Auto P.O from Service Requisition

hi Friends,
I am unable to generate Auto P.O from Service requisition.I have maintained auto P.O in default value of External service IMG and auto P.O in vendor master.
But still when a requisition with fixed or desired vendor is saved it is not converted int P.O.
KINDLY INFORM IF ANY OTHER SETTING IS TO BE MAINTAINED.
THANKS & REGARDS
Venkatesh

Hi Venkatesh
Have u activated Indicator: "automatic purchase order allowed" in material master purchasing view.
if u activate this indicator, purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
Try this.
I hope it will work.
regards,
Pankaj

Similar Messages

Auto PO creation from service PR(ME59N)

Hi All,
We have service PR's and need to convert to PO's automatically via ME59N.
I have followed below steps but unable to convert to Po's getting message no Pr's found while executeting ME59N
checked VMR and Automatic PO check box selected.
Step1: Creating PR for services
Step2: and assigned source to this PR through t.code: ME56 (contract existed for this vendor)
Step3:Run the ME59Nby giving PR Number, but PO is not created
what could be the reason..is any idea about auto PO creation for Service PR's
Incase of material i can successfully converts PR's PO's but services i can't.
Thanks in Advance,
Warm regards,
Venkat
MM/SRM Consultant

Hi venkat
it should create a PO if the contract is valid..
Note 733045 - Wrong Interface values passed to Services for ME59N
When transaction ME59N is used to convert service purchase requisition
(PR) to purchase order (PO),the program within the ME59N transaction
calls the service package with the wrong interface values.
The following example illustrates one such case :
A Service PR is created and an Outline agreement is assigned as a source of supply to the PR.
when the transation ME59N is executed using the PR's the system performs a mandatory check against the Tax code and tax code has to be entered against each service line to complete the transaction even though the tax code is maintained as a condition.
In the above situation,system behaves in a correct manner for the
transaction ME59 but fails for the transaction ME59N.
Other terms
MS_SERVICE_PACKAGE , ME59N , ME59 , WITHOUT_SCREEN , COPY_SERVICES
Reason and Prerequisites
The calling program of the transaction ME59N calls the function
MS_SERVICE_PACKAGE of services with the wrong interface values.
is it applicable for you?

Text Flow from service order to requisition

Hi Everyone,
I having a problem regarding text flow from service orders IW31/IW32 to requisition ME53N.
I created/updated a service order in IW31/IW32 and enter some text in "Operation Short Text" column. When I release the service order the short text should ideally be reflected in purchase requisition. What's happening right now is that "If the length of text entered in IW32 is more than 40 characters then the text is reflected in requisition ME53N otherwise any updates to this column text are not reflected in ME53N".
I debugged ME53N and found that it gets the value of text using READ_TEXT so I hope the same is stored in standard text while saving IW31/IW32. I checked the text also which is created after saving Iw32 and it contains changed data only if the length of the data is more than 40 characters.
To me it looks like standard SAP process that the text will flow from service order to purchase requisition only if the data length is more than 40 characters. If anyone has any idea can you please share. Is there any sugesstion for correcting this. Any reason or OSS.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Aug 13, 2008 3:30 PM

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Auto Po creation for Services from service PR

Dear friends,
I need to configure the same scenarion Auto PO for Service PR with item cat D and Account assignment K.
I have done following settings.
1) Auto PO marked in Vendor master
2)SproMMExternal Services ManagementSource Determination and Default Valuesfor Purchasing Organizations-Auto Po generation for service requitions.
3)PR created with Item cat --D and account assignment cat K with material group as input data.
no material number and service number.
4)Info record created for material group and vendor.
5)Source assigned to PR via T code ME56
now i am trying to create the Auto PO via ME59N but i am getting the message " no suitable PR found"
Please suggest the action.
Looking for your reply.
Thanks & Regards,
Vinod Kshirsagar
09420693261
Edited by: vinod kshirsagar on Jan 3, 2008 1:04 PM

Since u have assigned source of supply--only enter PR
Try to creat through me58
for me59
Check the following
vmr --auto PO tick
mmr/smr--auto PO tick
info record--tick
source of supply with fixed source..

