Auto-Managed configurations via WLSE 2.15

I'm managing a very large roll out of AIR-AP1131AG access points, all in autonomous mode, using a WLSE running version 2.15.
Due to the current network environment, these are all being shipped out with a basic configuration as there is no dhcp service at the remote sites. I'm then using the WLSE to push out a full config to the newly installed access points.
I can manually create a configuration job and push out the final config to access points that have already been discovered and managed by the WLSE. However, I've never been able to get the Auto-Managed config option to work - the WLSE never attempts to push a config when the devices are first discovered and managed.
I hope I'm just missing something (not so) obvious in the WLSE config.
In the WLSE interface, under Configure->Auto Update->Auto-Managed Configuration->Assign Templates, I have a template created, the Enable box is checked, I have a known-good configuration template selected, and under Matching Criteria: I have Device Types checked with AP 1130 in the selection box. I also have Update device credentials checked and Copy Running configuration to Startup configuration checked.
Under Auto-Managed Configuration Options I have SSH selected as the protocol, and Email results of auto-managed configuration jobs to (my email address).
The WLSE never tries to push a config to access points when they're first managed, so I have to manually find the newly-discovered access points and create a configuration job to push the configs to them.
I have a TAC case open on this issue, but I'm having a tough time just getting the TAC engineer to respond.
What might I be missing here?
Thanks...

Such issues have happened occaisonally . I usually go about by resetting and reconfiguring WLSE from the beginning. Now I have plans to upgrade the software to see if it resolves the issue.

Similar Messages

"Enterprise manager configuration failed due to the ff... 11 g/windows 7

I get this error message, when using DBCA to create a database. Please help! Studying on my own for OCA.
Error message : "Enterprise manager configuration failed due to the following error - Listener is not up or database service is not registered with it. Start the listener and register database service and run EM Configuration Assistant again."
I did the following :
(1)Checked listener service properties and found that the path to executable was
driveletter:\app\product\11.1.0\db_2\bin\oracle.exeoca11g
I change the path above to what is listed below:
driveletter:\app\product\11.1.0\db_2\bin\tnslsnr
I updated :HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOCA11gTNSListener
image file to reflect the change .
I got the above suggestion from a blog. Not sure if it is right or wrong, but it seems logical. However, it did not resolve my issue
(2) I ran the emca script in db_home/bin directory as suggested by the warning message in DBCA wizard. Reboot my PC. Still no luck.
(3) I open DBCA to verify the database(via delete) is created, and yes it is .
I open EM and attempted to log into the tool as Sys/sysdba user. I get username and/or password are invalid error message. URL: https(strike-through)localhost://158/em/console/logon/logon
I can connect to SQl plus as either a sys/sysdba user but into EM.

Ok here is my listener status
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 25-JAN-2013 14:01
:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 25-JAN-2013 07:12:48
Uptime 0 days 6 hr. 49 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\Barbara\product\11.2.0\dbhome_2\network\admin\l
istener.ora
Listener Log File c:\app\barbara\diag\tnslsnr\Lenovo-PC\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "OCA11GXDB" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "OCA2XDB" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "oca11g" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "oca2" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
This is the OracleoraDB11g_home1TNSlistner image file value is this
C:\app\Barbara\product\11.2.0\dbhome_2\BIN\TNSLSNR
Aaaah! I do not like the sound of this. Oracle enterprise edition does not support windows home edition and Oracle XE does not have DBCA included.
Ok, so this is a road block, please suggest alternative routes.
Thanks
Edited by: Ant13 on Jan 25, 2013 2:21 PM
Edited by: Ant13 on Jan 25, 2013 2:33 PM

Oracle 10g is an auto managed database. Why ?

Oracle 10g is an auto managed database. Why ?
I have read that with 10g version, Oracle database will need very less management, since it can be configured to automanage itself. Sounds not believable.
Apart from auto extending tablespaces, what others tasks can be automanaged in Oracle DB 10 G release ?
Please discuss.
Gony

Wow I feel like I'm back in college... are you in school?
How about ASSM?
All kinds of things on that from google.
http://www.google.com/search?hl=en&rlz=1C1GGLS_enUS291US303&q=oracle+assm&aq=f&oq=&aqi=g3
http://www.google.com/search?hl=en&rlz=1C1GGLS_enUS291US303&q=automating+oracle+databases&aq=f&oq=&aqi=
P.S. What is this all about? RMAN - Gony's reading task for 07/11/2009
Edited by: TimS on Jul 10, 2009 4:26 PM

