Auto install flash player to the client where the flash.exe was located on serve
Good day!
I created an intranet site for the company and it is on the server, so the staff can view it. My webpage consist of flash for the viewing of images. The problem is the client who can view my webpage has no flash installer or totally no flash installed on their computer. Actually I have a flash.exe or flash installer in my server. I want to happen is when they view my webpage there is a pop up message for the auto install of flash installer and once they click automatically the flash would be installed. I mean the location of installer in the server they can catch? Is it possible?
Honestly, I have no idea about it. I have a lot of idea and questions in my mind on how the client can have the installer through pop up or any way.
Thank you
It is definitely not something you can do with Flash Player; especially when the Player is not even installed on the client side.
You will need to do something with Flash or ActionScript, so you better ask in the Flash or ActionScript forum.
Similar Messages
-
I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!! -
When rendering a SSRS native mode report based on a query to SSAS the report with fail with the following error:
An error has occurred during report processing. (rsProcessingAborted) Cannot read the next data row for the dataset. (rsErrorReadingNextDataRow). The connection either timed out or was lost. Unable to read data from the transport connection:
An existing connection was forcibly closed by the remote host.
Putting a trace on the SSAS instance, I get an error:
Internal error: The operation terminated unsuccessfully. The connection timeout was exceeded. Server: The operation has been cancelled.
I've modified the IIS (6) application pool timeouts, the SSRS rsreportserver.config timeouts, and the SSAS timeouts. Restarted services, rebooted, and still I get this error.
The report will render if I select a shorter time period (less data, shorter query time).
Running SQL2012 (11.0.5058.0), SSAS and SSRS on separate servers, same subnet.
Any help or suggested troubleshooting greatly appreciated.Please check the links below.
http://www.symantec.com/business/support/index?page=content&id=TECH186577
https://support.microsoft.com/kb/2200755?wa=wsignin1.0
http://msdn.microsoft.com/en-IN/library/ms155782.aspx
http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx -
SCOM agent install fails Error 80070035 - the network path was not found
I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
I added a specific rule to allow TCP 5723 and 5724
DCOM is enabled
I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
did install to) and the server has plenty of disk space available
I am not sure what else to look at so would welcome any ideas
ThanksHi Petro,
I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
Also check if your agents have the WMI service started and enabled ?
Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
Component A
Component B
Minimum Requirement
Root management server or management server
Agent
64 Kbps
Root management server or management server
Agentless
1024 Kbps
Root management server or management server
Database
256 Kbps
Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
Also post the event logs of the Agents which are in not monitored state for analysis.
SCOM Agent installation failure error codes
Error
Error Code(s)
Remediation Steps
The MOM Server could not execute WMI Query "Select * from Win32_Environment where
NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
Operation: Agent Install
Install account: domain\account
Error Code: 80004005
Error Description: Unspecified error
80004005
1. Check the PATH environment variable. If the PATH statement is very long, due to lots of installed third party software - this can
fail. Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
2. The cause
could be corrupted Performance Counters on the target Agent.
To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
prompt. Press ENTER after each command.
cd
\windows\system32
lodctr /R
Note /R is uppercase.
Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
How to manually rebuild Performance Counter Library values
http://support.microsoft.com/kb/300956
3. Manual agent install.
The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access
3. Inspect WMI health and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
Operation: Agent Install
Install account: DomainName\User Account
Error Code: 80070005
Error Description: Access is denied.
80070005
80041002
1. Verify SCOM agent push account is in Local Administrators group on target computer.
2. On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
Disable McAfee antivirus during push
The MOM Server failed to open service control manager on computer "servername.domain.com".
Therefore, the MOM Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
800706BA
1. Firewall blocking NetBIOS ports
2. DNS resolution issue. Make sure the agent can ping the MS by NetBIOS and FQDN. Make sure the MS can ping the agent by NetBIOS
and FQDN
3. Firewall blocking ICMP
4. RPC services stopped.
The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
on this computer, please retry the Push Agent operation after some time.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 80072971
Error description: Unknown error 0x80072971
80072971
This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
%windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
http://support.microsoft.com/kb/934760/en-us
The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Remote Computer Name: servername.domain.com Install account: DOMAIN\account
Error Code: C000296E
Error Description: Unknown error 0xC000296E
C000296E
1. Netlogon service is not running. It must be set to auto/started
The MOM Server detected that the following services on computer
"winmgmt;(null)" are not running
C000296E
1. WMI services not running or WMI corrupt
The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: C0002976
Error Description: Unknown error 0xC0002976
C0002976
1. Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
Install account: DOMAIN\account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
80070643
1. Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
Call was canceled by the message filter
80010002
Install latest SP and retry. One server that failed did not have Service pack installed
The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
share exists.
