Auto PO creation against GR

Hi all,
I want a purchase order to be generated automatically as soon as the GRN is done.
The purchase order will be created of the GR quantity.
Can someone help me out with the steps to be followed for doing the same.
Regards
Sushil

Hi,
If you want to be able to just post a GR and have a PO generated automatically (immediately without further input) then you need to try what I suggested in the earlier post.
You have to flag the movement type to indicate that you want an automatic PO (I would recommend generating a new movement type for this so that it is not generated by accident, but you can try it on a 101 in your "play" client first). SPRO MM > Inventory management > Goods Receipt > Create Purchase Order Automatically)
You also need a full info record for the materials concerned (so that it can determine the vendor and price etc.).
Finally you have to allocate the plant to a standard Purchasing Org. SPRO Enterprise structure > Assignment > Materials Management > Assign standard P org to plant.
The other options being suggested are methods of adding items to a GR that have no PO raised, they do not create a new PO specifically for the GR you are doing.
Steve B

Similar Messages

  • Auto GR creation against PO after consumption of material in Process order.

    Hi GURU's
    My client is asking about automate GR against Purchase Order when he confirm the porcess order of GR consume material means when he confirm the process order, the GR is created for the comsume material( GR must be equal to consume qnty) against Purchase Order.
    1) Is thier any material type issue
    2) what are the setting need to be done
    Please take an Urgent action bocs its a critical point to me solve.
    Hope for the best for ur response.
    My ID:- [email protected]
    Thansks in to all
    Parminder

    Hi Guru's
    My Requirment is...............
    Suppose I have material  X (GAS) type ROH.
    I have already made  a monthy base Purchase Order this.
    We Get GAS through Pipe Line.
    stock my be vary( zero or some stock)
    my question or requirement is when I create a Process Order for Material Y where this Material X is consumed ( 261 Mov Type).
    When I confirm the Created Process order for Material Y(suppose 20) & require quantity of X for this Material Y is 40 & we have no stock or may be less than the require quantity at this time system check the availability & Generate GR for this material X against Related Purchase Order or If have Multiple Purchase Order then ask for Purchase order selection & then post the Confirmation (GOODS Movment).
    Hope u understand my requriment ,Please suggest
    Thanks
    Parminder

  • Auto PO creation from service PR(ME59N)

    Hi All,
    We have service PR's and need to convert to PO's automatically via ME59N.
    I have followed below steps but unable to convert to Po's getting message no Pr's found while executeting ME59N
    checked VMR and Automatic PO check box selected.
    Step1: Creating PR for services
    Step2: and assigned source to this PR through t.code: ME56 (contract existed for this vendor)
    Step3:Run the ME59Nby giving PR Number, but PO is not created
    what could be the reason..is any idea about auto PO creation for Service PR's
    Incase of material i can successfully converts PR's PO's but services i can't.
    Thanks in Advance,
    Warm regards,
    Venkat
    MM/SRM Consultant

    Hi venkat
    it should create a PO if the contract is valid..
    Note 733045 - Wrong Interface values passed to Services for ME59N
    When transaction ME59N is used to convert service purchase requisition
    (PR) to purchase order (PO),the program within the ME59N transaction
    calls the service package with the wrong interface values.
    The following example illustrates one such case :
    A Service PR is created and an Outline agreement is assigned as a source of supply to the PR.
    when the transation ME59N is executed using the PR's the system performs a mandatory check against the Tax code and tax code has to be entered against each service line to complete the transaction even though the tax code is maintained as a condition.
    In the above situation,system behaves in a correct manner for the
    transaction ME59 but fails for the transaction ME59N.
    Other terms
    MS_SERVICE_PACKAGE , ME59N , ME59 , WITHOUT_SCREEN , COPY_SERVICES
    Reason and Prerequisites
    The calling program of the transaction ME59N calls the function
    MS_SERVICE_PACKAGE of services with the wrong interface values.
    is it applicable for you?