HANDSHAKE_FAILURE problem when starting managed server via NOdeManager

hi all, i am trying to start a managed server using nodeManager, but i keep on
getting following exception:
weblogic.nodemanager.NodeManagerException: [Could not execute command start for
server managedServer via the Node Manager - reason: [CommandInvoker: Failed to
send command: 'online to server 'managedServer' to NodeManager at host: 'localhost:5555'
with exception FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable
to negotiate an acceptable set of security parameters.. Please ensure that the
NodeManager is active on the target machine].] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeManagerRuntime.java:472)
at weblogic.nodemanager.NodeManagerRuntime.start(NodeManagerRuntime.java:76) at
java.lang.reflect.Method.invoke(Native Method) at
here is my script for starting nodemanager
set JAVA_HOME=c:\bea\jdk131
set WL_HOME=c:\bea\weblogic700
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
set CLASSPATH=.;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar
java -hotspot -ms16m -mx16m -classpath %CLASSPATH% -Dbea.home=C:\bea\weblogic700
-Djava.security.policy=C:\bea\weblogic700\server\lib\weblogic.policy -Dweblogic.nodemanager.weblogicHome=C:\bea\weblogic700
-Dweblogic.nodemanager.listenAddress=172.21.73.94 -Dweblogic.nodemanager.listenPort=5555
-Dweblogic.nodemanager.trustedHosts=C:\bea\weblogic700\common\nodemanager\config\nodemanager.hosts
-Dweblogic.nodemanager.certificateFile=C:\bea\weblogic700\common\nodemanager\config\demo.crt
weblogic.nodemanager.NodeManager
i have created an admin server, called adminserver
then i have created in the same domain a server called managedserver
both servers run on the same machine,at different port number.
i have created a machine, and associated managedserver to it.
in the machine/configuration/nodemanager i have set listenaddress localhost and
listenport 5555.
my nodemanager starts automatically at htat port. however, when i try to start
the managed server via adminserver console, i got the exception mentioned in
the subject.
can anyone help?
regards
marco
can anyone point me to the right direction for solving this problem?
in the adminserver console i have defined a machine for teh managedserver, and
nodemanager is supposed to run at localhost:5555 (and indeed it does, because
ihave started it successfully).
thanx in advance and regards marco

Marco.
Sorry, this is not a solution to your problem but i am trying to solve the same
problem for a week now.
I have wl7.0 sp2, 1 admin server, 2 managed servers on the same box. I get the
same error. I know that the default certificate installed provides a hostname
verification of weblogic.com. I turned the hostname verification off, i put in
the Dweblogic.nodemanager.sslHostNameVerificationEnabled=false, i get the same
error when starting the managed server. I went ahead and created my own certificate
for machine called mallik, created my own passphrase, created a new keystore,
made the admin server view the keystore, used the same certificate for both the
admin server and the node manager. It still fails with the same error. I went
ahead and added the machine 'mallik' to nodeManager.hosts file. It fails. I am
totally confused now what needs to be done.
My nodeManger.hosts looks like this:
mallik 10.100.10.130
managedServer1 10.100.10.130
managedServer2 10.100.10.13
Below is the startNodeManager.cmd.
@echo off
@rem *************************************************************************
@rem This script can be used to start the WebLogic NodeManager
@rem
@rem This script sets the following variables before starting the NodeManager:
@rem
@rem WL_HOME - The root directory of your WebLogic installation.
@rem NODEMGR_HOME - The home directory for this NodeManager instance.
@rem JAVA_HOME - Location of the version of Java used to start WebLogic
@rem Server. This variable must point to the root directory of
@rem a JDK installation and will be set for you by the
@rem installer. See the WebLogic platform support page
@rem (http://e-docs.bea.com/wls/platforms/index.html) for an up-to-date
list of
@rem supported JVMs on Windows NT.
@rem PATH - Adds the JDK and WebLogic directories to the system path.
@rem CLASSPATH - Adds the JDK and WebLogic jars to the classpath.
@rem JAVA_OPTIONS - Java command-line options for running the server. (These
@rem will be tagged on to the end of the JAVA_VM and MEM_ARGS)
@rem JAVA_VM - The java arg specifying the VM to run. (i.e. -server,
@rem -client, etc.)
@rem MEM_ARGS - The variable to override the standard memory arguments
@rem passed to java
@rem
@rem *************************************************************************
SETLOCAL
set WL_HOME=C:\bea7.0\weblogic700
set NODEMGR_HOME=%WL_HOME%\common\nodemanager
set JAVA_HOME=C:\bea7.0\jdk131_06
Call %WL_HOME%\common\bin\commEnv.cmd
@rem If NODEMGR_HOME does not exist, create it
:checkNodeManagerHome
if exist %NODEMGR_HOME% goto checkJava
echo.
echo NODEMGR_HOME %NODEMGR_HOME% does not exist, creating it..
mkdir %NODEMGR_HOME%
@rem Check that java is where we expect it to be
:checkJava
if exist %JAVA_HOME%\bin\java.exe goto runNodeManager
echo The JDK wasn't found in directory %JAVA_HOME%.
echo Please edit this script so that the JAVA_HOME
echo variable points to the location of your JDK.
goto finish
:runNodeManager
if not "%JAVA_VM%" == "" goto noResetJavaVM
rem set JAVA_VM=-hotspot
set JAVA_VM=%COMM_VM%
:noResetJavaVM
if not "%MEM_ARGS%" == "" goto noResetMemArgs
set MEM_ARGS=-Xms32m -Xmx200m
:noResetMemArgs
@echo on
set CLASSPATH=.;%JAVA_HOME%\lib\tools.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%CLASSPATH%
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
cd %NODEMGR_HOME%
#"%JAVA_HOME%\bin\java.exe" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath "%CLASSPATH%"
"-Dbea.home=C:\bea7.0" "-Dweblogic.security.SSL.trustedCAKeyStore=%WL_HOME%\server\lib\cacerts"
"-Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy" "-Dweblogic.nodemanager.reverseDnsEnabled=true"
"-Dweblogic.nodemanager.javaHome=%JAVA_HOME%" weblogic.nodemanager.NodeManager
"%JAVA_HOME%\bin\java.exe" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath "%CLASSPATH%"
"-Dbea.home=C:\bea7.0" "-Dweblogic.security.SSL.trustedCAKeyStore=%WL_HOME%\server\lib\cacerts"
"-Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy" "-Dweblogic.nodemanager.certificateFile=C:\bea7.0\user_projects\myDomain\mallikcert.pem"
"-Dweblogic.nodemanager.sslHostNameVerificationEnabled=false" "-Dweblogic.nodemanager.javaHome=%JAVA_HOME%"
"-Dweblogic.ListenAddress=mallik" "-Dweblogic.nodemanager.nativeVersionEnabled=true"
"-Dweblogic.nodemanager.reverseDnsEnabled=true" "-Dweblogic.nodemanager.javaHome=%JAVA_HOME%"
"-Dweblogic.nodemanager.trustedHosts=%WL_HOME%\common\nodemanager\config\nodemanager.hosts"
"-Dweblogic.management.pkpassword=weblogic" weblogic.nodemanager.NodeManager
goto finish
:finish
ENDLOCAL
I would appreciate if anybody can help me.
Mallik.
"Marco" <[email protected]> wrote:
>
hi all, i am trying to start a managed server using nodeManager, but
i keep on
getting following exception:
weblogic.nodemanager.NodeManagerException: [Could not execute command
start for
server managedServer via the Node Manager - reason: [CommandInvoker:
Failed to
send command: 'online to server 'managedServer' to NodeManager at host:
'localhost:5555'
with exception FATAL Alert:HANDSHAKE_FAILURE - The handshake handler
was unable
to negotiate an acceptable set of security parameters.. Please ensure
that the
NodeManager is active on the target machine].] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeManagerRuntime.java:472)
at weblogic.nodemanager.NodeManagerRuntime.start(NodeManagerRuntime.java:76)
at
java.lang.reflect.Method.invoke(Native Method) at
here is my script for starting nodemanager
set JAVA_HOME=c:\bea\jdk131
set WL_HOME=c:\bea\weblogic700
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
set CLASSPATH=.;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar
java -hotspot -ms16m -mx16m -classpath %CLASSPATH% -Dbea.home=C:\bea\weblogic700
-Djava.security.policy=C:\bea\weblogic700\server\lib\weblogic.policy
-Dweblogic.nodemanager.weblogicHome=C:\bea\weblogic700
-Dweblogic.nodemanager.listenAddress=172.21.73.94 -Dweblogic.nodemanager.listenPort=5555
-Dweblogic.nodemanager.trustedHosts=C:\bea\weblogic700\common\nodemanager\config\nodemanager.hosts
-Dweblogic.nodemanager.certificateFile=C:\bea\weblogic700\common\nodemanager\config\demo.crt
weblogic.nodemanager.NodeManager
i have created an admin server, called adminserver
then i have created in the same domain a server called managedserver
both servers run on the same machine,at different port number.
i have created a machine, and associated managedserver to it.
in the machine/configuration/nodemanager i have set listenaddress localhost
and
listenport 5555.
my nodemanager starts automatically at htat port. however, when i try
to start
the managed server via adminserver console, i got the exception mentioned
in
the subject.
can anyone help?
regards
marco
can anyone point me to the right direction for solving this problem?
in the adminserver console i have defined a machine for teh managedserver,
and
nodemanager is supposed to run at localhost:5555 (and indeed it does,
because
ihave started it successfully).
thanx in advance and regards marco

