Auto-reboot when going Home from Pages

5S with iOS 7.01, pressing the Home button to switch to the Home screen from the new Pages app reboots the phone every time (screen goes blue, then the phone reboots). Anyone else having this problem?

Looks like the reason were two documents created during the public Beta phase. When I pressed Home with either document up, the Home screen briefly appeared, then turned blue, and the iPhone 5S rebooted itself. However, with the default Apple "Getting Started" document, no problem. Pressing the Home button brought me back to the Home screen. No "blue screen of iOS death."

Similar Messages

  • Auto reboots when battery is lower than 50%

    Hi, I have my 4s 16gb from this year Jan. I knew that Iphone 4S long have a problem with the battery. It is horrible but recently my unit will auto reboot when the battery is lower than 50%............ which I can only use my phone with 3G for 4 h then have to recharge........... Plz help!!!

    JUst in windows or osx too?

  • Solaris 8 in ultra 2 got panic and auto reboot when install Oracle software

    Dear all,
    I installed Solaris 8 by selecting 'Entire Solaris Software Group' and select 32 bit support only in an old ultra II machine. Then I tried to install Oracle 8.1.7 in the same machine but machine always got panic and started auto reboot when Oracle installed about 17% or 20% or even 70% (I tried install the minimum of Oracle).
    What is the problem? Anyone can help?
    Thanks in advance,
    Vicky

    I think you need to check the parameters like SHMMAX etc in /etc/system file as recommanded by oracle if not already added you need to add them .Oracle manuals have a list of these parameters and don't forget to reboot and boot with boot -r after adding these parameters.
    Make sure you have sufficient memory or some patch recommanded by Oracle .
    Hemant
    http://www.adminschoice.com

  • X200s sometimes hangs/freezes when goes back from sleep

    There is a confirmed bug in ubuntu jaunty/karmic running on lenovo x200 series notebooks. Shortly, it sometimes hangs/freezes when goes back from sleep mode.
    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842
    Does anyone know anything  about it? How do i contact lenovo engeneer about it?
    Here is filled bug report in ubuntu bugtracker: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842

    There is a confirmed bug in ubuntu jaunty/karmic running on lenovo x200 series notebooks. Shortly, it sometimes hangs/freezes when goes back from sleep mode.
    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842
    Does anyone know anything  about it? How do i contact lenovo engeneer about it?
    Here is filled bug report in ubuntu bugtracker: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842

  • Auto refreshing when going from tab to tab

    Recently my Macbook has started to refresh every page when I switch from tab to tab.  Previously this didn't happen and it is very annoying.  Does anyone have a solution please?

    Thanks...I did that?..auto change was on...and Denver was the time zone designation.  I turned it off and then went in and changed the city to Ptown, then reset auto change and instantly the correct time was available...I appreciate your knowledge and help!!!  Thank you

  • Recieved 404 error after removing "home" from page hierarchy

    I am using JDeveloper 11.1.1.6.0 and I beleive it is WebCenter SP5.
    I am encountering a 404 page when I run an application after I try removing the entry for "home" from the page hierarchy. I also receive the error even if I undo the change in the pages.xml and restore home. I get this in brand new projects as well by following these steps:
    -Create a new WebCenter Portal Framework application
    -Open up pages.xml
    -Delete the "home" entry
    -Save
    -Ctrl+z to undo the deletion of the entry
    -Save
    -Run
    -Recieve 404 after index.html attempts to have the redirect to its default "./faces/wcnav_defaultSelection"
    I am assuming some other files are being modified but I cannot figure out what is going on. I also cannot find any information on how the application determines where to go with the "wcnav_defaultSelection" redirect. Is anyone able to assist with this?

    Hi,
    May I suggest that you enable TRACE logging for oracle.webcenter.portalframework.sitestructure and see what the logs say?
    Also, adding the home page back to page hierarchy (via drag-drop) does not throw the error. It's only when you perform an Undo that the error occurs.
    On further analysis, on "Undo" the home page definition does not get back some of the attributes - the page_parent parameter and the permissions section.
    Edited by: Bijesh Krishnadas on Oct 22, 2012 10:07 AM
    Edited by: Bijesh Krishnadas on Oct 22, 2012 10:15 AM

  • Need to stop playback of an FLVPlayback component when navigate away from page!

