Auto-release Planned Orders is not creating WIP job after zero on-hand (i.e. Level Below safety stock)

Hi
The time release fence in defined at item level as 1 day also safety stock level is defined in inventory safety stock form.
Once MRP launch it should create the discrete job against item as zero onhand for that item but MRP workbench is showing planned order for the item instead of creating item.

Similar Messages

Planned order is not creating for a phantom assembly

Dear experts
My fert having two semi finished components
first semifinished is assigned with a raw material
And second semifinished is assigned with two different raw material
in material master of second semifinished mrp2 view Special procurement=50
and after running mrp, second semifinished is not getting any planned order or dep requirement all the raw material under this getting planned order
But in my understanding of phantom second semifinished in should not get any planned order?
Am i correct?
Pls advise me where i need to check
Abu Fathiam

Hi,
Phantom assembly will generate planned order for its component when you will maintain:
Procurement type: E
Special procurement type: 50
Also in SPRO: OPPQ BOM explosion
Also check in BOM In basic data tab
In MRP Data screen, check explosion type- are you maintained phantom assembly off? Check it if you want planned order.
If you don't want system generated planned order for your phantom assembly component you should not maintain this indicator.
Regards,
Alok Tiwari
Edited by: Alok Kumar Tiwari on Feb 29, 2012 11:38 AM
Edited by: Alok Kumar Tiwari on Feb 29, 2012 11:39 AM

Restrict Product Allocation if Planned order is not getting created

Hello All,
We have a scenario that when ever a Sales Order is getting created, Product allocation assignment will be done automatically and planned orders will be created for that requirement in APO.
There are some cases where in because of wrong Variant Configuration, Planned orders wont be created. Our requirement is to delete the Product Allocation automatically or to stop the product allocation assignment if the planned orders are not created.
Do we have any standard setting for doing so or Kindly suggest me some BADI's which can be used for it.
Thanks in advance.
Best Regards,
Srinivas.D

Srinivas,
A rather odd requirement.
Have you tried in SCM APO 'Maintain check instructions' to perform the product check first, then allocation? I would think that if the product check failed, then allocation would not be consulted, and no allocation therefore assigned.
IMG > APO > GATP > General Settings > Maintain check instructions
Best Regards,
DB49

Planned Order Does not exist

my Stocks and requirements list shows an MRP element of DEPreq for a element data (halb part number). Double clicking on the element I see the pegged requirement part number and planned order. However. SAP says the planned order does not exist nor does the pegged requirement. I can trace upwards in stocks requirement to another part number. the Data element says DIRECT PRODUCTION. but again there is no requirement for that part nor can i get to the planned order for it either, SAP says it does not exist.
These are related part numbers which I suspect may have come from a common Bill of material; but there is no demand for the high level material but yet I have low level componenets in my Stock and requiremnts.
Is this a table inconsistency issue?
thanks in advance

Hi Borries,
Please go thru link below. This also could help enhance your knowledge in planned order.
http://help.sap.com/saphelp_nw04/helpdata/en/c1/376535449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5b/ae39704b8611d182ba0000e829fbfe/frameset.htm
rgds,
nanthakumar

Whether it is possible to make auto goods issue below safety stock level

Hi SAP Gurus,
I am implementing MRP for generating stock transfer Planned orders from a Main Mother Plant to different Plants. We have defined a Safety stock level for materials at main Plant level.
There is a auto program available for generating auto goods issue against Purchase orders.
System picks up Qty as long as unrestricted stock exists for the material during auto goods issue.
System dont pick up any Qty below safety stock level (manual goods issue works below safety stock level).
We are defining safety stock to meet sudden requirements and have time for new procurement.
But it should allow us to do auto goods issue below safety stock level.
Whether this is possible and what need to be done ?
Thanks and Regards,
R.Velmurugan.

