Auto-lock not working

I changed my autolock from 1 min. to 5 min. I timed it and waited and waited without touching or moving anything, but it never locked or went dim. Do I have to turn it off for the changes to take effect or is there something wrong?

OK...
Try a quick reset:
Hold the Sleep+home buttons until the Touch reboots to the Apple logo.
Ignore the prompt on the screen to shut down.
No data will be lost.
Does that help?

Similar Messages

Auto Lock not working when connected to Macbook

Ive had my ipod for about a week and I thought auto-lock was working even when the ipod is connected to my computer.
But I just realized that the auto-lock is not working when it is connected to the computer.
Is this normal?
Also when I set the brightness to the lowest setting, the screen slightly flickers intermittently.
Is this normal too?
Thanks

Do you have more than one IDM Server running in your environment? When you are debugging a WF on server A and the scheduler decides (usually after an approval step) to continue running the WF on server B, your debugger connecting to server A wouldnt stop at the breakpoint.
Can you make the debugger stop on e.g. the "start" or very first Activity in your wf? Right after launching it from the form.

IPhone 4S screen auto lock not working with Music Playback, while connected to the Computer via USB

Hello Everyone,
I have an iPhone 4S, updated to the latest version of iOS (7.1). Recently, I noticed that my iPhone's screen doesn't autolock automatically whenever it's connected via the sync cable to my Laptop Computer (A Dell Studio running Windows 8.1 Pro). This happens regardless of whether iTunes is running or not. Whenever the music playback is on, the screen just gets dimmed after a while (as it always does before the screen auto-lock triggers), and stays like that. However, when I stop music playback, the auto-lock work just fine.
I want to know, is this normal? I mean, is this the way it's supposed to be?
Thanks and Regards,
Rajat S.

ALSO, iTunes has been updated to iOS 12.0.1.

I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on. So I know the speakers still work. I have tried resetting all settings and made sure that my side switch was auto lock not auto mute.

I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on. So I know the speakers still work. I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting). My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't. I am super frustrated at this point. So any suggestions would be great. Am I missing something basic or do we just have a soundless iPad now?

http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

AUto attendant not working

Auto attendant not working .....
If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
Is there Option to set
Please press the extension which you want to Call ...
Eg: if i press 222 that time it should ring the 222 extension
Please help this is the first time i am working on this stuff
If i chnage the scrpt file then i can hear auto attendant not initiazlised.. please find the attched screen shot and back file for more details.
Best Regards
Shabeel

Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
Check also the Calling Seach Space
GW should be able to reach CTI Route Point and CTI ports partition.
If you try other extension it works fine?

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Auto brightness not working on iPhone 5?

On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
Anyone else have this problem of the auto brightness not working?

There is nothing wrong with the auto brightness.
When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
If you have the slider too high the brightness cant reduce because youre not letting it.
Set your brightness at about 25% and you'll see what I mean.

Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

Ipad2 - cover lock not working - can anybody help?

Ipad2 - cover lock not working - can anybody help?

Settings -> General -> iPad cover lock/unlock -> On
Try toggling this setting on then off. Are you sure the case you have has the magnets that are compatible with this feature. Also with the setting turned on you could try a Reset, hold down the Home and Sleep buttons at the same time for 10 seconds, the iPad will then perform a reset.

Ask for password after screen lock not working!?

Ask for password after screen lock not working? It used to work before mavericks, each time my computer display sleep I'm asked for the password immediately. Now it never asks for it?

From 2008 MacRumors discussion:
SOLUTION: Browse to Home>Library>Preferences and drag com.apple.systempreferences.plist to the desktop.
Caused by a corrupt user preferences file. On restart, you may find user settings have defaulted. Set up as desired.
Worked for me.

Auto Calculate not working in Locked Title.

I am in the process of upgrading from AW 5.0.4 to AW 6.2.9
Just as a matter of interest and also it may help some who suffer the "Autocalc on strike" bug.
I ran into the "Autocalc on strike" bug in two large spreadsheets when they were saved as AW 6. I use these spreadsheets continually from year to year to keep annual track of my business so they are important to me.
All of the many calculations and references updated automatically as data was entered, except those that were placed in the "Locked Title". These needed the manual "Calculate Now" command to force them to respond.
I tried the "save in AW 5 and save back into AW 6" trick but this did not work.
The solution that fixed both spreadsheets was to:
Quit AW 6
Open copies of the original AW 5 spreadsheets in AW 5.
Go to "Options" menu and uncheck "Lock Title position"
Save
Quit AW 5
Open and save the spreadsheets in AW 6 again.
The title can be locked again if desired.
Wonderful.... now I have my precious spreadsheets and database working perfectly in AW 6 and access to my many files produced over the last eight years, here's to another ten years of using Appleworks.

Looks like you are facing the issue mentioned in the below article.
Auto-Blend Layer masks are all black or all white
If so, revert back to PS CC as of now.
Here is the process, Creative Cloud Help | Install, update, or uninstall apps
~ Arpit

Screen locking up and auto rotation not working on phone wakeup

Since updating to iOS8 my iPhone 5 and 5s will lock up when waking the phone. I also have noticed that the screen rotation does not work riight away and is sluggish. Certain apps tend to freeze which could be that they need an update themselves. It is a shame that Apple has resorted to using its customers as beta testers for their software. As a die hard Apple fan it is getting harder to stay true to the company. Apple should be leading not playing catch up which is why I think theses major software issues develop.

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Auto-lock not working

Similar Messages

Maybe you are looking for