Start managed servers via admin console

Hello,
I have installed weblogic server, created a domain, added a managed server. All working fine. Now I want to be able to start managed server through admin console.
According to this documentation (http://docs.oracle.com/cd/E13222_01/wls/docs81/adminguide/confignodemgr.html), it should all be pre-configured for development environment. But when i try start the managed server in admin console, it says "server does not have a machine associated with it." I added a machine and assigned that machine to the managed server, now it says "the Node Manager associated with machine m1 is not reachable.".
Can someone point to instructions on how to setup this on dev environment. In one of the instructions, it is suggested to change nodemanager.properties in common\nodemanager folder. But this file doesn't exist in my environment.
All i want is to start all admin and managed server with one script or with start the admin server and able to start the managed servers via console.
Thanks,

Hi,
Check from the console whether your node manager is reachable or not.
Console Path:
Machines -> <YOUR_MACHINE_NAME> -> Monitoring (tab) -> Node Manager Status (sub-tab) -> Status: Reachable
You Can follow the below link for "Node manager not reachable"
http://middlewaremagic.com/weblogic/?p=5205
Once done,check the status of the node manager.
Still even after this if the node manager is not reachable
Check the node manager logs,whether you get any exceptions
location $weblogic_home\wlserver_10.3\common\nodemanager\nodemanger.log
You can take help of the below link for trouble shooting the basic node manager exceptions.
http://middlewaremagic.com/weblogic/?p=2887
Or You can even paste the error's on this post itself,we will guide you .
Regards
FAbian

