Auto-load SAPBEX.vba when opening the workbook

Hi,
I open a query from SAP BW ... I make all the changes I need and I even check the box that says Refresh query everytime you open the workbook. The problem is that when I open the workbook it's just like a regular Excel...because the SAPBEX.vba file is not loaded anymore.
Any ideas on how can I solve this?
I want the workbook updated with the latest data every time I open the workbook.
Thanks!

Hi,
Please reinstall the FEP with latest it should resolved your issue.
Thanks,
Venkat

Similar Messages

Critical program error in BEx designer when open the workbook

problem is coming related to Workbook.when i m opening the workbook then busiess explorer giving the error messgae i.e * A critical program error has occured. The program will now terminare.please refer to the trace for further information * kindly please provide the best solution for this problems.

hello , I got the same error while opening a workbook, and I found that this is happening coz I made some changes in Query structure contained into workbook.
So when you are opening and inserting the input variable do following things:
1.Open the workbook and insert the variable, but do not click "OK" just click on "CANCEL",
and your Workbook will display without data .
2.Now go to "Design Mode" reinsert the query by refreshing dataprovider(data analysis grid), and do the changes if you required and exit design mode,
3. Save workbook and now insert the variable values and check the work book will work without any error.
Thanks Hope it will help, coz it helped me.

I want run Macro using other sheet when open the workbook in server,how do?

HI ,
I save the workbook in BI server using one query.And I Insert a lot of sheet in the workbook.I want to change other sheet base "table"'s varient. I wirte some Visual Basic script (VBS) In the event of workbook's open . but it doesn't run . I think the reason is that the analyzer change the varient after opened the workbook .how can I do? thank you

UP..

Auto refresh when opening a workbook

Hi
When I open a workbook, I would like the query to auto refresh. In that way the planning user will see the latest planning values and not the ones saved in the workbook.
Is there any functionality for running the planning function refresh automatically when the workbook is opened?
Kind regards
Erik

Hi Erik,
Once you open the workbook, just right click on result area and select properties.
In that select the Interaction tab and then check Refresh query when opening workbook.
Then dont forget to save the work book.
Regards,
anil

In PowerPivot, can I configure a slicer/timeline to automatically select the recent N days when someone opens the workbook?

For example, is it possible to let a slicer/timeline automatically select last 7 days whenever someone opens the workbook, so that one can always see the latest data without having to manually click/drag to select the most recent time range. Can I achieve
this?
Thanks.

yes
Add an extra custom column to the calendar which is called RefreshDate for which the formula is =today().
Now the rest is up to you as to how you want to do this. You could add a column TodayMinus1 defined as =IF([Date]=[Refresh Date]-1,TRUE,FALSE)
Personally I would rather have the Refresh date supplied from the database when you connect to refresh.
Hope That Helps
Mark

When I click the Editor, it loads but does not open the Editor page. Options?

When I click the Editor, it loads but does not open the Editor page. Options?

Try making separate desktop icons for the Editor and Organizer. You can then launch directly. The standard desktop icon is for the welcome screen which often runs in the background or doesn’t shut down properly.
Start by right-clicking on the desktop and select:
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Photoshop Elements 13
Inside the Photoshop Elements 13 folder make sure you select the application (not a shortcut) by scrolling down to the files beginning with the letter P and highlighting ‘PhotoshopElementsEditor’
Then click next followed by finish.
You can repeat for the Organizer using the different file path.
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Elements 13 Organizer
Highlight ‘PhotoshopElementsOrganizer’
Then click next, followed by finish.
Now that you have your separate desktop icons you can delete the one for the welcome screen, if preferred. On Mac try launching directly from Applications. [if not using PSE13 substitute your own version and go to Program Files (x86)]

When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

How to execute a Macros automatically when opening a workbook

Hi people:
I've done a macros routine in order to make some arithmetic operations. When I execute the macros manually works fine, however, when I open the workbook and put the filter values the macros isn't executed.
Sub calculate()
End sub
Can anybody tell me if my code has to be in a special place or to have a special function in order to be executed any time the workbook is opened and refreshed?
Thanks in advanced. Points for helpful answers

Hi,
I have done something very common. First for open the workbook:
In the VBA Editor you have in your project in the "project window" two entries. Excel Objects and modules. In Excel Objets you have the workbook and the sheets. Got to the entry Workbook (double click) In the now opening code window you have to pulldown menus. Choose Workbook in the left one and Open in the right one. The code for the routine / handler appears automatically in the code window. Implement you code here or just call your routine.
Changes: Do exactly the same as in the method descibed above but from the left pull down menu choose SheetChange. This method only has the Con that it will execute not only by refresh but also by every change on the sheet. If you want to have it only by refreshing then:
SAP 3.5 - use the SAPBEXonRefresh method as described by Bob
SAp 7.0 - int the properties window of your workbook you have a possible entry: In the register Exits you can enter your macro at "Run macro on refresh". If you set the option "Refresh Workbook on open" in the register General then you achieve what you want only by implementing the macro in "Run macro on refresh".
regards, Lars

