Auto PGI for only deliveries which contain a Handling Unit

It is possibe to setup automatic post goods issue when confirming the transfer order using :-
IMG menu path: Logistics - Execution - Warehouse Management - Interfaces - Shipping - Define Shipping Control - Define Shipping Control at the Movement Type Level
Mvt type 601 - setting Copy WM Quantity to option '4' -i.e. auto PGI
However this would then work when confirming transfer orders for ALL outbound deliveries.
I only require auto PGI to work for deliveries containing Handling Units.
Is this possible ? I imagined it might involve cloning mvt type 601 to another mvt type which would then be used
specifically for handling units.
Regards.
Phil.

Thanks for the reply, using VL06G in background is an option.
Is another possible option to use a Special Movement Indicator ?
WM mvt typ 601 could be copied to a new one e.g. 610. The interfaces table could then be setup so that Ref mvt type 601
with a Special Movement Indicator points to WM mvt type 610.
The issue I have is that I don't want to set the Special Movement Indicator on the Material Master (WM 1 view).
I know it is possible to define the Special Movement Indicator within MIGO as a default setting.
Is there something similar within the Outbound delivery ?
Regards.
Phil.

Similar Messages

More than one deliveries into a single handling unit

Hello,
We are a retail apparel company and use SAP to communicate delivery requirements for our stores. We would like the ability to consolidate our deliveries into a single handling unit. This will help reduce freight and will simplify our receiving process in our retail stores.
For example, many customers pre-order merchandise that will be received into our distribution center and then shipped to a Retail store for customer pickup. We would like to consolidate mutliple orders going to the same place so that they can be packed into a single box. Each customer request results in an order being created and the box that the order is packed in is the SAP handling unit. The issue we have is that if 10 customers request the same merchandise, it is easier to pack the 7 units into a single handling unit (i.e. box) than to pack 7 boxes.
I do realise that the handling unit table VEKP can hold only 1 delivery object (i.e. VPOBJKEY), however I'm hoping that someone can highlight possible options for us to simplify our shipping process.
thanks in advance
RJ
if we need to utilize shipments, is someone able to walk through what setup steps would be required.

Dear RJ,
You may use WAVE concept in WM in order to accomplish the requirement.
A wave is group of deliveries that can be combined into one order based upon the customer number.
For example: If you have 10 different orders from customer XYZ and you may consolidate the all sales orders in one single order and then create a WAVE for that.
Thanks,
Babu.

Pack two or more Outbound Deliveries into the one Handling Unit

Hi Gurus,
I'd like to, sometimes, pack two or more Outbound Deliveries into the one Handling Unit, can anyone please advise how this can be achieved.
Thanks in advance

Hi Simon,
there's no way you can do that, the HU is owned by the delivery, so the relationship is one to one.
In order to be able to pack items coming from multiple deliveries into the same HU/HUs you'll have to use Shipments: basically a shipment is made of deliveries and HUs are owned by the shipment, that way you would be able to achieve your result.
Pls. reward if useful.
Best regards,
Enrico

One billing document for multiple deliveries which are for different PO

Hi All,
I have a scenario where i need to create one billing document for multiple deliveries.
Payer is same
Ship-to is same
PGI date different
Sales area is one
PO different
In standard SAP it will create seperate billing document for different PO
Please advice if there is a different copy routine which will combine all the POs in one billing document.

Hi Mr. Bhat,
Go to VTFL --> Select the combination of your delivery type and billing type --> Double click at Item(Left side) --> Select your item category --> Click at details
In the feild "Data VBRK/VBRP" --> I think the routine assigned is 601 (Inv.split - PO Num.) --> Now change it to 3 (Single invoice)
Then try your process, Hope it helps.
Regards,
MT