  • Auto Tranfer order against OBD

    Dear People,
    Requirement was auto creation of Outbound delivery once the STO created and simultaneously  transfer order should be created from our WM storage location(Confirmation of TO manual). As a first part auto delivery creation was successfully created but auto transfer order against the delivery is not getting generated.
    I have set following config in IMG
    1. In OMKZ of control data for Warehouse has been set to "X"
    2. In Movement of 601
    --> TO creation = 2
    --> TO confirmation =  Blank
    --> Auto TO = A
    --> In Confirmation both the check Box are unchecked
    Kindly confirm if there is any other check that need to be configured.
    Thanks in advance
    JK

    Please be aware that automatic creation of TO and immediate creation of TO are not the same in SAP.
    Automatic creation of TO:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
    You have to schedule a background job (program: RSNAST00 ) to achieve your goal.
    As for immediate TO creation please check OSS note 566090.
    Please also search for threads, these have been discussed already on this forum.
    Regards,
    Csaba
    (if Rao's answer helped you why didn't you gave the points to him?)
    Edited by: Csaba Szommer on Dec 28, 2009 11:08 AM

  • Auto goods receipt against production order

    is it possible to do auto goods receipt against production order of (material with serial number)
    if not please suggest me solution
    please also tell me possibility of enchancement
    for goods receipt against production order
    sunil

    Hi
    If you check mark the auto goods receipt in the control key used in the work center used in the routing then you can have auto goods receipts posted for the production order against a confirmation.
    Rathnakar

  • Auto PO creation from PR through ME58 problem.

    Hi experts.
    We are providing facility to our client  auto po creation from PR through Me58 transaction code.
    I am facing amazing problem is that it is working fine in development client , not working in Quality and  Production client , exactly  problem is that ME58 u2013 Ordering Assigned Purchase requisition  & Process Assignment  Create PO , Purchase order cannot be created, PR  shift in document overview , it means user want to drag and drop in purchase order then system create PO , this problem I am facing in Quality & Production , but it is working fine in development server there is no need to drag and drop , immediately after Process assignment Create PO , system directly convert PR into PO  just only need to check and save PO. I compare everything with development & quality data including material master , source list and everything still I am unable to understand where is the problem , is there any customization settings related to auto po ?  pls. suggest any solution to solve this issue.
    Kumar

    Hi,
    Config setting.
    Settings for Automatic PO creation is:
    1. Select the Automatic PO check box/option in Purchasing view of material master
    2. Select the Automatic PO option in the purchasing data view of Vendor master
    3. Maintain Purchase info record
    4. ME56- Assign the vendors to PR's
    5. ME58- Create PO via assignment list(PR-> PO)
    6. ME57- Assign and process PR's
    7. ME59N - Create PO automatically via PR
    Above step by step procedure is involved in the Automatic PO creation.
    SAM

  • Auto PO creation from PR

    Dear All,
    I have done all process required for Auto PO creation from PR. With TCode Me59 i am able to create a PO also but some field in PO are blank like in header level Additional  tab - Validity Start and Validity End, in Communication tab - Your Reference and Our Reference.
    And while using ME59N, its shows error
    "PO cannot be created
    PO header data still faulty
    Enter Our Reference
    Enter Validity End
    Enter Validity Start
    Enter Your Reference
    Requisition could not be converted"
    How will i fill these field. Any link from info record or source list. These field are necessary in PO.
    Please anybody help me to solve this issue.

    Yes Sir. You have said the right thing. At first i have done the same that make these fields optional. but here as per our business these fields are mandatory for PO. Is there any other way that we forcefully enter data in these fields.
    And one more thing i want to ask, i have created PR through MRP run, in this how could i maintain fixed vendor, valuation type, purch org, info record. These all things are necessary to create auto PO creation. Now what are we doing that we create PR through MRP run and then go to change PR enter all these thing and then run ME59N. After that the same problem some fields are blank in PO.
    Please suggest me any other way to maintain this....

