Auto pick release and auto ship confirm in 11.0.3

Hi All,
Anybody having sample code to do auto pick release and auto ship confirm process in 11.0.3?
Any suggestions please.
Thanks & Regards,
Gowri

Set hold until date to the order lines and run the auto release concurrent program.
Thanks / Bhaskar Akkala

Similar Messages

Where to find Pick Release Date After Ship Confirm in Order to Cash cycle

Dear All,
In Order to Cash cycle how to find Pick Release Date. After performing the Ship Confirm Transaction, how to view when we have performed Pick Release Transaction?
Thanks in Advance.
Regards,
Aditya

Run the Diagnostic OM order Information report against the order. In the report you can the find the picked date.
Can I know you are using the transact move order ?
Thanks

Need API Name for PIck Release and Ship Confirm for WMS Module

Hi All,
One if my requirement is that Initially I will create Internal Sales Order and send to the other system (legacy) there they do the shipping then they provide the flat file which contains shipping information. Based on the incoming file I will close the order. Here they are using the WMS to process the pick release and ship confirm.
Can any one please help me how to do pick release and ship confirm by using an API or Interface in WMS. If knows please provide the name of the API's and flow.
Thanks,
Prasanna

For external orders we have a solution on WMS_DEVICE_CONFIRMATION_PUB api.
may be you have done pick release using this api in WMS enabled organizations. After pick release
you can use WSH api to do Ship Confirm.
Anatoly.

Order Entry Without Pick Release And Ship Confirm

I would like to create a sales order in Order Entry (Release 11), but due to some integration requirement, I do not want to go through the Pick Release And Ship Confirmation process but then I would like to go through the AR interface and Autoinvoice process. Are there some interface tables that I can update and processes that I can submit in the background to simulate the Pick Release and Ship Confirm processes. Your advice is much appreciate. Thank you and God bless you.

Speaking as a functional person you can create an Invoice Only cycle, and it will not need to go through the Inventory module, requesting the Pick Release and Ship Confirmation. <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by williamson ():
I would like to create a sales order in Order Entry (Release 11), but due to some integration requirement, I do not want to go through the Pick Release And Ship Confirmation process but then I would like to go through the AR interface and Autoinvoice process. Are there some interface tables that I can update and processes that I can submit in the background to simulate the Pick Release and Ship Confirm processes. Your advice is much appreciate. Thank you and God bless you. <HR></BLOCKQUOTE>
null

Quality Check after launch pick release and before shipment

Dear All,
This is our client requirement to have Quality Check after launch pick release and before shipment in order management.Can any one please help in this regard?We are also using process Manufacturing Module?
Regards
Naveed

See if this helps
A Guide to Oracle Quality: An Oracle White Paper [ID 248331.1]
Mahendra

Auto Date field and Auto Number field

I am fairly new to this,
I have crated a form using the form wizard in Acrobat Pro 9.0 and I would like to make a field an Auto date field and another an Auto Numbering field. I have read a lot of the posts and there are a lot of recommendation to point the auto number to a database. This is fine but I do not know how to reference that field to an external database. PLEASE HELP!!!! Somebody GEEK me!!

I am fairly new to this,
I have crated a form using the form wizard in Acrobat Pro 9.0 and I would like to make a field an Auto date field and another an Auto Numbering field. I have read a lot of the posts and there are a lot of recommendation to point the auto number to a database. This is fine but I do not know how to reference that field to an external database. PLEASE HELP!!!! Somebody GEEK me!!

LT45 (Picking Progress) and Two Step Confirmation

Dear all,
I have Two Step confirmation in place for one WM movement type and I am happy with it.
We also use Multiple Processing for Deliveries. As a result, the Groups created by this process are used to monitor the Picking Progress in LT45
In LT22 or LT24 there is clear distinction between Open TO's, Confirmed TO's and half Conirmed TO's (yellow triangle.
Much to my disappointment I cannot see such a distinction in LT45.
Is there a way or another Monitor available that does show me the different statusses? A yellow bar if the group is half confirmed is too much to ask, but an alternative would be nice.
Thanks!
Sandeep

Ananthram,
Thanks for reading my Question.
I am talking about TO's that use Two-step Confirmation. In LT22 / LT24 they show as Yellow Triangle, as you know this means half confirmed.
As you know in LL01 they don't show as yellow but as red, just like in LT45. So this is very misleading.
Can you tell me a place where I can clearly monitor my Picking Progress and see a distinction between Green, Yellow and Red
(Confirmed, Half confirmed, Open)
Thanks again for taking the time.
Sandeep

Sales Order not getting Pick Release and getting BACKORDERED

Hi Gurus,
There is an order in oracle production. When user try to Pick Release this order the order is not getting picked instead it is getting backordered. The line quantities are available and it is also not in hold. I also see the log files of ‘Pick Slip Generation report’, but it shows no error message. Do you have any idea on this?
Thanks,
SamD

Are the quantities in a reservable subinventory?
If you go to material workbench, does the quantity show as available to reserve?
Did you specify a subinventory in the release process?
Does the sales order line have a subinventory on it?
Check if your onhand is in staging subinventory?
Check older threads on this issue such as http://kr.forums.oracle.com/forums/thread.jspa?threadID=603998
Sandeep Gandhi

Analog of Auto Align Layers and Auto Blend Layers?