Adjustment Panel Auto Hide Configuration

Hi,
in Lightroom 3, it is very easy to accidentally hide the adjustment panels when trying to scroll them up or down.
This happens when one attempts to click on the adjustment panel slider but instead accidentally hits the area immediately to its right, referred to as "Adjustment Panel Auto Hide Area" in the following discussion. This area shows a little arrow and is used to hide and show the adjustment panels.
Usability improvement suggestions:
1) Allow the user to disable the auto-hide feature of the adjustment panel via Edit / Preferences... / Interface / Adjustment Panel.
2) Dito, but configuration of the auto-hide feature via a new entry in the context-sensitive menu of the Adjustment Panel Auto Hide Area. The menu could offer a new checkbox "Auto Hide Toggle". If enabled, the current default behaviour is active and a left click in the Adjustment Panel Auto Hide Area shows or hides the Adjustment Panel. If disabled, a left click has no effect.
In my workflow, I use two screens. One screen shows the image in full size, the other one shows the various adjustment panels which I never switch off. I just scroll them up or down. Being able to toggle the current default behaviour would make the product more usable to me.
Thanks
Christian

That is great!! I have done every steps of the tutorial but I have a problem:
When I hide the playbar, the animation is paused and when the mouse is over the playbar , the animation continue.
What do you think about it?
Regards

Workflow Manager Configuration Issue Windows Server 2012 R2 / SQL 2014

Hello All,
Environment: SharePoint 2013 Enterprise with SP1
Farm consists of
2 App Server, 2 Web Server and 2 SQL Servers all the server have Windows 2012 R2
OS . The SQL backend is SQL Server 2014
Installed Workflow manager on the Web server, the configuration ran fine without any errors. Trying to browse the workflow management site via IIS Manager encountered Certificate Error clicked Continue to this website which gives a HTTP 403 Forbidden and
following detail message
This error (HTTP 403 Forbidden) means that Internet Explorer was able to connect to the website, but it does not have permission to view the webpage.
Checked the web site Workflow Management Site in the IIS manager which has only one folder bin . I was not able to submit the Screenshot
I have installed the latest patch for the Workflow manager and the Service Bus
Question I have
Should there be more folder under the Workflow Management Site.
Why is the Web site not showing the web page
Is workflow manager supported for Windows Server 2012 R2 and SQL 2014
Thanks
Dhanraj

Hi Dhanraj,
I captured the screenshot from my IIS Manager on workflow server. There is only bin folder under Workflow Management site
If I browser workflow host uri from IIS Manager
https://localhost:12290, I received certification error, and I chose the continue to this website, it returned me as follow:
From the link: http://support.microsoft.com/kb/2902007/en-us It is supported on Windows Server 2012 r2 if you have install latest update.
Here is an article which talks about error:
http://www.sp2013blog.com/Lists/Posts/Post.aspx?ID=36
In addition, here is the reference for troubleshooting workflow manager 1.0 management:
http://msdn.microsoft.com/en-us/library/jj193529(v=azure.10).aspx#AnalyzingWorkflowManagementLogs
You could also open SharePoint Designer 2013 and see if you could create a workflow on platform 2013.
Regards,
Rebecca Tu
TechNet Community Support

Retrieve UM Auto Attendant configuration

in
this-link there are many shell commands for editing UM Auto Attendant configuration ,
but there are no commands for retrieve the same information ... is EWS API is the answer?
I'm trying with C# / shell commands to get these information
How I :
get UMAutoAttendant Business Hours ?
get Business Hours Greeting ?
etc...
for example you can change business hours schedule , but you can't get the same data
Set-UMAutoAttendant -Identity MyUMAutoAttendant -BusinessHoursSchedule 0.10:45-0.13:15,1.09:00-1.17:00,6.09:00-6.16:30
I wanna retreive the same information
0.10:45-0.13:15,1.09:00-1.17:00,6.09:00-6.16:30
the only thing i can get is
[PS] C:\Windows\system32>Get-UMAutoAttendant -Identity ZakosUM
Name UMDialPlan PilotIdentifierList SpeechEnabled Status
ZakosUM DP {} True Enabled
thanks

You can execute the cmdlets from Managed code using Remote powershell
http://msdn.microsoft.com/en-us/library/office/ff326159(v=exchg.140).aspx
eg
System.Security.SecureString secureString = new System.Security.SecureString();
foreach (char c in Password)
secureString.AppendChar(c);
PSCredential credential = new PSCredential(AdminUserName, secureString);
WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("https://" + PSServerName), "http://schemas.microsoft.com/powershell/Microsoft.Exchange", credential);
connectionInfo.AuthenticationMechanism = AuthenticationMechanism.Basic;
connectionInfo.SkipCACheck = true;
connectionInfo.SkipCNCheck = true;
connectionInfo.MaximumConnectionRedirectionCount = 4;
Runspace runspace = System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(connectionInfo);
runspace.Open();
Pipeline plPileLine = runspace.CreatePipeline();
Command gmUMAutoAttendant = new Command("Get-UMAutoAttendant");
gmUMAutoAttendant.Parameters.Add("Identity", "test");
plPileLine.Commands.Add(gmUMAutoAttendant);
Collection<PSObject> RsResultsresults = plPileLine.Invoke();
foreach (PSObject obj in RsResultsresults)
PSObject bhs = (PSObject)obj.Properties["BusinessHoursSchedule"].Value;
ArrayList bhsObj = (ArrayList)bhs.BaseObject;
foreach(String Element in bhsObj){
Console.WriteLine(Element);
plPileLine.Stop();
Cheers
Glen

