Auto Inspection lot generation

Dear All Experts,
I have created new inspection type as Z01 by copying the 01 and I have maintain Inspection Lot Origins and Assign Inspection Types under 01. After that I have assigned my new inspection type Z01 to material master and activated it with material post to quality. Up to this it is working fine but after GRN system is not creating the lot. Even thou material is posting to the quality stock but no lot is in QA32.
But if I Create the lot wih QA01 it working fine and I'm able to do the UD also. But for no automatic lot generated for purchase order.
Please provide the details how to resolve this issue?
Thanks and Regards,
Manish
Edited by: manish gurnule on Feb 17, 2009 5:39 AM

Dear,
Yes it is there and I have copied insp type 01 to Z01. and material master setting are also there.
Please help.
Any others inputs
Regards,
Manish
Edited by: manish gurnule on Feb 17, 2009 7:26 AM
Edited by: manish gurnule on Feb 17, 2009 8:21 AM

Similar Messages

Inspection type 03 - PP/PI not creating auto inspection lot

Hello Experts,
I've read the Best Practices for PP and QM master data, as well as the BPs for Creating and Completing inspection lots.
I have 03 activated for my inspection type usage.
When the PO is released, I am not seeing an auto inspection lot.
Please suggest the troubleshooting steps to solve this issue. Some are auto creating and some are not, but my QM MData is correct for inspections...
Thanks
Verroz

Hi Craig,
I guess 'Insp. Char. required' in control key flagged or not, does not affect Inspection lot creation.
I just checked for existing 03 inspection lots and we do not have this field flagged.
My understanding is also based on F1 help which states
In the following situations, consistency check for the task list generates a warning message:
if you set the indicator in the control key but have not maintained
inspection characteristics for the operation or phase
if you have not set the indicator in the control key but have maintained
inspection characteristics for the operation or phase
Or have I missed something here?
Amol.

Inspection Char without Inspection lot generation

Hi
We are trying to model a customer requirement in PP for which a few production steps have a few characteristics to be monitored (status checked); for example - in a process of "spraying fertilizer", qty of 4 fertilizers have to be noted in the operation. Now these cannot be included in the BOM for some costing issues. We are apportioning the cost using an internal order in FI.
Can these be modelled in PP as inspection char. for which values (readings) have to be noted without generation of inspection lot?
Any ideas?
Deepak

Hi Deepak,
One thing you need to clear is that without inspection lot generation you cannot record the values. Instead, you can create the inprocess inspection lot which does`nt effect the actual production, you can record results such as quantity etc.. for each operation for ur reference.
The secong thing you can do is select any field or the text box that you are not usingit currently in the confirmation and enter the characteristics in that field.
Final option is to create a document and save it with reference to ur order no. , bom etc..
Reward if cleared and close the thread.

Inspection lot generation after every 5th goods receipt

Dear Gurus,
There is a scenario in my project. There are some materials for which the inspection is done on every 5th goods receipt. The inspection of the material will be done for the first time it is coming in the company's premise and for the next four time it will be forwarded directly to the production without any quality inspection. Is it possible in sap to create inspection lot after every 5th inward delivery? Or can anyone suggest me a way to capture this scenario in sap..
Regards,
Abhishek

Hi
This is possible by using DMR in Task list.
Go to tcode QDR1-->Create a DMR with
follwoing steps;
Dyanmic modification : on Lot level
F5
Stage 10 Inspection seviarity :4 Skip :balnk ist: tick Text:first stage
OK
No of Inspectin:1
Max. skip duration:Blank
New insp. stage:20
NOT OK
Rejections 1
New insp. stage:10
Stage 20 Inspection seviarity :blank Skip :tick ist:blank Text:second stage
No of Inspectin:5
Max. skip duration:Blank
New insp. stage:10
NOT OK
Rejections 1
New insp. stage:10
SAVE
Now use this DMR in task list header at Lot level.
Attach this task list to inspection lot
make sure that you have ticeked on Skip & Auto UD in QM view.
Then in QA16 schecule for Auto UD after every 10 mins or 30 mins.
at plant level also make auto UD & skip 30 mins.
This will skip the 4 lots & UD will be taken in background.
After that it will come to QI
Revert back for More querries.
Regards
Sujit

Control Inspection Lot Generation

Hi Experts,
I have a requirement where I need to use Inspection Type 04 in 2 ways.
1) For FERT material types inspection lot should be generated automatically.
2) For HALB material types inspection lot should not be generated. The client will generate the inspection lot manually if he finds any problem with the lot.
A step by step guide to configure this in SAP System would be highly appreciated.
Thanks,
Rahul

