Auto Login Option, Perhaps?

I'm noticing that the forums don't (at least, not that I've been able to find) have an option to automatically log in whenever I visit the site.
I'm a huge believer in auto-login, especially as I tend to (as I've done today) navigate away from one page (such as the forums) to take care of something, and like being able to navigate back and have the forums still live. (And while I do know there's a possibility to prevent myself timing out, using auto-login also helps when I access from multiple places throughout the day... my desktop, my laptop, my computer at work...)
Is there any possibility adding such an option?
Thanks in advance!

i_like_turtles wrote:
i also agree with the auto logon, its like a 10 minute idle period and boom its gone !!
But if you set the timer as a I suggested in my previous post in this thread most of the "boom its gone" will be gone The only time I now sometimes get logged out automatically with the timer set to 2 minutes is when I view a thread and then just leave it sitting there instead of going back to the list. Try it, it is not the same as auto login by any means but it does mostly keep you from getting logged out due to inactivity.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248
Message Edited by Justin on 07-29-2009 03:11 PM

Similar Messages

Disabling Auto-Login Option

How do we disable Auto-Login option in OBPM 10GR3 because I get the following error:-
You have the autologin option enabled and the session for this execution has expired .

So nobody else has been bitten by this stupid bug?
Anyway, it happens on a pure VGA console too, so it has nothing to do with the video driver. And I take back the “more of an inconvenience” part – it is freaking annoying that one can not just properly change the runlevel. Oh well…

Auto login cwallet requires password

I created a cwallet with orapki and auto_login using putty. OHS startall fails with error
Cannot open an encrypted wallet file (wallet location) while process is managed by OPMN. Enable it as SSO wallet
On reading up furthur, I found that Enable it as SSO wallet means that the wallet requires a password. I had checked the auto login checkbox when the cwallet was created using OWM.
To confirm that password was the issue, I tried opening the cwallet using the command
orapki wallet display -wallet wallet_location
The command did request for password.
Even though i had checked the auto login option why has the display of the cwallet requested for password.
(FYI - cwallet was created from ewalllet.p12, ewallet opens fine with the oraclepki command after i provide the ewallet password. Hence there are no issues with my ewallet.p12 file)
Can this issue be environment related.
Thanks in advance for the help.
Edited by: 929837 on Oct 17, 2012 12:08 PM
Edited by: 929837 on Oct 19, 2012 3:44 AM
Edited by: 929837 on Nov 19, 2012 1:28 AM
Edited by: 929837 on Nov 19, 2012 1:29 AM

User i had used to access OWM, to save the wallet, to get the cwallet is the same user who has access to all the folders in the installation.
After closing the wallet manager i immediately try opening the generated cwallet file with orapki display command with the same user id, yet it requests for password.

Auto-login broken?

I had auto-login enabled for some time, but suddenly I'm being asked to enter details on each visit to the forums. The auto-login options in My Settings still say, "You can turn off auto-login ...". If I choose to turn it off I get a success message which also says, "To re-enable auto-login, check Remember Password the next time you log in." Trouble is that this option does not appear on my next visit. So it seems that the system still regards me as on auto-login but it isn't doing it.
I can set my computer to remember details, but prefer to enter the site automatically. Is there a general fault, or is it just me?
You can click the white star next to this message if you think it was helpful.

Hi pottyperson,
The reason this is happening is because the login box on front page does not have a remember me tick box anymore. You may have cleared cookies etc which mean settings to be ‘remembered’ were changed.
The only way to set this back up now is to log in via the login page which can be accessed via the link in KerryG's post here; http://community.bt.com/t5/Forum-Guidance-Ideas/Community-Login/td-p/268959
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Auto-Login into these forums here possible ? Enabling by cookie ?

I would appreciate if there is an auto-login into these forums from Oracle.
Currently every time I re-visit the forum pages I have to type in my login+passwd again.
Usually in hundreds of other forums there is an auto-login option selectable.
Could enable this forum feature?

You can post enhancement suggestions in the feedback forum
Community Feedback (No Product Questions)

Auto-Login into these forums here possible ? eMail of forum admin ?

