Auto refresh of data in Cube

Hi,
I created a cube and deployed with data, also viewed. I changed data in oracle table, from which the cube was prepared, but the change in the data did not appear in cube. Is there a property (auto refresh or auto update) associated with cube / App / database in EAS which can be turned on?
Kindly advice.
Thanks and regards,
Veeranna Ronad.
Edited by: Ronad on Feb 17, 2010 10:46 AM

Can we connect to Oracle database using MaxL commands?^^^As Srinivas pointed out, you need to use the MaxL command "import" to load data into Essbase.
See http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_techref/maxl_imp_data.htm for more detail on how to do this. You'll see that it can load from SQL -- you will need to use a data load rule. See http://download.oracle.com/docs/cd/E12825_01/epm.111/eashelp/loading.htm and http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag/ddlintro.htm for more information on data load rules.
Importing a large table data on certain interval makes system and application very slow.^^^Do you have to reload all of the data? Can you just load the differences?
How many records are you loading?
Regards,
Cameron Lackpour

Similar Messages

Report auto-refreshes data in the background

Post Author: tpoland
CA Forum: General
I ran a very large report that does some formula calculations based on a sub-report, in all it takes about 30 minutes to process. After it finished running I minimized Crystal and went on to work on some other things. After about 5 minutes my system started crawling and when I looked at the CPU crw32.exe (Crystal XI) was using between 90 and 99% of the available CPU. When I finally was able to maximize Crystal again I saw that it was refreshing the data in the report. Is there a setting that I can use to prevent Crystal from doing this?
Thanks,

Post Author: bryanflora
CA Forum: General
新增網頁1
Since you talked more about your requirement.
My suggestion is still not to use subreport.
And the better way is try to let the subreport result into a view.
I guess your report should like this:
          PH
          Loc
          Amount
          Rank
          GH
          USA
          D
          CA
          10
          3
          D
          FL
          30
          1
          D
          PA
          20
          2
The "Rank" is what you get from formula, right?
You can prepare a view with a calculated field "rank" and joined the original
table.

Refreshing the Data Source View in Analysis Services

I have added columns to the SQL Database table that is used as a dimension in an Analysis Services Cube. The new columns will be used as additional Property Fields for the dimension. When I attempted to refresh the Data Source view so that the additional columns are present, I am given the following error:
System.Data
Property not accessible because 'Parent Columns and Child Columns don't have type-matching columns'
I have done nothing to the columns used for the parent of child and the error message provides nothing to gon on. Does anyone have any ideas on this?
Gary

Olga,
Thanks for your response. I will try and answer your questions
1) I have not tried removing the columns yet. I will try that this afternoon but have limited hope. The two columns I added are simple text columns that will be used as attributes in the dimension. I have made no change to the parent or child columns.
2) The table I modified is the source table for a parent-child dimension.
3) The reference to the "check list" does not take me to any kind of check list.
4) The parent-child dimensions I am trying to modify have been in use for months and the parent and child columns do have the dame data types.
5) I have also check the data types between the dimension table and the fact table. they use the same data types (small int).
6) I have not made a collection for the parent key, it is a single column. The remainder of your last paragraph is not clear to me. Can you give me an example.
I am fairly inexperienced with Analysis Services, please talk slow and use small words :-)
Thanks again for your help!
Gary

Visio Diagram is not refreshing the data from list

Hi,
I made a pivot diagram in visio 2013 and linked it with SharePoint 2013 list. I configured the Visio services, uploaded it document library. I can view the diagram in browser but it is not automatically refreshing not even by pressing the "Refresh"
button.
Instead i have to open it in visio, refresh the diagram manually and the save it in SP document library to refresh the diagram.
I am using visio web access to view the diagram and also the auto-refresh is enable.

Hi Rizwan,
Following url's might help you.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/79476e70-51cf-412a-aac9-ebb10e82572f/2010-visio-services-data-refresh-issue
http://social.technet.microsoft.com/Forums/en-US/06d53cb3-2593-4dd0-a524-356bd9720231/visio-service-data-refresh-help
Regards Roy Joyson
Please remember to mark your question as "answered"/"Vote helpful" if this solves/helps your problem.
Roy Joyson

PowerPivot report data refresh error Data source as SharePoint list Data Feed

Hi All,
I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
to report started a manual refresh it was success, after next schedules it failed.
Error massage:
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used:
The network path was not found. ;The network path was not found. The network path was not found. .
A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d',
Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.
Thank you very much !
erkindunya

If you are using Claims Auth then this is a known limitation. Auto refresh only works under Classic Auth.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog |
LinkedIn | Facebook |
Twitter | Quix Utilities for SharePoint |
Codeplex

Auto Refresh OBI Page for Current Day Only

Hello Guru's
I have a obiee page which needs to get refreshed every 30 seconds . I could able to do that using <META HTTP-EQUIV = "REFRESH" CONTENT = "30"> . But the triggy part is , auto refresh needs to be applied only for current day and not for any date range selected by user .
Details :
Prompts are defaulted to current date and time on the page, but user can also select date ranges as well . So the setting for auto refresh needs to apply only on current date (default prompt values) and not if the the user select data range .
let me know if any of you guys have come across such .