Auto-triggering of PM Planning from service contract

Greetings!
I am currently working to automatically trigger preventive maintenance service order from service contracts. However, I have been struggling to understand some of the dates and the date rules, and how they work?
The dates are:
                                                    Rule Name
a) Planning start date:                  Today's Date
b) Planning Date From:                Determine Planned Date
c) Planning Date To:                    Planned Start + Tolerance
d) Start of Interval                        Planning Start Date
e) Service order creation date:     Planned Date - 2 weeks
f) Tolerance:
Let's say that I would like to have a contract valid from the 13.08.2014 to 13.09.2015, and I want the preventive maintenance service order to be begin from 20.08.2014, with a interval period of every 2 days (may be until 10.09.2015). Then how should I fill these dates in the service contract item ?
I would be glad if someone explained it to me. If you have a better example, I would also appreciate that.
Thank you.

Hi,
When you are using Contract is a Outline agreement -That may be Quantity or Value contract this for specific period.
Example you can maitain various Service line items for entire Periods as per the Contract details with Vendor.
when you want to create Release order w.r.t Contract for a specific work or only for Specific Services
whatever you want to required service for that release order that only system will ask us to select the services just like while creating Service entry sheets how we adopt the required services lines for accepting.
we need to select the Services from the contracts by manually while creating Release order
System will not copy automatically.
If you have more than 100 service lne items in Contract If you want to create release order only for 10 service line items then unnecessarly 100 line items will copies.T o overcome this problems SAP will allow to select the service manuall for adopting to release order from contract
I think you are clear with the statement.
with regards
Shrinivas gangoor
Edited by: Shrinivas Gangoor on May 19, 2009 1:00 PM
Edited by: Shrinivas Gangoor on May 19, 2009 1:01 PM

PO CNV: Auto-Create POs from PUR Reqs generated by OM

Objective: Convert open sales orders and maintain the link to the purchase order for back to back and drop shipment sales orders?
Question: Is it possible to convert the sales orders first. Then run requisition import to create the purchase requisitions in the PO module. After the requisition lines are created, convert the purchase orders through the open interface table or an API by auto-creating the PO from the requisition lines? This would maintain the link between purchasing and order management.
If this is not possible, does anyone have any suggestions? Someone mentioned using BPAs (this assumes I can assign items to specific suppliers).
Any ideas are greatly appreciated.
Thanks

Hi,
After creating a PR, why you want to go thru open interface.
There is a standard functionality : AUTOCREATE, available , which will convert the PR to PO.
On PO Shipment level, you can view the SO number & Line Number also.
Please review the below link.
Oracle Applications - Functional: Business Flow of Drop Ship Order

How to cancell PO from Service Entry sheet

Hi,
We have many open service Purchase orders in the system(More than 1800) and we would like to cancell these PO's as business dont need the service.
Scenario:
We have raised PR, which is approved by multi level approvals
After PR is approved, PO is created again approved by multi level approvals
Now 1% of the above PO's required to be cancelled which is almost aroung 1800 in number.
Pls note that we have Funds management active, so budget has consumed in the system during PR/PO process.
Now if we cancel PO's then even PR's also to be cancelled which is very lengthy process, Is there any other way to do this.
Can we do anything from service entry sheet?
Regards,
Sunil

Hi Sameer
I don't think you can close the PO from ML81N without posting some form of service receipt.
Do you have any experiences with the mass maintenance transactions?
After reading some of the discussions below I would suggest you use the MEMASSPO transaction to set the deletion indicator on each PO item (EKPO-LOEKZ) to "L". Running transaction MASS for business object will get you to the same functionallity.
There is also a MEMASSRQ transaction (or MASS for business object BUS2105) which you can use to quickly set the closed indicator for the corresponding requisition lines.
This doc http://scn.sap.com/docs/DOC-25758 written by Parag Parikh should help if you don't have any experience.
Regards
Robyn

Auto PO creation from PR through ME58 problem.

