Auto-reaction email with SOLMAN

Hello,
i have configured the the satellites in solution manager (monitoring, EWA...). Now i want configure auto-reaction emailing such availavility, but in the rz20 of SOLMAN i don't find the monitoring parameters of satellites. My question is: if i want auto-reaction configuration for each satellite, i have to configure it in each satellite, otherwise, i can configure it centrally from SOLMAN?
Thanks in advance
Regards
Carlos

Hi Carlos,
As Thomas mentioned , if you are intrested only in availability checks of satellite systems , you have to install only CCMSPING . SAPCCMS4x isnt required.But if you like to monitor other alerts like system logs , job failure , table space monitoring etc etc and want to set up auto reactions you have to install sapccms4x.
For CCMSPING isntallation , go through
http://service.sap.com/monitoring --> Monitoring in Detail -->Availability Monitoring and Agent CCMSPING
Thanks
Prince Jose

Similar Messages

How to format CCMS auto-reaction email ?

Hi,
I have setup CCMS auto-reaction with solution manager. Please advise whether i can formatted the email more nicely because the standard email format is very basic.
Thank you and best Regads
Fernand

Hi Fernand,
when using the "classic" mailing method, you can not change very much, especially the header leaves unchanged.
But - before changing any function modules - have a look at the delivered method CCMS_OnAlert_Email_V2.
There you have various possibilities for changing the header directly in method definition (RZ21). The way ahead looks like this:
1.) copy CCMS_OnAlert_Email_V2 to Z_MailTest01 (or whatever you like ..--))
2.) Customize your copy, have a look at the parameters SUBJECT_ALERT and SUBJECT_ALERT_CONT. Here you can place your own header text.
3.) Extending the header text by variables: the method supports dynamic values for several MTEs, e.g. $SID, $NODENAME
Further possibilities:
4.) Having done 1-3, you have mails from the same sender (the CEN system). Here you can copy the method and change the sender...
5.) If you want to change the body, you need to create your own alert messages. The effort doing this is little, the effect is great!
Have a look at SE91 and create your own message class (example: Z_CCMS).
And all this without any change in standard coding. Enjoy CCMS!!
Any further questions? Just post!
Hope this helps you!
Kind regards,
Dirk

Auto-reaction method not sending e-mail

Hi everyone,
We are trying to set-up email notificacions for cancelled jobs. So far I've configured SCOT and RZ20 succesfully. The alerts are triggered and the auto-reaction method is active and ready but it's not sending automatics e-mails. If I click on the auto-reaction method status and manually start auto-reaction method it sends the e-mails, but I haven't been able to make it work automatically.
So far I've read every possible thread in SAP forums about the issue and I also have checked the following notes:
Note 671780 - Only trigger auto-reaction method with certain alerts
Note 502959 - RZ20: External e-mail as auto-reaction
Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 760821 - Auto-reactions no longer work with email
Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 176492 - Automatic email when an alert occurs (RZ20)
I have tried all the possible control options for method CCMS_OnAlert_Email (currently is executed as a periodically job). I have checked all the jobs generated in RZ21 and still can't get it to work.
This e-mails alerts are to be triggered locally by each SAP productive system. I've already tried to configure this monitoring alert in two of our developing system with similar behaviour: no automatic e-mail is getting send.
Please, advice me on what I should do. I know I'm missing some
configuration but I can't figure out which one.
Best regards

Is the job SAP_CCMS_MONI_BATCH_DP running?
Please note the run time status: "Run required" means,
the alert was triggered, but the auto-reaction method does not start until the next time the CCMS method dispatcher (SAPMSSY8) runs. This can last up to 5 minutes if alerts are generated asynchronously (for example, by an active data collector).
However, the next time the CCMS method dispatcher runs, the auto-reaction method should be executed and the status of the node should be READY.
If the RUN_REQUIRED status does not disappear, it could be for a number of reasons:
- If MTE is present on the local system:
The auto-reaction method must not be defined as the central auto-reaction method.
- If MTE is present on another monitored system and a central auto-reaction method was defined:
Is one of the above true in your case?
An agent from the monitored system must be logged on to the central system, and this agent must be active. Please check whether these agents are active or not in Rz21 and try Re-Registering it.
You can also refer to SNOTE: 939616, 1265906
In the below link search for "RUN required"
http://help.sap.com/saphelp_nwpi71/helpdata/en/49/945f2b9ee72222e10000000a42189d/content.htm
Regards,
Arjun

