Auto Login Error

So I downloaded from the Microsoft site an auto log in file that way I wouldn't have to enter a password in for 8.1. Had I known that upgrading to 8.1 would force me to input a password then I would not have bothered with the irritant. Thing is something
went wrong and now I have two profiles on my computer. The second profile that I see when I turn my computer on doesn't actually seem to exist in any way other than showing up when I go to log into the real profile. It asks for a password and has a line of
things already typed into the username/email address area but if I attempt to type a password in then nothing happens other than it telling me that I have the wrong password. I can't delete this account/profile with the main profile as it doesn't show up at
all. This is honestly annoying and unnecessary. I see no need for why I need to password protect my own computer when I am the only one that uses it nor do I see the need to give Microsoft my email.
Is there a way to get rid of this nonexistent profile/account without restarting my entire computer to factory conditions? That is not possible for me to do at this time.

I don't know how to undo the mess you've made, but I can tell that you don't need to download anything to have your Windows 8.1 system log you in automatically at bootup.
Just run netplwiz (a Microsoft utility that comes with Windows) and uncheck the [ ] Users must enter a user name and password to use this computer
checkbox. You'll have to enter your password, then from that point on it will auto-log you on at bootup. Make sure you have good physical security if you do this.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Similar Messages

Problems joining Wi-Fi networks that require viewing a redirect page in iOS 8.1.1? Check your "Auto-Login" setting.

Are you having problems joining previously used Wi-Fi networks that require you to view a login or redirect page (say to accept Terms of Use) first? The problem could be your Auto-Login Wi-Fi network setting.
I found numerous cases where I could not access in-store Wi-Fi networks (Nordstrom was one), hotel networks or in fact networks where you had to first view a Terms and Conditions page or where you had to login via a web form.
These were all networks I had used before.
This appears to be due to the "Auto-Login" setting assuming that once you (re)join a previously known network you can just go ahead and use it without further action. When the iOS device receives an error trying to use the network, it silently drops the Wi-Fi association.
If this is happening to you, follow these steps:
1) Go to Settings -> Wi-Fi
2) Select the network you want to join
3) When a check-mark appears next to the SSID, press the "i" button on the right hand side
4) Set Auto-Join however you want, but shut off the Auto-Login switch
5) Now attempt to use the network and you should be presented with the usual redirect page with terms you must accept or where you must login to use the Wi-Fi network in question
This cleared up the issue for me everywhere I had previously been having issues.

Just let me get one thing straight...you don't change don't do this for the PC you have your router plugged in to?
"For Vista:
1. Open Control Panel, Network and Internet, Network and Sharing Center, Manage Network Connections
2. If Wireless, Right click on your Wireless Network Connection, otherwise, Right click on Local Area Connection and click Properties
3. Highlight Internet Protocol Version 4(TCP/IPv4)
4. Click Properties
5. Tick Use the Following IP Address and enter the IP you want to use for that PC. I would start at 192.168.0.100(D-Link) and work your way up on each additional device. The second device would be 192.168.0.101, the 3rd, 192.168.0.102 and so on. Like I said, different brands of routers use different IP's, so it could be 192.168.1.100 and so on, so you will need to know the IP address of your router first.
6. Subnet Mask is 255.255.255.0 on all pc's and devices
7. Default Gateway is 192.168.0.1(D-Link) or whatever your router's IP is on all pc's and devices
8. Tick Use the Following DNS Server Address and enter 192.168.0.1(D-Link) or whatever your router's IP is and click OK.
9. You will need to do this on all Vista Pc's"

I can't login from the desktop app - "Login error. Please contact the Admin."

1) Does anyone have the same problem as described below?
2) Does anyone know how to fix it?
When I try to "work online" from the desktop app, I get asked to log out of offline, then log into online. When I put in my username and password, it gives me the error "Login error. Please contact the Admin." I've clicked the link "Trouble logging in?" and followed instructions to reset my password, which I successfully reset to a new one. I still get the error.
I have a subscription to Adobe Story Plus and am working offline/online using the desktop app. I haven't logged in to sync my documents in about a month. My account is in good standing (paid 2 weeks ago according to my account transactions screen). I'm now trying to collaborate, so it's important that I be able to sync.
Any help would be greatly appreciated.
Thanks,
John