    I have an movieclip playing as auto start on the first page of my website.  The component continues to play when I navigate away from the page.  How can I stop the playback of the movie if it has not completed when navigation away from the page is invoked.  I have search and am unable to find such an event using an FLVPlayback component.  Presently there is no code in actionscript to display here.
    thanks

    Hi, this is the entire code that is placed on the timeline in frame 1 of the AS line.  There is now an error and the FLVPlayer component, which is also begin in frame 1. At this point there is one method that I thought should work when the vTinesDayBtn is clicked.  However, is not.
    The error is:
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at ewddSite_fla::MainTimeline/vTines()
    ArgumentError: Error #1063: Argument count mismatch on ewddSite_fla::MainTimeline/stoppedVid(). Expected 0, got 1.
    The code is:
    stop();
    import flash.events.*;
    import flash.display.*;
    import fl.video.*;
    import fl.video.FLVPlayback;
    function stoppedVid() {
      vidPlay.stop();
    vTinesDayBtn.addEventListener(MouseEvent.CLICK, stoppedVid)
    function vTines(evt:MouseEvent):void {
    gotoAndStop(20);
    vidPlay.stop();
    function engagements(evt:MouseEvent):void {
    gotoAndStop(25);
    function weddings(evt:MouseEvent):void {
    gotoAndStop(30);
    function births(evt:MouseEvent):void {
    gotoAndStop(35);
    function birthdays(evt:MouseEvent):void {
    gotoAndStop(40);
    function graduations(evt:MouseEvent):void {
    gotoAndStop(45);
    function anniversaries(evt:MouseEvent):void {
    gotoAndStop(50);
    function specEvents(evt:MouseEvent):void {
    gotoAndStop(55);
    function memorials(evt:MouseEvent):void {
    gotoAndStop(60);
    //main.addEventListener(MouseEvent.MOUSE_DOWN, mainPg);
    vTinesDayBtn.addEventListener(MouseEvent.MOUSE_DOWN, vTines);
    engageBtn.addEventListener(MouseEvent.MOUSE_DOWN, engagements);
    weddingsBtn.addEventListener(MouseEvent.MOUSE_DOWN, weddings);
    birthsBtn.addEventListener(MouseEvent.MOUSE_DOWN, births);
    bDaysBtn.addEventListener(MouseEvent.MOUSE_DOWN, birthdays);
    graduBtn.addEventListener(MouseEvent.MOUSE_DOWN, graduations);
    annivBtn.addEventListener(MouseEvent.MOUSE_DOWN, anniversaries);
    spEventsBtn.addEventListener(MouseEvent.MOUSE_DOWN, specEvents);
    memorialsBtn.addEventListener(MouseEvent.MOUSE_DOWN, memorials);

  • Double spacing issue when pasting text from Pages

    I have a Pages document with text that frequently paste into a message that is generated by the Dropbox iOS app when I choose the e-mail option within Dropbox iOS app.
    I'm trying to figure out why when I paste the Pages text above the defaut Dropbox message the spacing between paragraphs is fine, but when I paste it below the default text generated by the Dropbox iOS app when e-mailing a link to a file, the spaces between paragraphs is doubled.
    It seem to be some phantom formatting in my Page document beause I tested by pasting a long e-mail below the Dropbox text and it's still single spaced. For some reason my Pages text goes from single spaced to double spaced when I paste it below that default message that Dropbox iOS generates when you attempt to e-mail a file link.

    Thanks, but this feature doesn't seem to work in iOS.
    The Pages document was created in Pages for OSX, but stored in iCloud. I usually e-mail links using the Dropbox iOS app and copy text from Pages iOS and want to paste into the e-mail created by Dropbox iOS. When I paste the text below the Dropbox link, the paragraphs are double spaced.