Hi experts.
We are providing facility to our client auto po creation from PR through Me58 transaction code.
I am facing amazing problem is that it is working fine in development client , not working in Quality and Production client , exactly problem is that ME58 u2013 Ordering Assigned Purchase requisition & Process Assignment Create PO , Purchase order cannot be created, PR shift in document overview , it means user want to drag and drop in purchase order then system create PO , this problem I am facing in Quality & Production , but it is working fine in development server there is no need to drag and drop , immediately after Process assignment Create PO , system directly convert PR into PO just only need to check and save PO. I compare everything with development & quality data including material master , source list and everything still I am unable to understand where is the problem , is there any customization settings related to auto po ? pls. suggest any solution to solve this issue.
Kumar

Hi,
Config setting.
Settings for Automatic PO creation is:
1. Select the Automatic PO check box/option in Purchasing view of material master
2. Select the Automatic PO option in the purchasing data view of Vendor master
3. Maintain Purchase info record
4. ME56- Assign the vendors to PR's
5. ME58- Create PO via assignment list(PR-> PO)
6. ME57- Assign and process PR's
7. ME59N - Create PO automatically via PR
Above step by step procedure is involved in the Automatic PO creation.
SAM

Auto PO creation from PR

Dear All,
I have done all process required for Auto PO creation from PR. With TCode Me59 i am able to create a PO also but some field in PO are blank like in header level Additional tab - Validity Start and Validity End, in Communication tab - Your Reference and Our Reference.
And while using ME59N, its shows error
"PO cannot be created
PO header data still faulty
Enter Our Reference
Enter Validity End
Enter Validity Start
Enter Your Reference
Requisition could not be converted"
How will i fill these field. Any link from info record or source list. These field are necessary in PO.
Please anybody help me to solve this issue.

Yes Sir. You have said the right thing. At first i have done the same that make these fields optional. but here as per our business these fields are mandatory for PO. Is there any other way that we forcefully enter data in these fields.
And one more thing i want to ask, i have created PR through MRP run, in this how could i maintain fixed vendor, valuation type, purch org, info record. These all things are necessary to create auto PO creation. Now what are we doing that we create PR through MRP run and then go to change PR enter all these thing and then run ME59N. After that the same problem some fields are blank in PO.
Please suggest me any other way to maintain this....

Auto PO creation using purchase requisition

Hi,
I have tried the following steps for auto PO creation using purchase requisition.
i. Maintain Auto PO in Material master Purchasing view
ii. Select Automatic purchase order in Vendor master- Purchase data
iii. Maintain info-record
iv. Create PR through ME51
v. enable source determination during creation of PR
vi. Execute using ME59N
But Auto PO is creating with the same document type (e.g NB) which is used while creating purchase requisition (e.g NB). Following steps have done in SPRO.
1. SPRO - MM - Purchasing - purchase requisition - define document type
a. NB- PR document type LINK TO DI01- PO document type
2. SPRO - MM - Purchasing - Purchase order - Define document type
a. DI01- PO document type LINK TO NB- PR document type
3. There is no linking from NB - NB & DI01 - DI01 but still it is creating auto PO with document type NB iif requisition has been created with document type NB.
Please suggest on this . waiting for ur quick response.
Thanks...
ARATI.
Thanks!
Arati.
Edited by: Rakesh Gupta on Aug 20, 2009 11:00 AM

Hi
Please check the below thread
PR to PO via ME59 -Doc type issue
Thanks/karthik