I would appreciate if there is an auto-login into these forums from Oracle.
Currently every time I re-visit the forum pages I have to type in my login+passwd again.
Usually in hundreds of other forums there is an auto-login option selectable.
Does someone know the eMail adress of the forum admin. I would like to suggest this directly to him

You can post enhancement suggestions in the feedback forum
Community Feedback (No Product Questions)

Cisco CIM 4.3.2: Webchat auto login

Dear all,
I try to use the auto login in on chat function for customer page.
I did enable auto login option to YES on entry point config.
Document says to change the HTML code to this format
('http://MY SERVER NAME/system/LiveCustomerServlet.egain?eglvcmd=CustEntry&entryPoin
tName=Default
EntryPoint&eglvepid=1003&departmentid=1002&eglvpartid=1&referer='+refererurl+'&
eglvrefname='+refererName&fieldname_1=Name&fieldname_2=EmailID&fieldname_3=Phone-
number,'',params)
I know Name, EmailID and Phonenumber, I need to transfer from variables on my web session butI try to replace Name, EmailID and Phonenumber with static string for testing.
I tried this thing but unsuccessful.
('http://MY SERVER NAME/system/LiveCustomerServlet.egain?eglvcmd=CustEntry&entryPoin
tName=Default
EntryPoint&eglvepid=1003&departmentid=1002&eglvpartid=1&referer='+refererurl+'&
eglvrefname='+refererName&fieldname_1=Thanh&fieldname_2=[email protected]&fieldname_3=12345,'',params)
Can anyone help me on this? Any syntax error with my web link?
Thank you,
Thanh

This can be achieved through customization, but when no agents are available when clicking on chat a message will show that no agents are available.

How to configure LDAP SSL using auto login wallet?

Hello,
I need to enable authentication over LDAP SSL.
I've configured a wallet (auto login) containing required certificates and set accordingly WALLET_PATH and WALLET_PWD settings using apex_instance_admin.set_parameter method.
With this, everything is working fine and LDAP over SSL is working well. It confirms that the wallet is properly configured, valid and usable.
So, the wallet was created with auto login option and it seems to work well without specifying password when calling utl_http.
Proof of properly configured auto login wallet (without password).
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- test without wallet
BEGIN show_html_from_url('https://www.verisign.com/'); END;
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1527
ORA-29261: bad argument
ORA-06512: at "TEST01.SHOW_HTML_FROM_URL", line 25
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-29024: Certificate validation failure
ORA-06512: at line 1TEST01@DB11G> exec utl_http.set_wallet('file:/u01/app/oracle/product/11.2.0/dbhome_1/network/admin'); -- set wallet info for use without password (autologin)
PL/SQL procedure successfully completed.
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- It works!
PL/SQL procedure successfully completed.
So, when I configure WALLET_PATH without WALLET_PWD, it not seems to work as it should with my auto login wallet...
What am I missing? Is it APEX not handling auto login wallets correctly?
Apex Version: 4.2.0.00.27
OS: OEL 6.4
DB: 11.2.0.3 x64
Thanks
Bruno Lavoie

Hello,
I need to enable authentication over LDAP SSL.
I've configured a wallet (auto login) containing required certificates and set accordingly WALLET_PATH and WALLET_PWD settings using apex_instance_admin.set_parameter method.
With this, everything is working fine and LDAP over SSL is working well. It confirms that the wallet is properly configured, valid and usable.
So, the wallet was created with auto login option and it seems to work well without specifying password when calling utl_http.
Proof of properly configured auto login wallet (without password).
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- test without wallet
BEGIN show_html_from_url('https://www.verisign.com/'); END;
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1527
ORA-29261: bad argument
ORA-06512: at "TEST01.SHOW_HTML_FROM_URL", line 25
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-29024: Certificate validation failure
ORA-06512: at line 1TEST01@DB11G> exec utl_http.set_wallet('file:/u01/app/oracle/product/11.2.0/dbhome_1/network/admin'); -- set wallet info for use without password (autologin)
PL/SQL procedure successfully completed.
TEST01@DB11G> exec show_html_from_url('https://www.verisign.com/'); -- It works!
PL/SQL procedure successfully completed.
So, when I configure WALLET_PATH without WALLET_PWD, it not seems to work as it should with my auto login wallet...
What am I missing? Is it APEX not handling auto login wallets correctly?
Apex Version: 4.2.0.00.27
OS: OEL 6.4
DB: 11.2.0.3 x64
Thanks
Bruno Lavoie

