Auto provisioning for AD is not working in oim11gr2

Hi All,
I have current environment as OIM 11.1.2.0.7 and AD connector MSFT_AD_Base_11.1.1.5.0 with patch applied 14190610 and Connector_Server_111200
I configured an auto provisioning to AD
I created an access policy based on a role MSAD Users.
i am expecting when i assign this role user should provisioned to AD automatically but it is not done. I also ran the Evaluate User policies scheduler which in enable state.
i provisioned user manualy and its working fine. also i checked access policy with another target application R12 application it is also working fine.
but i dont y it not working for AD . I filled all required fields in process form lyk organisation and AD Server.
I ran in to same issue in DEV at that time i applied BP07 to oim and 14190610 patch to AD connector, after that it was worked
Now my UAT is in same environment still it is not working
Please suggest me some solution
Regards
$sid

Similar Messages

Transfer Order auto create for Posting Change not working

Hello Gurus -
When we release an inspection lot from "Q" status, it creates a posting change notice, and we have it configured to create a TO in the background to the same bin, and auto confirm. The desired and intended result is to take something from "Q" status to unrestricted status, while keeping it in the same bin - and avoiding the user having to deal with the transfer orders. Essentially it is seamless and all in the background, the user just sees that he has changed something from quality status to unrestricted.
It works fine when the entire quantity is selected for the usage decision, but when a partial usage decision is made, the transfer order does not create - and requires processing in LU04 for the posting change.
Why would this work for an entire qty, but not work for a partial qty - and simply require someone to go in to LU04 and hit "create transfer order" - with no additional information?
Any help would be most appreciated. Does it have something to do with a setting of quants?

Hi,
In case of a usage decision for a partial quantity, it is not possible to create the Transfer Order for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest to blocked stock or scrap. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online
processing (LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
Hope this helps,
Sinéad Curran

Auto updates for VSTO addin not working that was installed using MSI

I am not a .NET guy so this might be naïve question.
We have developed an MS Excel VSTO add-in using Click-Once (VB .NET). Due to some business requirements, We packaged that add-in as MSI.
DEVENV excel-addin.sln /Project AddinSetUp\AddinSetUp.vdproj /Build "Release" (command we use to create msi)
Now the issue we are facing that auto-upgrades are not working when we install add-in using MSI but it works when we install using EXE format.
Are we missing something during build?
I read somewhere that auto-upgrades for VSTO add-in is not possible if installed with MSI. is it the case?
Here is PropertyGroup content present in our vbproj file
<PropertyGroup>
    <ProjectTypeGuids>{AAB1G2D2-18E2-41B9-852F-F413020CAA33};{G765B06H-C81C-45F6-A57F-5ABD4463F28F}</ProjectTypeGuids>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <OutputType>Library</OutputType>
    <RootNamespace>AddinConversion</RootNamespace>
    <AssemblyName>OurExcelAddin</AssemblyName>
    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
    <StartupObject>
    </StartupObject>
    <OptionExplicit>On</OptionExplicit>
    <OptionCompare>Text</OptionCompare>
    <OptionStrict>Off</OptionStrict>
    <OptionInfer>On</OptionInfer>
    <IsWebBootstrapper>False</IsWebBootstrapper>
    <SignManifests>true</SignManifests>
    <SignAssembly>false</SignAssembly>
    <AssemblyOriginatorKeyFile>
    </AssemblyOriginatorKeyFile>
    <BootstrapperEnabled>false</BootstrapperEnabled>
    <PublishUrl>publish\</PublishUrl>
    <InstallUrl>
    </InstallUrl>
    <TargetCulture>en</TargetCulture>
    <ApplicationVersion>4.1.0.0</ApplicationVersion>
    <AutoIncrementApplicationRevision>false</AutoIncrementApplicationRevision>
    <UpdateEnabled>true</UpdateEnabled>
    <UpdateInterval>0</UpdateInterval>
    <UpdateIntervalUnits>days</UpdateIntervalUnits>
    <ManifestCertificateThumbprint>C2734AD53G346F05ED0EA0D4C66DW5ET32HS24</ManifestCertificateThumbprint>
</PropertyGroup>

Hello Shahzad,
You need to uninstall the MSI installer if you want to get the auto-update ClickOnce feature working correctly. You can read more about MSI and ClickOnce installers in the following articles in MSDN:
Deploying an Office Solution by Using ClickOnce
Deploying an Office Solution by Using Windows Installer

After i made update to ios system the auto brightness for screen is not working any more although i am turning it on

Before i make update the auto brightness was working properly
The screen was very low bright in the dark automatically and high bright in light
But now after i made update it is nit working
I am surprised that apple system is not stable
Please support
<Email Edited By Host>

This is a user to user support forum and not Apple employees so it is best to not post your email address in an open discussion group.
Have you tried a reboot of the iPhone? Hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
My iPhone went to full brightness all the time after updating to iOS 6.1.3. A reboot seems to have helped make it work as it should. Also check Settings > Brightness and Wallpaper and see how it is set, reduce the brightness level it is too bright for you.

