Auto printing transfer order issue

hi,
TO is automatically generated upon the MIGO GR MvT 101 based on the material doc#, TO supposes to print automatically at this point, but it just not happening! i have to manually print out through SP02, TO is in spool. the status is 'error" doesn't specify whats wrong with that though!
in another case, TO created by outbound delivery Mvt 601 printed automatically without probs! checked all setting haven't found anything wrong, any clues! thanks!
Edited by: qgjddcel on Dec 18, 2008 4:11 PM

What is the proper procedure/transactions for this? Is there any other way to solve this? This STO is about 5 months old, would that cause any issue?
thanks in advance.

Similar Messages

  • To print transfer order and storage unit labels in lt31

    Hi SAP Gurus
    1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed
    If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background
    2>Is it possible to print Transfer order and storage unit labels automatically when MIGO is posted.what are the settings required
    My client raised a query that before he was able to print both once Migo is posted .But now only trnasfer orders is getting printed but not SU.
    Requesting to help in this issues
    Thanks in advance
    Regards
    chandu

    you need to define the print control parameter in the customizing and whether you can print both(SU & TO) is depend on the print code which you specify in the setting under
    LE----WM---Activities-----Define print control
    After MIGO are you transferring the stock to SU managed storage type , as per STANDARD SAP stock goes to 902 which is Non SU managed so here you need to tell us the flow and the storage type where stock goes after MIGO also is that storage type is SU managed or not

  • Printing transfer order ( tx LT31 ) with smartforms ?

    Hi all,
    Is it possible to assing a smartform for printing transfer orders? I didn't find any informations about that in this forum...
    Thank you in advance !
    Olivier.

    No. The Transfer Order configuration can only accept the SAPScripts.
    But however there is a work around.
    Create a Smartform.
    You can create own your program to select the data for the transfer order and use the smartform in it.
    In the Configuration, you can assign this program and a DUMMY SAPScript name (you may leave the standard SAPScript name).
    Regards,
    Naimesh Patel

  • Printing Transfer Orders based on Manifest Number (Shipment Number)

    Hi All,
    We are on R/3 4.6c with Lean Warehouse Management.
    We have a requirement to be able to print Transfer Orders which are linked to a given Manifest - wondering if SAP has a standard way of doing this? 
    Sales Order 01 -> Delivery01 -> Transfer Order_01 \
    Sales Order 02 -> Delivery02 -> Transfer Order_02  ]----->>> Manifest_01
    Sales Order 03 -> Delivery03 -> Transfer Order_03 /
    We would to be able to say for 'Manifest_01' print all related Transfer Orders
    All help greatly appreciated.
    Thanks,
    Ravelle

    A solution has not been identified...query closed.

  • BAPI  Print transfer order (LT31)

    Hi,
    Is there any BAPI exist for Transaction LT31 Print Transfer Order?
    If anybody hv the code for finding BAPI for particular transaction?
    Thanks
    Sandeep

    Hi Sandeep,
                      check FM 
         <b>WS_LM_TRANSFER_ORDER_DISPLAY</b>
    <removed_by_moderator>
    Regards,
    Hemant
    Edited by: Julius Bussche on Aug 29, 2008 8:21 PM

  • To print transfer order by range

    Hi,
    I had 20 transfer order created and I would like to kick off the printing by selection on screen from TO#1 to TO#20.
    Is it possible to do so in LT31?
    There is a program, RLVSDR40 but it does not have any TCODE linked to it.
    Is there a standard TCODE to do so?
    Thanks

    Use LX21 there you have dynamic selection option.Select the option transfer order here you can give the range.
    To print a group of transfer orders by a single group number or for a range of group numbers:
    In the SAP menu, choose the path Logistics ® Logistics Execution ® Outbound Process ® Goods Issue for Outbound Delivery ® Communication / Printing ® Reprint Picklist

  • PRINT Transfer Order

    Hello Gurus
    I have this issue, where i have a Transfer Order, when i select Print, it is printing 3 copies of the TO's. i need to change the config so that when i print TO's , it shud print 2 copies only instead of 3 copies.
    Could you please help me with this issue.
    Thanks in Advance
    Nidhi

    Hello Nidhi,
    Check the settings in OMLV transaction code and change the quantity field in that.
    Hope this helps.
    Regards
    Arif Mansuri

  • Printing Transfer order

    Friends,
    Can you let me know....how do i print a TRANSFER ORDER FOR A GR SLIP.
    Regards,
    Sanjay

    Hi
    Please refer to the link below this should give you a good starting point to understand
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    Please let me know if you hev any specific question
    Thanks

  • Printing process order issue

    Process order of building A are printed in building B instead of building A. how to check why it is happening, data avaialble is Process order number and transfer order number.