Hi Velmurugan,
I don't think auto GR is a problem from safety stock. Auto Gr can be done by two ways.
1. Control key and assigning the control key in operation(Preferably in last operation)
2. In production scheduling profile you can do it. You have to assign the production scheduling profile in material master work scheduling view.
Regards,
Krishnendu.

Is there a link between ASCP released planned order and purchase requisition?

Hi,
i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
thanks

Hi,
As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
Hope that helps.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Default subinventory for released planned orders

Is there a place where we can assign a default receiving subinventory for the released or auto-released MRP Planned orders?
We need the PO created from these released planned orders to have a specific receiving subinventory. It may be defined by item or better by user or responsibility.
Thanks a lot.
Luis

Hi Luis,
Please check the Setup Item Transaction Defaults in Inventory (Navigation:Inventory>Setup>Transactions>Item Transaction Defaults).
Its functionality is Sub inventory and Locator defaults are specific to "ITEMS".
Use this form to define a default sub inventory and/or locator for any item for shipping, receiving, and move order transactions. Oracle Shipping Execution displays the default shipping information when you ship an item. Oracle Inventory displays the default receiving information when you receive an item. For move orders, Oracle Inventory derives the default put away locator when you transact an item into a locator controlled sub inventory if no locator was specified by the creator of the move order.
Regards
Jagadish

Unable to release planned order for single line from MRP workbench

Hi
We are unable to release planned order for single line from MRP Planner workbench,but Select All For Release is working for all the lines for the item
User want to release a specific line but no new requisition is generated
It is highly appreciable if anyone could help to resolve this issue
Appreciate the Help
Regards
VKPK

It sounds like the release goes through in the workbench but the requisition does not show up in source - is this correct? If so I would check item attributes / flags for purchasing and buy. also have found some items require a purchase price to be populated in master and org

Can I releases planned orders in planner workbench using inventory planner responsability (IO)

Can I releases planned orders in planner workbench using inventory planner responsability (IO), in IO manual I found following information :
Planner Workbench
You can use the Planner Workbench in Oracle Advanced Supply Chain Planning to act on recommendations generated by the planning process for a plan. You can implement
planned orders as discrete jobs or purchase requisitions, maintain planned orders, reschedule scheduled receipts, and implement repetitive schedules. You can choose all
suggestions from an MRP plan, or only those that meet a certain criteria. In Oracle Inventory Optimization, Planner Workbench is used to perform tasks such as setting up
item attributes, setting up supply chain BOM, and analyzing time-phased safety stocks.
my question is Oracle Inventory Optimization, Planner Workbench can´t release planned orders.
Thanks in advance
regards James

Hi James,
We cannot release planned orders from IO workbench.
IO is for safety stock planning, not for releasing planned orders. That is done from an ASCP plan which uses the IO plan as demand schedule.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Donot want Planned Order to be created for STO in supplying Plant

Hi Gurus,
We have material A which in being produced in Plant 1000. This Material A is being used as a Component for a product in plant 2000. By Using Stock Transport order we get the material from supplying plant 1000.
when we run MRP for the plant 2000, schedule line is generated for the plant 2000. at the same time planned order is generated for the Material A in plant 1000.
My requirement is i dont want planned order to be created in supplying plant i.e plant 1000.
Afzal

Hi,
Let me Clarify my requirement again.
Material A is being Produced in plant 1000(supply). The same Material A is being used as Input material in plant 2000(Demand) for product B.
Master Maintained.
Material Master
I maintained Procurement type as F and Special Procurement as 40 in Plant 2000 for Material A.
I maintained Procurement type as E for Material A in Plant 1000.
Schedule Agreement
Schedule Agreement created in Plant 2000 referring plant 1000 as supplying plant and agreement type as LU.
Source List
Source List Created based on the schedule agreement and maintained MRP indicator as 2.
MRP Run
During MRP run for Product B in plant 2000, It creates schedule line for the Material A in plant 2000. At the same time it creates planned Order for material A in the supplying plant 1000.
My Requirement is we don't want the planned order in supplying plant 1000. The reason behind is that we want to run MRP in plant 1000 seperately at a different frequency.
Running MRP in plant 2000 should limit the requirements raising in plant 2000 only and the MRP run for 1000 should limit to plant 1000 only.
Message was edited by:
afzal ahmed