Check the below link and tweak it if needed.
http://www.cool-bi.com/Customize/AutoRefresh.php
Appreciate if you mark as correct :)
Let me know for issues
Edited by: Srini VEERAVALLI on Jan 4, 2013 10:46 AM

Using Excel 2007 to display and auto-refresh planning.

Hi all,
a customer wants to display a simple planning screen on a 24" monitor.
We're using an old domain pc, with domain user (planning) logged on to display the planning file.
We've configured the worksheet so that multiple users can edit it.
I've also found the settings which auto-update the file. I was amazed that this is standard functionality.
Although, it doesn't work as we expected. It goes well, but when too much users work in the file, some users still get the error message: 'can't open file because it's already in use'.
This does NOT happen when the file is not constantly opened by the 'planning user'.
So that's one issue, probably caused by the 'planning user', having the file opened 24/7.
Another issue is that the file stops auto-refreshing after a while. I didn't find any pattern in that.
So basically, what the customer needs is:
Display Excel worksheet
Auto-refresh
I've found some nice articles about SharePoint and Excel services, but unfortunately they're running SharePoint 2010 Foundation, which does not include Excel services...
Is there any other way or tool to achieve this, without using the Excel-built-in options?
Or maybe there's a fix for that problem?
Thanks in advance.

Hi LunAds,
I'm afraid you have just discovered how bad these features are implemented in Excel: they just don't work properly and I always advise against using them for any serious long-term solution.
If you do not have Excel services, then editing the document on the server (which would prevent lots of problems) is out of the question indeed.
Alternatives depend a lot on your needs.
For example, you could use sharepoint lists that the users can edit and then import those lists into Excel for reporting purposes.
But if this is relational data (parent-child tables, which is very often the case) then a database solution is probably the best route to take.
Regards, Jan Karel Pieterse|Excel MVP|http://www.jkp-ads.com

UDF at header level will not auto refresh before & after adding the invoice.

Hi All,
I have a FMS query in the UDF at AR Invoice header level. I have set the FMS query to auto refresh when tax rate field changes but the UDF doesn't auto refresh when there is a tax code in the document.
I will need to add the invoice first then open the added invoice and press shift+F2 to get the calculated amount in the UDF to update the invoice.
How to get the UDF to auto refresh whenever the tax code has changed? Or after the invoice has added?
The FMS query:
SELECT sum(T0.[TotalSumSy]) FROM INV1 T0 inner join OINV t1 on t1.docentry = t0.docentry WHERE T0.VatGroup in ('SR','DS','AJS') and t1.docentry = $[OINV.docentry]
Thanks & BR,
Leng

Hi,
I solved the problem following the steps in SAP note 633285 - Printing the total Vat amounts in each Vat group, https://websmp130.sap-ag.de/sap/support/notes/0000633285
In order to print in the order the Vat amount in each vat group Please perform the followed stages:
Go to Tools (in the SBO tool bar ) and chose Manage User Field
In Marketing Documents (Rows) add new fields according to the Num of the vat groups that you are using in Orders (e.g. A1, A2 ,A4) The type : Units and Totals - the Structure: sum in the order each column will represent the vat amounts in the line but only for certain Vat Group
in order that each column will display the vat amount in the line only if it belong to certain Vat group we attach a query to each column: (e.g. we have 3 columns : A1, A2, A4) .the queries are;
SELECT $[$38.82.NUMBER] WHERE $[$38.18.0] = 'A1' FOR BROWSE SELECT $[$38.82.NUMBER] WHERE $[$38.18.0] = 'A2' FOR BROWSE SELECT $[$38.82.NUMBER] WHERE $[$38.18.0] = 'A4' FOR BROWSE Now each column will display the vat amount only if it in the relevant vat group
in the order document printing template you need to add those Vat column in our example we add 3 data fields : the file: Order - Rows , the Field: A1/A2/A4 - you can hide (un visible ) this columns as needed
in the Repetitive Area Footer add a calculation field for each vat groupthe Type: Column Total , the Column: Order; A1/A2/A4 in each calculate field you will get the sum amount of the vat in the relevant Vat group. (in addition you can add text fields with a relevant description for the calculation fields)
Thanks & BR,
Leng

Auto refresh flash chart not working (APEX 3.1)