WiSM having trouble getting the IP from service-vlan DHCP

WiSM WLAN Service Module WS-SVC-WISM-1-K9 in 6509e running VSS IOs s72033-ipservicesk9_wan-mz.122-33.SXI2a.bin having trouble to get the IP from service-vlan DHCP.
The pertinent config is as follows.
vlan 300
name WiSM_Service_Vlan
interface Vlan300
description *** WiSM Service-Vlan
ip address 192.168.200.1 255.255.255.0
ip dhcp excluded-address 192.168.200.1
ip dhcp pool WiSM_Service-Vlan_300
   network 192.168.200.0 255.255.255.0
   default-router 192.168.200.1
wism service-vlan 300
vlan 183
name WiSM_Management
interface Vlan183
description *** WiSM Management Vlan ***
ip address 10.39.139.254 255.255.255.0
wism switch 1 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 1 native-vlan 183
wism switch 1 module 4 controller 2 native-vlan 183
wism switch 2 module 4 controller 1 native-vlan 183
wism switch 2 module 4 controller 2 native-vlan 183
HO2NET0001#sh wism status
Service Vlan : 300, Service IP Subnet : 192.168.200.1/255.255.255.0
      WLAN
Slot Controller Service IP       Management IP    SW Version Status
----+-----------+----------------+----------------+-----------+---------------
20    1           0.0.0.0          0.0.0.0                      Service Port Up
20    2           0.0.0.0          0.0.0.0                      Service Port Up
HO2NET0001#sh module
Mod Ports Card Type                              Model              Serial No.
1    8 CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL13442Q5N
2    8 CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL13442GAL
3   48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX     SAL13410N8P
4   10 WiSM WLAN Service Module               WS-SVC-WISM-1-K9   SAD133101UY
5    5 Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL13442JE4
Mod MAC addresses                       Hw    Fw           Sw           Status
1 0025.84f1.55b8 to 0025.84f1.55bf   2.1   12.2(18r)S1 12.2(33)SXI2 Ok
2 0025.84f1.4e58 to 0025.84f1.4e5f   2.1   12.2(18r)S1 12.2(33)SXI2 Ok
3 0027.0da7.c240 to 0027.0da7.c26f   3.2   12.2(18r)S1 12.2(33)SXI2 Ok
4 0023.5e25.7168 to 0023.5e25.7177   2.3   12.2(14r)S5 12.2(33)SXI2 Ok
5 001f.9e2a.2608 to 001f.9e2a.260f   3.1   8.5(3)       12.2(33)SXI2 Ok
Mod Sub-Module                  Model              Serial       Hw     Status
1 Distributed Forwarding Card WS-F6700-DFC3C     SAL13442EG9 1.4    Ok
2 Distributed Forwarding Card WS-F6700-DFC3C     SAL13442H9T 1.4    Ok
3 Centralized Forwarding Card WS-F6700-CFC       SAL13442HU9 4.1    Ok
4 Centralized Forwarding Card WS-SVC-WISM-1-K9-D SAD133200D6 2.1    Ok
5 Policy Feature Card 3       VS-F6K-PFC3C       SAL13442E5S 1.1    Ok
5 MSFC3 Daughterboard         VS-F6K-MSFC3       SAL13421AJZ 2.0    Ok
Mod Online Diag Status
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
HO2NET0001#sh vlan
300 WiSM_Service_Vlan                active    Gi1/4/9, Gi1/4/10
The service IP is supposed to have been populated with an address from the dhcp pool. I am also unable to connect to it by doing a session switch 1 slot 4 processor 1. I get the following upon attempting to do so:
HO2NET0001##session switch 1 slot 4 proc 1
The default escape character is Ctrl-^, then x. You can also type 'exit' at the remote prompt to end the session Trying 0.0.0.0 ...
Any assistance or ideas offered will be greatly appreciated.
Thanks,