Is local EAP + Web Authentication possible in Auto Anchor Configuration

Hi,
I have a wireless network setup in an auto-anchor configuration with the foreign and anchor controllers. Due to the foreign controller being owned and managed by another company, I have an interesting authentication scenerio I would like to acheive. We can't implement full EAP-TLS as we would have to allow authentications from the foreign controller which is owned and managed by another company.
Currently Web Authentication is working correctly for the Wireless Network. As another layer of security, I want to know if its possible for the wireless clients to trust a certificate installed on the foreign controller? If so, are you able to point me in the direction of a user guide to implement.
I found the following document which describes local EAP configuration . Would this work with Web Authentication?
Thanks

so, kinda but no. EAP is a layer 2 authentication that uses encryption as well.
WebAuth is a layer3 authentication only.
Now the kinda....you can create guest/network users on the WLC local database, and if someone logins to the webauth portal with those credentials they will be able to get on.
I'm not really sure what you are looking to do based on your post.
Personally, if I had users that were going to roam to this controller, I'd work with that companies IT and get it linked to my AAA server and keep the EAP-TLS that I had working already going. Just because that WLC would be able to communicate to your AAA doesn't mean their users would be able to get on, as they wouldn't have the machine or client certificate nor the Root CA cert on their machines.
HTH,
Steve

Lion Server Profile Manager Configuration

Hi Guys,
Currently have been testing Lion Server and Profile Manager Configuration.
So Far Have setup
Lion with Server App and Server Admin Tools
Configured Open Directory Master and enabled SSL on LDAP
Once Configured OD has created a CA Certificate can use for Profile Manager
Have Enabled in Server.app Web and Profile manager
In SSL Certificate Configuration have set CA Certificate for Web and Enabled Apple push notifications with my apple ID
In Profile Manager Enabled Device Management and Enabled Sign configuration profiles and selected CA Open Directory Certificate Created when setting up OD Master.
On Server Originally could install Trust Profile OK and Enroll Server OK with no issues, but on any other 10.7 Devices could install Trust Profile OK but would always say unsigned and Enroll would never work or just hang.
Now Since Played around with settings on 10.7 Server can no longer enroll but trust OK.
Questions have is
For SSL and Profile Manager to work properly as well as Certificates do you require to purchase a proper SSL Certificate or can we use the OD Master Certificate that gets created. All we are testing is on the Local LAN so don't want to get a SSL certificate from the internet.
Also why cannot 10.7 clients trust profile and enroll Devices Properly? How do I get this working properly?
Any ideas?
Regards,
Shane

taubmas wrote:
Not sure if its that as finally got Lion Server working on a VM setup so network shouldn't be an issue...
Had 1 OSX Lion Server VM and 1 OSX Lion Client VM and OSX Lion Server VM gets profile and enrolls device fine but again OSX client doesn't get enroll just sits again at installing..... even if set keychain to trust and make trust profile verified..
any other ideas? I think need to somehow get the server to trust trust profile by default instead of going to keychain all the time.
Shane
Did you get this to work in an ESXI envrionment? If so, which version are you running?

Failed to Install the "Oracle Web Services Manager Configuration Assistant"

