Auto render or render is not saved

I have a project that sequence settings is 240X280. Any time I render and minimize the window, or restart FCP the render files are gone. There is a red line on the top, showing that needs to be rendered in order to preview. IN the same project I have a sequence that is 720X480 and its working fine there.
Is there a solution to this?

Yes, make sure you sequence settings match your clip settings. Your frame size looks a bit unusual, what format are you dealing with?

Similar Messages

  • Auto Render .... is it creating QT's that are eating my drive space?

    Hello - I've been editing a feature and have several projects open at the same time, as well as lots of sequences open too.  I noticed
    today that 40 gigs just evaporated from my hard drive and I'm assuming (now, after research) that it's because of Auto Render. 
    It appears that every minute a new QuickTime was created on my drive, and was labeled, for example:  ROUGHCUT_1-ITM-00002d01.  Has anyone else experienced this?  Isn't this overkill on Apple/FCP's part?  I have deselected Auto Render and so far it seems as though it has stopped creating these files. 
    My question is:  Can I delete all these files without disastrous results?  I am working with an external drive which has all of the media and the project.  The Auto Render has been saving to my MacBook Pro drive - why - I don't know since I have set everything else up to save to my external.  How do you FCP users work with or without Auto Render - do you keep it on and delete the files later, or do you have it off?
    Thanks for any tips!!

    Actually, relooking at your post, I am assumming you are on Final Cut Pro X since that is the forum you are posting to.  If you are not, then none of this will make sense to you.  If you are then  ...
    You have to be out of your project timeline and into the project browser on the lower left part of your screen.  You can get there by clicking on the icon with the reel of tape in it at the lowest left corner.  If it is pointing to the left, click it to get out to where all your projects are in view.  That is the project browser. See the two pictures below ...
    Then simply click to select a project but do not double click to go into it for editing.  Then go to the File menu and select the Delete Project Render Files near the bottom of that menu.  Check the option to delete only unused render files.  Hope this helps.
    stephen

  • Reporting Services Webpart - web part does not auto render consistantly

    We are on SharePoint 2010 (integrated with Reporting Services)- on several sites we have added the Reporting Services Web Part and with a saved parameter.  The behavior of this web part is not consistent.  There are times when I open up a site
    and the web part will auto render the report.  5 minutes later I can go into the same site, and the web part does not auto render the report.  I have to do edit page, or close and re-open the web site.  Has anyone experienced this type of behavior. 
    I've looked for assistance with this issue on-line cannot find anything that specifically addresses this issue.   

    Hi Karen,
    If the parameters have default values in the report, then the report can be rendered automatically.
    For this issue, I recommend to verify the things below:
    Does this issue occur when you open the page with the web part in a new tab in the browser or go back to the previous opened tab?
    Does this issue occur in the server side or client side?
    Please add the site to trusted sites in Internet Explorer to see how it works.
    Please change another browser to see how it works.
    For narrowing down the issue scope, please test with another report and compare the results.
    Thanks,
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • When I render a video Pre Elements 12 or 13 and save it to work on later. When I bring it back up the rendered file is not saved. I have to render it again. Can it be saved. Pre Ele 1 would save.

    when I render a video Pre Elements 12 or 13 and save it to work on later. When I bring it back up the rendered file is not saved. I have to render it again. Can it be saved. Pre Ele 1 would save.

    [discussion moved to Photoshop Elements forum]

  • Auto Render not working!!!!

    My preferences are set to Auto Render all open sequences after 1 minute, but nothing starts rendering!!
    What is going on??????????

    You have to stop using the application. It does not background render.

  • Render Quits Unexpectedly, Progress is not Saved

    While rendering today I the render progress kept quitting after 1-5% The render progress was not saved, and I could not locate the render file that fcp looked for when I restarted it. This happened about 6 times.
    My temp fix is hovering the mouse over the render progress window and placing something heavy on the button. Seems to work for now, but I would like a better long term solution. Anyone else had this issue?

    The keeping the render progress window active trick is no longer working.
    The issue seems to be happening with only longer renders. Right now I am thinking it is an issue with Magic Bullet. Lately I have also started getting an error message that says something like: "Misfire: Vignette - Plese verify filter parameters."
    I saw that buffalo, yak, or whatever it is running around on the screen the other day. Wish he would tell me how to fix this.

  • No Auto Render

    I am a new user to Final Cut Express HD, & I'm having trouble with the auto-render feature. I have to render each clip. If it helps, I am using a Sony HDR-HC3 (HDV) Handycam. I am not sure which codec to select in the Easy setup, but so far I have been able to import using the Apple intermediate 720p codec. The problem is that it doesn't show me the video on my screen when it is playing in the camera. I'm sure that has something to do with why it's not auto-rendering each clip that I drag into the timeline from the browser. Someone told me that my video settings for my preview and my timeline don't match. Is this true, and if so, how do I fix it?

    okay. I think I answered my own question about the capture feature, and why I am not able to see the video footage on screen when I am capturing. See the article on http://finalcutpro.digitalmedianet.com/articles/viewarticle.jsp?id=47073
    It says, "The second issue many editors will encounter when working with HDV footage is during the capture process. When capturing you have no deck control. You simply start playing the tape, open the capture function, name the clip, and capture will occur until you press the escape key."
    Okay...understandable - but why the no auto render?

