Auto Lock/Unlock is not working when the iPad cover is closed or opened for iPad 4 with retina display after upgrading to ios7.

As the title above, is there any solutions for that? I tried restarting my Ipad and i've double checked the auto lock/unlock button is on.

I have the same problem also. Restarting isn't helping and the auto lock/unlock button is on. Plus a couple of time when I turn it on it is asking if I want to power off. That is when I push the button on the front to wake it up. Not the power button on top. I have an IPAd 2. Worked fine before the update.

Similar Messages

The auto lock function is not working on the iphone 3gs running ios 6...what should i do?

the auto lock function is not working on the iphone 3gs running ios 6...what should i do?

Temporary fix - turn off assistive touch if you happen to have it on.

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

The quality of built-in camera on macbook pro with retina display is far worse than any other mac. Why?

I just got the new macbook pro with retina display like a week ago and I've been noticing that the quality of the built-in camera on it is so bad.
It's even worse than my 2009 iMac or my sister's 2012 13" macbook pro. I don't get why this is a facetime HD built-in camera when i can obviously see that is not even near HD. Or is it just my computer. Do i have to bring it to the apple store??

it's advertised 720p so yes it is the same as all the other MBP. it may just be the resolution of your monitor is stretching the pixels. Don't worry about bringing it to the apple store.

I am using iPhone 5s 32gb . Since yesterday auto lock feature is not working ( I have set it to 1 minute ) and occasionally a blue band has startedappearing horizontally on the screen and moves across the screen

Someone please tell the solution .
Is it a hardware issue or os

I have the same problem, only my lines are red. I just bought a 52 16GB to replace my iPhone 4. The old phone started having the red lines moving back and forth, and I looked on some of the forums, and was led to believe that it meant the phone was dying. Since I've had it for a long time, and it was real slow, I thought getting a new phone would be the solution. But wouldn't you know it, after a week or so, the red lines started showing up on the 5s. And now the auto-lock doesn't, and I keep running the battery down because I forget to manually lock it. The red lines make me think there's a virus, since it migrated to the new phone. As to the auto-lock, I have no idea.
Any help would be really appreciated. I had to select a reply option, so I replied to the original post, but I'm hoping someone out there has a solution.
Thanks!

Rollback is not working when "The server threw an exception" error

Hi
These are my transaction steps
1) Call the StartTransaction method of the company object (Function AA)
2) Add Goods Issue (Rollback if error occurs) (Function BB)
3) Create record with oRecordSet object (Rollback if error occurs) (Function BB)
4) Add Journal Entry (Rollback if error occurs) (Function CC)
5) Add Goods Receipt (Rollback if error occurs) (Function DD)
6) Create record with oRecordSet object (Rollback if error occurs) (Function DD)
7) Call EndTransaction (with commit) to complete the whole process (Function AA)
These are working fine usually.
But problem is when user has "The server threw exception" error message.
Whole transaction must be rollback but still step 2 and 3 records are exist on DB.
Rollback is working fine with another error messages.
I programmed call Rollback transaction if calling function has any error.
Function BB, CC and DD are calling from Function AA.
I never have "The server threw an exception" error on my development machine with B1 2005 PL 51.
This is happened only LIVE server with B1 2005 PL 51.
B1 was upgraded from PL29 to PL51 recently becaseu of Locking issue.
Then Locking issue was solved but have "The server threw an exception" error and rollback is not working properly.
I hope someone can help me!!!!.
Thank you
2) & 3) steps

Hi Joanne,
There are 2 things to check here.
1. is the Transaction
2. is the RPC_E_SERVERFAULT.
for the first one,
in step 2, just before you add the Good Issue, can you try to check first if you are still in a transaction ?
Just to make sure.
If it is, maybe you should open a ticket to SAP support.
BTW, Which version is your Live environment ?
for the second one,
try to search the error in this forum. there is a lot of posting about this.
The problem might also go away if you upgraded your SBO.
Please search and see if there is anything the same with your problem.
Regards
Edy

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

Cascading LOV not working when the page is public

Hi ,
I have a cascading LOV in a tabular form which I have built using Denes Kubicek example from
http://apex.oracle.com/pls/otn/f?p=31517:176:2702932664861989:::::
Thanks to this wonderful examle I was able to make my cascading lov work.
However when I make the page public , the second lov(which is based on the first one) does not work.
Inorder to debug i changed get.get('XML') to get.get() and put an alert on it; to check if the select list string is being returned correctly by the application process - it returns null. The same alert returns the select list string when I put the authentication back on the page.
Also I noticed when the page is public the application item (TAB_CASCADING_ITEM) is not getting populated with the value of the first select list.
has anybody encountered the same issue ?
Appreciate any suggestions?
Thanks,
Dippy

One of the parameters in the htmldb_get is the page the process runs on. You should change that to the current page or make page 0 public as well.