wired client is working & able to get IP from vlan 300 DHCP pool.
Here is the complete configuration.
Core-Switch6509#sh run
Building configuration...
Current configuration : 21462 bytes
upgrade fpd auto
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
service counters max age 5
hostname
boot-start-marker
boot system flash sup-bootdisk:
boot-end-marker
security passwords min-length 1
logging buffered 8192
no aaa new-model
ip subnet-zero
ip dhcp excluded-address 192.168.200.1 192.168.200.2
ip dhcp pool wism-service-port
   network 192.168.200.0 255.255.255.0
   default-router 192.168.200.1
ip dhcp pool voiceFLR1
   network 10.39.103.128 255.255.255.128
   default-router 10.39.103.254
   option 150 ip 10.39.139.240 10.39.139.241
ip dhcp pool voiceFLR2
   network 10.39.104.128 255.255.255.128
   default-router 10.39.104.254
   option 150 ip 10.39.139.240 10.39.139.241
ip dhcp pool voiceFLR3
   network 10.39.105.128 255.255.255.128
   default-router 10.39.105.254
   option 150 ip 10.39.139.240 10.39.139.241
no ip domain-lookup
vtp domain
vtp mode transparent
switch virtual domain 100
switch mode virtual
mls netflow interface
mls cef error action reset
spanning-tree mode pvst
spanning-tree extend system-id
wism service-vlan 300
wism switch 1 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 1 native-vlan 183
wism switch 1 module 4 controller 2 native-vlan 183
wism switch 2 module 4 controller 1 native-vlan 183
wism switch 2 module 4 controller 2 native-vlan 183
diagnostic bootup level minimal
redundancy
main-cpu
auto-sync running-config
mode sso
vlan internal allocation policy ascending
vlan dot1q tag native
vlan access-log ratelimit 2000
vlan 101
name Grd_FLR_Data_Vlan
vlan 102
name Grd_FLR_Voice_Vlan
vlan 103
name MZ_FLR_Data_Vlan
vlan 104
name MZ_FLR_Voice_Vlan
vlan 105
name 1st_FLR_Data_Vlan
vlan 106
name 1st_FLR_Voice_Vlan
vlan 107
name 2nd_FLR_Data_Vlan
vlan 108
name 2nd_FLR_Voice_Vlan
vlan 109
name 3rd_FLR_Data_Vlan
vlan 110
name 3rd_FLR_Voice_Vlan
vlan 111
name 4th_FLR_Data_Vlan
vlan 112
name 4th_FLR_Voice_Vlan
vlan 113
name 5th_FLR_Data_Vlan
vlan 114
name 5th_FLR_Voice_Vlan
vlan 115
name 6th_FLR_Data_Vlan
vlan 116
name 6th_FLR_Voice_Vlan
vlan 117
name 7th_FLR_Data_Vlan
vlan 118
name 7th_FLR_Voice_Vlan
vlan 119
name 8th_FLR_Data_Vlan
vlan 120
name 8th_FLR_Voice_Vlan
vlan 121
name 9th_FLR_Data_Vlan
vlan 122
name 9th_FLR_Voice_Vlan
vlan 123
name 10th_FLR_Data_Vlan
vlan 124
name 10th_FLR_Voice_Vlan
vlan 125
name Wireless_Users
vlan 126
name Wireless_Guest
vlan 150
name Printer
vlan 151
name v151
vlan 152
name v152
vlan 153
name v153
vlan 154
name v154
vlan 155
name v155
vlan 183
name Network_Management
vlan 300
name WiSM_Service_Vlan
interface Port-channel1
description *** For 1st Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel2
description *** For 2nd Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel3
description *** For 3rd Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel4
description *** For 4th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel5
description *** For 5th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel6
description *** For 6th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel7
description *** For 7th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel8
description *** For 8th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel9
description *** For 9th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel10
no switchport
no ip address
switch virtual link 1
mls qos trust cos
no mls qos channel-consistency
interface Port-channel11
description *** For 10th Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel12
description *** For Ground Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel13
description *** For MZ Floor ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel20
no switchport
no ip address
switch virtual link 2
mls qos trust cos
no mls qos channel-consistency
interface TenGigabitEthernet1/1/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet1/1/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet1/1/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode on
interface TenGigabitEthernet1/1/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode on
interface TenGigabitEthernet1/1/5
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode on
interface TenGigabitEthernet1/1/6
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode on
interface TenGigabitEthernet1/1/7
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode on
interface TenGigabitEthernet1/1/8
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode on
interface TenGigabitEthernet1/2/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 7 mode on
interface TenGigabitEthernet1/2/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 8 mode on
interface TenGigabitEthernet1/2/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 9 mode on
interface TenGigabitEthernet1/2/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 11 mode on
interface TenGigabitEthernet1/2/5
description *** Connected to Juniper Port Ten 0 Inside ***
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
interface TenGigabitEthernet1/2/6
no switchport
no ip address
interface TenGigabitEthernet1/2/7
no switchport
no ip address
interface TenGigabitEthernet1/2/8
no switchport
no ip address
interface GigabitEthernet1/3/1
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/2
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/3
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/4
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet1/3/5
switchport
switchport access vlan 154
interface GigabitEthernet1/3/6
switchport
switchport access vlan 154
interface GigabitEthernet1/3/7
switchport
switchport access vlan 154
interface GigabitEthernet1/3/8