Hi Rohit,
Thanks for your response. I've resolved the problem myself, and you may be
interested to know how in case it happens again with another user - I
thought maybe it was a versioning discrepancy and I was right (I assume).
However, I couldn't update my desktop software (or I couldn't figure out
how to update it) until I rebooted my machine, then Story went into an
auto-update sequence.
After it updated, it logged in and sync'd just fine. Classic "help"
question where the answer basically was: reboot. I shouldn't tried that
before I posted!
I hope that helps.
Thanks,
John
On Mon, Jun 16, 2014 at 3:02 PM, Rohit (Story Team) <

Auto login issues to iTunes Store password incorrect

Running Windows 7 with iTunes 11. When I open iTunes and it attempts to auto login I get an error message that my password is incorrect (see image below). I can type in the correct password and everything works fine until I close iTunes and reopen it, then I get the same error. Steps I have tried to resolve issue: 1) Logged out of iTunes, 2) deauthorized this computer and reauthorized it, 3) Reset warnings and cache. All to no avail.

When you change your USER ID (which is generally your E-MAIL), Itunes for some reason gets confused... Any apps, music etc. purchased off the itunes store before you made the change still bring up the original USER ID to update, authorize etc. So if you try and enter the password without changing to the new user ID, even if the account is technically the same, you're going to get "incorrect password" or "can not connect to itunes" or possibly "account doesn't exist". I found this out the hard way when I upgraded from XP to Windoze 7.
Message was edited by: jacksTLOS

Auto login cwallet requires password

I created a cwallet with orapki and auto_login using putty. OHS startall fails with error
Cannot open an encrypted wallet file (wallet location) while process is managed by OPMN. Enable it as SSO wallet
On reading up furthur, I found that Enable it as SSO wallet means that the wallet requires a password. I had checked the auto login checkbox when the cwallet was created using OWM.
To confirm that password was the issue, I tried opening the cwallet using the command
orapki wallet display -wallet wallet_location
The command did request for password.
Even though i had checked the auto login option why has the display of the cwallet requested for password.
(FYI - cwallet was created from ewalllet.p12, ewallet opens fine with the oraclepki command after i provide the ewallet password. Hence there are no issues with my ewallet.p12 file)
Can this issue be environment related.
Thanks in advance for the help.
Edited by: 929837 on Oct 17, 2012 12:08 PM
Edited by: 929837 on Oct 19, 2012 3:44 AM
Edited by: 929837 on Nov 19, 2012 1:28 AM
Edited by: 929837 on Nov 19, 2012 1:29 AM

User i had used to access OWM, to save the wallet, to get the cwallet is the same user who has access to all the folders in the installation.
After closing the wallet manager i immediately try opening the generated cwallet file with orapki display command with the same user id, yet it requests for password.

Auto Login With Request Parameters

Hello
I am working on a test JSF application in NetBeans 5.5 using the visual web pack. Currently there are only two pages in the app, a login page and a main page.
I am trying to figure out how I could set up an auto login to a JSF based web app. I would like the app to be able to take username and password parameters on the URL and automatically attempt to log into the app with those values. When the URL contains these parameters and they're valid, instead of displaying the login page, it would start up with the main page displayed. If the paramters were not present or invalid, the login page would be displayed.
I've read about how to pull request parameter values into from a JSP page, but I don't think that would helpful for this case. I have instances of ApplicationBean, SessionBean and RequestBean in the project. I'm wondering if any of these would be the appropriate place to add some code to check for the parameters, attempt to login and display the correct page based on the login result.
And advice greatly appreciated.
Shelli