Printing Barcode for a 18 digit SSCC No (Handling Unit Number) thru' VL02N

Hi,
I'm trying to print a Barcode for a corresponding Handling Unit number in VL02N transaction code.
I have created a new device type by name ZBARCODE in SPAD transaction, the Device Type name is:
ZLB_ZEB and Spool Server is: fihdev02_FDV_00
In SE73, have created a new System Bar Code by name ZZEAN128 with the following parameters
00 00 10.00 CM 2.00 CM C128 000 .
In the Printer Bar Code option, ZBARCODE device type has been selected and in the Display Print Control page ZZEAN128 Bar Code, Prefix and Suffix has been assigned to the ZBARCODE Device Type.
In the copy of the LE_EAN128_SSCC00 Form I have assigned the ZZEAN128 Bar Code as a Character Format.
But, it is not printing the Barcode in the ZEBRA 110XI Printer.
How to overcome this problem.
Kindly guide me to fix it.
Thanks in advance,
-- Jessica

I have solved it myself.

I have just got a new macbook pro and am trying to sync my iTunes, however i have an old acount that i have all my music on and a new account which is set for only me which is now on my phone and the main account on my laptop. help please

with my purchase of the new macbook pro i have been unable to upload any music from my iphone or any other details except from my pictures. I tried to set up the icloud but i am having difficulties doing so as all my music on my phone is under an old shared account and on my laptop i have a new account specifically for me which has also been newly uploaded onto my phone with the £70 voucher.

From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Looking for a table which contains Datasource and the name of DSO

Hello,
I need to extract a list with the datasource + Name System + DSO. If anyone know a BW table.
Thanks in advance.
Regards,
Santos.

Hi Santos,
Please check the table "RSTRAN" -- directory of transformations in your system.
If you have between data loading between DS and DSO, then you should have active data transformations.
In this table, select type of source as data source and type target as DSO and execute.
You will get list of DS and DSO which has active transformations.
If you want details about each DS and DSO then you can check the below tables
RSDODSO --- Directory of all ODS Objects
RSOLTPSOURCE --- Replication Table for DataSources in BW
Regards,
Venkatesh

Restriction for only one chief position per organizational unit.

Hi
Customer insists of having not more than one chief position in each org. unit.
Is there any way that the system will block or give a warning while I am trying to mark an additional chief position for an org unit ?

Hi Zeev,
you need to create a user exit.
Aranka

Po quantity value showing difference for only decimal qty range

Hi Experts,
In purchase for line items which contains decimal qty like 0.232 , it is taking net price also in decimal format.But for other line items it is displaying correctly(whole qty no's)..
pricing conditions we maintained at info record level.
attached doc for your reference.
Thanks & regards,
Deepika

have you checked is there any rounding rule for condition type which is suggested by span 1.
One think I have noticed, your amount is showing 2.09, but my amount is showing 2.08.
And your value is showing for J3AP condition type. J3AP is used for SAP AFS material.
Regards
Dev

Table which contains name of the report generated from table

Hello everyone,
Is there any table which stores the report names that are created from table.
For example if my table name is 'ABC' a new report will be created for table at run time '/1BCDWB/DB/ABC'.
I also need to have table names, which stored the values when a layout is changed
For example if I have ten fields in my table, first time ill choose 5 fields, second time ill change the layout and choose 10 fields and ill save the layout.
If any Function modules are there please let me know
Please let me know, if anyone has details.
Thanks,
Gayatri.
Moderator message : Duplicate post locked. Continue with the thread - [Name of the table which stores report contents and layout changes|Name of the table which stores report contents and layout changes;.
Edited by: Vinod Kumar on Jun 14, 2011 3:42 PM

Hi,
Thanks for reply.
I know about ttxfp and tnapr. but none of the two table contain form name with its description. actully I m looking for a table which contain form name with there desription. please if you have info regarding this, Do share with me . this is really urgent
regrads,
Ruchika saini

PGI for returns using WS_DELIVERY_UPDATE

Hi Friends,
I'm using the FM WS_DELIVERY_UPDATE to do PGI for outbound deliveries. It is not doing the PGI for returns delivery. Can someone help me on how to use this FM for returns delivery PGI or is there any other FM to do this. I do not want to use BDC.
Appreciate your <removed by moderator> response.
Thanks,
Dikshitha G
Edited by: Thomas Zloch on Jul 7, 2011 12:49 PM

Use FM WS_LM_GOODS_MOVEMENT, pass the parameter IF_BITYPE = 'N'. Pass the table parameter CT_WORKTAB of type LIPOV. You can get the data from LIKP. The picking has to be complete on delivery. Use FM WS_DELIVERY_UPDATE to complete picking.

