Auto mounting stoped working after last round of updates
I run kde and I use testing, since the last time I used my usb stick auto mounting doesn't work. I get
mount: can't find /dev/sdb1 in /etc/fstab or /etc/mtab
I tried a DVD doesn't work anymore either
I searched the forum didn't find anything. Any suggestions.
Yes, the new kernel breaks HAL, it'll be fixed
skottish wrote:It happened to quite few people including me. It's already mentioned in a few other threads so I'll bet the devs know. I just reverted for now.
How do you revert back?
Similar Messages
-
Kdm stopped working after last kdebase-workspace update
The problem is that when I try to log in via kdm screen gets black and I'm returned to kdm.
It's caused by ConsoleKit (anyway, why should I have to use HAL and ConsoleKit?!), because after rebuilding kdebase-workspace without consolekit it works agian. Anyway, should I add this as a bug report?
Xorg.0.log seems fine, but the end is little bit different than usually.
Normal Xorg.0.log:
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
Xorg.0.log after upgrade:
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Mouse0)
(II) evaluating device (Keyboard0)
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
[config/dbus] couldn't register object path
(II) UnloadModule: "kbd"
(II) UnloadModule: "mouse"
daemon.log
Jan 7 10:05:19 red_dragon console-kit-daemon[2135]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:19 red_dragon console-kit-daemon[2206]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:21 red_dragon console-kit-daemon[2359]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:21 red_dragon console-kit-daemon[2424]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:21 red_dragon console-kit-daemon[2492]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:21 red_dragon console-kit-daemon[2557]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:21 red_dragon console-kit-daemon[2623]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:31 red_dragon kdm_greet[3350]: Cannot open default user face
Jan 7 10:05:36 red_dragon kdm: :0[3349]: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0
Jan 7 10:05:36 red_dragon kdm: :0[3349]: Client start failed
Jan 7 10:05:36 red_dragon kdm: :0[3349]: Cannot close ConsoleKit session: Unable to close session: no session open
Jan 7 10:05:36 red_dragon console-kit-daemon[3365]: CRITICAL: cannot initialize libpolkit
Jan 7 10:05:39 red_dragon kdm_greet[3432]: Cannot open default user face
errors.log
Jan 7 10:05:31 red_dragon kdm_greet[3350]: Cannot open default user face
Jan 7 10:05:36 red_dragon kdm: :0[3349]: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0
Jan 7 10:05:36 red_dragon kdm: :0[3349]: Client start failed
Jan 7 10:05:36 red_dragon kdm: :0[3349]: Cannot close ConsoleKit session: Unable to close session: no session open
Jan 7 10:05:39 red_dragon kdm_greet[3432]: Cannot open default user face
ConsoleKit/history
1231319119.043 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
1231319119.497 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
1231319121.089 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
1231319121.108 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
1231319121.166 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
1231319121.190 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
1231319121.213 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
1231319136.715 type=SEAT_ADDED : seat-id='Seat1' seat-kind=0
Last edited by 6xx (2009-01-07 11:53:14)As Jan de Groot (JGC) comments on http://bugs.archlinux.org/task/12702
the permissions and groups for /usr/lib/dbus-1.0/dbus-daemon-launch-helper should show up like this:
-rwsr-x--- 1 root dbus 46056 2008-11-28 20:35 /usr/lib/dbus-1.0/dbus-daemon-launch-helper
I changed mine and now kdm works fine:
# chown root:dbus /usr/lib/dbus-1.0/dbus-daemon-launch-helper
# chmod u+s /usr/lib/dbus-1.0/dbus-daemon-launch-helper -
FB Its not working after last up date
My FB app stoped working after last up date
My Bill Dance app stops working when you click on fishopedia after update
Man are all the apps crap tooWelcome to the Forums!
First try a Safe Boot... holding Shift key down at bootup.
If that doesn't help...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Repair Permissions and reboot. -
Font Auto-Activation Not Working After First Use
Anyone else seeing this problem, or have a fix? Font auto-activation stops working after the first use. Here's what happens: Open a file that contains a font that is installed, but is disabled in Font Book. The dialog box "Application wants to use the font XXX". Click on Allow. The font will be available, as you expect. Now quit the application. Open the file again - you won't get the dialog box asking permission to use the font, and the font is not available. This happens in Pages 3.0.1 and TextEdit 1.5. It happens for each individual font - in other words, continuing my description, if you now open a second file that has another font that is disabled in Font Book, you'll be asked permission to use it. But once you've allowed a particular font to be used, you won't be asked permission again.