Auto logins on websites no longer working

I recently (a couple days ago) got a pop-up on the lower part of my screen that said that firefox was going kind of slowly or something along those lines and said if I would like to fix this that I could click this button. Well I did that and it took me to a page that talked about resetting firefox to its default settings but that all info pretty much would be kept correct like my passwords, bookmarks, addons, and other things like that. Well I said what the heck and tried it and when it was finally done doing what ever it was doing I get back online with none of my opening tabs aloud to be there so that was wiped out, my book marks were there so that was good, but all of my addons like X-notifier and things like that were now gone, and when I go to pages now it has no idea who I am. My user names don't show up or the passwords. I can login to them and it might be fine for 5-10 minutes but then all of a sudden it tells me that I need to login all over again. Even my X-notifier does it and its supposed to know my login permanently so I never have to type it in. But I can be in the middle of sorting my emails and trying to delete something get a message that says I am no longer signed in to my email account.
I have searched all over in the tools>options area and made sure everything is the same as it used to be with saving passwords and even scrolled through my stuff saved to see if something had gotten deleted but they are all there and I see no reason why it would not log me in to the ANY site. I know some of the sites out there don't like to allow auto login stuff which I am fine with but some of these websites I am the owner of and I know for a fact that its not my site doing it. The repeated login issue is really getting on my nerves cause its started to disturb my daily working. Please help me with figuring this out.
Thanks
Troy

I am going to try the stuff mentioned by you above and see if it helps. I know its affecting this site as well and isn't keeping logged in at all as I have had to re-type my password each time I come here.

Safari Auto-login/ Auto-fill problem

Hi!
I recently updated my safari after which I have been unable to auto login to my yahoo,gmail etc accounts. I have checked my safari preferences and all 3 auto-fill webform tabs are clicked. Also, when I go into yahoo, it does not prompt me to ask if i want to save my password. For my other accounts e.g gmail, they prompt me and my password + user-ids are still saved, just that i have to press the sign in button.
Also, it stays signed it as long as i am on safari. However, if I were to quit safari and use safari again, it goes back to square one and no longer keeps me signed it.
What can I do to enable safari to auto-login for all my accounts?
Thanks!

I have asked a similar question several times before, and I have the answers varied from the typical I do not have that problem to its a security feature incorporated in Safari.
I tend to think it is a new feature added ito safari n the last several months (via an update).
The bottom line is I am NO longer able to stay logged into various websites if I quit safari, even though the websites have the feature available that should allow a user to stay logged in for 2 weeks.
The only way I can now stay logged in for an extended period of time is to NEVER quit Safari.
That is not an option for me.
rjj

Background auto-login at boot

I have a G5 running Leopard that I'm using as a print server. I would like to set it up to automatically login into a certain account when it boots up—to start up my printer RIP—but I'd like to hide that boot process from any users who happen to be around at the time. Assuming I have fast user switching enabled, is there a way to script a login as a background boot process?

I'm not quite sure what you're asking. Here's what I think you mean:
-you want your computer to auto-login to a certain account on boot--see Sys Prefs -> Accounts -> Login Options
-you want to start a process at boot -- try using Lingon (http://sourceforge.net/projects/lingon/files/)
-you want to hide the existence of the process you started from anyone who might be poking around in Activity Monitor/top/ps -- 1) you can't; 2) why would you want to?
-you want to be able to use fast user switching and still have your process running -- set up your job in Lingon as a "System Daemon"
Is that what you mean? Please ask if you meant something else.
ddr

MDT 2012 - Auto login settings were gone at the end of the deployment

I need to make some PC for public use (Has a local user account that no need to login)
There's no problem for me to created the local user account and and its profile folder by using custom tasks.
The auto login settings also successfully set by modify the registry or use Sysinternals - Autologon.exe
But after the last restart of th PC (I set to restart at the end of the deployment), Windows stuck at the login screen.
Then I found that all the auto login settings were gone (Both in the registry and netplwiz).
Since this custom task is place near the end in the Task sequence (which means there should be no other task that can influence it). So, I suspect may be the Group Policy reset all those settings.