I'll be so kind to share a basic example I've been playing with a while ago :)
public class UserFilter implements javax.servlet.Filter {
    @SuppressWarnings("unused")
    private FilterConfig filterConfig;
    public void init(FilterConfig filterConfig) {
        this.filterConfig = filterConfig;
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
        throws IOException, ServletException
        // Check PathInfo.
        HttpServletRequest httpRequest = (HttpServletRequest) request;
        String pathInfo = StringX.trim(httpRequest.getRequestURI(), httpRequest.getContextPath());
        if (pathInfo.indexOf(PATH_INC + "/") == 0 || pathInfo.indexOf(MAIN_JSF) == 0) {
            // If include files are loaded (subviews, images, css, js) or if unfriendly URL is
            // requested somehow, then continue the chain and abort this filter. In case of
            // unfriendly URL's, the next filter in the chain is the FriendlyUrlFilter which
            // translates the URL and will redirect back to this filter.
            chain.doFilter(request, response);
            return;
        // Get UserSession from HttpSession.
        HttpSession session = httpRequest.getSession();
        UserSession userSession = (UserSession) session.getAttribute(SESSION_ID);
        if (userSession == null) {
            // No UserSession found in HttpSession; lookup SessionId in cookie.
            String sessionId = Context.getCookieValue(httpRequest, COOKIE_ID);
            if (sessionId != null) {
                // SessionId found in cookie; lookup UserSession by SessionId in database.
                userSession = new UserSession();
                userSession.setSessionId(sessionId);
                LoadQuery<UserSession> loadQuery = new LoadQuery<UserSession>(userSession);
                try {
                    Dao.execute(loadQuery);
                    userSession = loadQuery.getOne(); // This can be null.
                    // If this is null, then session is just deleted from DB or the cookie is fake.
                    Logger.info("Loading usersession succeed: " + userSession);
                } catch (DaoException e) {
                    Logger.error("Loading usersession failed.", e);
            if (userSession == null) { // loadQuery.getOne() can return null.
                // No SessionId found in cookie, or no UserSession found in DB; create new UserSession.
                sessionId = StringX.getUniqueID();
                userSession = new UserSession(sessionId);
                try {
                    Dao.execute(new SaveQuery<UserSession>(userSession));
                    Logger.info("Creating usersession succeed:" + userSession);
                } catch (DaoException e) {
                    Logger.error("Creating usersession failed.", e);
                // Put SessionId in cookie.
                HttpServletResponse httpResponse = (HttpServletResponse) response;
                Context.setCookieValue(httpResponse, COOKIE_ID, sessionId);
            // Set UserSession in current HttpSession.
            session.setAttribute(SESSION_ID, userSession);
        // Add hit and update UserSession.
        userSession.addHit();
        try {
            Dao.execute(new SaveQuery<UserSession>(userSession));
            Logger.info("Updating usersession succeed:" + userSession);
        } catch (DaoException e) {
            Logger.error("Updating usersession failed.", e);
        // Continue filtering.
        chain.doFilter(request, response);
    public void destroy() {
        this.filterConfig = null;
}By the way, the 'User' DTO is wrapped in the UserSession which can be retrieved in the backing bean by:
public User getUser() {
    return ((UserSession) Context.getSessionAttribute(SESSION_ID)).getUser();
}If the User is not logged in, then this is null. If the user is logged in, then put the User in the UserSession object.

Auto login problem in Discoverer -- Urgent Help

Hi All,
I'm trying to call discoverer 4i plus from viewer.
I did auto login for discoverer 4i plus for 9i AS(2.1).It worked
fine. I did the same for 9i AS(2.2).Basically i tried to get
login inforamtion from cookies in webdisc.js file .The edited
webdisc.js like this
var user = getCookie ("Username");
If i remove this line my discoverer 4i plus works fine without
having any problem.if add the above code then i get the
following error
"Unable to connect to the Oracle Discoverer Application server.
Failed to connect to session XXXOracleDiscovererSession4 using
OSAgent."
Any help please..
Thanks in advance,
Sapna

Hi Jerome ,
Thanks for the reply.
I installed 9iAS(2.2) on NT. clint is on WIN2000.
Are u using cookies?
In my viewer, i've provided a link to plus. When an user hit
this link it should take the userid from viewer and auto logins
to plus. In viewer, i'm putting the userid and password in a
cookie and reads the information from cookie in webdisc.js(This
is disco plus script file for auto login)
I did the whole process in 9iAS(2.1) it works fine. Only this
version(2.2) i'm getting the error
"Unable to connect to the Oracle Discoverer Application server.
Failed to connect to session XXXOracleDiscovererSession4 using
OSAgent."
I'm interested to know how u did auto login on NT using <PARAM>
tag.
Best Regards,
Sapna

Disabling Auto-Login Option

How do we disable Auto-Login option in OBPM 10GR3 because I get the following error:-
You have the autologin option enabled and the session for this execution has expired .