Creating process chains containing an infocube which contains a DSO

Hi All,
I am trying to create a process chain for Delivery Services which contains an infocube(0PUR_C08).the infocube in turns contains a DSO(0PUR_O01) which contains 4 datasources.please give me the flow of the process chain and how to link the DSO and the infocube..
Points will be awarded:)
Regards,
Manjari.

Hi Manjari,
If you have four datasources and if you are loading data into a single Data target from those Datasources, you should follow the order according to the fields and the dependency on the primary keys in those loads. To load data from different datasources into a single data target, all the datasources should have common field which represents a primary key.
For example:
Datasource1 contains Fields F1, F2, F3.
Datasource2 contains fields F1, F4, F5.
Here F1 is the common field in both the datasources.
If you want to load data into single Datatarget from these two datasources, you should load according to the requirement and the retrieval of data based on each other. If you want to link all the fields, you may need to write routines in the update/Transfer rules. It all depends on the dataflow.
Based on these you should have the order in process chains.
If you are loading data into different data targets from different data sources, you can load anything at anytime either parallelly or one after the other.
Hope this helps u...
Regards,
KK.

Handling unit sales unit not allowing to do PGI.

Hi.
My Basic unit of measure is KG. and my sales unit of measure is TS( 10,000).
When i am doing the picking and asigning the handling units and if I asigns the handling units ( delivery units Kg) it works fine and if i do it for the delivery in TS .it some times picksup the handling unit and not allowed to do PGI.
the conversion factor is ok. and and delivery allows only 3 decimal points.
conversion factor is as follows.
10 TS = 89 kg.

Hi
Don't use the handling unit while doing PGI, still if you want to use handling unit, then you define procedure for handling unit at IMG.
Path:
IMG, Logistics General, Handling unit management, basics, Technical basics, and set the procedure.
Reward if it helps
Regards
Prasanna R

Output type for non assigment Handling Unit

Hi All.
I would like to make a Output type for non assigned Handling Unit
Can anyone tell me about it?
Edited by: John Brown on Feb 9, 2010 10:53 AM

Make a new output type, transaction NACE, application V6 (Handling unit) and assign the output type to your output procedure.
Create a new output requirement, transaction VOFM and assign it to the output type in the output procedure. In the requirement check on KOMKBV6-VPOBJ. The value of KOMKBV6-VPOBJ shows to which object the handling unit is assigned: '00' or empty for not assigned, '01' for outbound delivery. See the domain VPOBJ for all possible values.
Reagards Jack

Handling Units in Inbound deliveries

Dear All,
Could you please let me know what is the complete SAP process for HUM in Goods reciept with and without WM. We are recieving the Boxes containing various combinations of configurable material from the Supplier and the same are being delivered to the Customer sites. Kindly let us know the Standard SAP solution to tackle this.
Thanks a ton,
Regards,
KS

Hello KS,
The inbound process with Handling unit is as follow:
- Purchase order is created with Shipping Notification
- The vendor notifies the goods recipient of the delivery of the goods by using a shipping notification that also contains the packaging data.
- The shipping notification generates an inbound delivery that includes the packing information from the shipping notification. (Incase NO EDI notification, the inbound delivery must be created and packed manually for the purchase order.)
- The handling units are put away and the inbound delivery is posted for goods receipt.
Hope this helps.
Regards

Auto PGI for only deliveries which contain a Handling Unit

Similar Messages

Maybe you are looking for