Make a backup. Restore the device as new. Test the issue again. If it persists, your device needs service. If the issue disappears, restore your backup. If it then reappears, then there is some form of corrupt data on the device from the backup. You'll have to restore that data one portion at a time to determine what is causing it, or set up the device as new.
-
Blackberry stoped working after being droped.
Blackberry stoped working after being droped.
Hi and Welcome to the Forums!
Please open a new thread in the forum for your specific device so that those experts can help you:
http://supportforums.blackberry.com/rim/?category.id=Smartphones
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
also there's weird blank space before address in address bar
other extensions and addons seem to be running fine.jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man
-
IMac doesn't work after last software update
After last Apple software update (new Safari and security stuff), my iMac 20"/2GHz enters in an on/off loop. It starts but it doesn't manage to load the OS, it shuts off, it restarts, it shuts off and so on.
Does anybody have the same problem?
ThksWas your update download interrupted in any way? if so, then the computer is trying to find the downloaded files and because the download wasn't completed then it's causing the loop. That's exactly what happened to me. My computer was shutting off intermittent and it did on an update download, so it caused a loop at that's now your case, then never mind.
-
WD Mybook Thunderbolt Duo stop working after 10.9.4 update.
WD Thunderbolt Duo stop working after 10.9.4 update.
The drive does not show in disk Utility & WD utility, but it show at System information. Restart does not help,
MBP 15' early 2011.Only thunderbolt available, check on some forum, it could be my MBP's thunderbolt port problem.
I'm living in Malaysia, there are no apple store, only authorised seller, it will take weeks to repair... which is a big issue for me, -
Epson printer driver no longer working after 10.4.11 update
It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
WolfgangI just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000. -
after last HP printer update, my hp business 2800 won't print but instead crashes all programs. OS 10.6.8.
Use this driver:
http://support.apple.com/kb/DL907 -
Illustrator tools dropdown is not working after the recent software update
My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.
Same problem here. I have a Mac with a recent Yosemite update.
-
Drobo not working after 10.5.8 update
My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.
'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7 -
External monitor Syncmaster 2494SW not working after 10.6.7 update
External monitor Samsung Syncmaster 2494 SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
Safemode boot, SMC reset, PRAM reset did not help.
Exactly the same setup works perfectly under 10.6.6.HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
WHAT TO DO TO FIX:
Go to => System Preferences => Energy Saver => change graphic settings to Higher Performace.
Cheers!! -
Trackpad not working after 10.8.4 update
Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.
Apple store genius bar appointment is the best option for a positive resolution.
Ciao. -
Imessage doesn't work after ios 6.0 update.
My imessage doesn't work after ios 6.0 update. The white bar fills up until just a little slicer is left and then it says message failed.
*sliver of the white bar.
Maybe you are looking for
-
Help on purchasing a dvd camcorder to work with imovie
hello out there...was wondering which camcorder that has a dvd burner works best with imovie and osx...i want a sony, but i thought the small dvd's did not work on osx. presently, i have a digital8 and use a firewire connection to ingest video for ed
-
Just to clarify: I purchased some of my older music in iTunes with an account that got deleted. I cannot recover or use this old account. I transferred music from my old iTunes to a new computer and that new iTunes on the new computer is asking me to
-
For many years now I've always had the same Adobe ID. I've had different hardware, replacing stuff that became obsolete or that self-destructed. All the items in question were purchased by me from the same vendor (ibs.it). However, it's possible they
-
How to Suppres a Row in Cross Tab?
Hello All I have a cross tab where I wish only to show the result of the calculation. The cross tab is like this Header............Period Sales..............X Costs..............Y Cost/Sales.......Y/X What I want to show is the result only Cost/Sales
-
Salut! The scenario is "Find bookmark existed before and recall which bookmarkfolder it is in" Please note the "folder" is for "bookmarks", NOT a file folder of HDD-filesystem 1) I pressed Menu\Bookmarks\ShowAllBookmarks to open bookmarks organizer.