Hi All
I followed the instructions on how to update auto refresh flash charts on the following page:
http://www.inside-oracle-apex.com/2007/04/auto-refresh-flash-charts-in-apex-30.html
Is there anything else that needs to be done? I dont get a 'last refreshed' date, nor does the chart refresh itself.

user447071,
I would check:
1) Can you access the flash files directly? Look at the page's HTML to find reference to an SWF file, then try to access that from the URL.
2) Is the XML coming back properly? Run the page in debug mode, then click the "Show XML" link after the Flash chart.
- Marco

Production Order - Trigger won't Auto Refresh

2007A PL49 - Just upgraded from 2005A
I have the following query set in a UDF on the Production Order.
SELECT T1.PriceAfVAT
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
WHERE T1.ItemCode = $[$-6.0.0] and T0.DocNum = $[$-32.0.0]
The query wasn't working after the upgrade from 2005. I had to change the query to include the negatives "-" in the WHERE clause. Once I did this the query was working fine. However, now that the query is working it doesn't refresh automatically.
My settings are as follows:
Auto Refresh When Field Changes is selected
The field is Production Order Origin Number
Display Saved User-Defined Values is selected
If I place my cursor in the UDF and hit Shift+F2 the query is executed and pulls in the correct data.
How do I get the Auto Refresh functionality to work properly?
Note: other triggers are working correctly after the upgrade.

The problem is probably you selected Auto Refresh Field Changes as the same field in the Where clause. If you could find any other fields to select, it should work.
Thanks,
Gordon

Tree Component with incremental auto-refresh?

Is there a free (preferably) or commercial JSF tree component with a general AJAX-based incremental auto-refresh?
Essentially when dealing with a tree of data which can lose or add nodes at any time, it would be nice to have an optional polling mechanism built into the tree that would check the server for tree insertion and removal events and handle any such events whenever they're found via incremental AJAX-based modifications to the tree -- not a full refresh. The same is true for tree node change events.
To be clear this is not a substitute for handling client events -- the tree data is indicative of shared state and changes independently from user actions.

I was following instructions from [http://niallcblogs.blogspot.nl/2009/06/auto-refreshing-adf-chart-objects-in.html]
But I got it to work the way you say.
But setting refresh="always" generates exceptions in even simple cases. Is it because I am using MySQL which does not have event notification support?

BO dashboard auto-refresh

Post Author: happymouse
CA Forum: Performance Management and Dashboards
Dear all,
I have a dashboard with multiple analytics within it. Currently, for refreshing of the dashboard, we need to click on the submenu name.
Kindly advise if there is any way to auto-refresh the dashboard (without clicking on submenu) say, every 5-mins interval. Hopefully we can leave the dashboard open without clicking on the submenu for refresh while data feed is coming in continuously.
Thanks.
HappyMouse

Post Author: jezbraker
CA Forum: Performance Management and Dashboards
No specific refresh option within the out the box system - but its prertty simple to create a html based component you can hide in the dashboard page that runs a little script that calls a parent frame refresh that would do the job - used this type of solution a few times now. Rather depends on what version of DM youre using for specific examples.

Konqueror file management and auto-refresh

Hello all,
I am working with Arch and KDEmod and so far everything is pretty good. I do have one problem that is a bit annoying.
Konqueror file manager windows do not automatically refresh when viewing the URLs system:/home or system:/users/jay. The system:/home URL is what is opened when you click on the "Home" icon, so this makes this problem stand out.
Anyway, the problem can be reduced by doing the following:
1. Open Konqueror file browser and select "Home Folder" from the tree on left. This puts you at the URL system:/home. (Alternately, just click on the "Home" icon that gets set up in the kicker by KDEmod.)
2. In a terminal window create a file in your home directory. Note that the file does not show up in the Konqueror window.
3. Press F5 to refresh Konqueror. The newly created file now appears.
4. In a terminal window delete the file you just created. Again, note that the file does not disappear from the Konqueror window.
5. Press F5 to refresh Konqueror. The file now disappears.
The correct behavior is that when you create and delete the file, it shows and then disappears from the Konqueror window accordingly. Currently this does not work for the system:/home (Home Folder) or system:/users/jay (Users Folders/<user full name>) URLs. Interestingly enough, if I type the URL "/home/jay" into the Konqueror location bar in file management mode and then do the above steps, the auto-refresh works fine.
Does anyone have any clues as to why the refresh doesn't work for the system:/ URLs? Is this by design? What plugin actually provides the system:/ URL schema?
Thanks for any suggestions,
Jay