The installation of "Oracle Web Services Manager Configuration Assistant" was failed when I installed the "Oracle SOA Suite 10.1.3.1.0" ,and the failure information about the installation in the log show as follows, I need your help,thanks a lot!
start-olite:
Starting OLite in background ...
Running:D:\product\10.1.3.1\OracleAS_1\integration\esb\sql\other\wfeventc.sql
Exception in thread "main" oracle.tip.esb.install.exception.InstallationDBException: Failed to execute sql file"D:\product\10.1.3.1\OracleAS_1\integration\esb\sql\other\wfeventc.sql"
     at oracle.tip.esb.install.db.RunSQLScript.runScript(Unknown Source)
     at oracle.tip.esb.install.db.RunSQLScript.runScriptListInternal(Unknown Source)
     at oracle.tip.esb.install.db.RunSQLScript.runScriptList(Unknown Source)
     at oracle.tip.esb.install.db.NonOracleDB.runScripts(Unknown Source)
     at oracle.tip.esb.install.db.OLite.install(Unknown Source)
     at oracle.tip.esb.install.db.InstallerMain.main(Unknown Source)
Caused by: java.sql.SQLException: [POL-3023] ????????
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinDriverConnect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.connect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCFactory.createConnection(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.OracleConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCDriver.connect(Unknown Source)
     at oracle.tip.esb.install.db.DriverManagerDataSource.getConnection(Unknown Source)
     ... 6 more
Java Result: 1
Importing Default System ...
${env.PCHOME}
stop-olite:
Stopping background OLite process ...
CA::DEBUG:******:Finished OLite Install ...
Finished Olite configuration ...
BUILD SUCCESSFUL
Total time: 12 seconds
Exit: 0
TASK: oracle.tip.esb.install.tasks.ConfigureOC4J
Configuring OC4J ...
id value is 2
id value is IASPT
process-type value is 1
id value is 3
id value is IASPT
id value is 3
id value is ASG
process-type value is 1
id value is 2
id value is ASG
id value is 1
id value is default_group
process-type value is 1
id value is 3
id value is home
process-type value is 1
process-type value is 2
process-type value is 1
final map size value is 2
id value is -Xrs -server -XX:MaxPermSize=128M -ms512M -mx1024M -XX:AppendRatio=3 -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false
Jun 22, 2010 2:39:09 PM oracle.tip.esb.install.tasks.ConfigureOC4J getOpmnRequestPort
INFO: Port value is 6003
D:\product\10.1.3.1\OracleAS_1\jdk\bin\java -Dant.home=D:\product\10.1.3.1\OracleAS_1\ant -classpath D:\product\10.1.3.1\OracleAS_1\ant\lib\ant.jar;D:\product\10.1.3.1\OracleAS_1\ant\lib\ant-launcher.jar;D:\product\10.1.3.1\OracleAS_1\integration\esb\lib\ant-contrib-1.0b1.jar org.apache.tools.ant.Main -Dinstall.type=SoaBasic -Desb.home=D:\product\10.1.3.1\OracleAS_1\integration\esb -Doc4j.home.dir=D:\product\10.1.3.1\OracleAS_1 -Djava.home=D:\product\10.1.3.1\OracleAS_1\jdk -Doracle.home=D:\product\10.1.3.1\OracleAS_1 -Dhost.name=dpxc67-01 -Ddb.vendor=olite -Dimport.export.db_url=jdbc:polite4@localhost:1531:oraesb -Desb.appserver=ias_10.1.3 -Doc4j.design_time_host=dpxc67-01 -Doc4j.design_time_port=8888 -Dprimary.container=home -Dinstall.mode=OracleInstallerias_10.1.3_SoaBasic -Dsso=true -Dinstall.component=install-developer -Dias.name=soademo.dpxc67-01 -Denv.OC4J_STANDALONE_HOME=D:\product\10.1.3.1\OracleAS_1 -Dias_admin.password=*password cannot be displayed* -Denv.JAVA_HOME=D:\product\10.1.3.1\OracleAS_1\jdk -Denv.SERVER_ADMIN_PASSWORD=*password cannot be displayed* -Dopmn.requestport=6003 -Ddb.vendor=olite -Ddb.connect.string=jdbc:polite4@localhost:1531:oraesb -Ddb.username=system -Dias.virtual_host=dpxc67-01 -Denv.DB_USER=system -Denv.DB_URL=jdbc:polite4@localhost:1531:oraesb -Desb.oc4j.container=home -Denv.DB_PASSWORD=*password cannot be displayed* -Ddb.password=*password cannot be displayed* -e -buildfile esbinstall.xml deploy-applications
Buildfile: esbinstall.xml
Trying to override old definition of datatype echoproperties
common_update_server.xml:
Adding shared library apache.junit ...
Adding shared library oracle.db.lite ...
Adding shared library apache.commons 10.1.3 ...
Adding shared library apache.jdom ...
Adding shared library apache.slide ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://dpxc67-01:6003/home -script D:\product\10.1.3.1\OracleAS_1\integration\esb\install\ant-tasks/esb_admin_client_script_sl.txt
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
update_server.xml:
Adding shared library oracle.esb ...
deployer.url: deployer:oc4j:opmn://dpxc67-01:6003/home
publishSharedLibrary command was successful
deploy-applications:
Deploying ESB design time ...
Binding ESB design time ...
Deploying ESB run time ...
Binding ESB runtime ...
Deploying orainfra.ear ...
Binding orainfra ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://dpxc67-01:6003/home -script D:\product\10.1.3.1\OracleAS_1\integration\esb\install\ant-tasks/esb_deployapps.txt
10/06/22 14:39:20 Notification ==>Application Deployer for esb-dt STARTS.
10/06/22 14:39:20 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear
10/06/22 14:39:20 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear begins...
10/06/22 14:39:20 Notification ==>Unpacking esb-dt.ear
10/06/22 14:39:21 Notification ==>Done unpacking esb-dt.ear
10/06/22 14:39:21 Notification ==>Unpacking esb_console.war
10/06/22 14:39:22 Notification ==>Done unpacking esb_console.war
10/06/22 14:39:22 Notification ==>Unpacking esb-jca-dt.rar
10/06/22 14:39:22 Notification ==>Done unpacking esb-jca-dt.rar
10/06/22 14:39:22 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear ends...
10/06/22 14:39:22 Notification ==>Starting application : esb-dt
10/06/22 14:39:22 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:22 Notification ==>Initializing EJB container
10/06/22 14:39:22 Notification ==>Loading connector(s)
10/06/22 14:39:22 Notification ==>Starting up resource adapters
10/06/22 14:39:23 Notification ==>Warning. Unable to set up connection factory to location esb-dt for a resource adapter in {1}
10/06/22 14:39:23 Notification ==>Initializing EJB sessions
10/06/22 14:39:23 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initialize esb_console begins...
10/06/22 14:39:23 Notification ==>Initialize esb_console ends...
10/06/22 14:39:23 Notification ==>Started application : esb-dt
10/06/22 14:39:23 Notification ==>Application Deployer for esb-dt COMPLETES. Operation time: 2875 msecs
10/06/22 14:39:23 Notification ==>Application Deployer for esb-rt STARTS.
10/06/22 14:39:23 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear
10/06/22 14:39:23 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear begins...
10/06/22 14:39:23 Notification ==>Unpacking esb-rt.ear
10/06/22 14:39:23 Notification ==>Done unpacking esb-rt.ear
10/06/22 14:39:23 Notification ==>Unpacking provider-war.war
10/06/22 14:39:23 Notification ==>Done unpacking provider-war.war
10/06/22 14:39:23 Notification ==>Unpacking esb-jca-rt.rar
10/06/22 14:39:23 Notification ==>Done unpacking esb-jca-rt.rar
10/06/22 14:39:23 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear ends...
10/06/22 14:39:23 Notification ==>Starting application : esb-rt
10/06/22 14:39:23 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initializing EJB container
10/06/22 14:39:23 Notification ==>Loading connector(s)
10/06/22 14:39:23 Notification ==>Starting up resource adapters
10/06/22 14:39:23 Notification ==>Warning. Unable to set up connection factory to location esb-rt for a resource adapter in {1}
10/06/22 14:39:23 Notification ==>Initializing EJB sessions
10/06/22 14:39:23 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initialize provider-war begins...
10/06/22 14:39:23 Notification ==>Initialize provider-war ends...
10/06/22 14:39:23 Notification ==>Started application : esb-rt
10/06/22 14:39:23 Notification ==>Application Deployer for esb-rt COMPLETES. Operation time: 203 msecs
10/06/22 14:39:24 Notification ==>Application Deployer for orainfra STARTS.
10/06/22 14:39:24 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear
10/06/22 14:39:24 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear begins...
10/06/22 14:39:24 Notification ==>Unpacking orainfra.ear
10/06/22 14:39:24 Notification ==>Done unpacking orainfra.ear
10/06/22 14:39:24 Notification ==>Unpacking orainfra.war
10/06/22 14:39:24 Notification ==>Done unpacking orainfra.war
10/06/22 14:39:24 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear ends...
10/06/22 14:39:24 Notification ==>Starting application : orainfra
10/06/22 14:39:24 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:24 Notification ==>Initializing EJB container
10/06/22 14:39:24 Notification ==>Loading connector(s)
10/06/22 14:39:24 Notification ==>Starting up resource adapters
10/06/22 14:39:24 Notification ==>Initializing EJB sessions
10/06/22 14:39:24 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:24 Notification ==>Initialize orainfra begins...
10/06/22 14:39:24 Notification ==>Initialize orainfra ends...
10/06/22 14:39:24 Notification ==>Started application : orainfra
10/06/22 14:39:24 Notification ==>Application Deployer for orainfra COMPLETES. Operation time: 219 msecs
dehydrationStore:
Configuring data sources for olite dehydration store ...
${env.PCHOME}
install-developer:
design time host dpxc67-01
design time port 8888
primary container home
the host is dpxc67-01and the port is 8888
Exception in thread "main" oracle.tip.esb.install.exception.InstallationDBException: Connection Refused ""
     at oracle.tip.esb.install.db.NonOracleDB.runConnectionTest(Unknown Source)
     at oracle.tip.esb.install.db.NonOracleDB.load(Unknown Source)
     at oracle.tip.esb.install.ESBInstaller.setupDB(Unknown Source)
     at oracle.tip.esb.install.ESBInstaller.handleDesignTimeSpecificActions(Unknown Source)
     at oracle.tip.esb.install.ESBInstaller.main(Unknown Source)
Caused by: java.sql.SQLException: [POL-3023] ????????
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinDriverConnect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.connect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCFactory.createConnection(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.OracleConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCDriver.connect(Unknown Source)
     at oracle.tip.esb.install.db.DriverManagerDataSource.getConnection(Unknown Source)
     ... 5 more
Java Result: 1
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\lib\ext
set_app_sso_option:
Using sso=true. Redeploying esb-dt with sso
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt\META-INF
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\application-deployments\esb-dt