  • Automatically stop video when going to next page

    Hi,
    I have an article with a video with sound on the first page that plays automatically. When I swipe to the next page, I hear the video still playing. Is there a way to turn it off automatically as soon as I swipe to the next page?
    Thanks!
    Nick

    Not without auto startanother (silent) video on second page
    (that's a clue for a workaround
    (mobil gesendet)
    Am 02.09.2011 11:03 schrieb "nbervoet" <[email protected]>:
    >
    Hi,
    >
    I have an article with a video with sound on the first page that plays
    automatically. When I swipe to the next page, I hear the video still
    playing. Is there a way to turn it off automatically as soon as I swipe to
    the next page?
    >
    >
    Thanks!
    >
    Nick
    >

  • WRT54GS v5.1 auto reboot when wireless device connects

    Hi,
    I'm using the linksys WRT54GS wireless router v5.1
    Current Firmware version v1.50.9, Sep. 14, 2006
    The problem that I have is that everytime a new device connects to the Router wirelessly, the router reboots itself.
    After the reboot, everything seems to be working fine. This becomes quite annoying when it comes to gaming and another family member turns on their laptop and then I get disconnected by the router because they are connecting.
    What I have done upto now is reset the router after doing the FirmWare Version update and the problem still occurs. (The problem was still there even before I had done a FirmWare Update.)
    Is there a way to solve this problem? because I have read about a few other problems just like mine on the forums and they don't seem to have been resolved.
    Or will I have to go back to PCWORLD to see if I can get a refund / replacement?
    Message Edited by chopsticks on 11-11-200611:05 AM
    Message Edited by chopsticks on 11-11-200611:05 AM
    Message Edited by chopsticks on 11-11-200611:08 AM

    I do not see a "keep alive" option. I use the Automatic Configuration - DHCP because I have connected, a CABLE MODEM provided by my cable provider Telewest Blueyonder
    The router just reboots when the wireless laptops connect. The wired desktop (this PC) loses connection as it is rebooting and regains connection after the reboot. Then both PC and Laptop work fine.
    Message Edited by chopsticks on 11-12-200612:03 PM

  • "Error has occurred in the script" when returning "Home" from external URL

    Hello:
    I've started incorporating video tutorials by our Subject Matter Experts into my Online Help, produced in RoboHelp HTML.
    The first day I tried it, of course it worked, no problem.
    The second day I tried it, it started doing this:
    Pressing either Yes or No on the dialog must be done several times before the dialog goes away, and returns one to the home page in my HTML help. This page is within our website and works fine in any other browser under conventional circumstances. Any ideas?
    Thanks!

    Hey Lew
    One thought here. What if you inserted an inline frame? Are you using RoboHelp 9? If so, click Insert > HTML > IFrame. Configure the Inline Frame with the URL of the topic.
    If you don't have RoboHelp 9, type XXX where you want the frame to be. Then select the XXX and flip over to HTML view. Change the <p> and </P> so they instead read <iframe> and </iframe>. Then return to WYSIWYG view. From there, size the frame as desired and you may then double-click it to see a dialog to change other attributes.
    Might be worth trying if you really want the thing to appear as a topic in the Topic pane.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Occasional reboot when waking MacBook from sleep.  iTunes related?

    Recently, sometimes when I'm waking my MacBook from sleeping, instead of waking, it reboots. I'd say, one out of twenty times.
    It started around the same time I started subscribing to PodCasts. (I'm not using an iPod with them, just downloading them to the MacBook and listening to them through iTunes.)
    My iTunes version is 7.0.2.
    Any clue as to why this may be happening? Or, more importantly, how to resolve this issue?
    MacBook Mac OS X (10.4.8)