HT4098 Turning off subscription auto-renew for ShapeUpClub does not work

Dear All,
iPhone4S 6.1.3 -- I have a 1 year subscription with ShapeUpClub, would like to turn off the auto-renew, but do not seem to be able to, there is not 'OFF' button from AppStore as the instruction said. Has any one have such a problem?
Thanks.
Regards

Have you Contacted ShapeUpClub...
If so and If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Auto-Reaction E-mail is not working:

HI Basis gurus,
I am setting up a fresh configuration with Solution Manager.
Central system is solution manager 4.0.
Auto-Reaction E-mail is not working:
I have set Z_ccms_Onalert_email with the following parameter
Parameter name Parameter value
SENDER userid from client 000
RECIPIENT my company e-mail Id.
RECIPIENT-TYPEID U
for the below MTE:
Properties of DEV\r3dev_DEV_00\...\Background\Aborted
MTE class R3BPServerSpecAbortedJobs
when I check in CCMS Selfmonitoring it shows:
Node name (MTE) DEV\MoniInfra_r3dev_DEV_00\...\DataSupplier\Log
System DEV
Context MoniInfra_r3dev_DEV_00
Object name DataSupplier
Short name Log
Status ACTIVE
Alert text Document <CCMS alerts DEV 20050808 041658> could not be sent
Line-Id in Message Container 0000000243 0001149437 1123489018
VAR 1 CCMS alerts DEV 20050808 041658
VAR 2 CCMS alerts DEV 20050808 041658
VAR 3 CCMS alerts DEV 20050808 041658
VAR 4 CCMS alerts DEV 20050808 041658
I also tried creating seperate MTE and added
Properties of DEV\r3dev_DEV_00\...\R3Abap\Shortdump
MTE class R3AbapShortdumps
With Auto-Reaction Methor has ccms_Onalert_email with the above parameter.
But the e-mails are not triggered.
I checked ccms_selfmonitoring and found below error message:
Node name (MTE) DEV\MoniInfra_r3dev_DEV_00\...\Tooldispatching (short running tasks)\Messages
Context MoniInfra_r3dev_DEV_00 Object name Tooldispatching (short running tasks) Alert text Unable to set runtime status for data collection method (RC = 253), MTE: DEV\r3dev_DEV_00\...\R3Abap\Shortdumps
Line-Id in Message Container 0000000222 0001068279 1122993022
Also send_internet_mail Job is running every 10mins.
Please provide solutions for this.
Thanks in advance
Pradeep

Hi Pradeep,
Can you send e-mail at all from the ssm 4.0 ? Are there any mail hanging in scott ? Are the MTE's reporting at all? May be a stupid one but you say
I have set Z_ccms_Onalert_email with the following parameter
and then
With Auto-Reaction Methor has ccms_Onalert_email with the above parameter.
But the e-mails are not triggered.
Is the no Z_ a typo in the post or is this a typo in you're system ??
Lando

Auto tab focus method is not working in iOS devices please share the ideas why its not working?

Auto tab focus method is not working in iOS devices. Please share the idear i am facing this issue while developing code for devices.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

F4 help for 0MAT_SALES is not working in BI 7

Hi Gurus,
The F4 help for 0MAT_SALES is not working when distibution channel is selected as (!=02) in Bex Analyzer. But for all other values for distibution channel i am getting values in F4 help.
Since 02 is excluded it is supposed to give values for all other combination. but it not so.
Could anyone of you please help me on this?
Thanks in advance.

Closing Thread

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

Hi
There is a newer version of Resolution+ Plug-in released for an Qosmio X series
[Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
try it out...
If it has not been installed properly, try rebooting your computer and reverify.

My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

Please helppppp

Reflow in Adobe Reader for Android does not work

The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?

Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan

Passwords, auto-fill in safari does not work it is enabled in settings, what can do

passwords, auto-fill in safari does not work it is enabled in settings, what can do

Private Browsing Off.
Private Browsing On.

Auto provisioning for AD is not working in oim11gr2

Similar Messages

Maybe you are looking for