Auto Import - Is only ONE watch folder allowed across several catalogs?

I am looking to confrim that Lightroom v4.4 only allows for one watch folder to be set up under File>Auto Import and therefore I cannot set up a differnet watch folder for each of my multiple catalogs.
I represent several artists and need to manage their image database separately and thought I would be able to auto import from a folder they drop images to; But now I realize Lightroom may only allow one watch folder overall because when I open a catalog I notice the watch folder is set to what I selected when the previous catalog was being used.
Is their a way to have each catalog watching a folder unique to it or is only one watch folder possible?
Thanks in advance for the answer and any solutions.

Yes - watched folder is handled as Lightroom preference, not catalog preference...
For greater flexibility you'll need a plugin. Consider:
* jf Folder Watch
* rc Ottomanic Importer
Rob

Similar Messages

What is the importance of Only One Business Partner Allowed

Hi all,
We know that the Relation between BP and Contract account is :
1 BP : n CA.
If the above relation is true, I would like to know the importance of the configuration "Only One Business Partner Allowed" in the below path:
Financial Accounting(New) >>Contract Acounts and Recievables>>Basic Functions >>Contract Accounts >>Field Modifications>>Configure Field Attributes for Contract Account Category.
If we don't check the field for "Only One Business Partner Allowed" , Does it contradict to the 1BP : n CA relation ?
Regards,
Sai
Edited by: kantesai on Aug 10, 2011 10:35 PM

n BP : n CA relation is possible.
One BP must be account holder from all BPs of CA. Rest of BPs can be Alternate Account, Spouse etc.
Please check table FKKVKP from technical perspective, as both BP and CA are primary key. If it was 1 BP : n CA then there would have only VKONT been as primary key.
Thanks,
Murtuza

HT5824 Can I use only one (selected) folder from my documents in iCloud?

Can I use only one (selected) folder from my documents in iCloud for MAC and PC?

If the folders were created in the Photos app on the iPad, they don't really contain copies of the photos. They contain pointers to those photos that allow them to appear in the albums that you create. Consequently, they cannot be imported to the computer. Those albums are for local organization on the iPad only And cannot be imported.
You should be able to select the indicidual phots that you want to import, as far as I know. I can do it on a Mac using iPhoto or Image Capture, so I assume that Windows will allow you to pick and choose which photos you want to import.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Possible to encrypt only ONE email folder?

I would really love some help with this; I've been banging my head against the wall trying to achieve something that is seemingly so simple and basic.
We want to use an Email app that will allow us to encrypt only ONE email folder. Access to the rest of the email should be open to all users of the computer, just the one folder needs to be encrypted or password protected. Apparently this is not possible in Outlook, because in Outlook for Mac all of the folders are now integrated into one database and so cannot be encrypted individually as they can on PC.
Does anyone have any suggestions of how to achieve this? I am considering using Mac's Mail, but can't find Mail file structure on my Lion machine to see if I can access the individual mailboxes separately. Does anyone know where to find Mail's folder structure? I looked in the Library but found nothing for Mail, as it used to be in previous OSs.
Am open to third party software work arounds, other email clients, whatever. I would really appreciate any suggestions!

Does anyone know where to find Mail's folder structure? I looked in the Library but found nothing for Mail, as it used to be in previous OSs.
It's located in your user Library folder which is now normally hidden in Lion.
In the Finder hold down the option key to reveal the Library folder and select Go>Library>Mail and you find the Mail files.
Matt

Use Time Machine on ONLY one specific folder?

I wish to use the Time Machine function to backup only one specific folder on my computer, the DROPBOX folder.
How can I implement this and inform Time Machine of my choice?
According to my first investigations, I only have the choice to select folders to EXCLUDE. This makes the setup of Time Machine unconfortable.
Any advice?