Newly added discoverer responsibility does not open the workbook sheets

Adding reports to newly added discoverer responsibility does not open the workbook sheets
Actually its a new responsibility where i add existing workbook, also shared the business area but when trying to execute the report through my user firstly it says "Workbbok cannot be expanded, Unable to open workbook" later when i close the page i get the below error
“Contact with the Discover server has been lost. To continue with your work, please restart Discoverer Plus. If this problem persists, please contact your Oracle Application Server Administrator” error message.
Please suggest.

Hi,
You need to run a trace for this user to diagnose this issue. Look at note 133055.1 for more details.
Rod West

Final Cut hangs with "Loading Motion Content" when opening library

When opening one of libraries I almost immediately get a beach ball and see "Loading Motion Content" under "Rendering" in the Background Taks window. Final Cut hangs and I am forced to restart. I don't have any version of Motion and this problem just appeared in this library.
Any suggestions? I've used Preference Manager to trash preferences to no avail.

I followed the procedure suggested by Luis Sequeira1 in several other threads and deleted the flexolibrary. I no longer see any "Loading Motion Content" message when opening the library and the it seems to be ok, with all the media, multicam clips, compound clips, and projects as expected.
I have three questions:
1) What information does the flexolibrary contain?
2) How is Final Cut able to recreate a flexolibrary?
3) Might deleting the flexolibrary be a way to solve all sorts of problems with libraries?

The hidden columns of wrokbook will appear when refresh the workbook

Hi,expert.
I create a query,the query has 3 columns,
Fields Name: Col_A, Col_B, Col_C
Fields Value: 1001.....001 ... X
I want to connect the Col_B and Col_C, so I add a column Col_D, like this:
Fields Name: Col_A, Col_B, Col_C, Col_D
Fields Value: 1001 ... 001 .. ..X .... ..001X
and then I hidden Col_B and Col_C in the excel. save the query as a workbook.
When I open the workbook,and refresh it,the hidden Col_B and Col_C were appear.
PLZ tell me how to hide the columns Col_B and Col_C, If I refresh the workbook,they will be hidden either.
My BEX Analyzer version is BI AddOn 7.x(based on 7.10), Support package 8, Revison 1408.
TKS.
Edited by: Bruce Wang on Jul 26, 2010 11:28 AM
Edited by: Bruce Wang on Jul 26, 2010 11:29 AM

Hello Bruce,
As mentioned by others.
If it is possible, try to hide these two columns in the query designer.
If there are few calculaions need to be done in excel with these fields, then include a macro to the hide these columns.
You need to include the code to hide these columns to the exit macro 'call back'.
Hope this helps.
Regards,
Hari

After 11.5.10.2 Upgrade, error coming when open the form.

Hi Experts,
After upgrading application from 11.5.8 to 11.5.10.2(successfully applied u3480000.drv),
when try to open the form it gives error like
"Illegal Constant pool type", when applet loading,
I tried to open the form like
http://hostname.domainname://port/dev60cgi/f60cgi/
still im getting the same error, i cant able to open the forms,
Apache Error log says like
"Client denied by server configuration"
Please advice me to solve this issue.
Thanks
R.Sundaravel

Hi,
Please verify that you have no invalid objects.
"Illegal Constant pool type", when applet loading, Clear the server cache, bounce the services and check again.
Apache Error log says like
"Client denied by server configuration"Review this document and see if it helps.
Note: 748228.1 - Unable to Login. Page Can Not be Found Error When Connecting Via Appslogin
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=748228.1
Regards,
Hussein

Use Compression when Storing the Workbook

Hello expert:
what does it mean for "Use Compression when Storing the Workbook" in Bex analyzer?
Many Thanks.

Hello,
Set this indicator if your workbook includes a large amount of information and metadata and you want to reduce the space required by your workbook by compressing the data in the workbook when you save it.
You can use this option if, for example, you are working in formula mode and want to view the data in your result set without having to connect to the server (Provide Results Offline). To do this, you must first save the result set in the workbook. If you do not do this, the data is not available in the cells the next time you open the workbook; only the formulas are displayed.
Hope this will help you
Kind Regards
Noon

Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

Hi
Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
The second source has a huge list of company names that can be narrrow by email work.
background:SP 2010 and Infopath 2010
CRISTINA&amp MICROSOFT Forum

I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
Regarding filtering dropdown list then this could be done by applying form on-load rules.
Hope this helps

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks.

Auto-load SAPBEX.vba when opening the workbook

Similar Messages

Maybe you are looking for