I had the same problem, and these were my solutions:
Comment out the relevant lines in LTICleanup. I tried to avoid this, in case any updates to MDT reversed the change. Also even if I documented it, it might not be apparent to another technician years down the line. I prefer to leave the MDT files unchanged.
Create a script that runs after the task sequence has completed. This is the option I chose, and it was a bit more complicated than it appeared.
What I did was as follows:
Create a new AutoLogon Script application.
The "application" must consist of two script files: install and autologon.
The "install" script does the following:
Copy the "autologon" script to a temporary folder on the local drive
Create a new scheduled task which runs on startup, as the SYSTEM user, and runs the "autologon" script (using schtasks.exe)
The "autologon" script does the following:
Create the relevant registry keys to enable automatic logon.
Delete the above scheduled task.
Reboot the workstation.
In the MDT task sequence, create a new task at the very end, which installs a single application. Choose the AutoLogon Script application.
In your CustomSettings.ini, set FinishAction=REBOOT
So at the end of your task sequence, the workstation will reboot. It will then run the autologon script after boot up, but will not autologon. When the script finishes, it will reboot again, at which point it will autologon with the details you specified.
It's a little fiddly, but works for me.
Johan Arwidmark has another method here, which might be even easier - http://www.deploymentresearch.com/Research/tabid/62/EntryId/122/Final-Configuration-for-MDT-2013-Lite-Touch-now-with-Autologon-support.aspx

Auto login wifi guest network

hi all,
we running an iPad pilot within our company and I'd like to use the internal wifi guest network. the guest network is using a loghin page with userid and password and a little checkbox to accept the terms.
when i connect with the ipad (and iphone as well) and fill in the required fields it nicely connects. but after sleep or a reboot it keeps coming with the login page and needs the uid/pw/checkbox. I can make the ipad remember the uid/pw and it fills them in the login page but it keeps wanting the checkbox.
there should be some automatic protocol to auto login so I connect to the company wifi just like it is at home (i know, wpa2 at home is completely different, but for the end user is isn't
is there an option somewhere in Iphone config util? Can I pre-deploy guestnetworks with ipcu?
anyone?
cheers,
emiel

This is not an iPad / iPhone issue. This is an issue with the way the network is configured in regards to authentication.
Just a guess, but I'm betting you don't have the cooperation of the IT department in this venture, do you? If you have a separate, secure internal network, You may be able to convince them to allow the iPads access to that network instead. The fact that you're trying to use the guest network tells me that IT either doesn't know about this or has prohibited their use on the company network.
That, or the company contracted out the configuration of the network and no-one knows how to get around it.
This wouldn't by chance be a hotel, would it?

How to hide user id and password for auto login in Analyzer 6.5?

Could anyone tell me is it possible to hide the user id and password for auto login in Analyzer version 6.5 and how?Thanks in advance...

Sainath,
Referring admin guide as mentioned by Craig is good option.
Let me give you few steps that I did in one of my projects.
Open command prompt and navigate to the path "C:\Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client".. here you can see many see other utilities as well.
drm-batch-client-credentials.exe is the one used to encrypt the userid and password.
open this in command prompt and then choose the application to which you want to encrypt the password.
then remove userid and password from batch script then run it... it does what you want

Norton Manage Logins Icon is missing with Firefox 4.0. My auto logins no longer work

Norton has a manage logins icon that has disappeared from my toolbar when I updated to Firefox 4.0. Additionally, the Norton auto login function has stopped working, even though it appears fine when I look at the function in Norton.

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have released an update for Norton 360 to make it compatible with Firefox 4, for details see http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about other Norton products, but if you run Norton LiveUpdate it should inform you if there are updates available. If no updates are available, you can downgrade to Firefox 3.6 if you want to use the Norton add-ons.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Auto Login Option, Perhaps?

Similar Messages

Maybe you are looking for