I agree with Jeffrey Jones2 above .
Makes no sense to backup the dropbox folder alone, Dropbox It is "cloud storage" and has its own backup. Dropbox keeps a snapshot every time you save a file. You can preview and restore.
If you go to the DROPBOX website you can view deleted file from the trash can icon (see below.)
From there it is a matter of Restore the file. This would work for accidentally deleted files, there maybe a 30day archive limit so read the small print for details.
If it is imperative to your backup plan, just drag and drop your folder to any external storage device, just not the Time Machine HD/partition.

When defining copy rules, only one source field allowed

Our users have requested the facility to allow them to copy pricing condition records when in in VK12 transaction. But when configuring the copy rules, we have come across the following problem:
When configuring copying rules for copying pricing condition records,
there is no possibility to use more than one source/target fields.
In our example, the condition table created for a certain pricing
access sequence contains keys such as Sales Organization, Sold-to Party
"and" Product Hierarchies level 1 to level 9 (e.g. PH1 - PH9) .
In the condition table definition, fields PH1 to PH9, although key
fields, are also defined as footer fields. This means that per sales
organization and sold-to party, we can create more than one condition
record based on different combinations of PH1 to PH9.
However when setting up copy rules for conditions in SPRO (SD -
Pricing Control - Copy Control for Conditions) to allow our users to copy the condition records, for a given Source /
Target table, the standard selection screen only allows us to define one Source / Target field.
In our case, this is not helpful. The configurator should be allowed
to select more than one source field (i.e. PH1 and PH2 and ..... PH9). At this moment,
we can only select as source field PH1 or PH2 or PH3., etc..
Steps for the Reconstruction:
- Run Spro.
- Select SD --> Pricing --> Pricing control --> Copy control for conditions -- > Copying rule for conditions
- Select 'New Entries'. Selection screen is displayed. The issue is that in this selection screen, the configurator is allowed to select only one source field. He should be allowed to select multiple fields.
Can you help us with this problem please?
Your help is much appreciated!
Edited by: C. Hassink on Feb 2, 2008 3:50 PM
Edited by: C. Hassink on Feb 2, 2008 3:52 PM
Edited by: C. Hassink on Feb 2, 2008 3:53 PM
Edited by: C. Hassink on Feb 2, 2008 3:55 PM
Edited by: C. Hassink on Feb 2, 2008 3:56 PM

Hi Ralph,
I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
What do you think of the following idea to solve the issue a totally different way:
All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
Regards
Robert

OIA jobs.xml constrain execute of file import on only one of two app server

I am trying to get the jobs.xml and scheduling-context.xml files to fire an import job on one of the two app servers. There are two application servers utilizing the same shared database. Files to import into OIA reside on one of the two application servers file systems only and we want to use the jobs.xml and scheduling-context.xml files on one of the app servers to setup the imports.
I have these two beans enabled
<ref bean="usersImportJob"/>
<ref bean="usersImportTrigger"/>
This is a snippet from the jobs.xml file
<bean id="usersImportTrigger" class="org.springframework.scheduling.quartz.CronTriggerBean">
<property name="jobDetail">
<ref bean="usersImportJob"/>
</property>
<property name="cronExpression">
<value>0 0/5 * * * ?</value>
</property>
</bean>
<bean id="usersImportJob" class="org.springframework.scheduling.quartz.JobDetailBean">
<property name="name">
<value>Users Import</value>
</property>
<property name="description">
<value>Users import Job</value>
</property>
<property name="jobClass">
<value>com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.IAMJob</value>
</property>
<property name="group">
<value>SYSTEM</value>
</property>
<property name="durability">
<value>true</value>
</property>
<property name="jobDataAsMap">
<map>

<entry key="jobOwnerName">
<value>REPLACE_ME</value>
</entry>

<entry key="usersToNotify">
<value>REPLACE_ME</value>
</entry>
<entry key="IAMActionName">
<value>ACTION_IMPORT_USERS</value>
</entry>
<entry key="IAMServerName">
<value>FILE_SERVER</value>
</entry>

