Auto PO from ME59

Hi All
Can we have the following document setting in auto PR to PO conversion. Means I want pr document to be converted to desired PO document type in ME59
like
document type-PR    Document type-PO
          ZNB-ZNB
           ZNB-ZIB

Dinabandhu,
To my knowledge, this is not possible using the standard ME59 transaction. There is no standard way of doing this with ME59N as well.
However if you are open to using the new ME59N transaction instead of the old ME59 transaction, then you can use BADI ME_BSART_DET (method BSART_DETERMINE) to code your own logic to decide how the PO document type is determined (in your case it should be simply based based on the PR document type).
Also, please have a look at SAP note 114213 to understand how SAP derives the PO document type during ME59 processing.
If you are using stock transport orders (STOs), then you will need to apply SAP note 852641.
It would also help if you had provided some background on why need this functionality instead of just stating that you need to achieve this.
Hope this helps.
H Narayan

Similar Messages

  • How to take Auto backup from External Network Drive to Mac pro internal Dri

    Hi,
    I have a External Network Drive (Buffalo 1TB) which i use as a server, now i need to take auto backup from that external drive to the Mac i am working on, which has 2TB Internal hard Disk.
    Please could anyone help me on this.....
    Thanks in advance

    If you are looking to actually integrate what you have on the external one terabyte hard drive with the 2 TB hard drive you're using inside the Mac the best move for you if you want access to that data when using the Mac Pro server is going into utilities click on the top bar where it says go fall that down to the utilities told them that folder quickly once you are there you will see migration assistant click on that you will be asked to type your admin password to that. It will ask you "how do you want to transfer your information" then select from a Time machine backup or other disk when it asks you will be transferring information to your Mac Pro from your 1 Tb backup external hard drive once it's finished eject the drive or reformat it and use it again if your objective was to infect keep compress the data on the external so you have more space but do not have access to it I strongly recommend Carbon Copy Clone 3.3.1 is 100% free and does a fantastic job here is the link http://www.pure-mac.com/downloads/carboncopyclonerdl.html of copying every block to create an exact replica of your source hard drive. If you want something different and don't mind paying SuperDuper! is a great product as well this WebSite will have many options I would stick to carbon copy clone http://www.pure-mac.com/backup.html I also like EMC Retrospect backup and recovery software for the Mac it is a great product but very much on the expensive side for backup utilities although if you need word offers this might be right up your alley.
    I hope I wasn't help,
    Sincerely,
    Thomas

  • HP Laserjet P4014dn won't auto print from tray 1

    HP Laserjet P4014dn stopped auto printing from tray 1. Can't manually print from there either. Now it always pulls from tray 2 (bottom tray) even if paper is loaded in tray 1. Auto print is selected in software setting. SN [Personal Information Removed] CB512A. Help!

    There may be a couple of reasons why the printer will not auto print from Tray 1.
    The following references the User Guide for the printer which you can obtain from here:
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf
    Page 18 of the User Guide has the section "Paper Handling Menu".
    This section defines the menu items that can be used to set Size and Type for Tray 1.
    Page 85 of the User Guide has the start of the Configure Trays Section.
    In this section there are two notes.  If Tray 1 is set to ANY SIZE and ANY TYPE, the printer will pull from that tray whenever media is loaded in that Tray.  If Tray 1 is set to a specific size, it will act like a Cassette.  This means that it will follow the paper handling model of Trays 2, 3, etc..
    Example:  Tray 1 is set to Letter, Tray 2 is set to Letter.  When a job is sent from the PC requesting Letter and the Sources is Auto, the printer FW will look for the highest number tray that has letter installed and pull from that tray.  Thus, Tray 2 will always be used unless Tray 2 doesn't have paper.
    Page 86 has the section "Configure a tray by using the Paper Handling menu".
    Follow the steps in this section to validate that Tray 1 is set to ANY SIZE and ANY TYPE.  If not set to ANY SIZE, ANY TYPE then change the setting to be ANY SIZE and ANY TYPE.  You may have to scroll through the list of sizes and types to find what you are looking for.
    Once possibility is that the printer is not detecting that paper is loaded in Tray 1.  One method to verify this is to remove all paper from Tray 2 and lower trays if there are more than just Tray 2 installed. This will force the printer to pull paper from Tray 1 if paper is present.  If paper is present and the Tray 1 menu items are set to ANY SIZE and ANY TYPE and the printer prompts for you to load Tray 1 with paper, it is possible that the printer is not detecting that paper is in the tray.
    In this case, I would recommend you contact HP Support as the media presence sensor may no longer be working properly.
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Do the latest iMacs (new slim version) still support auto-switching from 220V to 110V?

    do the latest iMacs (new slim version) still support auto-switching from 220V to 110V?

    Yes. Apple power supplies work with voltages between 110 and 240 v.
    Allan

  • How do I stop iMovie 11 auto importing from external HD?