SAP MTE Auto-Reaction to delete spool from satellite

Hi,
Please could anyone HELP me in setting up the SAP MTE Auto-Reaction to delete spool from satellite system with the threshold in CCMS reaches 80% using a event triggered background Job.
Regards,
Pramod

Hi,
Hav you ppl try to create your own Auto reaction method with te report RSPO0041, i guess we can proceed like this.
and check this too [http://help.sap.com/saphelp_nw04/helpdata/en/27/cbdf3b8dc95136e10000000a114084/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/27/cbdf3b8dc95136e10000000a114084/frameset.htm]
Thanks,
Jansi

Auto-Setup Emails Fail with kGotAuthenticationFailure

If I set up my people with a shortname of "first.last", the auto-setup email fails to work when they click the setup button with "kGotAuthenticationFailure."
I do the dot in the shortname to facilitate more organized email addresses. I could do this by adding an alias, but I've found this confuses users as some services (like the wiki) only accept the true shortname.
I would really like for the auto-setup emails to work. Any suggestions for a fix?

Are the client Macs all created from a central image? If so, yes, it's a Kerberos key failure. The local KDCs need to be flushed from the image or from each Mac before you do your bind. Also good idea to discard the system keychain while you're at it.
Here's a simple sh script to do it.
#!/bin/sh
\# Delete System Keychain
rm -rf /Library/Keychains/System.keychain
\# Delete the local KDC database
rm -rf /var/db/krb5kdc
\# Regenerate the local KDC
/usr/libexec/configureLocalKDC
Message was edited by: thesunnyape
Message was edited by: thesunnyape

AppleScript for Auto Reply to an email with an Attachment????

Forgive me. All this applescript stuff is fairly new to me. I've set up my Entourage email to automatically reply to certain rules that I have created. Well, I'm trying to have an attachment added to those auto replied emails. How can this be done? I'v researched for days and can only find stuff concerning Outlook Express which you are apparently given an option to add an attachment other than the mere text reply. Any info would be great!
Thanks much,
Robert

try this Robert, works here for me using Entourage 11.3.3
tell application "Microsoft Entourage"
set theOrigionalMessage to the current messages
end tell
repeat with theMsg in theOrigionalMessage
my ProcessMsg(theMsg)
end repeat
on ProcessMsg(theMsg)
tell application "Microsoft Entourage"
activate
set theSender to sender's address of theMsg
set theSubject to "Heres your attachment"
set theBody to "test"
set _Attachment to "Macintosh HD:Users:Budgie:Desktop:TEST.txt" as alias
set MyReply to make new outgoing message with properties {recipient:theSender, subject:"Hello: " & theSubject, content:theBody}
make new attachment at MyReply with properties {file:_Attachment}
open MyReply --comment out if you dont need to view
--send MyReply -- un comment to send without viewing
end tell
end ProcessMsg
Budgie

Where does Mail keep its hidden cache of auto-complete email addresses. I am plagued with an incorrect email adress I can't get rid of. Have made sure it's deleted from Contacts and made sure it's deleted from "previous recipients" list in Mail - i

Where does Mail keep its hidden cache of auto-complete email addresses. I am plagued with an incorrect email address I can't get rid of. Have made sure it's deleted from Contacts and made sure it's deleted from "Previous Recipients" list in Mail. But it still keeps reappearing ... obviously a secret cache file hidden somewhere?