Planned Orders Are Being Created In The Future Period (About Six Months onw

Dear All,
We are facing a problem that when we execute the product heuristics for a particular location - item, planned orders are not getting generated as per the demand element in the current period but they are getting generated in future period say six months from now... We could NOT understand that Why the system is pushing the orders in future period. We have checked the following parameters :
Calendar is active for the period upto DEC"2012.
Time Streams have been genereted for the particular resource.
Resource(s) do exist in Live Cache.
Sufficient capapcity is available in the current period (as viewed from the resource planning table).
Please advise that what other parameters should be checked in order to get the planned orders in current period. In this regard, we shall like to confirm that we are facing this issue since last 8 - 10 days, earlier, there was NOT such an issue.
With Best Regards,
Sanjeev Chugh
06-JAN-2012

Hi Sanjeev,
Did you maintain any value for planning time fence, and if yes, how big is it? This could be one possible reason why system is not able to plan the orders (also depends on what Heuristics you are using).
In RRP3, double click on your planned orders and check out the start date and the end date. Is your start date also lying in the future, or is it that due to long time in your operations (somehow your PDS/PPMs got messed up?), orders availability got pushed to the future.
I am not an expert in PPDS, but I can only think of different lead times coming into picture which could possibly push your planned orders availability to the future.
See if this helps.
Thanks - Pawan

Not create COPA document after Billing

Hi Experts:
my company product strategy is MTO (make to order).It's not created COPA document after billing .I don't know when the COPA should be created. After Billing or after running VA88 .so I tried to run VA88. I got a COPA document after running VA88 . but It didn't have revenue. Maybe I missed some config . Would you like to give me some advices ? thank you very much .
the steps I did :
MM02 - Strategy group is 20
VA01 - Create a sales order
CO08- Create production order with sales order
MIGO - Goods Issue
CO11N - Confim
MIGO - Goods receive
VF01 - Create billing
KSS2 - Actual cost splitting
KSII - Execute actual price calculation
KKAo- Calculate work in process
KO88 - actual settlement (production order)
KKA3 - results Analysis for sales order
VA88 - actual settlement (sales order)
KE24- COPA Report (but not contains revenue )

Hi Siva:
I checked my configs ,it's right . I think if my strategy is MTS (make to stock ). maybe the reason is that .But now my strategy is MTO(make to order).maybe I miss other configs.

Information about Planned Order convert into Purchase Requisition Job work

Hi Expert ,
Can U tell me If we generate the MRP of FG in which one component Procurement type is 'BOTH'
then can we convert that planned order partially into Purchase Req - Job work and Purchase Req - Normal
SANDEEP

Hi Sandeep,
From SAP 4.6C version onwards SAP support partial conversion of a Planned Order into Purchase reqt / production Order and the balance will be available with the same Planned Order number itself.
Later you have the option of converting teh balance planned order qty to either Production order / Pur reqt.
So I can say if your current SAP version is more than or equal to 4.6C then you can convert the partial planned order to Pur reqt now and later the balancce qty to either Pur Reqt itself OR Production Order.
Hope this will help.
regards
radhak mk

Cancelling WIP Job after completing the job

Hello Everybody,
There is an issue as to 'Cancelling WIP Job after completing the job'
Please let me know how to resolve this or the workarounds.
Provide me the navigation please.
Thanks

Hi abdul;
Please check this and also Note:WIP Purge FAQ [ID 605621.1]
Hope it helps
Regard
Helios

Auto-release Planned Orders is not creating WIP job after zero on-hand (i.e. Level Below safety stock)

Similar Messages

Maybe you are looking for