switchport
switchport access vlan 154
interface GigabitEthernet1/3/9
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/10
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/11
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/12
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/13
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/14
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/15
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/16
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/17
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/18
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/19
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/20
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/21
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/22
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/23
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/24
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/25
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/26
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/27
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/28
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/29
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/30
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/31
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/32
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/33
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/34
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/35
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/36
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/37
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/38
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/39
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/40
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/41
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/42
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/43
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/44
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/45
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/46
no switchport
no ip address
shutdown
interface GigabitEthernet1/3/47
switchport
switchport access vlan 107
switchport mode access
spanning-tree portfast edge
interface GigabitEthernet1/3/48
switchport
switchport access vlan 152
switchport mode access
interface GigabitEthernet1/5/1
no switchport
no ip address
shutdown
interface GigabitEthernet1/5/2
no switchport
no ip address
shutdown
interface GigabitEthernet1/5/3
no switchport
no ip address
shutdown
interface TenGigabitEthernet1/5/4
description *** Connected to CS-2 Port Ten 2/5/4 ***
no switchport
no ip address
mls qos trust cos
channel-group 10 mode on
interface TenGigabitEthernet1/5/5
description *** Connected to CS-2 Port Ten 2/5/5 ***
no switchport
no ip address
mls qos trust cos
channel-group 10 mode on
interface TenGigabitEthernet2/1/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet2/1/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
interface TenGigabitEthernet2/1/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode on
interface TenGigabitEthernet2/1/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 2 mode on
interface TenGigabitEthernet2/1/5
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode on
interface TenGigabitEthernet2/1/6
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode on
interface TenGigabitEthernet2/1/7
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 5 mode on
interface TenGigabitEthernet2/1/8
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode on
interface TenGigabitEthernet2/2/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 7 mode on
interface TenGigabitEthernet2/2/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 8 mode on
interface TenGigabitEthernet2/2/3
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 9 mode on
interface TenGigabitEthernet2/2/4
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 11 mode on
interface TenGigabitEthernet2/2/5
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface TenGigabitEthernet2/2/6
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface TenGigabitEthernet2/2/7
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface TenGigabitEthernet2/2/8
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet2/3/1
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/2
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/3
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/4
switchport
switchport access vlan 183
switchport mode access
interface GigabitEthernet2/3/5
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/6
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/7
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/8
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/9
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/10
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/11
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/12
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/13
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/14
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/15
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/16
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/17
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/18
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/19
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/20
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/21
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/22
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/23
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/24
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/25
