Auto removal of previous A/V

Hi, I'm on System Center 2012 and I'm testing Endpoint Protection. 
I like the fact that SCEP is able to remove a previously installed A/V application but we still use the McAfee agent for encryption. The McAfee agent has many other purposes than a simple A/V so I'd like to exclude it from the auto-removal feature. I want
to keep this feature enabled because I still want it to remove Trend OfficeScan. 
Is it possible to keep this feature but exclude a specific component from it?
Thanks,

Thanks for the answer. It's disappointing though as, like I said, the McAfee agent is not an Anti-Malware product. It only places itself in between the McAfee ePolicy Orchestrator server and the McAfee product which the anti-virus is a part of but it is
not mandatory so you can have many other McAfee product there not acting as an anti-malware. 
But I understand it is not possible this way so I'll go with the deployment route. 
Regards,
The policy for removing Anti-Malware will only remove some of real-time Anti-Malwares which are as follow:
Symantec AntiVirus Corporate Edition version 10
Symantec Endpoint Protection version 11
Symantec Endpoint Protection Small Business Edition version 12
McAfee VirusScan Enterprise version 8
Trend Micro OfficeScan
Microsoft Forefront Codename Stirling Beta 2
Microsoft Forefront Codename Stirling Beta 3
Microsoft Forefront Client Security v1
Microsoft Security Essentials v1
Microsoft Security Essentials 2010
Microsoft Forefront Endpoint Protection 2010
Microsoft Security Center Online v1
Based on
http://technet.microsoft.com/en-us/library/gg682067.aspx#BKMK_EndpointProtectionDeviceSettings
From above list if you enable this policy it should remove McAfee VirusScan Enterprise version 8 and it won't remove other McAfee products. I suggest do a simple test by enabling the policy to automatically remove and test it in few PCs and if it did
not removed your product, you could use the default policy , otherwise use the policy to manually remove your Anti-Malware using System Center.

Similar Messages

  • How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

    How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

    settings - appstore - view id - log out and log in with your id.

  • How can i remove the previous icloud acount from my iphone4?

    I recently purchased a second hand iphone4 not jailbroken and i already restored it to factory settings but i can't log in to icloud using my account because it states that  "The maximum number of free accounts have been activated on this iPhone". How can i remove the previous icloud acount from my iphone4? Hope someone could help me on this. Cheers! :)

    Hi,
    My dad gave me his old iphone as he got an upgrade. I can't seem to change his icloud account to mine. I'm getting his updated calender and his mail - and there seems to be some confusion between both our accounts. He seems to be acquiring some of my contacts - some of which have names which have led to some probing questions... So basically this needs to be sorted out! How can i delete his account from the iphone but not his whole icloud account? he would not be happy if i did this...
    Sophie

  • I Beta tested 4.0 RC1 and now can not upgrade to 4.0. Error message is need to reboot to complete prior instalation. Have removed all previous versions of Firefox, rebooted and still same error message.

    I Beta tested up to and including 4.0 RC1 without major problems. However I can not now upgrade to 4.0. Same error message time and again, "need to reboot to complete prior upgrade instalation". I rebooted several times, then tried first removing all previous versions of Firefox using both MS Add/Remove and then iolo System Mechanic, then again downloading 4.0. Even after rebooting same error message. I can not therefore install/use Firefox.

    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0: http://www.mozilla.com/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Auto remove of log files on the client-side is not working

    Hi,
    I have a setup for one-to-one client/server replication database. Everything is replicated ok.
    But on the client side, I see the log.00000000xx files are not removing at all,
    while the server has only 2 last log.00000000xx files left. But if I switch the role of the client/server,
    the newly server will eventually removed the unused log.00000000xx file, and have two last log file left.
    Both client and server database environment setup has called dbenvp->log_set_config(dbenvp, DB_LOG_AUTO_REMOVE, 1).
    Is there any additional setting for the client-side to auto remove the unused log files?
    Thanks,
    Sandra

    Hi.
    First, what version are you running? We created a test to confirm that this feature is
    working as expected on both a master and a client site. What flags do you have set
    for replication? I think we need to have you run with replication verbose messages
    set on the client site and possibly other diagnostics in order to determine what is different
    about your setup. We should take that level offline. Verbose messages can generate
    a large amount of output.
    You can contact me at the typical [email protected] and we'll move it
    forward that way. Thanks.
    Sue LoVerso
    Oracle

  • Junk mail filter in yosemite doesn't work. i can't find the 'mark as junk' selection or 'remove from previous recipients' which would help to filter out spam.

    junk mail filter in yosemite doesn't work. from the flags, i can't find the 'mark as junk' selection. Formerly clicking on the email address in question would allow one to 'remove from previous recipients' which would help to filter out spam. I've adjusted all the settings under mail preferences, but that is not helping.

    Hello Diane162,
    Welcome to the Apple Support Communities!
    I understand that you would like to be able to filter some of the junk mail that you are receiving in Mail. The attached article has a lot of great information on junk mail filtering, including how to mark as junk and adjust the junk filter.
    Mail (Yosemite): Reduce junk mail in your inbox
    Cheers,
    Joe

  • HT1296 How can i remove at previous computer resgister from my Iphone?

    How can I remove a previous computer register that was on Itunes from my phone?

    Sorry - what? Can you provide a little more info about what you are wanting to do?
    Cheers,
    GB

  • Am unable to view recent History older than 1 day since removing "All Previous History"

    I am unable to view any previous history older than the most recent 10 items, since removing "All Previous History". Before removing "All previous History" I was able to view history from, Yesterday, Last Week, last Month etc, but all I can get now is the last 10 items of history.

    See http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

  • I need to remove my previous question? How I do it?

    I need to remove my previous question? How I do it?also how I edit my previous discussion?