  • Problem during Auto PO Creation

    Hi
       Im using a user exit for Auto PO functinality ..
       I have following conditions for creation of Auto PO
       1) For PR with source of supply as Info record will not be converted in PO automatiocally as Info record contains historical prices..
       PR can be assigned source from Source list, contract or quota arrangment for converting it in PO automatically.
        I have maintained all settings require din VM and MM for Auto PO creation..
       Still these PR which satisfies above criterion are not converted in PO automatically..
       when i tried to convert these PR in PO using me21n , i get the message as conditions not mainined so i have to maintain conditions and net price manually..
    then PO can be created manually..
      so what im missing for Auto PO functionality..
    Thanks..

    Hi,
    I would recommend that you add your contract data to the source list for the material, then you will see it proposed as a possible source for this material.
    The problem with source lists are that if you do not have one the system will propose all existing sources for you to choose from. If you DO have a source list the system will ONLY propose sources from that source list.
    One option is to use the auto generation transaction ME05 as a regular batch job to keep the sources up to date.
    But if you want the outline agreement to be the proposed source when there are others to choose from then select this as the default in the source list.
    So I think that your problem is that your agreements are not in the source lists that you have.
    Steve B

  • Auto PO  creation using purchase requisition

    Hi,
    I have tried the following steps for auto PO creation using purchase requisition.
    i. Maintain Auto PO in Material master Purchasing view
    ii. Select Automatic purchase order in Vendor master- Purchase data
    iii. Maintain info-record
    iv. Create PR through ME51
    v. enable source determination during creation of PR
    vi. Execute using ME59N
    But Auto PO is creating with the same document type (e.g NB) which is used while creating purchase requisition (e.g NB). Following steps have done in SPRO.
    1. SPRO - MM - Purchasing - purchase requisition - define  document type
    a. NB- PR document type LINK TO DI01- PO document type
    2. SPRO - MM - Purchasing - Purchase order - Define document type
    a. DI01- PO document type LINK TO NB- PR document type
    3. There is no linking from NB - NB & DI01 - DI01 but still it is creating auto PO with document type NB iif requisition has been created with document type NB.
    Please suggest on this . waiting for ur quick response.
    Thanks...
    ARATI.
    Thanks!
    Arati.
    Edited by: Rakesh Gupta on Aug 20, 2009 11:00 AM

    Hi
    Please check the below thread
    PR to PO  via  ME59 -Doc type issue
    Thanks/karthik

  • Issue with Auto PO creation

    Hello Gurus,
    Kindly help me with this issue.
    I have user who is using ME59 for the auto PO creation.When he runs this transaction with the "TEST RUN" flaged,in the result screen he is able to see a mesasage as "PO creation successfull" along with the vendor number for which PO has been created.
    But along with above  message he also needs material number & quantity  for which the PO has been created.
    Kindly let me know how to proceed with this request.

    It is not possible in standard , not for test run and not for production run, not with any customizing and I have not found any OSS note that may allow that.
    For any further information in the log you have to modify the program.

  • Auto po creation after save sales order.

    Hi, Experts,
    A s per  my business requirement, We have mapped configuratin for auto PR creation at a time of order if stock not available, But system not create automatic PO after save sales order. I want to crate Automatic PO after save sales order, it is possible i know , But for that which type for configuration require i don't know, can anybody give me solution for this issue.
    Thankls a lot in advance,
    Regards:
    Happy

    Hi,
    It's possible to create PO automatically after sales order is saved.
    1. Set up back-to-back, i.e. PR can be automatically created after the SO is saved.
    2. Item category - make sure 'Create PO automatically' checkbox  is ticked.
    3. Enterprise Structure --> Sales Organization - ensure that PO type, purchasing group etc. is maintained.
    4. Transaction code SWETYPV - Ensure that both checkboxes are ticked for BO (object category), BUS2032 (object type), ALECREATEE/CHANGED and ERRORCHANGINGPURORD/ERRORCREATINGPURORD.
    5. Optional: You could execute BD86 to check for consistencies (note that you can still get it work even if BD86 shows errors)
    Regards,
    HweeLing

