Auto lock every 15 second in my iphone4s
Hi...i have set my iphone4s auto lock for 1 minute.....but after about 15 second, after the screen lock.....the screen light up...and after about 15 sec it lock again....this blinking process non stop...what happen?
Are you facing this same problem on all the Wireless Computers?
You need to keep your router on a location where it can get a proper ventilation.
Similar Messages
-
Goes into auto lock every few minutes
My iPad is getting slower to startup, this last startup was difficult to initiate. Keeps going into auto lock, especially with any handling of the left hand shorter side of the iPad.
It could be set up that way. The iPad will go to sleep when it hasn't received input after a specified period of time. Check the settings. Settings>General>Auto Lock> How long is it set before it goes to sleep?
And of course, you aren't being specific as to when this happens, so if you post back and say that this happens while you are using it ..... -
Auto locking the keyboard in curve 9300
Hello, i would like to know if there is a way, with the phone by itself or with any app, to auto lock the keyboard.
In any nokia phone (the old ones, not smartphones) you can set it to auto lock after X seconds you didnt use the phone. Thats what I need.
The thing is, i have the phone locked in my pocket. I recieve a call, I answer it, and when I finish, the phone stay unlocked. I forguet to lock it again, put in my pocket, and hell unleashes (phone calls, messages, and more without wanting).
So, I want my phone to lock itself after 15 sefonds in stand by. And to stay locked after i recieve a call.
Thanks in advance.Hey Mr elancio,
The device does not have a setting
to lock the key board automatically; you can set a security password to
lock the device, but you will need to use a password to unlock each time:
Go to Options> Password> Change the Password field to Enabled.
Set the Lock after time and check off allow out going calls while locked
I hope this helps.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on. So I know the speakers still work. I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting). My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't. I am super frustrated at this point. So any suggestions would be great. Am I missing something basic or do we just have a soundless iPad now?
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
My IPAD 3 [5.1.1 (9B206)] has a problem.
- It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
- It can no longer connect to the mobile network orange except Wireless (WIFI)Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Downloaded the app Top 100 Hits. Set the auto lock to "never". Sounds stops in 30 seconds. What can I do to correct this. MaNUAL DOESN'T EXPLAIN.
I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex -
While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?
Mike,
Thank you for taking the time to look at my app. This is my last major stumbling block that I have to resolve for this and other forms in the app.
Actually, I did use the Form Wizard for Auto DML to originally create the form. It was great. It created most of the Buttons, Items and Validations automatically (basically most of the page). I just needed to create some Processes and Computations. Two of which were the Processes to update the 'create_dt' and 'created_by' fields and 'update_dt' and 'updated_by' fields. The Create process updates the fields just fine.
However, my problem seems to be that the Hidden 'create_dt' and 'created_by' fields aren't picking up the values from a record that is being editted. Then when I attempt to save the record those fields are NULL, causing the DB NOT NULL constraint to throw an exception for those fields. In the back of my mind I seem to remember seeing some post stating something to the effect that the information in fields with a Source Type of Database Column is just displayed and does not affect Session State items.
Even with that, I am still wondering just why the 'created_by' Page Item shows the value that is in the DB record being updated, but the 'create_dt" does not (as can be seen in my first posting). It is the 'create_dt' Page Item (:P205_CREATE_DT) not having the DB records 'create_dt' info in it that appears to be the problem.
Thanks,
Tom -
Firefox is locking up VERY frequently after every few seconds unless I minimize the window and maximize it again. But then in a few seconds it locks up again, I am unable to click anything or DO anything and it is becoming extremely annoying! Ya'll just released a new version that I'd hoped would have fixed this issue, apparently not...and I also can't select an option in a drop down box, I have to use my keyboard to do so...
== This happened ==
Every time Firefox openedYeah I'm seeing this as well. A force quit and relaunch seems to solve the problem for a while.
IMHO the app has just gone downhill in the last few years. Useful tools like browser history from the back button are hidden / rendered useless (click and hold doesn't work so well from a track pad), and it's performance just isn't what it used to be. -
My iPad keeps locking itself every few seconds, any ideas how to fix it... Drives me crazy as the screen keeps going blank and I have to constantly put in my pass code every few seconds. Can someone help me out please. The pass code lock is set at 10 minutes but it's happening every few seconds :(
I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
I've solved it in the following manner(s):
1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
3) Perform any software updates
I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
Enjoy. -
Auto lock makes you unlock phone every time?
So if you turn auto lock off, the backlight never goes off, burning your battery. If you use any other setting (1-5 mins), you have to unlock your phone EVERY time you use it or receive a message? Really? Is this correct? This most aggravating and I find it hard to believe there is no way to turn auto lock off and still have the backlight operate normally, i.e. turn off after use.
"So if you turn auto lock off, the backlight never goes off, burning your battery"
Correct.
" If you use any other setting (1-5 mins), you have to unlock your phone EVERY time you use it or receive a message"
Correct.
" Really?"
Yes.
"Is this correct?"
Again, yes.
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf -
Netctl-auto fails every second boot
So, since about two oder three days ago, my netctl-auto fails every second boot and I can't even enable a profile manually.
I already found this thread: https://bbs.archlinux.org/viewtopic.php?pid=1275755
But I checked and don't have any failed units and dhcpcd is not running.
I will do some further investigation and post it here. Any ideas for solutions are welcome
WolleI've been having the same problem as well, it boots up just fine then after a reboot netctl-auto fails which had been going on for me for the past 30 minutes without "fixing" itself.
After I added the line:
TimeoutDHCP=30
to my profile then rebooted, it worked. It could be a fluke "fix" but worth a try. I *think* the reason it worked is that the default timeout is 10 seconds which might not be enough to establish a connection for some routers/network cards.