    Hi Manu,
    Check the printer specification for Process Order in CB85 and find out how the output device is determined during printing, whether it is by user parameter (SU3), by print control (spool parameter) or by MRP controller.
    For transfer order, you may also check OMLV transaction.
    Regards,
    Julian

  • Print Transfer Order Immediately

    Hi,
    We are creating a transfer order immediately in background with the posting of every material document.
    Along with TO , we would also like to print TO immediately based on movement type.
    Could anybody please help with the configuration for immediate TO print.
    Regards
    Karan

    Hi Karan,
    In setting Logistic Execution> WM>Interface>Inventory mgt>Define mvt type, Set link for IM movement type to WM referance movement type. Next setting .."LE-WM interface to IM", here set link among Warehouse no. referance movement type to WM movement type, here set indicator for create TO immediatly to "A" . Prerequisites for this is WM movement types are configured.
    To have TO print, OMLV configuration needs to be done. Assign print code to movement type. Assign forms ( standered or customised) to print code, assign correct spool code here. Assign printer to warehouse movement.
    Hope this will help.
    Regards,
    Sudhir

  • Transfer order issue

    Hi all,
    There are six line items in delivery.
    When i am trying to create a transfer order with reference to the delivery, only 4 line items is appearing in TO.
    I checked and found that there are two TO's against the delivery and both are deleted.
    But in both the TO's one line item is confirmed so those line items in both the TO's was not deleted.
    I tried by creating a manual TO and take the stock back in by using 999 mvt.
    After i did that also, both the line items are not appearing in the TO against the delivery.
    How to proceed
    Regards
    KK

    Hi
    It seems there is some inconsisstency happened to this delivery. TO header says the it is deleted, but one of the TO line items are not deleted fully. That means LTAP line items still exists for those delivery line items(two line items)
    Best way try to reduce the delivery quantity for those two line items if possible and create new delivery.
    Try this and update
    regards,
    Ramana

  • Auto print of Goods Issue/Transfer Posting Documents by Movement type

    Hi,
    We have created two different output types to print the layout's of Goods Issue/Transfer Posting Documents.
    The requirement is to default the message in the document by movement type (key combination)
    Meaning if it is 201 it should populate GI output type
    If it is 313 it should populate TP output type.
    we do not have any standard key combination  (NACR) by movement type wise.
    Any alternative way of meeting this requirement?
    Thanks
    Regards
    Ram

    Hello Kevin,
    I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
    This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
    Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
    A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
    Success and thanks beforehand for any credits!
    Kind regards,
    Bart

  • Transfer order print issue

    Transfer order label of building A are printed automatically in building B instead of building A. how to check why it is happening, data avaialble is Process order number and transfer order number." what are the steps to select the right printer?

    for answer: Printing process order issue
    tcode : OMLV

  • Transfer order Printing Error

    Hello,
    I have two issue with tranfer order
    1) We are printing transfer order through network order CN23 .The part has been issued to network order from 3 Group WBS element .So when we are printing the Transfer order it is just printing one WBS element on transfer order not the other two of them.So is there a configuration setting for the trnasfer order to print all the WBS element?
    2) When the user is printing tasfer order from his profile LT31 and including all the setting plus defined printer as LOCL the transfer order is not getting printed .Only when he is going to SP02 it is getting printing .So i guess there must be some setting that is missing in printer config .I checked in OMLV but couldnt find one .Can any one pls help.?

    Thanks for the reply Abhijit.I saw in OMLV in Print code that the printer has been set to 02 so does that mean it is going to Spool? If so how can i change the setting back to print immediately ?what needs to be done in printer setting to get that print immediately.
    My first question is related to Transfer order print out .We have network order which has 3 WBS elements from which the component has been issued.So when we print the transfer order via LT31 it is only printing one WBS not the other two of them.So my question is is there a way in config to change the Transfer order so that it print all the WBS element or it should be done via coding?

  • Transfer Order Printing using smart forms

    Hi All
    Our requirement is to print Transfer Order  ( WM ) for Goods Receipt & Delivery using Smart forms.
    Can we change the existing standard format (SAP script ) and use our own form(smart form ) to include some other data & print.
    If possible how to replace the SAP script to Smart form.
    Request  someone could guide in detail.
    Thanks in advance.
    Samson

    Hi
    When you create Smartform try to replace it in customizing OMLV. Not sure if it will work as it refers to Sap Scirpt in help description.
    It is also possible to write Z program for TO printing and hardcode SmartForm there.
    Regards
    Mariusz

Maybe you are looking for