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/26
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/27
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/28
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/29
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/30
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/31
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/32
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/33
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/34
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/35
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/36
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/37
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/38
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/39
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/40
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/41
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/42
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/43
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/44
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/45
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/46
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/47
no switchport
no ip address
shutdown
interface GigabitEthernet2/3/48
no switchport
no ip address
shutdown
interface GigabitEthernet2/5/1
no switchport
no ip address
shutdown
interface GigabitEthernet2/5/2
no switchport
no ip address
shutdown
interface GigabitEthernet2/5/3
no switchport
no ip address
shutdown
interface TenGigabitEthernet2/5/4
description *** Connected to CS-1 Port Ten 1/5/4 ***
no switchport
no ip address
mls qos trust cos
channel-group 20 mode on
interface TenGigabitEthernet2/5/5
description *** Connected to CS-1 Port Ten 1/5/5 ***
no switchport
no ip address
mls qos trust cos
channel-group 20 mode on
interface Vlan1
no ip address
interface Vlan101
description *** Grd Floor Data Vlan ***
ip address 10.39.101.126 255.255.255.128
interface Vlan102
description *** Grd Floor Voice Vlan ***
ip address 10.39.101.254 255.255.255.128
interface Vlan103
description *** MZ Floor Data Vlan ***
ip address 10.39.102.126 255.255.255.128
interface Vlan104
description *** MZ Floor Voice Vlan ***
ip address 10.39.102.254 255.255.255.128
interface Vlan105
description *** 1st Floor Data Vlan ***
ip address 10.39.103.126 255.255.255.128
interface Vlan106
description *** 1st Floor Voice Vlan ***
ip address 10.39.103.254 255.255.255.128
interface Vlan107
description *** 2nd Floor Data Vlan ***
ip address 10.39.104.126 255.255.255.128
interface Vlan108
description *** 2nd Floor Voice Vlan ***
ip address 10.39.104.254 255.255.255.128
interface Vlan109
description *** 3rd Floor Data Vlan ***
ip address 10.39.105.126 255.255.255.128
interface Vlan110
description *** 3rd Floor Voice Vlan ***
ip address 10.39.105.254 255.255.255.128
interface Vlan111
description *** 4th Floor Data Vlan ***
ip address 10.39.106.126 255.255.255.128
interface Vlan112
description *** 4th Floor Voice Vlan ***
ip address 10.39.106.254 255.255.255.128
interface Vlan113
description *** 5th Floor Data Vlan ***
ip address 10.39.107.126 255.255.255.128
interface Vlan114
description *** 5th Floor Voice Vlan ***
ip address 10.39.107.254 255.255.255.128
interface Vlan115
description *** 6th Floor Data Vlan ***
ip address 10.39.108.126 255.255.255.128
interface Vlan116
description *** 6th Floor Voice Vlan ***
ip address 10.39.108.254 255.255.255.128
interface Vlan117
description *** 7th Floor Data Vlan ***
ip address 10.39.109.126 255.255.255.128
interface Vlan118
description *** 7th Floor Voice Vlan ***
ip address 10.39.109.254 255.255.255.128
interface Vlan119
description *** 8th Floor Data Vlan ***
ip address 10.39.110.126 255.255.255.128
interface Vlan120
description *** 8th Floor Voice Vlan ***
ip address 10.39.110.254 255.255.255.128
interface Vlan121
description *** 9th Floor Voice Vlan ***
ip address 10.39.111.126 255.255.255.128
interface Vlan122
description *** 9th Floor Voice Vlan ***
ip address 10.39.111.254 255.255.255.128
interface Vlan123
description *** 10th Floor Voice Vlan ***
ip address 10.39.112.126 255.255.255.128
interface Vlan124
description *** 10th Floor Voice Vlan ***
ip address 10.39.112.254 255.255.255.128
interface Vlan150
description *** Printer Vlan ***
ip address 10.39.120.254 255.255.255.0
interface Vlan151
description *** Connected to Juniper FW Port Ten 0 ***
ip address 10.39.121.1 255.255.255.240
interface Vlan183
description *** Network Management Vlan ***
ip address 10.39.139.254 255.255.255.0
interface Vlan300
ip address 192.168.200.1 255.255.255.0
ip classless
ip route 0.0.0.0 0.0.0.0 10.39.140.169
ip route 0.0.0.0 0.0.0.0 10.39.121.14
no ip http server
no ip http secure-server
control-plane
dial-peer cor custom
line con 0
login local
line vty 0 4
login local
line vty 5 15
login local
mac-address-table aging-time 480
no event manager policy Mandatory.go_switchbus.tcl type system
module provision switch 1
slot 1 slot-type 227 port-type 60 number 8 virtual-slot 17
slot 2 slot-type 227 port-type 60 number 8 virtual-slot 18
slot 3 slot-type 147 port-type 61 number 48 virtual-slot 19
slot 4 slot-type 242 port-type 31 number 10 virtual-slot 20
slot 5 slot-type 254 port-type 31 number 2 port-type 61 number 1 port-type 60 number 2 virtual-slot 21
module provision switch 2
slot 1 slot-type 227 port-type 60 number 8 virtual-slot 33
slot 2 slot-type 227 port-type 60 number 8 virtual-slot 34
slot 3 slot-type 147 port-type 61 number 48 virtual-slot 35
slot 4 slot-type 242 port-type 31 number 10 virtual-slot 36
slot 5 slot-type 254 port-type 31 number 2 port-type 61 number 1 port-type 60 number 2 virtual-slot 37
end
Thanks & Awaiting for response.