    Okay, I'm going crazy. I, the intrepid Googler, have so far been unable to find the answer to this question. Please somebody help me!
    I have hundreds of video clips stored on an external hard drive. However, when I crank it up, iMovie exceptionally irritatingly starts auto-importing every single clip back onto my MacBook's hard drive. No! No! NOOOO! That's NOT what I want! Stop it! Stop it! Stop it! I only want to import ONE video of MY choice at a time to edit and then save it back to the external drive, I don't have enough ROOM for ALL of them on the internal drive, you crazy machine!!!!
    So. I go into iMovie preferences, where I'd expect to see an option for turning off auto import. Nope. I cannot see anything there. Do I have menu blindness? Am I losing my mind?
    Then I Google 'how to stop iMovie 11 from auto-importing from external hard drive and find nothing. Am I alone in this? Surely not. Am I being a dunce? Possibly.
    Advice, anyone?

    Okay. Please ignore the above. I was being a dunce. Today, it appears not to be doing it any more. Bizarre. LOL!

  • HT201359 I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    Use the Report a Problem link in the emailed receipt.

  • HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

  • Auto GR from Inbound Delivery

    Hi Alll...
    1. Is ther any std config or Master data checks involed for creating an Auto GR from Inbound Delviery ??
    2. Thru ASN i am going to get an Inbound Delivery Created & need an Auto GR for one scenarion & other it shd not create an Auto GR. Basically we need this since we recieve goods from two differenet Locations ( One Location very close by and other Location quite far)
    Thanks
    Balaji

    Please use BAPI_GOODSMOVT_CREATE for your requirement.That should allow you to differentiate between what you need a GR against and what not..

  • How to make a redirect without auto-redirect from the portlet "edit" mode?

    How to make a redirect without auto-redirect from the portlet "edit" mode?
    I use some sofisticated customizing with server-side validation of the form data. I want to redirect to the page of the portlet "show" mode and to the "edit" mode depending on the validation results. How can I do it?

    Heay.....this worked for me.
    I am able to change the mode programatically from edit to show.
    HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
    I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
    Thanks
    ~Neeraj Sidhaye
    Try_Catch_Finally @ Y !
    ExtremePortal @ Gmail　Ｄｏｔ　Ｃｏｍ

  • Budget control in project WBS'e  while creating the auto PR from Sale order

    Hi experts,
    we are creating the auto pr from sales order for trading process with budget wbs element. but commitment is not posted in project wbs were as pr is created through sale order
    pls suggest if any additional setting is required  to post commitment while creating auto pr from sale order.
    rgds
    rajesh

    Check account assignement categories in SD for PR creation and See if you can make PR to be created with WBS as account assignement like we do in OPTT.

  • How can I turn off app auto start from last status? At OS X 10.8.3

    How can I turn off app auto start from last status? At OS X 10.8.3

    system preferences >general > close windows when quitting an application

  • Auto import from network drive

    Lightroom tells me the watched folder for the auto import function cannot be a network drive. I am using a laptop tethered to a camera, which then is accessible via the network. I want to auto import from this laptop into Lightroom.
    Is this not possible?

    That's the way I have to do it today, but sometimes the laptop is too far away to have a good wi-fi connection. I want to be able to continue to take pictures while tethered to the laptop without stopping. Better to have Lightroom watch, and when the laptop comes back in wi-fi range, then to auto import.
    What is your auto import workflow?

  • How do i delete photos in my library without having them auto delete from albums I've created

    My photo library is HUGE.  I want to delete photos from the library WITHOUT having them removed from specific albums I've already created.  Why do they auto delete from albumns???

    You can not
    Albums are not a place - they are one of many ways to view the photos in your library - each photo exist one and only one time - Events, Photos, albums, last import, last "n" months, etc are simply different way to view the photo - none take up additional disk space
    If you delete a photo form the library it is gone from every view of it
    LN

  • Bridge auto expands from one monitor to two when accessing folders

    When I try to rename a folder Bridge auto expands from one monitor to two monitors and doesn't let me change the name. If I try to delete a photo it auto expands, lets me delete the photo but remains expanded across two monitors. This is a new experience I have had Bridge CC for about a year and this activity started on Friday. How do I prevent Bridge from automatically expanding across the two monitors?

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Shows auto-delete from DVR.

    Since the recent updates I've had a problem with shows auto deleting from my DVR. Anyone else? It has nothing to do with the DVR being full. And it seems fairly random. I can have a show on there for weeks and it will remain but I can record something one night to find it gone the next morning.

    Haven't had 'random' deletes, but my DVR has been running near its capacity recently, and I've noticed that the autodelete algorithms are definitely somewhat over-aggressive - for example, clearing about 3 hours worth of stuff from the recent deletes folder *and* another 1 hour show in order to record a new 1 hour show. They also seem to have a few bugs, such as: a show stopped recording because of lack of space, even though there were other shows available to delete (only seen that once though).
    Do you use the 'Save Until I Delete' option? I find it useful for automatically ensuring that series recordings can't be auto-deleted, Unfortunately, haven't been able to find a way to set it in advance for single recordings, so have to go back and set it on shows after they have been recorded.
    In all the auto-deletes I've seen they do seem to remove the oldest first. Could the older shows that are saved on your DVR be marked 'Save Until I Delete"?
    Anyway, hope some of this helps ...

Maybe you are looking for