80070006
1. Manual agent install
Possible locking on registry?
http://www.sysadmintales.com/category/operations-manager/
Try manual install.
Verified share does not exist.
The network path was not found.
80070035
1. Manual agent install
The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
80070070
1. Free space on install disk
The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
80070079
NSlookup failed on server. Possible DNS resolution issue.
Try adding dnsname to dnssuffix search list.
The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
8007041D
80070102
NSlookup failed on server. Possible DNS resolution issue.
Verify domain is in suffix search list on management servers.
The Agent Management Operation Agent Install failed for remote computer "name"
80070643
1. Ensure automatic updates service is started
2. Rebuild WMI repository
3. DNS resolution issue
The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
80070652
Verify not in pending management. If yes, remove and then attempt installation again.
The MOM Server detected that computer "name" has an unsupported operating system or service pack version
80072977
Install latest SP and verify you are installing to Windows system.
Not discovered
Agent machine is not a member of domain
Ping fails
1. Server is down
2. Server is blocked by firewall
3. DNS resolving to wrong IP.
Fail to resolve machine
1. DNS issue
The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
8007046A
1. This is typically a memory error caused by the remote OS that the agent is being installed on.
There are currently no logon servers available to service the logon request.
8007051F
1. Possible DNS issue
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
of the Windows Installer service.
8007064D
1. Install Windows Installer 3.1
The network address is invalid
800706AB
Possible DNS name resolution issue.
Tried nslookup on server name and did not get response.
Verify domain is in suffix search list on management servers.
The MOM Server failed to perform specified operation on computer servername.domain.com
80070040
1. Ensure agent push account has local admin rights
The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
80072979
1. Correct DNS/WINS issue.
2. Try pushing to NetBIOS name
Gautam.75801 -
I own Photoshop CS4 and get messages that updates are available, but when I go to install them I get the following message,
"There was an error downloading this update, please try again later." I have tried numerous times with no success. What am I **** wrong?Delete all content from following location on your machine and try updating again.
Win 7 and higher: <os-drive>:\Users\AppData\Local\Adobe\AAMUpdater\1.0\
Mac OS (User Library): ~/Library/Application Support/Adobe/AAMUpdater/1.0/
Please refer:
Access hidden user library files | Mac OS 10.7 and later
Let me know if it works for you.
Regards,
Ashutosh -
This has happened in other instances as well. My default browser is Firefox 8.0
Did you try booting the fallback image? It usually works. If not, just boot the install cd, chroot, rebuild the initcpio, done.
Might want to try booting with apci etc disabled too.
Also see: https://wiki.archlinux.org/index.php/In … modules.22
Last edited by Mr.Elendig (2011-10-08 15:44:06) -
The iTunesSetup.exe was interrupted.
what do i do when this comes up after my download freezes after 99%????? im running windows vista SP2 and i have IE9??
Hi Romano!
Answer to your question.
1. My computer operating system is Windows 8.1K, 64 bit.
2. I purchased my AdobePremierElements11 in July 2, 2013. I have serial number.
3. When I re-installing the AdovePremiereElemments, It was removed automatically.
So there is no the program in the Control Panel/Programs. I checked back directly.
4. My computer was not infected with a virus.
5. In the Local Disk (C:)\Program Files (x86)\Common Files\Adobe\
There is no folder name of the OOBE and OLDOOBE.
Suspicious circumstances.
I tried to install the AdobePremierElements11.
I entered my information( name, country, serial number)
and I started the installation.
But since about 85% proceeded the installation program stopped and computer can't seem to installation.
I had to reboot the computer.
and I have tried to install.
Strangely, my costomer information( name, country, serial number) came floating up in the 'IstallShield Wizard Pop-up Window', even though I do not enter my information.