It could be due to system language setting -
install SOA Suite failed
Regards,
Anuj

I can not startup Managed server via admin server

Admin server ip:172.16.219.25
Admin server name:nstwssadm1.webex.com
Managed server ip:172.16.219.189
Managed server name:nstwss001.webex.com.
I can start Managed server in comand line like 'startManagedWebLogic.sh nstwss001-s1 t3s://nstwssadm1.webex.com:9002'
But, I can not startup Managed server in console, it appears following log:
=========
<Jun 29, 2006 8:56:16 AM EDT> <Info> <NodeManager@*.*:5555> <Starting Server nst1::nstwss001-s1 ...>
<Jun 29, 2006 8:56:16 AM EDT> <Info> <NodeManager@*.*:5555> <BaseProcessControl: saving process id of WebLogic Managed server 'nstwss001-s1', pid: 11072>
<Jun 29, 2006 8:56:19 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_08 JVM R24.5.0-61 Version ari-49095-20050826-1856-linux-ia32 from BEA Systems, Inc.>
<Jun 29, 2006 8:56:19 AM EDT> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at https://172.16.219.25:9002 to check if there exists a running admin server at this URL.>
<Jun 29, 2006 8:56:20 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
<Jun 29, 2006 8:56:20 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
<Jun 29, 2006 8:56:21 AM EDT> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Jun 29, 2006 8:56:21 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358
WebLogic XMLX Module 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358 >
<Jun 29, 2006 8:56:21 AM EDT> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server https://172.16.219.25:9002 to retrieve the initial configuration.>
<Jun 29, 2006 8:56:22 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/bea/weblogic81/common/nodemanager/nstwss001-s1/nstwss001-s1.log is opened. All server side log events will be written to this file.>
<Jun 29, 2006 8:56:23 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
<Jun 29, 2006 8:56:23 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
<Jun 29, 2006 8:56:26 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
<Jun 29, 2006 8:56:26 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
<Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias DemoIdentity from the jks keystore file /opt/bea/weblogic81/server/lib/DemoIdentity.jks.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.'
Reason: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.
<Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias DemoIdentity from the jks keystore file /opt/bea/weblogic81/server/lib/DemoIdentity.jks.>
<Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
<Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
<Jun 29, 2006 8:56:28 AM EDT> <Warning> <NodeManager> <BEA-300038> <The node manager is unable to monitor this server. Could not create an SSL connection to the node manager. Reason : localhost>
<Jun 29, 2006 8:56:28 AM EDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.>
===============================
Who can help me on it?
Thanks.

your error says:
'his server is unable to establish a connection to the <b>node manager</b>'
check that your node manager is running when you try to start de manage server.