Hi LunAds,
I'm afraid you have just discovered how bad these features are implemented in Excel: they just don't work properly and I always advise against using them for any serious long-term solution.
If you do not have Excel services, then editing the document on the server (which would prevent lots of problems) is out of the question indeed.
Alternatives depend a lot on your needs.
For example, you could use sharepoint lists that the users can edit and then import those lists into Excel for reporting purposes.
But if this is relational data (parent-child tables, which is very often the case) then a database solution is probably the best route to take.
Regards, Jan Karel Pieterse|Excel MVP|http://www.jkp-ads.com

VO Auto Refresh error - Unsupported query for Continuous Query Notification

I created a read only view object and set the auto refresh property to true. According to the documentation that was all that need to be done in order to enable auto-refresh for a view instance of a shared application module (which I am using to retrieve reference data). When I run a test, I get the following error:
[371] DCBindingContainer.reportException :oracle.jbo.SQLStmtException
[372] oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT
CCIPO_REF_SENSITIVITY_LEVEL.SENSITIVITY_ID SENSITIVITY_ID,
CCIPO_REF_SENSITIVITY_LEVEL.SENSITIVITY_DESC SENSITIVITY_DESC
FROM
CCIPO_REF_SENSITIVITY_LEVEL
     at oracle.jbo.server.BaseSQLBuilderImpl.processException(BaseSQLBuilderImpl.java:3721)
     at oracle.jbo.server.OracleSQLBuilderImpl.processException(OracleSQLBuilderImpl.java:4722)
     at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1386)
     at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:928)
     at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:6968)
     at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1183)
     at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1037)
     at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2774)
     at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2751)
     at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1580)
     at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3500)
     at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:9943)
     at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:779)
     at oracle.adf.model.binding.DCIteratorBinding.refreshControl(DCIteratorBinding.java:679)
     at oracle.jbo.uicli.binding.JUIteratorBinding.refreshControl(JUIteratorBinding.java:474)
     at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4437)
     at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:347)
     at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1605)
     at oracle.jbo.jbotester.panel.BindingPanel.setBindingContext(BindingPanel.java:116)
     at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:88)
     at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:71)
     at oracle.jbo.jbotester.form.BindingForm.createMasterPanel(BindingForm.java:63)
     at oracle.jbo.jbotester.form.BindingForm.init(BindingForm.java:98)
     at oracle.jbo.jbotester.form.JTForm.<init>(JTForm.java:72)
     at oracle.jbo.jbotester.form.BindingForm.<init>(BindingForm.java:50)
     at oracle.jbo.jbotester.form.FormType$1.createForm(FormType.java:63)
     at oracle.jbo.jbotester.form.FormType.createForm(FormType.java:199)
     at oracle.jbo.jbotester.form.FormType.createTab(FormType.java:270)
     at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:248)
     at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:207)
     at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:203)
     at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:140)
     at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:123)
     at oracle.jbo.jbotester.tree.Tree.processTreeMouseClicked(Tree.java:728)
     at oracle.jbo.jbotester.tree.Tree.access$100(Tree.java:96)
     at oracle.jbo.jbotester.tree.Tree$TreeMouseListener.mouseClicked(Tree.java:141)
     at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
     at java.awt.Component.processMouseEvent(Component.java:6292)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:617)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: ORA-29983: Unsupported query for Continuous Query Notification
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:924)
     at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1261)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1419)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3806)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1667)
     at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1262)
     ... 65 more
The query is selecting two varchar2 columns and according to the criteria in the documentation is valid to be registered for QRCN in Guaranteed Mode. Any thoughts?
JDev version: JDeveloper 11.1.1.5.0.

Well, could be a DB bug. I seem to remember that there was a bug in that area in an older version of 11g.
Or you could use jnettrace to trace the calls made by the driver to the DB. That should show you what's going wrong.
Sascha

Is there anyway to stop the auto-refresh when using HsGetValue?

Hi there
I am just wondering if there is a way to stop the automatic refresh when opening a workbook that has HsGetValue functions? The issue I am having is that when you create a report in Smart View using the HsGetValue function, save it down, disconnect from Smart View then open it up again, it automatically tries to refresh the data. If you do not type your login, it just changes to #NEED REFRESH and you cant see the data anymore. This only happens when you have Smart View installed, if you are on a vanilla computer you can see the numbers no problems.
The reason we dont want it to refresh is that we want to be able to view data at a point in time, instead of always refreshing to the latest data.
I know that I can stop the refresh by changing Excel to Manual Calculation, instead of auto-calculation on formulas, but this isnt a viable solution as users arent used to manually pressing the Calculate button in Excel for their non Hyperion work.
We are using 11.1.1.3 Planning and Essbase.
Thanks!

See this post Smart view first refresh
Aside from turning auto-calculation off, you would need to copy the cells and paste them as values to get a static worksheet. This will eliminate any future refreshes.

Auto refresh of data in Cube

Similar Messages

Maybe you are looking for