How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

Settings -> Mail -> Signature and edit it to whatever you'd like.

Imovie 09 How do I stop Imovie from auto importing video from iphoto

Imovie 09 How do I stop Imovie from auto importing video from iphoto.
Hi I've done a lot of searches on how to do this but no answers found.
Imovie is beginning to become really slow because of the large number of video's. It takes 3 minutes to startup. Editing is sometimes slow lot's of spinning beach balls e.t.c.
I would like to only import the video I want to edit and hopefully get a quicker Imovie in the process.
My Iphoto library is about 95 Gbyte in size.
My mac has 4 gb ram and I use the internal disk.
Any other ways to work with Imovie/Iphoto are also welcome.
regards

I won't get iMovie 9 till Tuesday, but based on what you said I may need to take some precautions. One reason I didn't like iMovie 8 is because it automatically imported everything in iPhoto library. What I'm going to do is create a new iPhoto library before importing the photos/videos from the camera. Or if you already have it in your main iPhoto library copy only the photos you'll use in your iMovie 9 project to the new library. Then start iPhoto while pressing the option key which will allow you to select the new iPhoto library you have created. Then I suppose that when you start iMovie 9 it will automatically import only the photos/videos from the new library.

Lead as Follow up document from Service Contract

Hi Experts,
There is a requirement to create Service Lead from Service Contract. I dont think there is something different by name Service Lead so i assume it is Standard Lead which is present in system.
I maintained the copy control for Tx. Types and as well as for Item Categories.
Issue:
If i create a Service Contract and create a follow up Lead with no items, it works fine.
Suppose i use an item (sales/service item), and i try to create a follow up Lead, the resulting pop-up to choose items from preceding document shows and error and the item doesnot get coped and displays an error, 'Sold-to-Party is not eligible for contract items'.
Has anyone come across this issue?
Thanks and Regards,
MG

Hi Maggii,
1. Is it possible to create a Lead from Service Contract? Does the system allow it even after maintaining relevant copy control configurations?
A.Yes, it is possible while arranging of copy controls for transactions need to activate u201CCopy Item numberu201D.
2.What does the error message, 'Sold to party not eligible for contract items' mean....have u ever seen such error?
A. Means, the particular sold to party is not maintained for that contract (for trail check with any maintained sold to party for that error message), cross check the contract again under in partner functions.
If it is suits to your requirement please some reward points,
Thanks,
Suuny.

How can I change my auto-correction language from english to french?

My system language is english, so all the default language is also in english
but how can I change the auto-correction language from english to french and without changing the menu language?
Message was edited by: Marixomia

It's just, I want to change my spelling checker from english to french, that when I type some words in wrong order or miss some, I can know that.
For now, when I type in french, almost every words are underlined by the red lines...

Auto P.O from Service Requisition

Similar Messages

Maybe you are looking for