Auto populate other fields bases on the first 2 fields

Hello,
I have a form that has 5 fields in which the first 3 fields are pre-populated from the 1st web service based on their user id and now I'd like to have the other 2 fields to pre-populate bases on that first 3 fields that execute from a 2nd web service but having issues on that. If I have it manually enter the input than it work but I could not make it work by auto pre-populate bases on the first fields that already pre-poulated. Can you please advise on this..
Thanks in advance,
Han Dao

Hi Paul,
I use Form:ready to trigger the 2nd WS as the same one for the 1st one. I use AWS_ASSIGNED_ID (hidden field) to control both of the WS. I am not sure that I understand you correctly about the two sets of input output execute bindings for those fields. Can you please explain a little bit more.
Thanks, Han

Similar Messages

Auto-populate form fields based on end user input?

I'm currently attempting to create a new form that has a combo box "Locations" with various options. What I'm looking to do is have another text field auto populate other fields related to that location (such as address, contact information) to save on time and reduce opportunity for end user errors in input.
What are my options for accomplishing such a task? Some form of binding fields with a MS database possibly?
Thanks in advance for any advice and assistance on this matter!

Paul,
The form and (potential) database would be located on a shared drive on the company network in which those that would use the form already have access to.
The pc's that user's would be using have Reader 9.
The pc I'm using for developing this form has LC Designer 8, Acrobat Professional 8, and Reader 9.
Ideally, I would "like" for the end user to have the ability to add new locations, addresses, etc ... in the event it is needed, although this would not be likely to come up.
Based on the software I have on hand, and the need to not incur additional expenses, what would you suggest?
Thanks again Paul!

Auto populate text field base on anothe r text field input

ive created a medical form that the end user enters codes for medical reasons and a description for that code. the description are very long and tedious. is there a way to have the user enter the code in one field and have it auto populate another field with the correct description?
I was able to do this with a combo box but not with a standard text box. please note, i have never learned javascript and have been ""duct taping" peices of code to make things work up until now . appreciate the help

The advantage of the combo box is the automatic validation of the input as the selection is made.
You can use control statements like the "if" or "switch" statement or perform an array lookup. This action can be performed in the on blur action of the input filed or in the calculation script for the target field.

Backend order entry auto populate address fields

hello Guys,
we are getting orders by phone that i enter manually through the admin section of BC.
the customers have accounts with with their contact details saved.
until now i have been manually entering the delivery details on each order.
is there any way to have this populate the fields on these orders when i am in the backend. it seems a bit strange that i have to enter the address details for each order when i have the customers details stored in our data base.
any help would be appreciated.
thanks.

I'm looking to Auto-populate address fields after selecting a name from a drop-down. iPad compatability not required. Most of my users will be using Acrobat Pro or Reader on a PC. I'm generating the files on Mac Abrobat X Pro.
Is there an updated tutorial link someone knows about by chance? The above link no longer has a tutorial on it that I can see.
Or, if anyone can direct me to a javascript or something that I can modify with my data list, that'd be great! I've been looking all over the place, and have been struggling to find something that looks like it would work the way I want it to. I need the data list to be self-contained inside the pdf doc, not sourced from an outside database.
Thanks a bunch!

Auto populate text fields with a trigger such as entering text into input fields in ADF

Hello all,
I am not able to auto populate text fields with a trigger such as entering text into input fields in ADF.
I tried AdfFacesContext.getCurrentInstance().addPartialTarget(val); in the back end using setter method of input text field.
its not working ..
is there any way to achieve it
Regards,
Shakir

Hi,
Always mention your JDev version.
The valueChangeListener would fire only when you set the autoSubmit property of the field to true. Can you elaborate your requirement? What do you mean by related data? Are you performing some sort of search?
If you want to get the value you entered on the field, just set autoSubmit to true and get the new value from the valueChangeListener. If your requirement is something like as and when you type, do something, you need to check out this approach :https://blogs.oracle.com/groundside/entry/auto_reduce_search_sample
-Arun

Using JavaScript to auto populate a field based on numeric value of a separate drop down field

Hello, I am trying to set up a simple, I hope, javascript which will enable to me auto populate one field based on the numberic value of another field using Acrobat Pro XI.
Essentially I have 2 drop down fields (we'll call them DD1 and DD2).
DD1 is the sum of 8 preceding drop down values. That sum can be anywhere from 0 - 40. Whatever that sum falls within a range which identifies a rating. The ratings and ranges are below:
0-8: Non-Performer
9-16: Low Performer
17-24: Performer
25-32: High Performer
33-40: Exceptional Performer
DD2 is where the rating ("non-performer", "low performer", etc.) will be captured. Instead of requiring the user to look at DD1, determine the value, and then identify and input the rating manually, I would like DD2 to auto populate the rating based on the value (sum) in DD1.
For example, if DD1 shows a value of 27 then DD2 would auto populate "High Performer". So how do I write this code or execute this? In excel I would use an if, then statement. Is there something similar in Acrobat Pro XI.
Any help is greatly appreciated. Thank you in advance.