  • Auto render XML (aepx) file

    Is there a way to auto render a composition in a XML (aepx) file? Watched folders does not support that. Is there a way to incite render through terminal console?

    No.
    You can submit a feature request here:
    http://adobe.ly/feature_request

  • Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

    Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

  • A cautionary tale:title 3-d and auto-render

    Working along happily. Did a manual save. Double clicked a title 3D clip in my timeline and opened the control panel window to change some text. Phone rang. Had long conversation. Went to lunch.
    Came back. The little auto render complete box was showing it's ugly head. Clicked OK. NADA. The titler being open effectively kicks you out of fcp so you cannot accept the finished auto render. FCP effectively locked up. Cannot close title tool.
    Had to force quit. Nothing lost because of the save and my autosave vault is set for 5 minutes.
    However, I think I'll turn off the auto render.

    Yep,
    Auto render can mess things up if you are using multi-clip as well.
    I leave it off.
    x

  • My Render doest not start help!

    My Render doest not start, it appears that isnt even processing anything, not even estimated time or frames in my render folder, please help me as soon as you can i'm desperate!

    We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • ReportViewer Parameter area state not saved without to refresh in ie

    Hi from Germany,
    we have created a master detail report with 3 levels and some parameters defined. Connected are these 3 reports by drill throughs with "go to report"-actions. We use the report manager for the navigation to the reports.
    For a faster go back from a detail report to its higher level report again we added links in the header with go to url actions and the expression "javascript:history.go(-1)").
    It works great but in the ie (version 10 and 11, too) there is a not wanted behavior after the user has updated the parameter values and clicked on "Show report". The report is rendered now with the changed parameters fine BUT the parameter area
    is still opened.
        First question: Is there a way to collapse the parameter area also with the click on "Show report"-Button?
    Now users close often the parameter section and drill through to the next level report. When you go from there back (history.go(-1) or also with the browsers back-button) the report before opens but again with an displayed parameter area. It forgots that users
    have collapsed it before.
        2nd question: It seems that the last state with the closed parameter area was not saved (in the session?). Can someone explain me why and if there is a way to solve it?
    In firefox it works like we wanted. There is the parameter area collapsed automaticly after go back in history. It seems it is realy a bug in the ie.
    I have found out a workaround:
    when you close the parameter area in ie and click after it on the refresh-button on the reportviewer-toolbar then the collapsed state is registered and go back to this report opens it right with collapsed parameters. Also a refresh by the browser-button opens
    the report with collapsed parameters.
    It seems for me it is a bug, isn't it?
    Kind regards
    René
    René

    Hi René,
    If I understand correctly, you want to hide the parameter area when the report render in report server. I have create a simple report to test, however, I cannot reproduce the same issue.
    Based on my test, it has two situation when we go to subreport the parameter area cannot hide.
    If we are use “Go to URL” action jump to the subreport, it will not hide the parameter area.
    We have not pass the parameter value to the subreport, it will display the parameter area for us to choose parameter value.
    If you are not above situation, we can use “Go to URL”
    action to work around it. To add parameter (rc:Parameters, rc:Toolbar) in report URL to control the parameter area visibility. Please refer to the following URL:
    Http://ServerName/ReportServer/Pages/ReportViewer.aspx? %2fReportFolder%2fReportName&rs:Command=Render&rc:Parameters=Collapsed
    Reference:
    http://blogs.msdn.com/b/jgalla/archive/2009/03/23/hiding-parameter-area-when-viewing-reports.aspx?Redirected=true
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • FCP Multicam Editing Problem, Not Saving

    i have been editing on final cut for several years now, but i have never had a problem like this. i am editing a wedding using the multicam function, but every time i hit the space bar to pause the sequence all of the marks for the cuts disappear and are not saved. the entire clip goes to which ever angle as selected last. if they is anyone who has experienced this and could help it would be appreciated, thanks.

    i have been editing on final cut for several years now, but i have never had a problem like this. i am editing a wedding using the multicam function, < </div>
    Welcome to the family.
    You're saying: A) you've been using multicam for several years or, B) this is your first use of multicam after all these years?
    The section in the manual is explicit and a bit confusing but following the step-by-step procedure is absolutely necessary the first few times so you figure out how the thing is supposed to work. I think it's weirdly non-intuitive but they didn't ask me.
    Remember also that multicam is an effect and will render. Once it renders, you must unrender to make additional edits. Needlessly adds to the confusion.
    bogiesan

  • Outlook error "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"

    Hi,
    Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list.  The operation failed" 
    I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
    She is also getting this error when she tries to remove a delegate.
    I have tried recreating her mail profile.
    I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
    She is on Exchange 2010
    Any assistance would be appreciated.

    The article you provided is not related to the error message that the user is getting it.
    Can you please provide better solution? I know this answer and this post is old but I am having same issue.
    The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

  • Configuration setting not saved

    hi,
    When i receive configuration setting for web beowsing on my mobile from my service provider.I get a message " trusted server setting received but not saved.message could not be authenticated and deleted."So i am unable to browse the web.Please help me .

    You seem to have deleted the settings message from your service provider. Contact them and ask them to send it again. This time after you receive it you need to save it and it should auto install. Also sometimes there is a password to save it. If there is, the service provider usually sends you a separate message with with it.

Maybe you are looking for