When I click Next button to continue 'IstallShield Wizard Pop-up Window' say "IstallShield Wizard Completed and The installation wizard was interrupted while installing Adobe Premiere Elements 11. Your system has not been modified. To complete installation at another time, please run setup again. Click Finish to exit the wizard."
So I and finished.
As a result, I could not install the program.
That's all.
Please help me.
Thank you -
I misplaced my iPhone and used Find My iPhone to locate it. The map showed my home and the apparent location of the iPhone which was five miles south of my home in a heavily wooded area. It turns out that was an incorrect location as I eventually found my iPhone in my office three miles in the other direction. Can anyone provide m with an explanation for the discrepancy and inaccuracy?
This topic has been frequently discussed on these forums. Try a search to see the various responses.
-
The Network Path was not Found - Server 2008
I am managing a Windows Server 2008. When I go into the Group Policy Management Council and attempt to edit, or add group policy it comes up with an error "Failed to open Group Policy [...] The Network Path was not found." I am new to using Windows Servers and quite confused as to the problem.
Hi,
This problem may be related to network access. I list some common factors and corresponding troubleshooting steps as below. Please check them one by one and let me know the result.
1> DNS issue
From the problematic PC, please run the following commands and then check if the issue still exists:
1) Can you ping FQDN of the DCs in your networks?
2) Can you ping IP of all the DCs in your networks?
3) Does the DNS configuration point to the correct DNS server?
2.
1). Start -> run -> cmd
2) Type nslookup, and then press Enter; Type set type=all, and then press Enter.
3) Type _ldap._tcp.dc._msdcs.<yourdomainname>, and then press Enter to check the result.
If SRV records could not be resolved successfully, please type 'net stop netlogon' and 'net start netlogon' to regenerate SRV records.
2>. Permission
Ensure you logon DC using the user with domain administrator privilege. If so, please check if you have the proper permission on sysvol files under %systemroot% and inf file under %system root%
3>. PDC is not available.
By default, Group policy object editor connects PDC role to enumerate GP settings. Please
refer to the following article to confirm which DC is PDC role:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
How to view and transfer FSMO roles in the graphical user interface
http://support.microsoft.com/kb/255690
After locating the PDC role, please logon it and see if sysvol file under %systemroot%\SYSVOL\ has been properly shared and has the correct structure.
If not, you can refer to the following KB to rebuilt Sysvol tree.
How to rebuild the SYSVOL tree and its content in a domain
http://support.microsoft.com/kb/315457/
4> We can control which DC is preferable DC that Group policy object editor connects by default via GP, which is User configuration\ administrative template\system\group policy\domain controller selection. Also, please enable it as 'Use any available Domain controller' and run 'gpupdate \force' to test the result.
If this issue still continue, please post back. -
Run big report in PDF hangs though the PDF file was created in server
When running Oracle reports6i big master-details-details report(220 pages) in PDF format thru report server CGI on Netscape Enterprise Web server, it hangs. But the pdf file was created when checking in the server and is good when it's viewed directly using IE. Also checked the http://domain_name:8083/cgi-bin/reportcgi/showjobs?server=repsrv, the Job Status was 'FINISHED'.
The HTTP_error_Log in the server is:
[17/Feb/2004:13:31:42] failure (28995): for host 63.237.37.70 trying to POST /cgi-bin/reportcgi, cgieng_scan_headers reports: the CGI program /usr/netscape/elecprod/cgi-bin/reportcgi did not produce a valid header (read failed, error is Resource temporarily unavailable).
Please help as our users demand it urgently.
Thanks a lot.1) This bug734197 is fixed in version 3.0.5.13.0, which means it should be available in 6i (the version you are using) also. But from the bug description I see that it is reproduced with Reports 6.0.5.28.0 version also. If your reports 6i version is higher than this, it may contain this fix. Best thing is to apply the latest patch. The patches should be available in metalink (metalink.oracle.com) .
2) For troubleshooting purposes run the report in html/rtf and see whether it times out. ( just to see whether
this is a PDF specific issue)
3) Disable acrobat web integration (in Adobe acrobat settings) and try . This will prevent Acrobat reader from opening the pdf automatically and instead will show a dialog to save the pdf report ( There are some IE - Adobe issues which are not reports bugs).
