Auto open Macro

Hi there,
Do you know of a way or an OSS nte available that can help us with the auto open macro function in DMS. We have created a spreadsheet and added a macro which pops up when you open the spread sheet and prompts you to make a selection of what functions you want on the tab. After selection, it creates a form for you based on your selection. We have attachen this document in DMS but when open it up in change mode, the macro is not coming up to give the user the option of what to select in order to get the relevant form.
Please assist.
Thanks,
Patrick

Dear Patrick,
please check in transaction DC30 which parameter you have entered under 'Define Workstation Application in network' for the used workstation application.
I would recommend you to maintain here the parameter %AUTO% for the used workstation application.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Similar Messages

XL Auto Open not needed

Hi All,
When trying to save a report in excel, and we choose the path where the file is to be saved, Excel run the Auto Open Macro. ¿How we avoid that?. It is not needed at all. We just need to save the file in the path chosen, and the work with that file later on.
Thanks in advance,
Regards.

Hi,
Thanks for your reply.
I already did that, I remove AutoOpen.xls from the path we use for Excel Folder, and it still popping up. It's been happening recently, since last week. It's giving messages like AutoOpen is locked for another user, even when the file is already saved.
Any Ideas? We need to save files without Auto Open, like before.
Regards.

Auto-open different forms selectively

I want to be able to open Form1 when I open my Access application manually (double-clicking it) but Form2 instead when opening it from a scheduled task (to auto-run/schedule a process on Form2 that I also want to be able to run manually after navigating
there from Form1).
When I run Form2 via a button click on Form1, I pass OpenArgs "Manual". The code in Form2 runs automatically if Nz(OpenArgs,"Manual") = "Automatic"; that is , it runs automatically only if OpenArgs tells it to. So far, so good.
Auto-starting Form2 was also easy. I could not just open Form2 directly from a macro because (at least as far as I can tell) there is no OpenArgs option for OpenForm in a macro; however, I just created a macro that uses RunCode to run a function that opens
Form2, passing OpenArgs "Automatic". Then I just pass the macro's name with the /x MacroName command-line argument when opening the application. Again, so far so good.
Except for one thing: the only way I know (besides VBA or a macro) to auto-open a form is to set that as the default form in the current DB options. But then Form1 opens regardless of whether I open the application by double-clicking it or by using the shortcut
that includes the /x MacroName argument. This means that when auto-running the application, Form1 opens as well as Form2. No, it does not hurt anything, but I am trying to keep this as clean as possible.
I tried cancelling Form1's Form_Open event based on the value of a variable set in my auto-run function, but that did nothing to close Form1, so I infer that the default object/event priority in Access causes the form to open, and therefore its Form_Open
event to fire, before the macro calls the function that opens Form2. So now my aforementioned function sets the value of public Boolean variable AutoRun to True before opening Form2, and I check that value on Form1's timer, then close it if AutoRun = True.
And yes, I know I could create another shortcut that opens a different macro, or I could set Form1 to be invisible unless AutoRun = False. But the timer event and those all seem like workarounds. I would like to be just a bit more definite about this and
have Form1 check one time upon opening, or even some way to prevent it opening if the application is opened via my scheduler. That is, it would be great if I could embed a command in my function to tell Form1 not to open even though it is the normal default
form.
"Can't be done" or "you're stuck with what you already tried" are OK answers (if true). This is not critical; it just piqued my curiosity on how I might accomplish this.

Brian,
Command(), a built-in function, is available in VBA modules but cannot be called directly in the Access user interface (for example, a macro or text box control source). As a workaround, you can wrap Command() with a user-defined function created in a standard
module:
Public Function CmdLineArg() As String
CmdLineArg = Command
End Function
and then call it in the user interface like this:
=CmdLineArg() [the equals sign is required in some contexts]
The value of Command() remains in memory until the application is closed. You can view or modify its value in the Access 2013 user interface by navigating to:
File tab > Options > Client Settings > Advanced > Command-line arguments:
or with these VBA methods:
Application.SetOption "Command-Line Arguments", "SomeText"
Application.GetOption("Command-Line Arguments")
Calling Command() directly where necessary would simplify code development and maintenance.

How to delete items from the list of "auto-open" tabs that load whenever FF4 opens?