Autocomplete has nothing to do with this problem.
From the Mail menu bar, select
Window ▹ Connection Doctor
Look for a disused SMTP (outgoing mail) account in the window that opens. Double-click it. Another window will open, showing a list of all the outgoing mail accounts. The unwanted one will be selected. Click the minus-sign button to delete it, then click OK.
If there's more than one unwanted account, repeat.

How to auto save output with date added to file name, and email the results?

Hi,
We found a script to capture disk space usage, that automatically places the results into an Excel file. We would like the script to autosave this file to a specific directroy with the date ran as part of teh file name. We would then like these results to
be emailed to us if possible. (also if possible to highlight cell in red that is 5% OR less available disk space would be great)
Here is what we have:
$erroractionpreference = “SilentlyContinue”
$a = New-Object -comobject Excel.Application
$a.visible = $True
$b = $a.Workbooks.Add()
$c = $b.Worksheets.Item(1)
$c.Cells.Item(1,1) = “Machine Name”
$c.Cells.Item(1,2) = “Drive”
$c.Cells.Item(1,3) = “Total size (GB)”
$c.Cells.Item(1,4) = “Free Space (GB)”
$c.Cells.Item(1,5) = “Free Space (%)”
$c.cells.item(1,6) = "Name "
$d = $c.UsedRange
$d.Interior.ColorIndex = 19
$d.Font.ColorIndex = 11
$d.Font.Bold = $True
$d.EntireColumn.AutoFit()
$intRow = 2
$colComputers = get-content "C:\Servers.txt"
foreach ($strComputer in $colComputers)
$colDisks = get-wmiobject Win32_LogicalDisk -computername $strComputer -Filter “DriveType = 3"
foreach ($objdisk in $colDisks)
$c.Cells.Item($intRow, 1) = $strComputer.ToUpper()
$c.Cells.Item($intRow, 2) = $objDisk.DeviceID
$c.Cells.Item($intRow, 3) = “{0:N0}” -f ($objDisk.Size/1GB)
$c.Cells.Item($intRow, 4) = “{0:N0}” -f ($objDisk.FreeSpace/1GB)
$c.Cells.Item($intRow, 5) = “{0:P0}” -f ([double]$objDisk.FreeSpace/[double]$objDisk.Size)
$c.cells.item($introw, 6) = $objdisk.volumename
$intRow = $intRow + 1
$d.EntireColumn.AutoFit()
cls
Thank You

Hi Phorbin1128,
The script below amy be helpful for you to save the Excel file with date in filename, and send email with the attachment of the excel report.
$erroractionpreference = “SilentlyContinue”
$a = New-Object -comobject Excel.Application
$a.visible = $True
$b = $a.Workbooks.Add()
$c = $b.Worksheets.Item(1)
$c.Cells.Item(1,1) = “Machine Name”
$c.Cells.Item(1,2) = “Drive”
$c.Cells.Item(1,3) = “Total size (GB)”
$c.Cells.Item(1,4) = “Free Space (GB)”
$c.Cells.Item(1,5) = “Free Space (%)”
$c.cells.item(1,6) = "Name "
$d = $c.UsedRange
$d.Interior.ColorIndex = 19
$d.Font.ColorIndex = 11
$d.Font.Bold = $True
$d.EntireColumn.AutoFit()
$intRow = 2
$colComputers = get-content "C:\Servers.txt"
foreach ($strComputer in $colComputers)
$colDisks = get-wmiobject Win32_LogicalDisk -computername $strComputer -Filter “DriveType = 3"
foreach ($objdisk in $colDisks)
$c.Cells.Item($intRow, 1) = $strComputer.ToUpper()
$c.Cells.Item($intRow, 2) = $objDisk.DeviceID
$c.Cells.Item($intRow, 3) = “{0:N0}” -f ($objDisk.Size/1GB)
$c.Cells.Item($intRow, 4) = “{0:N0}” -f ($objDisk.FreeSpace/1GB)
$c.Cells.Item($intRow, 5) = “{0:P0}” -f ([double]$objDisk.FreeSpace/[double]$objDisk.Size)
$c.cells.item($introw, 6) = $objdisk.volumename
$intRow = $intRow + 1
$d.EntireColumn.AutoFit()
$date=Get-Date -f yyyy-MM-dd
$filename = "D:\test\"+$date+".xlsx"
$b.SaveAs($filename)
$a.Quit()
Send-MailMessage -SmtpServer xxxxxxxxxx -To [email protected] -From [email protected] -Subject "test mail" -Body "file name is: $new_file" -attachment $filename
For more detailed information about the cmdlet Send-MailMessage, please refer to this article:
Send-MailMessage
I hope this helps.

