbound delivery for items with no confirmation control key.

    hi Please help me with this..
    are there any user exits to create an inbound delivery for scheduling agreement items with no confirmation control key.
    my req is
    i have 12 items (me33 transaction) of them three have confirmation control key populated and out of those three 2 will be deleted so only one item is left for inbound delivery creation, but i need to have all this possible for all items with or without confirmation control key.
    thank you

    hi
    for inbound delivery there is BAdi called LE_SHP_DELIVERY_PROC... in there is method called ITEM_DELETION... in this u can flag the item to delete or not..
    this will be triggered for inbound as well as oubound delivery..
    you can check confirmation status for the PO in the table EKES... in this table there is filed called EBTYP.. using this field u can check the PO item confirmation status..
    I hope above information is helpuful for u

  • I am using Photoshop CS5 on a new iMac with a wireless keyboard.  I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

    I am using Photoshop CS5 on a new iMac with a wireless keyboard.  I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

    Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

  • Control key is set for u2018Process manufacturing with Inspectionu2019

    Hi,
    Which control key is set for u2018Process manufacturing with Inspectionu2019?
    What is the meaning of FS Relationship

    Hi,
    Control Key for "Process manufacturing with Inspection" is PI02.
    It is meant for Manufacturing is with Process Order with Quality inspection.
    Further this Control key you need to set in CR01/CR02 -Default Values-> Operation Default Values----> Control Key
    Regards,
    Tejas
    Edited by: Tejas  Kantilal Pujara on May 21, 2008 8:54 AM

  • Scheduling Agreement confirmation control key

    Hi
    How to maintain the vendor confirmation for the scheduling agreement.
    What is the steps involved.
    thanks
    MM

    Hi,
    First go to change the SA, trs ME32, double-click on the item and assign the conf. control key that suits your needs. Save.
    Then go to maintain the delivery schedule, trs ME38, mark the item and choose in the menu "Item -> Confirmations -> Overview".
    BR
    Raf

  • "Inbound deliveries for PO reciepts with confirmation control keys"

    Hi Gurus,
    Can somebody tell me the detailed configuaration steps " Inbound deliveries for PO reciepts with confirmation control keys".
    Thanks
    Raj

    Hi,
    Del. type is identified in
    OLME-Confirmations-Define Internal Confirmation Categories
    Del. item catogery is defined in TCode 0184.
    Based on Del. type & item cat. grp in Material master
    Goods Recieving point (shipping point) against Plant & SLOC is defined in
    Logistics Execution-Shipping-Basic Shipping Functions-Shipping Point and Goods Receiving Point Determination-Assign Goods Receiving Points for Inbound Deliveries

  • Update PO with Confirmation Control Key,Acknowledged Delivery Date.

    Hi Experts,
    I have a requirement that through a Excel file I have to update a Existing PO with the three fields,
    1.Confirmation Control Key
    2.Acknowledged Delivery Date.
    3.Acknowledged Modified Delivery Date.
    If there will be differ in values in any of the field in the existing PO and the incoming excel file then we need to update the
    fields in the PO.
    So is there any BAPI or FM to update the field value?
    I tried with BAPI_PO_CHANGE it is not working.
    In excel we have only five fields.
    1.PO number
    2.Item
    3.Confirmation Control Key
    4.Acknowledged Delivery Date.
    5.Acknowledged Modified Delivery Date
    Please help.
    Regards,
    Umesh

    you can use BAPI_PO_CHANGE itself, but you need to get the details of the current PO before passing the details to BAPI_PO_CHANGE
    you can use BAPI_PO_GETDETAIL1 by passing ( PURCHASEORDER = <..Your Purchase order Number..> ) and after that you willl
    get all the details of the PO, just change the required data's and pass it to the BAPI_PO_CHANGE. It will be easier.
    after you receive all the data,
    pass the corresponding data from BAPI_PO_GETDETAIL1
    to BAPI_PO_CHANGE.
    1.PO number                    -     PURCHASEORDER (importing)
    2.Item                         -     POITEM (Tables )
    3.Confirmation Control Key          -     POCONFIRMATION (Tables)     
    4.Acknowledged Delivery Date.               
    5.Acknowledged Modified Delivery Date
    I think for 4,5 fields are also in POCONFIRMATION table itself (not sure)

  • New keepassx (0.4.0-1) global auto-type key not working with Win-key?

    After system upgrade in new version of keepassx (0.4.0-1) stop working global auto-type key set previously to Win+K stop working. I tried to set it once more  (menu Edit->Settings->Advanced) but combinations with Win key are not recognised anymore. I am just curious if anybody have same problem. Anyway, I happily downgraded back to keepassx 0.3.4-1 .

    I found it at http://archlinux.alouche.net, got there from Downgrade packages. Direct links: i686, amd64.

  • Keyboard problem with T410 - Control Key

    I have a problem with the control keys on the keyboard of T410.
    I swapped my X200 keyboard over to T410 to check if it is software or hardware issues.  With the X200 keyboard, the 'Ctrl' key is not working.  With the T410 keyboard, 'e', 'd', 'c' and 'Ctrl' keys are not working.

    Welcome to the forum!
    I believe that X200 and T410 keyboards are mapped differently in BIOS.
    Can you find another T410/T510 keyboard to test with?
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • GR  via MIGO allowed for POs with conf control key

    GR  via MIGO allowed for POs with conf control key.
    where GRs should be allowed only based on ASN (INB) Del.
    How to restrict GR via MIGO when confirmation control key is set?

    ideally it should work, however check Conformation Control Key LA.
    Confirmation sequence " GR relevant " and GR assignemnt is checked or not, in SPRO > MM> Purchasing --> Confirmations --> Set up confirmation control.

Maybe you are looking for