Auto lot generation for repeatative manufacturing.

I want to learn the usage of inspection type 13...Since 03 is for discrete manufacturing during production-, I think that 13 is for repetetive manufacturing during production- ... But I couldn't use this inspection type (13) to create an automatic inspection lot. First I activated 13 inspection type for the material. Then I inserted an operation for the run schedule and also control characteristics. Then I create a planned order but the system didn't create an inspection lot. Also I don't know if it's true to expect from the system to create an inspection lot after planned order creation (since it's repetetive manufacturing I don't have any production order to create). But I could only create an ispection lot with source insp.type 13 by t-code MFPR. But I don't want to create manually by MFPR. Is there an automatic way to create an ispection lot for during rep.manufacturing ?

Hi
In REM after RS header is abolished ( after ver 4.5) , you have to create inspection lot manually onle in MFPR.
Thers is no other method in STD SAP.
Regards
YMREDDY

Similar Messages

Inspection lot generation for 343 movement type.

Hi,expert,
My client's requirement is to generate inspection lot when a specific type of material is transferred from block stock of a storage location to unrestricted stock of another storage location i.e. movement type- 343, can anybody please explain how to generate the inspection lot and what are the settings, master data to be maintained? thanks in advance.
rgds
rajib

Hi Rajib,
In first place you need to have Quality infor record for material and vendor create through QI01 t code.
QM must be activated for mvt type 343 in SPRO --> QM --> Qual Insp --> Insp Lot Creation --> Inspection for goods movements.
Check the box "QM Proc. Active" in Mat master in Quality tab.
Activate inspection type 08 in mat master.
Then do the transfer posting you will get mat doc number.
Go to display mode of mat doc,
You will find Ins lot number created in Quantity tab at item level of material document.
Thank You,
Anand K

Inspection Lot generation for Movement type 101-O

Hi
I would like to know, which config / Master data need to generate Inspection Lot for Movement type 101-O.
I enter subcontract vendor number and set 'SC Vendor' indicator in purchase order delivery address tab and I created QM data in Material Master.(Insp.Type 01)
While doing GR with reference to purchase Order, stock is Posted to Material provided to vendor - Quality inspection stock. But Inspection Lot
is not generated.
Pl suggest me, What should i do to generate Inspection Lot.
Thanks in Advance.
RRS

hi
Soln 1) Just check whether Inspection is active for 101 - O in SPRO settings if not, activate the same.
Path: Inspection Lot creation/Inspection for Goods Movement
Soln 2) As you flag "SC Vendor" in PO and make GR all stocks will be shown against the Vendor.
From your question I assume that you would like to do inspection for materials coming from Subcontactor end to your Plant:
If this is the case you dont flag "SC Vendor" in PO, make a normal Goods Receipt for the Subcontracting PO, based on Insp setup in Material Master for 01 Insp type Insp lot will be created.
Regards
DC

Question about: Auto PO generation for third party sales order

Hi all,
Not sure if this is the right place to leave this question but giving a shot.
In Sales Item category we have a check box called generate auto po. By reading the help i came to know that it generates PO and/or Purchase Requisition automatically on saving the Sales Order. It is also said that we need to make some ALV setting. Can any one lead me how to configure the setting,so that i can be successful in knowing about Third party Orders.
Thanks & Regards
Mukund

Hello Mukund
It is talking about ALE- Application Link Enabling - not ALV. That is if you have distributed applications and use ALE to communicate between them. I don't think you need to do anything else. Just go ahead and test it. And if your MM Purchasing master data is set up correctly, you should be able to see the message about PO creation when the sales order is saved.

Auto Po creation for Services from service PR

Dear friends,
I need to configure the same scenarion Auto PO for Service PR with item cat D and Account assignment K.
I have done following settings.
1) Auto PO marked in Vendor master
2)SproMMExternal Services ManagementSource Determination and Default Valuesfor Purchasing Organizations-Auto Po generation for service requitions.
3)PR created with Item cat --D and account assignment cat K with material group as input data.
no material number and service number.
4)Info record created for material group and vendor.
5)Source assigned to PR via T code ME56
now i am trying to create the Auto PO via ME59N but i am getting the message " no suitable PR found"
Please suggest the action.
Looking for your reply.
Thanks & Regards,
Vinod Kshirsagar
09420693261
Edited by: vinod kshirsagar on Jan 3, 2008 1:04 PM

Since u have assigned source of supply--only enter PR
Try to creat through me58
for me59
Check the following
vmr --auto PO tick
mmr/smr--auto PO tick
info record--tick
source of supply with fixed source..