Workflow Manager Configuration Wizard is not working with USER ID

Hello everyone,
I
have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine that is hosting Sharepoint 2013. I attempt to go into the Workflow Manager Configuration. That comes up and asks me if I want to Create
new farm with Default Settings, New Farm with custom settings, or existing farm. I've tried both Default settings AND Custom settings.
            When
the configuration wizard comes up, I attempt to fill out the necessary information. It seems to connect to the SQL server without a problem. I only run into an issue when setting the USER ID. The program totally freezes up and force closes.
            I
have verified that the USERID is in the correct format and tried multiple different formats. The problem is that the moment I move the cursor from the USERID field to ANY other field, the program force closes. I'm not able to hit submit, I'm not
able to change any other options. The moment USERID is manipulated or the cursor LEAVES the USERID field, the program force closes. It won't even allow me to put in a password before it force closes.
             Customer
domain is running in Windows Server 2003 Enterprise Edittion SP2.
Any
ideas?
I have installed also cumulative update to avoid crash but still I am getting force to close workflow wizard. I have used users which are already added in administrator groups.
We are using 3 tier architecture for Sharepoint 2013.
Also we have made Alias of Domain controller. Eg:-Alias is "labs" for domain "xyz.ab.com".
And we are using labs\spadmin and labs\spservice for Workflow Manager Configuration 1.0
Is there any issue with Domain Alias "labs" as Workflow gives error "Specified RunAs account is invalid" or "Force close the application".
  I
have copied the errors from event viewer below:
APPLICATION
ERROR
Faulting
application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965,
time stamp: 0x506dcae6
Exception code: 0xe0434352
Fault offset: 0x000000000000bccd
Faulting process id: 0x17f8
Faulting application start time: 0x01cddee198ece72e
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
.NET
Runtime Error
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Thanks
Hansraj Rathva

Check to ensure that the user you're running the wizard as has access to the Users and Computers folders in Active Directory. I had trouble with the "specified RunAs account is invalid" message, and when I granted the AD rights, I was able to proceed.
The issue would be that the user executing the wizard isn't able to query AD to look up the specified user. The RunAs account you're specifying is probably fine.

Workflow Manager Configuration - Certificate with Thumbprint does not have a private key

After following the video series on how to install and Configure Workflow Manager into SharePoint 2013 http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx,
I get to the 'Configure Certificates' section in the Workflow Manager Configuration: I browse to our wildcard certificate and select it.
When I try to move to the next page of the configuration wizard, I get the following red error under the certificate:
Certificate with thumbprint LONG STRING does not have a private key.
I checked the properties of the certificate, and it says: You have a private key that corresponds to this certificate.
What am I missing??
Thank you.
macrel

Hi,
According to your post, my understanding is that you got error under the certificate.
Please make sure you configure the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Installing and Configuring Workflow Manager 1.0
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Enterprise manager configuration error: error instantiating OC4J Files

Good day to all.
Its my first time to install Oracle 11g on my Windows 7 computer.
After i installed and configured the database, i get this following error , so i can't go through the Enterprise Manager.
Enterprise Manager Configuration failed due to the following error - Error instantiating OC4J Configuration files
So i checked the emConfig.log for error details, and i found out that i have some several files missing, in which i checked the folder also.
I don't know why these files are missing.
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at java.io.FileReader.<init>(FileReader.java:41)
     at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:296)
     at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1297)
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml in searching for tag rmi-server with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml in searching for tag web-site with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.util.FileUtil setAttributeInXML
CONFIG: Stack Trace:
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMDBCConfig instantiateOC4JConfigFiles
CONFIG: Failed to set value in server.xml for application-server tag
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating OC4J configuration files
Refer to the log file at C:\app\ROMMEL\cfgtoollogs\dbca\RommelDB\emConfig.log for more details.
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error instantiating OC4J configuration files
     at oracle.sysman.emcp.EMDBCConfig.performConfiguration(EMDBCConfig.java:427)
     at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:174)
IT seems that the folder OC4J_DBConsole\config\ does not contain any xml files.!
Prior to this, i get some files that are not found error when running the SETUP, there are several of them, i just pressed CONTINUE in
order to finish the installation.
Hope anyone can give me a good advice and help so that i can start to run Enterprise Manager and to learn how to get around with database creation and configuration
Im a total newbie in Oracle, so any help would be greatly appreciated.
Thank you very much.

Hello.
I have successfully installed Microsoft Loopback adapter.
I checked out the installation logs in the Logs directory, i can the error log (oraInstall2012-06-05_12-36-49PM.err) . which contains many errors:
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup19.jar (The system cannot find the path specified)
AND lots of .jar and .rsf files missing.
What should i do next?
Thank you.

Auto-Managed configurations via WLSE 2.15

Similar Messages

Maybe you are looking for