So nobody else has been bitten by this stupid bug?
Anyway, it happens on a pure VGA console too, so it has nothing to do with the video driver. And I take back the “more of an inconvenience” part – it is freaking annoying that one can not just properly change the runlevel. Oh well…

Cisco CIM 4.3.2: Webchat auto login

Dear all,
I try to use the auto login in on chat function for customer page.
I did enable auto login option to YES on entry point config.
Document says to change the HTML code to this format
('http://MY SERVER NAME/system/LiveCustomerServlet.egain?eglvcmd=CustEntry&entryPoin
tName=Default
EntryPoint&eglvepid=1003&departmentid=1002&eglvpartid=1&referer='+refererurl+'&
eglvrefname='+refererName&fieldname_1=Name&fieldname_2=EmailID&fieldname_3=Phone-
number,'',params)
I know Name, EmailID and Phonenumber, I need to transfer from variables on my web session butI try to replace Name, EmailID and Phonenumber with static string for testing.
I tried this thing but unsuccessful.
('http://MY SERVER NAME/system/LiveCustomerServlet.egain?eglvcmd=CustEntry&entryPoin
tName=Default
EntryPoint&eglvepid=1003&departmentid=1002&eglvpartid=1&referer='+refererurl+'&
eglvrefname='+refererName&fieldname_1=Thanh&fieldname_2=[email protected]&fieldname_3=12345,'',params)
Can anyone help me on this? Any syntax error with my web link?
Thank you,
Thanh

This can be achieved through customization, but when no agents are available when clicking on chat a message will show that no agents are available.

How to configure LDAP SSL using auto login wallet?

Hello,
I need to enable authentication over LDAP SSL.
I've configured a wallet (auto login) containing required certificates and set accordingly WALLET_PATH and WALLET_PWD settings using apex_instance_admin.set_parameter method.
With this, everything is working fine and LDAP over SSL is working well. It confirms that the wallet is properly configured, valid and usable.
So, the wallet was created with auto login option and it seems to work well without specifying password when calling utl_http.
Proof of properly configured auto login wallet (without password).
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- test without wallet
BEGIN show_html_from_url('https://www.verisign.com/'); END;
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1527
ORA-29261: bad argument
ORA-06512: at "TEST01.SHOW_HTML_FROM_URL", line 25
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-29024: Certificate validation failure
ORA-06512: at line 1TEST01@DB11G> exec utl_http.set_wallet('file:/u01/app/oracle/product/11.2.0/dbhome_1/network/admin'); -- set wallet info for use without password (autologin)
PL/SQL procedure successfully completed.
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- It works!
PL/SQL procedure successfully completed.
So, when I configure WALLET_PATH without WALLET_PWD, it not seems to work as it should with my auto login wallet...
What am I missing? Is it APEX not handling auto login wallets correctly?
Apex Version: 4.2.0.00.27
OS: OEL 6.4
DB: 11.2.0.3 x64
Thanks
Bruno Lavoie

Hello,
I need to enable authentication over LDAP SSL.
I've configured a wallet (auto login) containing required certificates and set accordingly WALLET_PATH and WALLET_PWD settings using apex_instance_admin.set_parameter method.
With this, everything is working fine and LDAP over SSL is working well. It confirms that the wallet is properly configured, valid and usable.
So, the wallet was created with auto login option and it seems to work well without specifying password when calling utl_http.
Proof of properly configured auto login wallet (without password).
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- test without wallet
BEGIN show_html_from_url('https://www.verisign.com/'); END;
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1527
ORA-29261: bad argument
ORA-06512: at "TEST01.SHOW_HTML_FROM_URL", line 25
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-29024: Certificate validation failure
ORA-06512: at line 1TEST01@DB11G> exec utl_http.set_wallet('file:/u01/app/oracle/product/11.2.0/dbhome_1/network/admin'); -- set wallet info for use without password (autologin)
PL/SQL procedure successfully completed.
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- It works!
PL/SQL procedure successfully completed.
So, when I configure WALLET_PATH without WALLET_PWD, it not seems to work as it should with my auto login wallet...
What am I missing? Is it APEX not handling auto login wallets correctly?
Apex Version: 4.2.0.00.27
OS: OEL 6.4
DB: 11.2.0.3 x64
Thanks
Bruno Lavoie