Auto Inspection lot generation

Dear All Experts,
I have created new inspection type as Z01 by copying the 01 and I have maintain Inspection Lot Origins and Assign Inspection Types under 01. After that I have assigned my new inspection type Z01 to material master and activated it with material post to quality. Up to this it is working fine but after GRN system is not creating the lot. Even thou material is posting to the quality stock but no lot is in QA32.
But if I Create the lot wih QA01 it working fine and I'm able to do the UD also. But for no automatic lot generated for purchase order.
Please provide the details how to resolve this issue?
Thanks and Regards,
Manish
Edited by: manish gurnule on Feb 17, 2009 5:39 AM

Dear,
Yes it is there and I have copied insp type 01 to Z01. and material master setting are also there.
Please help.
Any others inputs
Regards,
Manish
Edited by: manish gurnule on Feb 17, 2009 7:26 AM
Edited by: manish gurnule on Feb 17, 2009 8:21 AM

No inspection lot created for new inspection type created

Hi all,
We create a new inspection type which is based on a copy-version of an existing inspection type. These inspection type has a inspection type origin of standard SAP 04 (i.e. Goods Receipt from Production).
Question 1 - we bumped into problem when come to testing in which when perform goods receipt, there is no inspection lot created, may I know why?
The following fields of this new inspection type are all checked; those not specified, are not flagged.
1 - Insp with task list (flagged); Automatic Assginment (flagged); Check Chars (flagged); Skip Allow(flagged); Automatic UD(flagged); Serial Number Poss (flagged).
Question 2 - for this kind of inspection type with origin 04, do i need to perform a goods receipt against a production order or purchasing order? How do I perform a GR against a production order?
Thanks.

Hi Tuffy,
Possibly you might not have ticked on preferred inspection type in material master. This could be one of the reasons. Try to do GR after ticking this.
The setting you have mentioned (flagged parameters)are seems to be correct. But lot generation is governed by preferred inspection type.
If you have assigned this newly customized inspection type to lot origin 04, then it would be used against production order and not the purchase order.
There are several ways to carry out GR against production order. It depends on the scenarios which you follow
1.     MB31 101 movement
2.     You may use backflush so while confirming order through CO11N auto GR is posted
3.     In case of repetitive manufacturing scenario generally GR is done by MFBF transaction
Regards,
Anand Rao

Indenting of Consumables and stationary items ZCON - Auto PR generations

Dear All,
We are Diagnostics industry having around more than 1000 consumables & Stationary items under Material Type : ZCON
Manual PR is being prepared every month after reviewing stock and past consumption. But it takes lots of energy to review each materials every time.
I am looking finding following options for Auto PR generation ; please suggest relevant transactions or practices in similar industries
a ) Entering Minimum Stock Level in Master
b) Material Category to ND/PD or other
c) System Alert after getting lower level of stock. etc..
Please suggest the practice or any transactions.
Hasnain Bansiwala

Hi,
You can use CBP (Consumption-Based Planning) for achieving this.
You need to :
1. maintain a MRP Type (VB), Re-Order Point and Lot Size in Material master for teh products.
2. Run MRP at regular intervals (daily / weekly depending upon the consumption patern)
System will automatically create a PR for each product that has stock level below RoP.
Hope this helps

In Process Inspection for Repetitive Manufacturing

Hi All,
I'm trying to perform in-process inspection for repetitive manufacturing. I have a semi finished material which has the inspection type 13 activated in the material master. Rate routing for it has also been created. Characteristics have been assigned to its operation and the routing is attached to a production version. When I o to MFPR to create a lot, I specify the material, plant and production version with QM active (tried the other 2 options as well) but when I execute, nothing shows up in the list. When I click on create inspection lot, it says, "either select versions or place cursor on versions now" but there's nothing in the list?
Regards,
Bilal

Hi,
Please check whether the repetitive manufacturing check box and REM profile is defined in the MRP4 of material master.
Please define that and try to run the transaction MFPR.
It should solve your problem
Regards,
Sumit Gupta

In house prod. time for continuous manufacturing

Hello friends,
I want to enter in house production time in matarial master for continuous manufacturing process.I am using Base Unit Of Measure "Quintal".It is not possible to calculate In house production time. So how can I define it?
Thanks!!