4) There were some threads some time back which had this problem with long running reports and PDF. Finally it turned out to be webserver timeout problems. Pls see ( this is for 9i servlet and Apache webserver, but for 6i also it could be similar)
Re: Long running reports end successfully - present s "page can not be foun
5) If these does not work and if you are not able to make further progress, I suggest you to get in touch with Oracle Support (if you have a support contract) to solve this issue. [ If the possibility is that the bug you are mentioning is not pushed forward to 6i (a remote chance) then only they will be able to a get a oneoff patch.]
Thanks
Ratheesh -
Auto install another app with the installation of AIR app
Hi
I am new to desktop application development. I am stuck on an issue.
My air application uses another application installed on user machine to capture the screen shots. I want to bundle this third party application (screen capture software) installer with my AIR application so that When user will install air app this screen capture application will automatically install on user machine.
My whole motive is to automatically install screen capture software on user machine with installation of AIR app without user notice. I dont know how can I accomplish it.
ThanksEvery time that i turn on windows and i want to open an app
that use adobe air ask me for a new version,
and i check all the installed software and adobe air dissapier from that list.
Please HELLPPPP!!!
thaks -
I have typed in my message several times, am told I cannot post a blank message. It is not blank. What now?
How do I find this activity monitor on my Mac? | Apple Support Communities
-
How to open .exe file located in server system by the client system
hi,
i am using tomcat 5.0 as server and jsp as front end.
I placed some of the software in the server system.I want to open the exe of those software from the client system when the user clicks the button.
I am able to open them in the server system itself but if i try to open it from other system(client system using ip address of server system), the exe file gets opened and displayed in the server system only but not in the client system.
any idea???
Please help.
Thanks & Regards,
sirishai am not using applets and downloading the software to clients machine is not required, the user has to click the "open software buttton" and it should get displayed in his system.
anyhow can u give me some idea on using applets--- iam not good in applet coding.
thanks & regards
sirisha -
How to download the files, that are located in server, from the client?
Hello folks,
My program is like that, the files are located in the server and stored in file system.
I can only know the server name and the directory listing, so that I can show the file names from that directory on the browser.
The user might downloads those files from the browser and he might deletes those files through the browser.
That user has valid right to do so and the files can be any type of extension.
So how can I write this kind of program? Currently the whole system is in struts, so how can I make compatible with struts technology?
Do u have any ideas?
Regards,
PhyoThank you, grigpm. But actually I want the user to select the file that he wants to download rather than setting it in the configuration file. If it is possible, let me see the sample code of FileManager servlet. I've tried with some ways but I can only download from the same server with the application server. I want to download from different server. I hope someone can help me with sample code....
Best regards,
Phyo -
Loading...
Hi sabineolt1,
Your post indicates you are the operating system on your Mac is 10.5.8
If that is correct, you will need to update to at least 10.0.6 in order to use the Mac App Store and redownload your purchased apps.
Cheers,
Judy
Maybe you are looking for
-
Unable to preview folios in Adobe Content viewer using Samsung Galaxy Tab 3 (SM-T210)
Hi, I am using Samsung Galaxy Tab 3 (SM-T210) Android Version 4.1.2 .The folios were not displayed and I only get a black screen, despite the fact that I was able to download the Adobe Content Viewer latest android version (3.3.0.0.87854), the Andro
-
Is the ACR 8.4 a update bad? it's still available for installation
is the ACR 8.4 update bad? it's still available for installation. Has anyone updated and is not having problems? I really don't want to uninstall all of the CS6 suite
-
10.3.9 and force quits
hi have some probs on the beige with 2 hard drives running 10.3.9 when i force quit an application why does it still show in the task bar and is there anything i can do to kill them? it does not work when i kill it but then when i do i get the spinni
-
Link between Rules and Organisation assigned in Rule Modeler
Hi, Go to Transaction CRMC_BSP_ANALYZE, Give Application Name: CRMM_ERM_RULES It will go to Rule Modeler: In this just click GO button. You will get the Policies. Click on the Policy you will get different rules. When We drill down the rules and sele
-
Has anyone been able to export to flash using a Blu-ray Project in CS3?
Has anyone been able to export to flash using a Blu-ray Project in CS3? If so what files, settings and OS were you using? Whenever I try to export to flash from a Blu-ray project the program always crashes.