If you use a text field, the custom calculation script could be:
// Custom calculation script for text field
(function () {
    var s = getField("DD1").valueAsString;
    // Blank this field if input is blank
    if (!s) {
        event.value = "";
        return;
    // Convert string to number
    var v = +s;
    // Set this field's value based on the input
    if (v <= 40 && v >= 33) {
        event.value = "Exceptional Performer";
        return;
    if (v < 33 && v >= 25) {
        event.value = "High Performer";
        return;
    if (v < 25 && v >= 17) {
        event.value = "Performer";
        return;
    if (v < 17 && v >= 9) {
        event.value = "Low Performer";
        return;
    if (v < 9 && v >= 0) {
        event.value = "Non-Performer";
        return;
    // If none of the above fit, blank this field
    event.value = "";

Auto populate date field

I have a JavaScript that I use to auto populate date fields. However, I've discovered that it doesn't work when the form is opened on an iPhone or Android phone. Is there a way to auto-populate a date field without using JavaScript?

What app on the iPad are you using.
Different apps on mobile devices have varying degrees of JavaScript compatibility.

How do you auto-populate a field?

Hello.
If I present the user with a LOV's on an 'Insert Form', how do I auto-poulate a value in the same form based on what the user has just selected?
e.g.
User selects 'Employee Number' from a LOV, I then want to auto-populate the 'Employee Name' underneath.
I thought a simple sql query would get me the EMP_FULL_NAME FROM EMPLOYEES where EMPNO = (whatever EMPNO user has just selected).
TIA.

Hi Tia,
You are right you should just be able to use a query as the source of your page item for name. I will base my description below on page 1 and using APEX 4.
First of all you will need to set your :P1_USER_ID select list to submit the page so the value is set in session state, if you navigate to the settings section and then set Page Action when Value Changed to submit page.
You will then need to have a query as the source of :P1_NAME and a query something like
SELECT
    name
FROM
    users
WHERE
    user_id = :P1_USER_ID;One thing to not you will need to make sure you on submit processes are conditional based on a button else they will run when the user_id select lists is changed.
An alternative method to submitting the page would be to use a dynamic action providing your using APEX 4. The dynamic action could be fired when the value of :P1_USER_ID is changed and then update the value :P1_NAME dynamically.
Hope this helps
Paul

Auto populate for fields in ZTable

Hi
I created a Z Table with 10 Fields,Out of those 2 fields are timestamp and Created by.
Timestamp and Created by are made Output only fields in Table Maintenance Generator
SE11> ZTable>Table Maintenance Generator>Environment>Modifications-->Events
Type -5 concatenate sy-datum sy-uzeit into ZTable-Timestamp.
With which when user performs a manual posting in the table and save a record in SM30 the Timestamp is populated automatically.
Similar to these how can i Auto Populate the Created By with the user id (logon id) of the user who made the posting.
I tried to create a new event of type-5 - System is not allowing me to create a event another event of same time
How can i enhance the exisisting event so that i can get Auto Populate of Created By
Thanks in advance

Hi friend,
Put your code which populate user name inside form of event 5 (maybe below your existence code).
regards,

Is there a way to auto populate one field based on a selection made in another field?

We want to enter an account number and have the account name field auto populate.

Yes there are many ways.
Do you want to populate form a controlled source like a database?
From data stored within the form?

How to auto-populate form fields between documents?

I'd like to create an interactive form where the user inputs data into different fields and then the data gets auto-populated into other fields in forms linked to the original form. Is this possible with Acrobat XI? If not, then which Adobe product is best suited for this? If it's possible, how difficult is this to do? I don't need exact "how to" tips at this point. I am not a developer and I don't have any experience with Action Script. I'm just researching what products I can use, as a non-techie, to do the job. Thanks.