<entry key="NEXT_JOB">
<value>rolesImportJob</value>
</entry>
</map>
</property>
</bean>
QUESTION:_
Is the IAMServerName value suppose to have the literal hostname of the application server (ex. "oia.bluebird.com") configured in place of the default "FILE_SERVER" text?
Your insite is greatly appreciated

Hi Meg,
I have to say that I've only seen the jobs.xml be defined for data feeds only. It does not make calls out to app/DB servers OOTB.
The alternative solution are the following:
1. Use your IDM provisioning connector to the application then pull the data from the IDM product into OIA
2. Extract the data from the app server using the ETL functionality/engine within the OIA product to extract the data into a data feed (then OIA will pick that up)
3. Construct some extracting functionality (like a java class) instead of ETL
Hope this has helped
Regards,
Daniel Redfern
Technicalconfessions.com

Video imported as only one clip on iMovie 08

I imported video from a Canon Elura 100 that consisted of many clips(100+) that showed up as only one long clip. I found info that suggested that it could be that the camera's date and time wasn't set. I tried another DV tape (camera's date & time is set) with the same result. Any suggestions on what went wrong and is there an easy way to separate into clips?

I imported video from a Canon Elura 100 that consisted of many clips(100+) that showed up as only one long clip.
Strange how you complain about getting a single file while others are complaining that their content is broken into dozens if not hundreds of segments.
Any suggestions on what went wrong and is there an easy way to separate into clips?
Have no idea why you have been so "blessed" or "cursed" (depending on you point of view) but see no real difference in editing other than an individual's personal point of view when it comes to managing the content as source material. iMovie will handle the content equally well whether the project resource pointers point to various segments of a single long file or to separate segments in separate files. If you have to physically separate your files, you can always trim and segment the raw files any way you want to dispose of the dross you will never need or use. I would not, however, recommend using a physical/file destructive work flow within iMovie '08 as it is a bad habit to get into if you ever work with anamorphic source material (i.e., you can lose your flag and iMovie with thereafter treat your files as 4:3 content).

Only one bean is allowed!!!! but how???

hi@all
i got a little problem, in my program, i want only ONE instance of backing bean to be generated, how to realize that?
I dont think this is a big and hard question, so give me some hints, i will really really appreciate it !!!
waiting, waiting, Zzzzzzzzzzzzzzzzzzzzz
db

thanks for ur reply.
actually i have already set the bean's scope to session, but there are still two different instances of my backing bean.
Just now i found the reason. I have two JSP pages, one is login page, the other is show table page. In login page i use show a property of the so called "globalbean", so i think at that time the first instance of "globalbean" is generated. and then, inside show page page, i use jsp script to generate a new instance of "globalbean" in order to use a method of "globalbean", therefore there exist two instances of "globalbean".
And one of them has incomplete initialization, so in phase 6, the properties returned to the show table page is not right.
How to solve it? thanks in advance!

Only one internal order allowed for Cost center/GL combination -validation

Dear Friends,
We are using internal orders for controlling department wise budgets.
my client wants that he be able to post only through one GL account to one internal order
that is for Marketing dept,(departments are created as cost centers)
Canteen exp              internal order 1000
Entertainment exp     internal order 1001
Gift exp                     Internal order 1002
that is when GL account canteen exp is used (for cost center 1000 (marketing)) then internal order 1000 can be used but if entertainment exp is to be booked internal order 1000 cannot be used. in this case only internal order 1001 should be allowed
We are using real internal order (settlement will happen at end of month)
Can you let me know if this is possible in standard SAP or any workaround.
Regards,

Hi Sangharsh,
If internal order must be filled in these GL then you can meet your requirement by creating the validation. To meet this requirement three steps are to be created in one validation. One step is created below to make you create two more steps by your self.
Create validation under Financial Accounting Line Item using transaction GGB0.
Step 1.
Prerequisites. (Go to settings>Expert mode and fill following)
BSEG-BUKRS = '1000' AND (here instead of 1000 you enter your company code)
BSEG-HKONT = '450000'      (here instead of 450000 you enter GL for canteen expense)
Check
BSEG-AUFNR = '1000'
Message
Click on pencil icon and create below message or the message you want.
Intenal Order 1000 is allowed for canteen expenses.
Assign this validation to your company code using transaction OB28 with call up point 2.
Similarly you can create two more steps. Thus your requirement can be met.
Regards,
Chintan Joshi.