I think you will have to use the user QPL10001 exit to suppress the HALB inspeciton lots. The coding shouldn't be hard as long as this iis consistent across the business. You'd simply suppress the lot for all HALB material types that are not manually created. (QALS-QSTAT01 is the field to detrermine if the lot was manually created or not). But as soon as one HALB anywhere in the business requires automatic inspection lots your user exit would get in the way.
So if you go this route, you might also want to create a new material type, something like "ZALB" that would allow automatic inspections. Another option is to use a special field like the cross-plant material status field if you aten't using it. Set up one code for inspection, and one for no inspections. Code the user exit accordingly.
Another option, which I don't know if you have considered, is to allow the automatic creation of your HALB 04 inspection lots. Just create them all as skip lots with posting directly to unrestricted inventory. That way, if a problem arises, you can go into the created inspection lot and use it, or if it has been processed already by the auto UD for skip lots, you can create a new 04 lot manuallly. This would require no development and is all standard SAP.
FF

Inspection lot generation during 322 movement type

Hi Experts
whenever we clear inspection lot from Quality we are having one issue first time user has given wrong UD code as Accepted,but that wasactually wrong,what he does is he will reverse the Lot through 322movement type,And again actually the material had to be sent for reprocess as shade is not matching,
So the user will send the same material for Reprocess to Storage location-PF09.
while doing 322 a new inspection lot is getting generated.while doing 322 movement why system is geenerating a new lot.Can we not make 322 in same inspection lot.
Regards
sandeep Patil

Hi sandeep,
You would have maintained inspection type -08 for making 322 movement type as otherwsie i dont think its possible to reverse the material to quality stock
As you have maintained inspection type -08 so it will cerate a new inspection lot to execute 322
Hope i have made it clear
Regards,
SVP

Inspection Lot Generation

Hi Gurus,
I want to generate inspection lot numbers plant wise while doing goods receipt. Is there any user exit available to do this or can we do this in standard transaction?

Hi,
If you want to view the inspection lots plant wise (eventhough the number range is same) then you can do so by entering the plant number in the initial screen at transaction code QA32 / QA11 / QE51N. These inspection lots are generated / reported / analysed plantwise eventhough the number range is not plantwise.
Regards,
Prashant

In process Inspection Lot generation

Hi Experts,
To create '03' type inspection lot the prerequisites are
1. material master maintained with '03' inspection type
2. order type is maintained with '03' inspection type.
Now if the routing do not have operation with control key 'QM02 or 03' OR
at the time of creating the production order, if the user deletes the operation with control key 'QM02 or 03' the system will still create inspection lot.
Is there a way to avoid the this inspection lot creation ? (since some the routing in different plants or some production orders need not have inspection lot created. ie can it be controlled by control key assignment ?)
Regds
Jomy

Jomy
you can't restrick based on control key.
If you don't want system to create automatically better don't assign inspection type to Order type
or if you don't want 03 inspection for some material & Plant - don't activate
these the std solution
or You have to devlop some logic based on your requirement before creating inspection lot check the control key qm02/03 and create lot- give to devloper
let me know if this is helpful or not
Thanks
Sami

Auto Inspection Lot Creation.

Dear Expert,
I have created new inspection type as Z01 by copying the 01 and I have maintain Inspection Lot Origins and Assign Inspection Types under 01. After that I have assigned my new inspection type Z01 to material master and activated it with material post to quality. Up to this it is working fine but after GRN system is not creating the lot. Even thou material is posting to the quality stock but no lot is in QA32.
But if I Create the lot wih QA01 it working fine and I'm able to do the UD also. But for no automatic lot generated for purchase order.
Please provide the details how to resolve this issue?
Thanks and Regards,
Manish

Dear Manish
These are the procudural steps when going to create a new inspection type
1) Maintain task list usage - SPRO> QM> Quality Planning > Inspection Planning> General> Define task list usages
2) Maintain inspection type - SPRO> QM> Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Maintain inspection types (for eg Z89) - Also maintain the task list usage here
3) Maintain Quality inspection lot origins and assign inspection types - SPRO> QM > Inspection Lot Processing > Inspection Lot Creation > Maintain inspection lot origins and assign inspection types
4) Define default values for inspection type - SPRO > QM> Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Define default values for inspection type
5) please check for any user exits in MIGO which have been used which is creating any issues.
Regards
gajesh

Inspection lot generation for 343 movement type.

Hi,expert,
My client's requirement is to generate inspection lot when a specific type of material is transferred from block stock of a storage location to unrestricted stock of another storage location i.e. movement type- 343, can anybody please explain how to generate the inspection lot and what are the settings, master data to be maintained? thanks in advance.
rgds
rajib

Hi Rajib,
In first place you need to have Quality infor record for material and vendor create through QI01 t code.
QM must be activated for mvt type 343 in SPRO --> QM --> Qual Insp --> Insp Lot Creation --> Inspection for goods movements.
Check the box "QM Proc. Active" in Mat master in Quality tab.
Activate inspection type 08 in mat master.
Then do the transfer posting you will get mat doc number.
Go to display mode of mat doc,
You will find Ins lot number created in Quantity tab at item level of material document.
Thank You,
Anand K

Inspection lot generation notification

Hi All,
when an inspection lot is genertated upon good receipt is ther anyway were i can create a notification to the concerned user for inspecting the lot.secondly if ihave 50 inspection lots generated in a day dou have any option through which i can assign the ispection lots to the concerned users or Quality inspectors.
Suggestion willbe worth appreatation.