When I recently downloaded FF4, I was asked if I'd like to have FF automatically open the same tabs as were set in my IE. Great! Worked perfectly until I set those tabs as App Tabs. Now both the App Tabs and the original IE set of tabs open whenever I open FF -- essentially each tab loads twice -- as app tab and large tab. How can I delete tabs from the list of "auto-open" tabs? In addition, for some reason, every time I try to set my home page, it's not working -- I keep getting the same home page regardless of how many times I have tried to set a new one.

You can close a tab with a middle-click or with a left click on the close X on the tab or via the right-click context menu of that tab.<br />
Do those tabs come back if you close then and lose Firefox?

I have an iPad 2, and I am sending PDF file to my iPad, via a Hotmail email. But, the PDF arrives to the iPad in Mail already opended, as a picture on the bottom of the email. Is there a way to prevent it from auto open, so I can open with iBooks instead?

I have an iPad 2, and I am sending PDF files to my iPad, via a Hotmail account. But, the PDF arrives to the iPad Mail account already opened at the bottom of the email. Is there a way to prevent this auto-opening of the PDF. I've seen screen shots with the box, and PDF listed inside the box, but mine open automatically. I want to get them into iBooks...?

I am having the same problem and it is even bigger.
When opening a 1-page PDF in iBooks and sending it via mail it is sent inline as preview, but the recipient cannot open the file anymore. Also on iPad and iPhone there is no "open in" possible.
Somehow the mail app does destroy the file. What is going wrong?

How to auto open PDF after saving a file?

Hi!!! How y'll doing? I just switch to Mac recently. So can you guys kindly advise how do set auto open PDF file after save as a PDF file.
What am I trying to say is that, I have a excel file and I want it to auto open after I save as PDF file.

We are currently having users processing a large number of PDF's and would like to know if this is possible as well. The Save as PDF... option right now does not open the PDF file after it is created.

When iPad connected to Mac Pro, images from iPad camera auto open Aperture

Hi, When open Mac Pro with i Pad connected, Aperture opens atomatically with images from i Pad camera. Checked systen prefs for Mac & Aperture + U tunes for iPad prefs, but cannot find way to stop auto open of Aperture. Help!!!

Look in the application Image Capture on your Mac. In the preferences for Image Capture there will be a setting to choose which, if any, application to open when connecting a camera to your Mac. Change that setting to open nothing.
If you want Aperture to open when you connect your camera to the Mac and it continues to open when you connect your image then just quit Aperture after it opens and then start iTunes.
Any time there are photos in your iPad's Camera Roll. Your Mac will assume you'll want to upload those photos to your Mac.

TextEdit css files auto open in Dreamweaver all of a sudden - How can I stop this?

I'm on a Macbook Pro, OS X. Whenever I open a TextEdit css file lately, it auto opens in Dreamweaver. I've never used or saved anything to Dreamweaver so I don't know why this is happening. It hadn't in the past. I need to use TextEdit specifically at the moment, to code files for school assignments.

2 Ways to Change the Default Application to Open Files With in Mac OS X

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

[SOLVED] Auto-opening in Surf Only Works for Surf Spawned from Term

I didn't have this problem when I last used surf a few months ago, but I've now reinstalled it (0.4.1-1), and applied the patch, and now files (pdfs, etc) do not auto-open unless the instance of surf was spawned from a terminal (in which case, all goes well). The downloading part of the file itself still works. Any idea why?
Here is the relevant line from my config.h:
"ofile=\"$(xdg-user-dir DOWNLOAD)/$(basename \"$0\")\"; wget --load-cookies ~/.surf/cookies.txt -O \"$ofile\" \"$0\"; xdg-open \"$ofile\"", \
This replaces the normal download function using an xterm in surf.
I have xdg-user-dirs, xdg-open, and wget (of course) installed.
Edit: Strangely, this issue has resolved on its own, after a reinstall of my system. I'm glad things are back to normal but I'm sorry that I don't know what in particular fixed this. Perhaps I didn't have a necessary dependency installed, that I correctly installed upon my reinstall? In any case, marking this thread as SOLVED.
Last edited by Sara (2011-04-18 21:38:08)

Wattanut wrote:
Have you installed ntfs-3g?
I think I've had that problem before.
WoW, perfect solution. This is why I love this distro.