In Photoshop you can use Auto Align Layers then Auto Blend Layers to select the region that is in focus from each layer. How can I do the same thing in PSE 9? Thanks.

No, you really can't do focus stacking in PSE without a third party plug-in of some sort. This thread is about PSE 8, but it applies to PSE 9 as well:
http://forums.adobe.com/message/2514826

SPA2102 auto pick-up and hang up for intercom

I have a 2102 being used for an intercom on my SIP network. The box is really just a speaker. It seems like in the past I got this to work before by making a switch to one or two settings that basically made the 2102 assume all invites would be auto answered and then all bye would end.
I found an article stating that changing the CPC to 1 would make it hang up. But I have two issues, 1 this is SIP and it seems like I would want it to hang up on BYE, and 2 that doesn't explain how to get it to accept all INVITEs.
It's driving me nuts because I swear I did this before a my job at the lumber yard with the same device when we integrated our new SIP network into our existing clunky intercom. I thought it had something to do with the port polarity.
If anyone has a clear answer that would be great. Thank you.

The CPC would be used to signal your device cabled to the SPA2102 analog FXS interface to disconnect (go back on-hook) because the adapter has received a Sip Bye. This is a setting on the Regional Tab. The setting is "CPC Duration" which can be set from 0 to 1.000 seconds which sets the length of the voltage drop.
I would think your device itself needs to have a feature to auto answer the incoming call when it receives a ring from the SPA. Something like an answering machine would do. I do not believe you can set the SPA2102 itself to auto answer an incoming sip call.

Goods Receipt with auto bin placement and auto confirm?

Hi All
I have a need to putaway and confirm a goods receipt for stock items into 1 bin.
Therefore, at GR (MIGO) the goods are receipted and places into 1 bin and confirmed as putaway.
Is there some config I need to set up or a separate transaction to use.
Thanks in advance
Darren

Hi Darren
Is the single bin always the same based upon the material or the movement?
If it is material you can implement a fixed bin putaway, or if it is movement you can do the same
Both use config and master data
Steve

Use auto red-eye and auto c/a algorithms from RSP

I'm assuming that Michael J. and company are still associated w/ LightRoom, I'd like to see the auto red-eye fix and the auto c/a fix functionalty from RSP used in LightRoom. I find the manual red-eye fix tool in LightRoom difficult/unwieldy and the c/a remover does not do as good a job RSP did automatically (yes, I recognize it could be user error, but I'd still rather have the tool automatically make the attempt and let me fine tune if needed.)
Thanks,
Matt

You are correct, I misremembered about the red-eye removal (I must have been thinking of a different package.) The PF control may have been it, but whatever "it" was, it got rid of the PF as well as the c/a that is evident in other software (including LR.) So whatever it was, I'd like it back....

AC10 - Auto risk analysis and auto mitigation

Hi,
I was wondering if it is possible to
- run an automatic risk analysis at the end of an approval stage of the workflow, the same way it is possible to configure at the time of request sending?
- automatically put a mitigating control in the request for the risks found?
In our case, there is only one mitigating control for each risk and the assignment of the control is an unnecessary manual task to perform. The mitigation assignment will be approved in a seperate WF by the mitigation owner.
It seems there is no out of the box solution to this, so any alternative suggestions are welcome.
Thanks,
Daniela

Hi Daniela,
If I may give my opinion, I would probably break your question down into 2 parts.
1) Auto Risk analysis at the end of a stage - Making "Risk Analysis Mandatory" at that stage is probably the method. Unfortunately this does mean clicking one or two buttons (so not fully automated). Think AC uses this method to ensure the reviewer is aware of the conflicts caused etc.
2) Auto Mitigation - For a business access workflow in a 'Live' situation, this is probably not a good idea, as analysing and making the decision on whether to proceed with the request should really be performed by an actual person responsible for that stage in the work flow e.g. Role Owner or Security Lead etc. You would not want to mitigate all risks automatically (if I have understood correctly that you have a mitigation per risk ID). In theory, an automated mitigation process would mitigate all risks without discrimination.
On a side note, there is a configuration setting under SPRO for Access controls as follows
"Risk Analysis- Access Request : Param ID 1072 - Mitigation of critical risk required before approving the request". By enabling this configuration, you could force a mitigating control to be applied to any user requesting Critical Access.
Hope this helps.

CS5 - Why are Edit Auto Blend Layers (and Auto Align Layers) gray and not accessible?

I have CS5 and would like to try focus stacking. I File > Automate > Photomerge with a few photos. They have been aligned in layers. I would like to Auto Blend Layers but the function is gray and not accessible.
Thanks,
Mark

Thank you THANK YOU. As I was doing this I realized you asked me to show my selected layers. I haven't been doing that. I thought photoshop would blend all open layers. Thanks again.

Load auto fill? and auto post info when composing and e-mail

How do I load the Form auto fill function
How do I add a signature block that is automatically added when composing an e-mail?

Firefox doesn't do email, so it doesn't have a feature to autofill a signature.
If you are using Firefox to access a webmail portal, that feature would be provided by that portal's software. Usually part of HTML format email, or "rich text" email. See your webmail service provider's help files or support forum for help with that.

Auto pick release and auto ship confirm in 11.0.3

Similar Messages

Maybe you are looking for