  • Designer hangs during universe creation against SAP BW

    Hi,
    We are trying to create OLAP universe against SAP BW 3.5 and we are running into issue wherein the designer just hangs and is not able to create the classes and objects, in most cases we have waited for about 30-35 mins and still it doesn't come back. We tried this for both against an Infocube as well as against BW query.
    I have couple of questions regarding the process flow for universe creation against SAP BW,
    Does universe stores/extracts any data from BW, like storing LOVs for the hierarchies? I know it does reads the rows, columns, free characterstics etc. in case of BW Query.
    The time to create the universe depends on what factors, size of the cube or amount of metadata? The customer is concerned regarding what is the guideline on how much time would this process take when the universe comes back with the classes and objects. If there is any such guideline, what is it?
    Any response on this is appreciated.
    Thanks,
    Amit Banavalikar

    I had similar problems, setting the "Connection timeout" on the SAP/BW connection within Designer (default 10 minutes) from 10 min. to 60 or 120. ALSO: uncheck the universe limits on "number of rows (5000)" and "query duration (10 min)".
    This solved the problem.
    The connection timeout which is set directly on the SAP-BW connection in designer seems to be used in a wrong way. The definition of the "close connection after xx minutes" means that the connction should be closed after xx minutes of  not being used by any process.
    With SAP BW the connection seems to be closed regardless of it's use after the specified time period.
    regards,
    Walter

  • Auto PO creation

    Dear all,
    i would like to create the 50 Purchase requsition to 50 purchase order automatically.not manually. i have tried in me59 but i failed to create the Pos.
    Kindly advise how to use me59 t.code for creating the pos.
    Regards,
    Renuga.A

    Dear Renuga,
    For auto PO creation, just check have you done following pre-requisites
    1. Auto PO check for Material
    2. Auto PO check for Vendor
    3. Sourse list / Info-record
    4. Assignment of vendor to PR. ( If sourse determination is there, just check whether sourse is assigned to in PR)
    5. Then run ME59 as per your selection criteria
    Please close the issue if it resolves your problem
    Thanks,
    krishna reddy

  • Auto WT creation while doing partial GR in inbound delivery

    Hi All,
    We need auto WT creation once GR got completed. It is working fine using PPF if entire item GR got completed. But if we are doing partial GR , WT is not getting created.
    We do GR partially with HU and WT need to create for that HU only.
    Please help me if you have any idea about this.
    Thanks,
    Srikanth.A

    Hi experts,
    I have the same problem.
    We have deliveries with several items and we are using Tx /SCWM/GR for the partial GR (for each item).
    The partial posting to the ERP works fine.
    After the posting we want to create the putaway warehouse task only for the item for which we posted the GR. Unfortunatley the creation only starts (by PPF) if the GR is posted for whole delivery and for all items.
    Is there a way (by PPF) to initiate the creation of the WT only for the item for which the GR is posted?
    Thanks
    Ralf 

  • Auto delivery creation without settings!!

    Dear SD wizards,
    At my place the sales order - delivery settings are NOT for automatic delivery creation. However, in
    some cases, the delivery is getting created automatically in the background and can bee senn in the doc flow.
    Have done some introspection in these 'some' cases and found that they pertain to a few of our sales ofifces / storage locations and probably with some of our users not ALL the users.
    Would there be any settings for auto delivery creation based on storage locations / user access?
    Do advise how to go about resolving this unnecessary 'deliveries'!
    Thanks and regards,
    Tariq

    Dear Lakshmipathi,
    Thanks for the response but thats not the case. I had earlier checked the order settings and not found the "create delivery immediately" settings for the said order. However, on your advise I again went in there to find the 'tick' you said but I don't find any 'checkbox' to enter a tick, but the same drop down in the section 'Shipping' box named "Imediate delivery". the entry is blank in there, thereby signifying no automatic delivery is configured.
    Moreover, Do recall my initial point that it is for SOME of the cases only for which this is happening, doc type is common for all. What I have found is the storage location / sales office / userid as the main differentiating factors, till now.
    Any pointers anybody...??
    Regards,

Maybe you are looking for