Importing photos; only one appears

I saved numerous photos from Iphoto to C.D to save space on my computer.
I tried to re-import photos from Brazil to Iphoto. It seemed to work .
However, when I open I photo, I only find the first photo of the group of 45.
I want to use all 45.
any ideas?

OK. It clearly shows that 54 slides were imported. They become a group, last imported.
Then, when I make this a slide show; it becomes a slide show of one slide.
There must be a setting somewhere.
I have several slide shows in my iphoto and they work well.
Thanks for the help.

Can't import folders only one at a time files. (thousands!)

OK here's the problem: I just reinstalled XP on my computer and when I either add by file or by folder it doesn't show in my library. I have 7,000 songs and I see that that when i dip threw the folders and catch an individual file it will add, but i would quite literally have to do that thousands of times for that to work. Before I wiped my computer clean I just copied my itunes library to an old hard-drive. So its organized the way itunes does it with countless folders if it was just one folder with all those files it would be easy, Ive been researching for hours now and yeah i should of burn it via export library but to little to late for me now. Ugh I just organized my library too! Album art and all! Guess it was naive to think it was as simple as putting it in my itunes folder and abra-cadabra! it be there. Please help and I'll be your best freind.

Ever since the macmail app, changed it's appearence etc.
What are you talking about? Mail hasn’t changed its appearance since Mac OS X 10.4 (Tiger) was released.
If you’re not using Mac OS X’s Mail, but .Mac mail on the web instead, you’re posting in the wrong forum. The right forum for such questions would be .Mac Email On The Web. This forum is for discussing issues related to the Mail & Address Book applications included with Mac OS X 10.4 (Tiger).

Is only ONE .jar file allowed in resources tag?