Vertical Elasticity on Field is not working when the data contains - in it.

Hi,
I have a report which has to print a large invoice number(around 30 characters) per invoice line, but I got only space for 12-14 characters, so I have set the vertical elasticity property of the field to Expand which makes the data to wrap to the next line.
But if the data contains any '-' character in it, the data wraps to the next line even though there is enough space on the current line.
Sample outputs:
When the vertical elasticity is set to Expand
<p>
Invoice Number Invoice Description
123456789023 First Invoice on first line
345678957694
347634763476
12345678-     Second Invoice but the number gets wrapped because of the hyphen
345734573476
569456573456
When the vertical elasticity is set to Fixed
Invoice Number Invoice Description
123456789023 First Invoice on first line
12345678-345     Second Invoice but the number does not get wrapped after hyphen
</p>
Is it a bug on reports editor, how do I avoid this?
I would like to see the output like the following,
Invoice Number Invoice Description
123456789023 First Invoice on first line
345678957694
347634763476
12345678-345     Second Invoice number with correct format.
734573476569
456573456
PS: The version of the Report Builder is 10.1.2.0.2
Thanks in Advance,
Senthil

It looks as if the logic that Oracle Reports uses to determine where to break the line is interpreting the "-" character differently from other characters. This is probably because it is used (at least in English) to break words at the end of a line (see http://en.wikipedia.org/wiki/Hyphen#Justification_and_line-wrapping).
One workaround might be to replace "-" character with another character (or more) that looks the same (or similar), but that Oracle Reports does not interpret differently from other characters. For me (on Windows), CHR(173) seems to work. However, whether or not it works for you will depend on whatever character set(s) you're using. The same goes for the Unicode characters like U+2010 (hyphen), U+2011 (non-breaking hyphen), and U+2212 (minus).
For example, in your data model, you might try replacing your current invoice number column with an expression that looks something like this:
REPLACE(YOUR_INVOICE_NUMBER_COLUMN, '-', CHR(173))
Hope this helps.

LED for accessibility notifications does not work when the flash is turned off for the camera, LED for accessibility notifications does not work when the flash is turned off for the camera

I use the LED notifications and the notifications weren't working. I found out when I had the flash off in the camera app, my LED notifications did not work.

OK... so turn it on?

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

Safari web browser not working when the iPad is upgraded to ios 4.2

I have just upgraded my ipad 1 to ios 4.2. Now my safari browser will not stay on selected website...it just takes me back to the desktop menus. It worked perfectly before. If possible I will go back to original setting...but how?

Tap Settings / Safari. Clear the History, Cookies, and Cache.
Restart your iPad.
Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.

Webutil_host.blocking is not working when an existing Chrome browser is already open

Hi Everyone,
I've a small issue which I would like to share with you and hopefully you might have come across this problems before and assist me to resolve it.
The problem is I'm using Oracle Forms [32 Bit] Version 11.1.2.0.0 (Production) version and in one of the Form's button I'm calling an external API to display the image in a Chrome browser and once it completes, it would return control back to the Oracle Form. In the ideal situation where there isn't any existing Chrome browser opened, the logic would work perfectly as I was using the webutil_host.blocking command that block Form processing until the Chrome browser is terminated. However, as soon as I have one or more existing Chrome browsers open, I was still able to call the external API to display the image but the locking or blocking of the Oracle Form would not work. By the way, all clients accessing the oracle Forms are using Window 7. Is that a solution for that? Is that a Chrome, OS or/and WebUtil issue? Thank you for your assistance and time.
Regards,
John

Hello,
does anyone have any thoughts on this or a workaround?
We use the blocking feature to allow the user to make changes to the document and then restore those changes to the database. Without this feature the code falls through and breaks the link between the document and the forms application.
appreciate all help
Jim

My microphone is not working on the sound test or on skype HPPaviliondv7notebookPC with Windows 7

My microphone is not working on sound check and when I try skype. I am using HPPaviliondv7notebookPC

Hey guys, it's now working.
If you have the same problem you can find de solution here :
http://laptopforums.toshiba.com/t5/Sound-Audio/Possibly-found-fix-for-internal-microphone-issue-in-W...

TS3899 Why do I keep getting emails downloaded over and over again. It seems that iCloud does not recognize when the emails have already been downloaded to my iPad.

Why do I keep getting mails from iCloud over and over again? It seems that iCloud does not recognize that the emails were previously downloaded.

Does the iPhone NOT tell iTunes if you've played a track or not?
Yes, but the entire track must be listened to - until the track ends.
A song is not marked as played until the song has completed and the iPod starts playing the next song. The song must be played until the very end, and the same with a podcast.

Auto Lock/Unlock is not working when the iPad cover is closed or opened for iPad 4 with retina display after upgrading to ios7.

Similar Messages

Maybe you are looking for