I have an iPad air and have downloaded the microsoft app excel. I have an email with an excel attachment. When I "tap to download" the attachment, it auto converts to a PDF file. I want it to open in excel. Please help.

I have an iPad air and have downloaded the microsoft app excel. I have an email with an excel attacment. When I "tap to download" the attachment, it automatically converts to a PDF file and opens as a "view only" document. I want it to open with the excel app so I can see and update the spreadsheet. Please help. Thanks!

If Excel works as do other apps, you should be able to tap and hold on the attachment and then select "Open in Excel" in the window that will open. Note that you need to be subscribed to and signed into Office 365 to be able to edit documents in Microsoft's apps.
Regards.

Automatic SMS/Mail notification for local auto-reaction method

Hello!
We would like to be informed via SMS/Mail about the Availability of satellite system.
When we assign a Local auto-reaction method for this MTE (Availability_SysPercent_ABAP) we receive the SMS/Mail notification only in case we manually start the auto reaction method from RZ20.
When we try to assign the central auto reaction method from RZ20 we get the following error:
Assignment for local system only works with nodes from agent segments
What is the procedure for the automatic SMS/Mail notification in case of local auto-reaction method?
Thank you very much!

Dear Team,
As I have understood, you want to be informed each time a satellite system is not up and running ?
Option 01
========
1. Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satelittes systems ...
3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
    in RZ21 (point 2).
This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
Option 02
========
1.Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satellites systems.
3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
    Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
4. Select one satelitte system
5. Open "Availability"
6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
7. When selected, click on "Properties" button.
8. Then, you assign here an auto-reaction method - for example :
    "ccms_send_alert_to_alm_ccms_containerv4".
9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
10. In this method, add you email address.
11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
12. Then, the alert will be automatically sends to your email adress.
Hope it helps ?
Best regards
SAPNetWeaverAdmin

Auto-Reaction Method - External Operating System Command

Hello ,
I am trying to run a script (test.cmd) on a monitored java system out of solution manager via ccms auto-reaction method, but without success.
I have created a RFC Connection to the java system in transaction sm59, defined an external operation command in transaction sm69 (/usr/sap/test.cmd) and an auto-reaction method using that command. But when I test the command in transaction sm49 with the RFC connection as target destination, the command is executed on the local CEN system (SolutionManager system) instead of the monitored java system. I have no clue where's the problem???
Thanks for any help (points, points, points)
Mirko

Hi Anand,
can you please send me that doc too pleae.
[email protected]
I really appreciate your help.
Thanks,

Local auto reaction method no longer linked to MTE

Strange one.... all my local autoreaction methods have disappeared from from my MTE properties in RZ20. The methods still exist in RZ21 and the 'where used' reports that it is still inked to that MTE. Have checked that the mehtod is released for variant * (which is the acitve variant).
Any ideas would be helpful as the only option is to link the methods again manually.....which is mind numbing task. Anyone got a way of linking an autoreaction method (local) to multiple MTE's?
Thanks in advance,
Marcus