    You can't remove your previous question & if 15 minutes have past since posting, you can no longer edit your post.

  • I recently downloade Firefox v6.0 but had to remove it via the Control Panel Add/Remove Program. When I tried to re-install it I keep getting an error messsage that said that I had to reboot to fully remove the previous copy of v6.0.

    I recently downloade Firefox v6.0 but had to remove it via the Control Panel>Add/Remove Program. When I downloaded v6.0 again and tried to re-install it I keep getting an error messsage that said that I had to reboot to fully remove the previous copyof v6.0. However when I did reboot I get the same error message. I'm sort of stuck in a loop and can't figure out how I can re-install v6.0. I am running Windows XP on a Dell Inspiron 9300 laptop.

    Please do the following.
    Click '''Help '''| '''Check For Updates'''. The option to update should appear and version 3.6.17 should download and install.
    However, sometimes things go pear-shaped and you get version 3.5.19. If that happens, repeat the same steps to update to 3.6.17.
    Once you have 3.6.17 installed, you'll get the opportunity to update to the current version which is 4.0.1 ''Please don't do that for the moment because you first of all have to update your plugins''. To do the latter, please do the following.
    Go to http://www.java.com/en/ and install the latest version of Java.
    Update Adobe Shockwave for Director via http://get.adobe.com/shockwave/
    Update Adobe Flash via http://get.adobe.com/flashplayer/
    Update Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO
    For security details regarding the Adobe updates, see: http://www.adobe.com/support/security/advisories/apsa11-02.html
    Once you've updated all those, go to '''Help '''| '''Check For Updates '''again to update to version 4.0.1

  • Data being removed from previous months calendars.

    My
    Data is being removed from previous months calendars

    Go to settings>mail,contacts, and calendars. Make sure the settings for Sync under calendars is set to all events to sync all past events.

  • Can you set the Duration of a Transition to instant? Or Remove a previous?

    Can you set the duration of a Transition to instant? (Rotate and Translate).
    Or if not, remove a previous transition done? (Reset the transitioned object back to its original). Ihave tried setting Duration.millus(.000001), but I can still see it translate/rotate. if I set it to zero, it doesn't do anything at all.
    Goal:
    I have a Connect4 type grid that Flips. It rotates upside down 180degrees, the pieces 'fall' down. Then I ACTUALLY flip the game board (not just effects) using a matrix calculation. But since my grid is upside down, my pieces appear upside down.
    So here is the method I was thinking:
    -Flip the board upside down
    -Translate the pieces down (gravity)
    -Actually flip the game board's internals and positions.
    -Undo the previous rotate/translate so the user thinks the 'animation' actually flipped the board.

    You cannot create an instant Transition. An Animation with a duration of 0ms is considered invalid and does not do anything when play() is called.
    Why do you have to use Transitions to set the values? They just modify Node properties over time, if you want to change the properties instantly, you can just access them directly. TranslateTransition modifies translateX, translateY, and translateZ, RotateTransition modifies rotate and rotationAxis.

  • Regarding removing all previous versions of the Mocrosoft Server Speech Platform Runtime

    While I was trying to install Kinect SDK Ver. 1.8, I was asked to remove all previous versions of the Mocrosoft Server Speech Platform Runtime. 
    Regarding this, I tried to find the program but I couldn't. 
    I am working on Windows Vista. 
    Any comments and solutions would be appreciated. 
    Thanks, 

    Hi Park,
    I agree with Martin, please ask Vista Forum for help so that you can get more professional suggestions. For your convenience:
    https://social.technet.microsoft.com/Forums/windows/en-US/home?category=windowsvistaitpro
    However I would like to share some information for you.
    Based on my research on Kinect SDK Ver. 1.8, the supported OS as below:
    Windows 7, Windows 8, Windows 8.1, Windows Embedded Standard 7
    Maybe this is the root reason that why cannot install Kinect SDK Ver. 1.8 on Vista.
    More details to see:
    http://www.microsoft.com/en-us/download/details.aspx?id=40278
    Thanks
    Mavis Huang
    TechNet Community Support

  • Removing all previous versions of IronPort

    I have been tasked with automating the install of IronPort . It has come to my attention that many different versions of IronPort are already installed (going back to version1.x). Can anyone confirm if the current 7.x installer will recognize those very early versions and uninstall them, or failing that, if there is any kind of removal tool that will?
    Thanks,
    Mike

    Hello Mike,
    the answer can be found in the release notes for the plugin:
    To install the Cisco IronPort Email Security Plug-in, you need to uninstall any previous versions of Cisco IronPort Email security plug-ins that you may have installed. This includes:
    •    Any previous version of the Cisco IronPort Email Security Plug-in •    Any previous version of the Reporting Plug-in (also called the Complaint
    Plug-in)
    •    Any previous version of the Encryption Plug-ins (Desktop Encyrpt or Desktop Flag)
    BTW, last version before the current Cisco Plugin (version 7.x), was 1.8, this big jump in versioning is caused because we combined a number of different appliacation (spam, encryption) into a single plugin. Also it was always nessesary to remove the previous version of a plugin before installing a new one, so this is why you'd only find one installed instance on an user's PC.
    Hope that helps,
    Andreas

  • Removing a previous owners settings

    I am trying to get my internet connection going on a second-owner G4 that came with Tiger and have had no luck. The broadband modem is showing okay, but there is a problem with the previous owners settings still being partially there and greyed out so they cannot be removed. What can I do to delete these settings?
    Thanks

    If the Tiger install disc was included with this G4, I would use the Tiger install disc to reformat the hard drive HFS+ or extended with Journaling enabled and re-install Tiger. This will make this Mac 100% yours removing all previous owner's settings and inherited problems.

Maybe you are looking for