Thanks for your reply. I'm having a hard time understanding the functionality on the end-users's side with the different Adobe forms products. I did a little more reading up on this, but it's still not 100% clear. Perhaps you can help clarify.
Scenario 1: The user does NOT have a copy of Acrobat XI on their end, and I do NOT have a subscriptiont to FormsCentral, and I do NOT enable import/export features in the form using Adobe LiveCycle Reader Extensions. In this scenario, the user can fill out my form, but they can't save a copy of the completed form on their local drive. I, however, get a copy of the completed form where I can then extract and analyze the data.
Scenario 2: The user does NOT have a copy of Acrobat XI on their end, but I have have a subscriptiont to FormsCentral. The user can complete the form and save it on their local drive, but I can't have data auto-populate from one to another. (Note: I went to the FormsCentral website and it says "Allow respondents to download the PDF form, print out, save, EDIT and submit later." I interperet that as meaning they can add text to a fillable form and save it on their end.)
Scenario 3: The user does NOT have a copy of Acrobat XI on their end, but I have enabled the form with LiveCycle Reader Extensions so that I can have data auto-populate from one form to another. However, I have to pay for an Extension license fee. I managed to find the pricing, and it's too expensive for my needs right now. I'm looking to share the forms with students, so this is not an option.
Scenario 4: The use HAS Acrobat XI. I can get data to auto-populate from one form to another and the user can complete and save on their local drive. This scenarios is not an option for me / Can't get students or schools to pay for a full license of Acrobat XI is not an option at this point.
Is my understanding correct? If so, I feel like I've hit a dead-end. The only cost-effective solution is to have a simple fillable form without the ability to auto-populate data between forms. Sigh.
Thanks.

LiveCycle ES2 - Auto Populate Date field when signed

Good afternoon,
I've got a signature field called "sgnPOC" and a date field called "sgnPOCDate" I'd like to have the date field filled in automatically when the sgnPOC is digitally signed.
I added the following to the postSign* event to sgnPOC.
FORM.Main.sgnPOCDate.rawValue = util.printd("mm/dd/yyyy", new Date());
and different variations including setting the date to yyyymmdd and like. It just won't auto populate. It passes the script check in the script editor.
any ideas?
Thank you.

Thank you,
I tried the following - to no success.
FORM.Main.sgnPOC::postSign - (JavaScript, client)
var myDate=date()
FORM.Main.sgnPOCDate.rawValue = Num2Date(myDate, "YYYY-MM-DD")
I also tried this
FORM.Main.sgnPOC::postSign - (JavaScript, client)
var myDate=date()
$.rawValue = Num2Date(myDate, "YYYY-MM-DD")
Which also did not work, but wouldn't that need to know where to put the date?

How do you use a drop down menu to populate other fields?

I am creating a PDF that upon choosing from a list of People their address, phone, etc will automatically come in the remaining fields, or if a new person is choosen than you can add names address phone and it will save for future referrence ?
Any help would be appreciated,
THank you

Thanks for your comment.
Try doing this:
Connect the form to a database and bind the fields in the form to the associated nodes in the data source so the data values automatically appear in the bound fields when a name is selected in the list.
Add scripting to the list of names so the associated fields for address and phone number appear only when the user enters a new name and needs the other fields to enter new data.
If that doesn't work, please provide more information about what you are trying to do. For example, here are a few questions to consider:
Q. What object are you using for the list?
Q. You say you want to be able to choose a person from a list of People, and their address, phone, etc automatically appears in the remaining fields address and phone number. What do you mean by etc. That is, exactly what objects are you planning to use for the other fields, and how many fields are there in total?
Q. Is your form connected to a data base, which can supply the data values for the address and phone number fields.
Q. What do you mean by 'a new person is chosen'. Normally the options on a list are pre-determined and added when you create the form. Do you want users to be able to add a new name to the list, and then enter that person's address and phone number in some adjacent fields?
Have a look at these sections in the Help to gain a better understanding of what's involved:
Working with Data Sources
http://livedocs.adobe.com/livecycle/8.2/acrobat_designer/000844.htmlhttp://livedocs.adobe.com/livecycle/8.2/acrobat_designer/000844.html
Buildling actions in forms
http://help.adobe.com/en_US/livecycle/9.0/designerHelp/000109.html#1627696
Thanks,
Drew

After inserting into one field using LOV, how to populate other fields ?

Hi,
I have a BLOCK based on a table (ex:EMP)
And I have a LOV on the field(item): EMPNO.
When I select one EMPNO from the LOV (when the field:EMPNO is populated with an emp number), the other fields should be populated
Can some body let me know, which trigger I need to use and .......
Thanks

while creating LOV at empno you can this query
select empno,ename,deptno from emp
and define return item for each column.
You can populate LOV manually at New_instance_item or Key_next_item
of item empno.

Ok, I have two itunes library account one for the PC and one for my Mac, I have my first iphone on my PC, but i just upgrade and I would like to use my new iphone on my Mac but all of my apps and other stuff is in the first library.. How do I put my apps

ok, I have two itunes librarys account, one for my PC and one for my Mac, I use the PC for my iphone, but I upgrade my iphone and all my apps and
stuff is on the first itunes library. How do I put the apps from one iphone to the otherusing two dirffernt itunes library? please help..

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

Auto populate other fields bases on the first 2 fields

Similar Messages

Maybe you are looking for