Auto Lock still enabling during sync

I have disabled the auto lock to never come on. I was initially getting errors during syncing about the drive not being able to be written to after a few songs. I adjusted all my power settings on the USB hubs on my pc and in the bios, to make sure they weren't auto disabling to save power.
Now I can get much more songs on it before the error, and every time the error occurs through iTunes, my device shows that it's locked again.
Like I said, I'm disabled this feature, changing the setting to "Never". I have powered down device and disconnected from PC, booting device back up and reconnecting, attempting sync again, and after many successful track transfers, it locks itself.

You can re-download purchased apps for free. Click on buy, click yes to I want to purchase, another popup will appear, you have already purchased, do you want to re-download, click yes.

Similar Messages

  • Why is my facetime app not on my iphone?just bought the app should it transfer auto to my iphone during sync?

    why is my facetime app not on my iphone?just bought the app should it transfer auto to my iphone during sync?

    There is no FaceTime app for the iPhone. Settings>Phone>FaceTime>On.
    http://support.apple.com/kb/ht4319

  • Removing Auto Lock from Nokia E71

    I downloaded an application to my Nokia E71 that required using the autolock function. I no longer need the application, and I have done a complete uninstall; however, when I try to remove the lock function by going to Menu > Tools > Settings > General > Security> Phone and SIM card > Phone autolock period and try to change the setting to None, I receive a message "Unable to unlock phone". Does anyone know another way I can try to remove the autolock feature?

    My issue was that I tested the installation on my E71 before trying it on the phone that needed the mail setup.
    I was not able to remove the auto lock, even after removing the mail information, and uninstalling the MfE.
    It was mentioned in the documentation for the mail setup (from my company), that this would occur. 
    It indicates for me that it is a security feature enabled from server side.  This means that every time you run the setup, you will get the auto lock feature enabled again. I have read earlier, that some phones has the ability to override this feature, N95 i think, and also the iPhone.
    Seems like the E71 does not have the possibility to override this feature (as i have found yet).
    Still looking for how to override the feature, will let you know when i find it....

  • Auto-lock is not working after last update

    After installing the newest IOS update the auto-lock features quit working. It was set to auto-lock after 5 minuets of inactivity, I have reset that to 2 minuets and it still does not auto-lock. If I forget to manually lock it after using it my battery runs down.
    About the same time that I did the IOS update I installed the Printer Pro app from the App Store. I have deleted this app from my IPAD but auto-lock still does not work.

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • My ipod touch is locked in expanded mode. It happens every time I do a itunes update. I've tried to soft reset then a hard reset. Neither has resolved the problem.  The screen goes back to normal but expands and locks during sync. help

    My ipod touch is locked in expanded mode. I can not get to the controls. It happens everytime I do an itunes update. I have tried a soft and a hard reset which fixes the problem but then during syncing the screen expands again and locks up. Help.

    tell me abt software version ...????
    was it jail break or not???
    reply these two and i will tell u further...

  • I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute.

    I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting).  My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't.  I am super frustrated at this point.  So any suggestions would be great.  Am I missing something basic or do we just have a soundless iPad now?

    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • Hi, My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    Hi,
    My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    While connected to iTunes, try...
    http://support.apple.com/kb/HT1808

  • After updating my iphone3gs and ipod touch 4g to ios 6, the auto lock fuction doesn't work always , especially if passbook is left open in the background! i have also restored both the devices but the problem still persists and is affecting the battery li

    After updating my iphone3gs and ipod touch 4g to ios 6, the auto lock fuction doesn't work always , especially if passbook is left open in the background!
    i have also restored both the devices but the problem still persists and is affecting the battery life!

    Same problem here, after istalling ios 6 on my iphone 4s my auto lock didnt work, but when i closed my assistive touch it worked again..I didnt have this problem in the 5.1.1 version. I dont wanna close the assistive touch tough....annoying problem !!!
    Another problem occured in the settings of alarm clock. The sensivity of the on-off button is not as good as in the 5.1.1 version...
    Hope they will fix this problem soon !!!
    Is there anyone else who hava the same problems??
    Best regards...

  • Ipad wont auto lock occasionally n then lights will b still on even on standby..any1 facing the same problem?

    When i am done using my ipad2 ,the lights will still be on after the 2 mins auto lock time i set.this drains out the batt quickly n it does nit auto lock ocassionally...
    HELP..

    I got this problem too.
    The screen is totally black. You can see it " black-dim " when you turn it Off & On.
    You can ear the email tones when I receive an email.
    So it's definitvly working ... just show's a balck screen.
    So here's what I did (don't get your hope's up .. I'm still stuck).
    1- I tried to put it on recovery mode. It does ... but I can't see the usuall iTunes and connector image, I still get a  black screen.
    2- Rebooted it from recovery, still black
    3- Did a full Restore, still black
    Now it's totally empty and still the same black screen.
    Any ideas ?

  • HT1430 My phone locked up during sync to I tunes,   Power button and sleep/wake don't work

    My  phone locked up during sync to I tunes,  Power button and sleep/wake don't work.

    We here http://support.apple.com/kb/HT1808 and here http://support.apple.com/kb/ht4097

  • My iTunes locks during sync.

    My iTunes locks during sync. I am using Windows 7 and iPhone 4s. It almost completes and says "Waiting to copy." I forcibly end iTunes and open again with the same locking problem. I used another cable and the same thing.
    Any suggestions?
    [email protected]

    Check out this thread -> Syncing stays on 'waiting for items to copy' with iOS 5
    Some people in that thread suggest unchecking "Include voice memos," just click the iPhone on the left side of iTunes, click Music across the top, then you'll see the voice memo option.
    You may also want to check out this article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store

  • Crash during sync, now all my apps are gone.