Dear Team,
As I have understood, you want to be informed each time a satellite system is not up and running ?
Option 01
========
1. Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satelittes systems ...
3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
    in RZ21 (point 2).
This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
Option 02
========
1.Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satellites systems.
3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
    Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
4. Select one satelitte system
5. Open "Availability"
6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
7. When selected, click on "Properties" button.
8. Then, you assign here an auto-reaction method - for example :
    "ccms_send_alert_to_alm_ccms_containerv4".
9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
10. In this method, add you email address.
11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
12. Then, the alert will be automatically sends to your email adress.
Hope it helps ?
Best regards
SAPNetWeaverAdmin

CCMS Auto Reaction Methods in XI AlertFrameWork

Team,
I have setup my XI box to report all CCMS errors to the ALM framework. The scot tcode has been also setup to receive email.
With MBA (Message Base Alert), such as mapping error, receiver not found, etc, I have access to a list of "containers variable" to report detail about the error.
How can I do the same with all errors I get in CCMS ? The errors get replicated to my ALM framework (and thus can be seen in the AlertInbox), but I have no handle on variables container ...
Thank in advance !
A+

Hi Jose,
yes i have tried to changed to P and to whatever you can imagine but no success, could it be because im trying to do this on IDES?
a bit summarizing of what have I done till now.
I have created in client 000 a shared folder called CCMS_ALERTS, I have configured in RZ20 in menu SAP CCMS Monitor Templates --> Syslog --> Security in this way
Everything has been done in client 000
In General Tab i have:
Message Class: RT
Message Number: 079
Severity of alerts to be triggered: 255
Maximum numbers of alerts kept: 10
Which alerts should be kept: ALL
In Log Attribute Tab i have:
Maximum alerts
Always
As many as possible
In Filter Tab I have:
System log message is selected (ticked)
the i have filter
from ID - US1 to ID US1 at Red (ticked) with severity 255
In the method tab i have:
My Own method that i have created and here it is:
Method (rz21)
Execution Tab:
as Functional module - SALO_EMAIL_IN_CASE_OF_ALERT
on any server
Table fo several MTEs
Control Tab:
Periodically in dialog process (short running program)
Parameter Tab:
SENDER: my user (existing in any of the clients with administrator rights)
RECIPIENT: CCMS_ALERTS
RECIPIENT-TYPEID
Release Tab:
Auto-Reaction Method
Please advice what have I done wrongly
Vladi,

Auto-reaction's - E-Mails

We use ccms on solman 3.2 and have assigned Auto-reaction's to specific events in the satellite systems.
When an event occur, an e-mail is sent.
Question:
Where do I add and delete e-mails addresses for a specific auto-reaction?

Check the Auto-reaction method , CCMS_OnAlert_Email(_V2) / Z:CCMS_OnAlert_Email(_V2) if you copied it to your own name
Double click on the method and go to parameter tab and you can see/change the email there
Thanks
Prince Jose

Auto-reaction by mail

Hello gurus,
I'm trying to configure the CCMS so it will send alerts to mails.
-I've configured the SAPConnect and checked it. A mail from SBWP appeared in my outlook account.
-I've followed the instruction of:
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies
and configured the central-auto-reaction.
-CSMCENTOOL table is empty, that means that there are no alerts to send ?
Please help me to configure the Central-Auto-Reaction.
kind regards,
Dimitry Haritonov

Helo Dimitry,
Found a similar thread.
Re: Configuring the Alert monitoring of Solution Manager 4.0
Hope this is helpful in ur quest.
Br,
Sri
comment from the thread Read :
"Hi Yagel,
the question is, how do you want to be notfied by the alert. Via email? For this, you have to configure your alert monitor (e.g. like described in the mentioned Blog) and configure SAP Connect (and SMTP, see note 455140), so that you are able to send emails from the SAP System to your office-email-adress or so.
I have tested some time ago the autoreaction methods with emailing and after configuring the SAP Connect correctly, it wasn't a big problem.
Best regards,
Kai
Message was edited by: Sri Raghu Kishore Pusapati

Auto-reaction email with SOLMAN

Similar Messages

Maybe you are looking for