Auto Smartport Macros

I'm looking for a little advice.
Background
I've got Auto SmartPort Macros working on the newest firmware for my 2960x switches for all of my devices. 15.2(3)E
However I'm having some buggy issues with 15.2(3)E. If it's a small stack of 2 switches, no problems at all. However I tested on a 7 switch stack and repeatedly lost connectivity to the stack. Here are more details on that specific issue.
Cisco Suggested Firmware
The "Cisco Suggested" firmware is 15.0(2)EX5 (Based on what the download section tells you)
However when I'm running 15.0(2)EX5 the switch is unable to automatically detect my Cisco 7821/7841/8841/8831 phones and my CAP702i APs.
I'm assuming it's because the devices are actually newer than the Suggested Firmware.
Here is a 7821 Example, it knows the model but not that it should fall in the Cisco IP Phone category...
Here is a CAP702i:
The actual questions
Is there a way (besides updating the firmware) to add to the known devices list? "sh macro auto monitor"
I've considered adding all of the OUIs, there are about 6 that I've found. Is that my best solution?
If I start filling the switch up with OUIs to detect, am I going to have a performance hit?
Is anyone running 15.2(3)E in production? Feedback? Should I stay with the Cisco Suggested?
Is there any indication of when the next firmware rev will be released?
Thanks for any input and advice you can give.
-Mike

Hi Brademeyer29,
what you see unfortunately it is not configuration issue. This has been reported to the engineering team and should be fixed in the next release firmware 1.4.1.
For now you will have to use workaround such as not changing native VLAN or not to use smartport.
Regards,
Aleksandra

Auto open docx and xlsx files in MS Office 2011 after it download in Safari (com.apple.DownloadAssessment.plist not work)

Check "Open safe files" in Safari and define docx and xlsx extensions in ~/Library/Preferences/com.apple.DownloadAssessment.plist not work. Old doc and xls files was auto opened successfully...
Content of .plist file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>LSRiskCategorySafe</key>
          <dict>
                    <key>LSRiskCategoryExtensions</key>
                    <array>
                              <string>doc</string>
                              <string>docx</string>
                              <string>xls</string>
                              <string>xlsx</string>
                              <string>ppt</string>
                              <string>pptx</string>
                    </array>
          </dict>
</dict>
</plist>

Yes, but there at least you are talking to people who all use the app, while in this forum (which is for hardware and not software in any case, so already off the mark, since the problem has nothing to do with hardware), it is probably a minority.
A better place would be
https://discussions.apple.com/community/mac_os/os_x_mountain_lion
and or
https://discussions.apple.com/community/mac_os/safari
I did see someone from serveral years ago with the same problem at
http://www.neowin.net/forum/topic/877358-open-microsoft-office-files-automatical ly-after-download-in-safari/
I wonder if there is another list somewhere of permissible extensions in that .plist....

How do i make websites auto open when i open firefox

i am trying to have 3 tabs auto open when i first open firefox , i had a friend try to set it up for me but now one of the tabs that auto opens it the "firefox add-ons" page. i want to remove it from the auto open list but i have no idea why, i would also like t add a few pages

Is it selected in iPhoto's General preference pane?
If it is and still not working correctly try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto, reset iPhoto's preferences and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
OT

Blogspot blogs auto opens in new tab facebook followers [ff 4rc]

When i open a blogspot blog (blogspot.com) Firefox auto opens new tab with blogs facebook followers and some times with youtube videos embed in blogs front page.
It happen in all blogspot sites. Im using FF 4rc, with FF3 i dont have problem.

You are posting to the wrong forum. For html/css layout issues try posting to the Dreamweaver forum.

Auto open multiple links in tabs

Hy,
Is there a way in safari to auto open all the links in the page? For example, i have a page with many links to images and it's a real pain to cmd-click all the links. So is there a way to have safari auto open them?
Thanks!

Hi,
Your welcome ...
Yes, it would be the browser who hat this feature in it ... but, you are the first I ever hat contact to here on the Discussion Forum who ask for it.
And thanks for the *** star
Dimaxum

Auto open Macro

Similar Messages

Maybe you are looking for