    My laptop and iphone crashed during a sync. Laptop would lock up as soon as the phone was plugged in, and the phone started random reboots and freezes.
    I reinstalled WinXP and itunes on the laptop, but still could not sync. The phone would come up "sync in progress", but then nothing happened. Left it sit overnight, and sync still would never complete.
    Restored the phone to factory settings, and now everything seems fine. Only problem is that all of my downloaded apps are gone. I can see the history where I purchased them in the itunes store but they are not in itunes. If I try to reload them it wants me to pay for them again. Is there any way to recover previously purchased apps?

    You can re-download purchased apps for free. Click on buy, click yes to I want to purchase, another popup will appear, you have already purchased, do you want to re-download, click yes.

  • Quick question about Auto-lock settings

    Hello all,
    I recently was able to sync my office email account to my iPhone using Microsoft Exchance active sync. The problem as I understand from searching through different posts, is that I can no longer set my Auto-lock setting to "Never" because of this, only 5 minutes (sort of a security thing as far as I can tell).
    The reason I am trying to do this is that I like to use one or two of the GPS golf apps out there, and they stay dialed in if the phone doesn't "sleep" while I am playing a round, so I would like to keep it on the entire time.
    Does anyone have any ideas of how I might be able to work around this issue in any way?
    Responses are, as always, much appreciated!
    Cheers,
    Kev

    More than likely, you could not simply delete the account. The thing is that the people who came up with the security protocols already thought of that. As an employee using a company cell phone, I could delete my account, access features or information my company restricts and then readd the account, thus bypassing security protocols.
    In addition, I might have other sensitive company information (in the form of contacts, documents, notes, etc) that would still be on the phone even if I delete my exchange account. Without autolock, people would still have access to this data even if I delete the account.
    To prevent this type of abuse, when an exchange account is added, it installs a set of restrictions and protocols to the phone. Those protocols can, at the discretion of IT, be non alterable and non removable, even when the exchange account is deleted. This prevents people from abusing the loophole you are describing.
    Similarly, simply switching to another email account will not bypass them - these protocols are now part of how your phone acts and can not be changed without wiping it back to factory settings.

  • HT4623 iOS 6 auto-lock problem

    Since I have updated my iPhone 4 to iOS 6, the auto-lock button doesnt work anymore.
    In addition, after pushing the button, my iPhone starts to oscillate between the "power off" and "unlock" pages.
    The same behavior happens also during the execution of different applications after a few seconds.
    Under thes conditions, my iPhone is now unusable.
    No clear for me how to step back to iOS 5 until this bug is fixed by Apple.

    I use assitive touch as well but not because I need assistance. Some things I just find quicker to do by using it.
    Since updating my iPhone 4 (not S) to iOS 6 yesterday (OTA), I'm also experiencing Auto-Lock not working 100% of the time. I've always had the auto-lock time set to it's 2 minute default and under 5.1.1, it has *always* auto-locked. Then today, I put the phone down for about 30 minutes after a brief use. I came back to the phone to find the screen still on with the battery level dropped as well cause of it. I had NO additional apps running...
    I am experimenting now and it *seems* that if auto-lock is set to 1 minute, it will auto-lock correctly. It may be that the 2 minute setting is what's causing the issue. As I said, I'm still testing this, again with no additional apps running in my testing...stay tuned.

  • FCP7 Auto Locking Music Track

    Is there any one out there that could help me out. I edit weddings and as part of the edit I usually lay down a few songs to my timeline. In order to edit to the beat of the song I usually mark the aif in FCP and then drag it to my timeline. The problem I am having is that any song that I mark on all beats or every other beat (like a dance track) and then drag into my timeline gets auto locked for some reason and when I go to move it in my timeline the time code next to the cursor is XX:XX;XX. Any help would be much appreciated.
    By the way I have already tried trashing my prefs, restarting, fully uninstalling and re-installing FC Studio to no avail.
    Here is a screenshot to sort of help out: http://gallery.me.com/chad.vegas#100142

    I clicked the "toggle sync lock" (if that's what you mean), but it still allows me to bring other files into the timeline & overwrite it (the main audio file).  Unless that's not what you meant..

Maybe you are looking for

  • 'AND' Conditional operator in smartform

    Hi experts, I have  to use AND condition in smartform (text). For OR condition there is a standard icon sothat can use. But how can we get AND contion in smartform. if I am giving AND condition it is showing error I have tries in SDN before posting m

  • P12 Certificate and Developer/Distribution Viewer Issue

    Two Problems: Problem 1: In Viewer Builder when I go to test my app in Developer Viewer my P12 Certificate works but in Distribution Viewer it gives me the error "not finding expected label 'iPhone Distribution' in this certificate" I understand this

  • Crystal Reports "Unknown Source" Stack Trace after report generation

    Getting java.lang.NullPointerException with Crystal ReportViewer.W(UnKnown Source)  stack trace...  java.lang.NullPointerException at com.crystaldecisions.report.web.viewer.CrystalReportViewer.goto(Unknown Source) at com.crystaldecisions.report.web.S

  • How do I deauthorize computers I no longer have access to?

    My hard drive crashed on my laptop so I put a new hard drive and installed a new OS so I was unable to deauthorize the computer. Since then I upgraded from Vista to Windows 7 and forgot to deauthorize. Now iTunes is counting that one computer as 3 se

  • Compile LINK image into one folder

    Hola peeps, Normally what i did after client approved Final Artwork i have to open one by one by click option + double clik the link image. is there any command or action that i dont know off to compile all the LINK file by one click and save it in o