EDIT: I did another boot to see if it was a fluke, and it was. I'm getting a little tired of netctl-auto... I'm going to just disable it and manually do a "netctl start <profile>" after I boot up.
Last edited by DukeH (2013-07-16 19:07:58) -
String of bad luck, caps lock is flashing once every few seconds
So lets start off with the beginning of the bad luck, first i was watching a youtube video and deicided to go make a snack b/c i was hungry, when i came back my compuuter had shut itself off, overheating wasnt uncommon so i checked the how hot the computer was over the processor and it was coo and not hot at all, so i turned it back on, and i didnt get a thermal shutdown message, so i was a little confused and started checking for the error, the first thing was the power, in which it said "9% availiable(plugged in, not charging)" so i first made sure it was plugged in and everything a bit confused, still did it, and then i googled it, and apparently i had to uninstall the apci from device manager, so i did the ~11 step solution that had helpe so many people, and then it still was like that, so then i used the HP assistant to check my battery, and i needed to replace it, but on the way i noticed i had "system updates" and such i was bummed i had to get a new battery(To put it simply, im poor) and decided to update my system at the very least, maybe the HP assistant was wrong and after the update the battery would register as good again, with little hopes on that(i knew that the chance was near 0%) i updated, and one of the updates were BIOS updates, so half way through downloading my sister decided to power-cycle our router, as our router is a pretty bad router and every now and then our internet would slow to the point of pretty much being non-existant, so then my computer resets i get a black screen and capslock starts blinking twice, i use my issters computer to google it, my BIOS is corrupt, so i use windows + b + the power button, to try and restore my BIOS, during it flushing my computer overheats, and now when i turn it on its a black screen with the capslock blinking once every few seconds, i havnt been able to find a fix, can anyone help me? also i should mention the tag on my HP is worn out pretty bad i can barely salvage any info off it which is pretty bad, all i know is that its an hp pavilion G4 with AMD radeon GPHX, and 8mb of memory
Hi ,
Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that you had experienced a series of issues, and now your laptop cannot start. Below is a link could help you to diagnose the problem of your laptopHP Notebook PCs - Computer Does not Start (Windows 7, Vista, XP) If the laptop could back to start, you could use this link to reload the BIOS. If you find out it is a hardware issue, please use the following link http://www.hp.com/contacthp to create a case for your issue, and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Let me know if you need any other assistance. Good luck, -
Iphone4 dozsn't start up just a buzz every 5 seconds on charge
The screen on my phone4 will not illuminate at all. When I plug the phone into a computer or the wall, it just keeps vibrating every 5 seconds. I have just replaced the front screen. Help
Take it to Apple and ask them to find out what has been damaged by the tea.
The longer you wait the worst the problems will get as the corrsion from the liquid continues to develop.
Allan -
IPhone 3G after iOS 4 does not wakes after Lock or auto lock.
Hi,
I have an iPhone 3G (not S), I upgraded it to iOS 4.0 on Tuesday June 22.
it took around 2-3 hours for the whole process, but it all workd out fine.
Now I have two issues, one major one minor.
Major issue:
Every time I lock my phone, by using the (sleep/wake button), or if the phone gets auto locked, and if I leave it for a minute or so. I cannot wake it up by pressing the Home menu button (the round button in front). The only way to bring it back to life is to hard boot the phone by pressing the sleep/wake button and the Home menu button together for 10 second. This boots the os back to life, takes around 1-2 minutes. While the phone is inactive, if I make a call to it, on the calling side I hear the ring tone, but the phone lies dead like a stone. So no incomingcalls or SMS, while the phone is in this state, and the caller thinks I am not picking it up.
So far I am avoiding problems by not locking the phone at all, but that is eating up my battery.
Minor problem: as many have mentioned earlier also, it has gone too slow. And a substantially short battery life, accompanied by unusual heating.
Tried restoring the phone using iTunes 9.2, I am hitting 1602 error there, so tried restoring in the "Recovery mode", it worked fine, but the problems persists.
Another thing I noticed was that I can never switch off the phone too.
Every time I press and hold the sleep/wake button and initiate the Power off mode, either of the two things happen.
1) The circular star loading animation starts, gets stuck a some point, and suddenly the phone boots back to life after some time.
2) The circular star animation continues, for hours, untill the phone runs out of battery and dies out itself.
So far I have'nt seen a clean shut down after the upgrade.
what to do....used
http://lifehacker.com/5572003/how-to-downgrade-your-iphone-3g%5Bs%5D-from-ios-4- to-ios-313
and downgraded to 3.1.3 and my iPhone 3G is usable again.
Maybe you are looking for
-
Is somebody can summarize the ways to print out PO, Invoice. As we know, ABAP: Report ,query,sartform, and adobe forms in Web Dynpro
-
How to download older updates in Software Update Service?
Hello, In our company, we have a mixture of Mac OS X 10.6.2, 10.6.3 and 10.6.4 servers. Due to proxy-restrictions, only one of these servers is able to download updates directly from Apple (this one has 10.6.4 installed). We have set up the Software
-
Hi all, I am new to SolMan......can you just brief about the components of solman, its functionalities and to what systems it can connect. Also what are the steps to connect solMan with other SAP Systems like BW,ECC..and do we have to create any RFC
-
Want to block Material component in PO.
Dear all, We set material status block for external procurement.And it working fine.It cannot allow to create Purchase Order with blocked material. But the problem is that system allow to create Subcontracting Purchase Order when we use this block ma
-
New to Mac, embarrassed to ask, but can I insert....
mini digital disks into my iMac or will they get stuck? Someone said I had to insert them into a drive that opens with a tray. iMac 20 Mac OS X (10.4.8) Mac Rules!!!