Hello
1) Alert Management is an SAP function. You will need an ABAPer to develop this functionality. You can either specify that alert should trigger to these many people or it can be particular role based so that alert to goes only to those persons who has those roles.
please check this link for information on
Link: [http://help.sap.com/saphelp_nw2004s/helpdata/EN/42/ed08baf3401a61e10000000a422035/content.htm]
Link: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60c24b82-6da9-2a10-5a93-f1f729d89787&overridelayout=true]
2) What you mean assigning inspection lot to an inspector? What is the exact requirment ? Normaly who is doing the result recording is taken as the inspector. If you use inspection point you can record who was the inspector
Regards
Gajesh

Inspection Lot generation for Movement type 101-O

Hi
I would like to know, which config / Master data need to generate Inspection Lot for Movement type 101-O.
I enter subcontract vendor number and set 'SC Vendor' indicator in purchase order delivery address tab and I created QM data in Material Master.(Insp.Type 01)
While doing GR with reference to purchase Order, stock is Posted to Material provided to vendor - Quality inspection stock. But Inspection Lot
is not generated.
Pl suggest me, What should i do to generate Inspection Lot.
Thanks in Advance.
RRS

hi
Soln 1) Just check whether Inspection is active for 101 - O in SPRO settings if not, activate the same.
Path: Inspection Lot creation/Inspection for Goods Movement
Soln 2) As you flag "SC Vendor" in PO and make GR all stocks will be shown against the Vendor.
From your question I assume that you would like to do inspection for materials coming from Subcontactor end to your Plant:
If this is the case you dont flag "SC Vendor" in PO, make a normal Goods Receipt for the Subcontracting PO, based on Insp setup in Material Master for 01 Insp type Insp lot will be created.
Regards
DC

Updating of QM info structures on the basis of inspection lot creation date

Dear Gurus,
Our business requirement is as follow:
Suppose MM has received 10 consignment of a material (Goods receipt) against a material in month of Feb-2008 from a particular vendor.
Inspection lot statistics in MCXA is updated on the basis of inspection lot generation, which is as per our requirement.
Suppose this inspection take 2 days for analysis at laboratory.
Now FI has to make payments for the month of Feb-2008 against this inspection results. They need the value of average quality parameter for the month of Feb-2008. (Average value of all quality parameter for the material of all the inspection lot which are generated in Feb-2008)
I want that QMIS should update on the basis of Inspection Lot creation date not on the basis of result recording system date.
I think there should be some configuration settings available for this purpose.
Please help me out.
Regards
Honyal

Any valuable input are welcome
regards
Honyal

Control on the Creation of Inspection lot

Hi all,
In my requirement, we have a material which is subcontracted and in the process, we will have some rejection. Hence the rejected material will be received in to the system with an account assignment category (cost centre). For both the line items in the PO, the inspection lot will get triggered, but the requirement is that the lot should not be generated for the rejected material.
thanks & regards
Chaitanya Rayaprolu

Hi Chaitanya,
Well, I observe a functional loophole here.
1.     As you mention, you inward rejected material against cost center, it means you must be using account assignment category K in PO.
2.     My question is, if the material is rejected, why you are inwarding it against cost center as it consumes the value on your account and not on vendoru2019s account.
3.     Ideally it should be debited on vendoru2019s account if its vendoru2019s fault.
4.     The practice should be, inward all the material irrespective of rejection. Reject the material through 122 movement and proceed for payment for the acceptable quantity.
Letu2019s talk about your scenario where you donu2019t want inspection lot generation
1.     Whenever you inward the material with account assignment category as K the stock gets consumed at the same moment and you observe no rise in stock level.
2.     But if you have activated inspection type 01 in material master, system creates inspection lot for this movement.
3.     Kindly note this inspection lot is stock irrelevant.
4.     That means you need not do stock posting. Only UD is sufficient as the lot doesnu2019t contain any stock.
5.     Albeit you donu2019t want system to generate lot, you may explore user exit QPL10001 and write your own logic that whenever account assignment category is K do not create inspection lot.
Regards,
Anand Rao
Edited by: Anand Rao on May 9, 2011 2:47 PM

Purchase requisition to be created when Inspection lot is released

Hello,
A Purchase Requisition need to be created (for external services) at the time of Inspection lot generation. I tried using the Inspection Plan operation control key with 'Extenally processed processing' with Info record, Pur Org details.. etc. Still, when Inspection lot is released, Purchase requisition is not generated.
Any clue?
Thanks
JK

Can you explain your business scenario.
In standard QM you cannot create purchase requisition from inspection lot creation.
1. You can use Userexit QAAT001 to create purchase req if needed.
2. Refer to "external processing in QM' if you want to create Purchase req during production.
http://help.sap.com/saphelp_46c/helpdata/en/42/75f1e256cc11d1896a0000e8323c4f/content.htm

Auto Inspection lot generation

Similar Messages

Maybe you are looking for