    Hi, sugapablo.
    I wouldn't think your PodCast subscriptions are the cause. However, you could cancel your subscriptions for a few weeks and see if that sorts it out.
    Here are some troubleshooting ideas that I think may be more relevant:
    1. Have you applied the "MacBook SMC Firmware Update 1.1."? That update fixed a problem with <<a href="http://docs.info.apple.com/article.html?artnum=304308">spontaneous shutdowns — at a guess, your problem may be related.
    2. You may want to try some of the troubleshooting steps cited in the following documents:• "http://docs.info.apple.com/article.html?artnum=303234."
    • "Mac OS X: Why your Mac might not sleep or stay in sleep mode."
    3. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
    4. You cited that it reboots. However, if you are seeing the following message
    that indicates a kernel panic.
    If so, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
    5. You may want to search the "MacBook Discussion" for similar reports.
    6. Since I suspect your MacBook is still under warranty, you may want to contact AppleCare
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Deleting/ changing auto-completion when typing a web page

    When I start to type a web page in the address bar (just www... etc.), a list of old bookmarks comes up, which I don't want. Is there a way to delete or reset these (e.g. a Library file that can be deleted), or a setting somewhere in Preferences that I can change?
    Safari 4.0.3
    Thanks,
    Richard

    Greetings,
    Contrary to the advice from Carolyn, AutoFill has nothing to do with your problem. When you begin to enter a web address, Safari will suggest possible matches based on your bookmarks and your browsing history. The only way to avoid this is to have no bookmarks and no history, but that seems a bit extreme.
    You can also just press the spacebar before you start entering the web address; that will also suppress the autocomplete feature for that entry.

  • 10.6.6 causes reboots when waking up from sleep

    After installing 10.6.6 everything on my machine seems to be just fine except when my systems goes to sleep and when I wake it up it reboots every time.
    It also rebooted 2 different times for no reason at all butI have not been able to make it do that again.

    After installing 10.6.6 everything on my machine seems to be just fine except when my systems goes to sleep and when I wake it up it reboots every time.
    It also rebooted 2 different times for no reason at all butI have not been able to make it do that again.

  • Auto reboot when wireless turned on?

    Using a Tecra M2-S530, running Windows XP.  Found supposed solutions to this issue on this forum, but they are NOT working.  Need further assistance.  This Tecra goes into a looping reboot whenever I turn-on the wireless funtion.  I've attempted to update the drivers with Toshiba downloads, but they are not working.  Anyone have a solution? 
    Thanks in advance-

    Tecra M2-S530
    Try this.
    Open Device Manager (devmgmt.msc), expand Network adapters, and double-click the Intel wireless device to open its Properties.
    On the Power Management tab, clear the check box for Allow this device to bring the computer out of standby.
    While you're there, do the same for any other network adaptors.
    -Jerry

Maybe you are looking for

  • Batch Processing .doc 2 .pdf with Acrobat 8 Pro and Office 2004 on Tiger

    I have been through the forum posts and for each relavent thread there is the easy batch process that can be done to solve this issue - however, the major flaw I have is (as seen in the attachment) no option to be able to open Word docs. How do I ena

  • Sony iPod Dock Not Compatible with iOS 4

    I play a 3GS through a Sony HD-radio with a dock on the top. Upgrading the 3GS to 4.0 resulted in a popup that says "this accessory is not compatible with iPhone." It was yesterday - now it isn't. Apple: Did you break accessory compatibility on purpo

  • EWA Report show wrong details

    Hi All, As per EWA report we have upgraed our oracle version 11.2.0.2 to the latest oracle SBP and has done all the steps as given in the readme document which is from market place. After that we have generated the EWA report but still for the databa

  • How do I turn off automatic staus changes?

    I recently purchased a Mac and set up iChat, and on the Instant Messaging program I was using on my PC I was able to set it up so that it wouldn't show me as being idle if I hadn't done anything on my computer for a while, or if I was away longer it

  • JavaFX with LibGDX, or Xith3D?

    Just curious if FX is compatible with any of these?  I thought I saw something on FXExperience about Xith3D and a new port for JavaFX8, but I don't think so. I heard you can add a LibGDX object to a Scene though. Not too sure which is better, both se