Login error in 3-tier mode Deski

Hi,
We are getting below error when we try to open 3-tier deski from infoview:
"[repo_proxy 13] HttpSessionFacade::openSession - unable to proceed to the handshake : HTTP communication problem".
Below is detail description of issue how it happened:
1. Users were unable to login to CMC, but they were able to login to Infoview.
2. We found that tomcat process was hung. Therefore we restarted the tomcat.
3. After this first error was resolved. But 3-tier login error started.
We did following thing to resolve the issue:
1. We found that there are no patched applied on server recently.
2. Veryfied and found that All require ports like 6400, 8080 are opened.
3. Users are able to telnet to server from there local machine.
4. We deleted all the entries in the LocData Folder on the client.
5. Tried to restart Tomcat and all the BO Services again.
6. Did the port binding for the CMS and the Deski Services.[Input the IP address/hostname in the place of the Auto Align in the
    CMS server properties]
But it did not help. Issue is still there. We also fould below error in catalina.out when we restarted tomcat:
"Port number is already in use: 8000u201D.
Below are my environment details:
===============================================================================
Product: BOXI R3.1 FP1.8
CMS DB: Oracle 10g
OS:Linux
Tomcat - Apache: 5.2
===============================================================================
Please help me in this. Any help would be greatly appreciated.
Thanks,
Swapnil Rodge.

Hi,
We are getting below error when we try to open 3-tier deski from infoview:
"[repo_proxy 13] HttpSessionFacade::openSession - unable to proceed to the handshake : HTTP communication problem".
Below is detail description of issue how it happened:
1. Users were unable to login to CMC, but they were able to login to Infoview.
2. We found that tomcat process was hung. Therefore we restarted the tomcat.
3. After this first error was resolved. But 3-tier login error started.
We did following thing to resolve the issue:
1. We found that there are no patched applied on server recently.
2. Veryfied and found that All require ports like 6400, 8080 are opened.
3. Users are able to telnet to server from there local machine.
4. We deleted all the entries in the LocData Folder on the client.
5. Tried to restart Tomcat and all the BO Services again.
6. Did the port binding for the CMS and the Deski Services.[Input the IP address/hostname in the place of the Auto Align in the
    CMS server properties]
But it did not help. Issue is still there. We also fould below error in catalina.out when we restarted tomcat:
"Port number is already in use: 8000u201D.
Below are my environment details:
===============================================================================
Product: BOXI R3.1 FP1.8
CMS DB: Oracle 10g
OS:Linux
Tomcat - Apache: 5.2
===============================================================================
Please help me in this. Any help would be greatly appreciated.
Thanks,
Swapnil Rodge.

Auto login in Solaris 10

Hi all
I'm trying to establish auto login in Solaris 10, as a regular user or root. This is a personal testing machine, so security is not an issue.
I want to automatically login preferably in the shell mode, ( no GUI if it's possible ), otherwise I can login with GUI, no biggie.
From what I've found, it does not seem an easy job, given that my Solaris experience is somewhat limited, ( been working more on Linux ).
If I can get that going, I'd prefer to run a few scripts upon login, which I think I can do it.
So what steps must I go through to have auto login upon boot ? How hard is it ?
Appreciate any comments. Thanks
PS. Reposted, because I submitted my query in the wrong forum.
Add the line below, to */etc/inittab* file.
ip:1234:once:/full/path/to/scriptEdited by: mysol on Aug 4, 2009 4:12 PM
Edited by: mysol on Aug 4, 2009 4:15 PM

What do you mean by auto login?
Do you want to implement Integrated windows authentication in OIM Design console. If yes, then I don't think it's possible.
Post your requirement here so that ppl can help you out.

Why does a Login Error occur: "AFP Client wants to use Keychain Login"?

I have three people in my house with separate logins. We are currently using two desktop G4s which are networked via 1000 Base T. When the users login to one of the Macs, they must enter their passwords twice. Once for the AppleShare login and then a second time for the KeyChain Login.
If I attempt to unify the passwords, which are exactly the same, I will get a login error: "AFP Client wants to use Keychain Login". At this point, a dialogue box will appear looking for a password, but not accepting any kind of text at all. All I can do is reset the Mac, go into my admin login and remove the login.keychain file from the local Library folder to get back into the User account.
In my attempts to fix this, I have removed every preference file with the word "login" in it and re-logged in without success. I have also used the Keychain Access software to administer Keychain First Aid without success. Finally, I have deleted the keychain login in Keychain Access without success. I have done all of these separately and together without success.
This is only happening on one Mac. The Mac that has no files on it. All working files are stored on the other Mac and it does not have the same problem at all.
This is not a huge problem, but it is annoying. I would appreciate it if anybody knows anything about this and could shine some light on the situation.