Hi,
In-house production time is lot size independent it use to schedule the order with basic date only, but when we do the lead time scheduling or create production order then system take the values from routing as it is lot size dependent.
It is not possible to calculate In house production time?
So pls maintain the approx time in material master then schedule the routing ca02extrascheduling--schedule after that click on scheduling result and update material master.
Then go to CA96 and update the result in to material master and check the time in material master--work scheduling view.
Hope it will clear your doubt.
Regards,
R.Brahmnkar

Implementing Auto Contract Generation/Negotiation and Execution

Would love to hear from anyone that has implemented auto contract generation/negotiation and execution. Were there any lessons learned you could share during implementation? Were there things you found out - too late? Are you seeing adoption? How long did the implementation take? Pain points along the road? Things you would do differently? We are getting ready to take this trip ourselves and I have a feeling it will not be smooth sailing.

Hello Sravan
Your message isn't clear fo me
If you used import for new master data you can use automatic key generation ability for inbound port
The another way:
You can create special key field in MDM and
create simple workflow which fire when ADD record.
That worklflow call assignment which fill key field
Regards
Kanstantsin

Inspection Char without Inspection lot generation

Hi
We are trying to model a customer requirement in PP for which a few production steps have a few characteristics to be monitored (status checked); for example - in a process of "spraying fertilizer", qty of 4 fertilizers have to be noted in the operation. Now these cannot be included in the BOM for some costing issues. We are apportioning the cost using an internal order in FI.
Can these be modelled in PP as inspection char. for which values (readings) have to be noted without generation of inspection lot?
Any ideas?
Deepak

Hi Deepak,
One thing you need to clear is that without inspection lot generation you cannot record the values. Instead, you can create the inprocess inspection lot which does`nt effect the actual production, you can record results such as quantity etc.. for each operation for ur reference.
The secong thing you can do is select any field or the text box that you are not usingit currently in the confirmation and enter the characteristics in that field.
Final option is to create a document and save it with reference to ur order no. , bom etc..
Reward if cleared and close the thread.

Business partner auto code generation

hi how to create business partner auto code generation. its based on customer group for example we have more customer group..dealer, distributor,subcontractor...
here dealer and distributor group starting cardcode is - C000001,C000002,C000003..... etc
when i was choose subcontractor its starts SUB00001,SUB00002...... etc
vendor is maintain same starting letter in all groups V000001,V000002
Thanks in advance
Thanks & Regards
B.Lakshmi Narayanan

hi thanks for your valuable replies...
i changed the codes...pls check its right or wrong
declare @temp as char(20)
IF $[OCRD.GroupCode] = 104 and $[OCRD.cardtype] = 'c'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (groupcode= 104) and (len(cardCode)=7))
set @temp='TRA'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.cardtype] = 'C'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (len(cardCode)=7))
set @temp='C'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.cardtype] = 'S'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (len(cardCode)=7))
set @temp='S'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
Thanks & Regards
B.Lakshmi Narayanan

Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

How to change auto logoff time for Essbase AddIn when Essbase server is in Shared Services mode

Hi all,
could anybody describe me the way to change the auto logoff time for the Essbase Excel AddIn? I only know the possibility to change the properties in the EAS console, but our Essbase Server is running in Shared Services mode so the relevant settings doesn't apply...
Thanks a lot!
Kind Regards
Andre

You should still be able to set the "Inactive limit" in EAS or use Maxl e.g. alter system set session_idle_limit x minutes;
Cheers
John
http://john-goodwin.blogspot.com/

Auto lot generation for repeatative manufacturing.

Similar Messages

Maybe you are looking for