I can run my web launch program when use the jnlp file configured this way:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp spec="1.0+" codebase="http://www.u.arizona.edu/~michaelo/" href="launch.jnlp">
<information>
<title>JFlashCalc Pharmacologic Calculations Program</title>
<vendor>OSSIPOV</vendor>
<homepage href="http://www.u.arizona.edu/~michaelo"/>
<description>jflashcalc</description>
<description kind="short">Pharmacologic Calculations with JFlashCalc</description>
</information>
<resources>
<j2se version="1.4+"/>
<jar href="main-app/jflashcalc.jar"/>
</resources>
<application-desc main-class="jflashcalc.JFlashTable">
</application-desc>
</jnlp>
But, in order to be able to use the FreeHep VectorGraphics classes, I reconfigured the .jnlp file like this (emulating their own ExportDemo.jnlp, which works fine)
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp spec="1.0+" codebase="http://www.u.arizona.edu/~michaelo/" href="launch.jnlp">
<information>
<title>JFlashCalc Pharmacologic Calculations Program</title>
<vendor>OSSIPOV</vendor>
<homepage href="http://www.u.arizona.edu/~michaelo"/>
<description>jflashcalc</description>
<description kind="short">Pharmacologic Calculations with JFlashCalc</description>
</information>
<resources>
<j2se version="1.4+"/>
<jar href="main-app/jflashcalc.jar"/>
<jar href="lib/freehep-export.jar"/>
<jar href="lib/freehep-graphics2d.jar"/>
<jar href="lib/freehep-graphicsio.jar"/>
<jar href="lib/FreeVG.jar"/>
<jar href="lib/freehep-io.jar"/>
<jar href="lib/freehep-swing.jar"/>
<jar href="lib/freehep-util.jar"/>
<jar href="lib/freehep-xml-2.0.1.jar"/>
<jar href="lib/jas-plotter-2.0.jar"/>
<jar href="lib/jdom-1.0.jar"/>
<jar href="lib/junit-3.8.2.jar"/>
<jar href="lib/openide-lookup.jar"/>
</resources>
<application-desc main-class="jflashcalc.JFlashTable">
</application-desc>
</jnlp>
Now, I get this error message, which is consistent with unsigned jar files. I signed ALL the jar files used, so what can be happening here?
Exception in thread "AWT-EventQueue-0" java.security.AccessControlException: access denied (java.awt.AWTPermission setWindowAlwaysOnTop)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.awt.Window.setAlwaysOnTop(Unknown Source)
     at jflashcalc.JFlashTable.<init>(JFlashTable.java:486)
     at jflashcalc.JFlashTable$1.run(JFlashTable.java:72)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
If I remove these lines from .jnlp, all works fine again, except I can't do the file export:
<jar href="lib/freehep-export.jar"/>
<jar href="lib/freehep-graphics2d.jar"/>
<jar href="lib/freehep-graphicsio.jar"/>
<jar href="lib/FreeVG.jar"/>
<jar href="lib/freehep-io.jar"/>
<jar href="lib/freehep-swing.jar"/>
<jar href="lib/freehep-util.jar"/>
<jar href="lib/freehep-xml-2.0.1.jar"/>
<jar href="lib/jas-plotter-2.0.jar"/>
<jar href="lib/jdom-1.0.jar"/>
<jar href="lib/junit-3.8.2.jar"/>
<jar href="lib/openide-lookup.jar"/>

In order to get all-permissions, you need to add the security element in the jnlp file:
<security>
<all-permissions/>
</security>
otherwise, javaws will not try to validate the jar(s) certificates and grant the required permissions.

Keeping only one row with information from several rows?

Hi,
I have a table with companies. The companies appearing more then once in the table, with different information in different columns. How do I keep one row from each company with all information..?
Example:
Company State City Country
CompA WA Seattle null
CompA null null USA
CompB null null USA
CompB TX null null
...and so on.
And I want out of this:
CompA WA Seattle USA
CompB TX null USA
Any tips?

declare @temp table
company char(6),
state char(10),
city char(20),
country char(10))
insert into @temp values ('CompA','WA','Seattle',null),('CompA',null,null,'USA')
,('CompB','Tx',null,null),('CompB',null,null,'USA')
select max(company),MAX(state),MAX(city),MAX(country) from @temp
group by company
--Prashanth

Include mask overlay with Auto Import preset.

It would be nice to automatically show an overlay mask in the picture as you Auto Import it via the Watched folder.
Most of the digital back software have this mask overlay posssibility.
All it does is it obscures the area you don't want to see (a bit like the crop tool, with adjustable black opacities, but without actually cropping the image).
The reasoning behind this is that you often need to take pictures with plenty of surrounding space in your layout, for instance, blank space to the right of left of the image for putting text, or to allow for multiple output formats, but at the time of viewing, you just want to concentrate on the masked area, free from distractions.
Art directors are always asking for this: "What would it look like when it's cropped?" You can go to the crop tool and show them, but it would be better and quicker to have an auto import overlay mask which you can flick on and off.
Edward

Sounds like another use for TPI's. Transparent PNG Images (Id Plates) that only have limited use and one at a time, now. Currently only usable in Slideshow and Print.
See TPI's at Downloads
Lightroom Extra. We have been asking for expanded use of TPI's (which can be used for Framing and Watermarking) in Export and Web and now you have presented one more potential use bringing the need for there expanded capabilities even more to the fore.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Auto Import - Is only ONE watch folder allowed across several catalogs?

Similar Messages

Maybe you are looking for