Sorry about the delay from your last reply. I have been busy with work and studying for a licensing exam.
Anyway I tried the AppleJack Utility you suggested. It looked like it tidied up some things. But as for my particular issue, it did absolutely nothing.
Interestingly enough, you know when you aren't looking for something and that something just happens by accident? When I logged in the other day, I typed in the first login. The second dialogue came up immediately and I hit the cancel button instead of the OK button. When I was passed on to the Finder, the second login dialogue came up again. I typed in the password this time and checked the checkbox. When I relogged in, the problem vanished. I only waited this long to let you know to make sure the problem is gone and it is. I wish I would have thought of selecting the cancel button before. Sometimes solutions are simple like this one.
Thanks for your help.

View Planner 3.5 Auto Login

I am having an issue where I have the GoldenDesktop Setup. It logs in without issue. This VM was created with the same customization file as the next set.   Once I use the View Planner to provision the remaining VMs, each have their local admin account disabled.   They do report to the View Planner. They do start the workload. However, only the original VM uploads the data. Any ideas?

Yes, agree.   The auto login was working after the view agent was loaded. However, once the customization wizard ran, I noticed a few changes. The admin was disabled and the registry entries were missing under HKLM\Software\Microsoft\Windows NT\CurrentVersion\winlogin. The keys needed to login were AutoAdminLogon = "1" (Enabled), DefaultUserName = Administrator DefaultPassword = Q1w2e3r4! .   This was present before the customization wizard. So, I looked at the customization wizard closer. On the 4th step for "Administrator Password" you need to set the password toe Q1w2e3r4!. Furthermore, place a check mark for "Automatically log on as the Administrator". I also set this value to 10.   After doing this, the login portion worked.
The second issue I had was the .bat file behavior.   It needed to be set to "open this file each time". Since there were only 50 desktops, I check the box on each and pressed open. I'm sure there is a setting to fix this. However, I haven't researched it enough to comment just yet.

CUP Provisions user to SAP successfully but gives "Auto-Provisioning" error

Hi All,
I'm getting an "auto-provisioning" error in CUP when a "Change Account" workflow is approved. The strange thing is, CUP does successfully provision the change to the SAP backend. Yet, the "New Account" provisions successfully without the error.
Here is an example of the audit trail log from Change Account:
Request submitted for approval by Dylan Hack(HACKDY) on 06/28/2010 17:14
Approved By Dylan Hack(HACKDY) Path AE_AUTO_APPROV_ERROR and Stage AE_AUTOPROV_ERR on 06/28/2010 17:14
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
Auto provisioned for request on 06/28/2010 17:14
   User Provisioning failed for System(s) : DEV. Error Message :
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
Request submitted for reroute by system on 06/28/2010 17:14 due to auto provisioning failure
   Rerouted in the Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR to Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR
Note: the role names were replaced with "xxxxxxx."
The system log gives an error, but it is very vague:
2010-06-28 17:14:34,682 [SAPEngine_Application_Thread[impl:3]_33] ERROR com.virsa.ae.service.ServiceException
com.virsa.ae.service.ServiceException
     at com.virsa.ae.service.sap.SAPProvisionDAO.intializeWithChangeUserInputParameters(SAPProvisionDAO.java:762)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3457)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3419)
Any ideas or suggestions?
Current software level AC5.3 SP12.
-Dylan

Hello Varun,
Thanks for the thought on this. We don't use User Defaults for Change Account, but do for New Account. You question prompted me to do more testing with very interesting results.
Results
New Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
New Account without User Defaults configured:
User provisioned successfully, no Auto-Provision error.
Change Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
Change Account without User Defaults configured:
User provisioned successfully, Auto-Provision ERROR, Defaults NOT provisioned.
In both New and Change Account, the configured User Defaults are NOT provisioned even though the user is provisioned. AC5.3 is on SP12, the RTA is VIRSANH SP12 and VIRSAHR SP10.
For the Change Account, the user is always provisioned regardless of User Defaults; however, when no User Default is configured, the Auto-Provisioning error occurs. The User Defaults NOT provisioning is a real problem, the CUP error message, I can work around for now.
What about on your side? Am I the only guy using SP12 here?

Auto Login Error

Similar Messages

Maybe you are looking for