Auto resize photo for mail

Hello,
Symbian Anna allows me to choose the size of pics I want to send via MMS.
Unfortunately, when I chose mail, I get the full picture attached to it.
Is there a way or an app that could do it automatically ? (I know I can edit and resize but it takes too much time).
If not, it would be very good to think about it in future development.
Thank you in advance for any useful answer

If you don't check the option to allow users to download files, then only 800x600 sized photos are uploaded to .Mac. If you are allowing downloads, the photos are limited to roughly 6MP (I can't narrow down the exact size) when uploaded. If neither option works for you, you might have to export them. I don't know what size iWeb uses.
If your photos are 8-10MB each I'm assuming they're RAW format. RAW always gets converted to JPG so even before being shrunk to within 6MP, they'll be 1-3MB JPG's. Hope this helps.

Similar Messages

Resize photos for online use

I have been trying all afternoon to resize photos for online use and can not follow directions given. I know it must be simple but I am stumped. I would like to speak to a real person and I'm sure my problem will be solved in less than five minutes. PLEASE do not tell me to follow guidelines; I have tried that.
Kay Wilhelm

Hi Kay,
As an example, let's say we're trying to prepare this 1000x664 pixel, 1MB image for online posting.
If the website you're posting to is giving you a maximum dimension, for example that the image has to be 600 pixels across or less, then follow these 4 steps:
1. Go to File -> Save for Web
2. In the Save for Web panel, look for the Image Size boxes.
3. Enter the desired dimension. For example, if the website you're trying to upload to requires that images be 600 pixels across, enter 600 in the Width box. The height should recalculate automatically.
4. Hit the Save button. You will now have an image saved to the required pixel dimensions!
If the requirement is for a maximum file size, rather than specific file dimensions, you would follow a different procedure. If we were trying to resize the same 1000x664 pixel, 1MB image to a size of 100KB or less, we would follow these steps:
1. Go to File -> Save for Web
2. In the upper right hand corner of the Save for Web panel, make sure the format is set to JPEG. Our original image was a PNG, which tends to have a larger file size. JPEG images tend to have a smaller file size.
3. In the Save for Web panel, look for the projected size of the file as saved with the current settings. This is below the lower left hand corner of the image. In this case, it is 170KB, which is higher than our desired maximum size of 100KB.
3. The easiest way to control the file size at a given pixel dimension is by reducing the image quality. The controls for image quality are in the upper right hand corner of the Save for Web panel. The default setting for JPEG exports is 60%.
4. You will need to determine how far you want to reduce the image quality in your particular case. In this example, we can reduce the quality from 60% to 40% without affecting the visible image quality too much. Setting the quality to 40% reduces the image size to 99KB, which is below our maximum of 100KB.
5. When you are satisfied with the quality settings, press Save to save your image.
Hope this helps!

Shrink Photo for Mail Signature

I am trying to add a photo to mail. Any photo I use gets enlarged. Any suggestions?

Hey there coachflash,
It sounds like you are using a photo in your email signature and rather than staying where you resized it in the mail preferences, it keeps going back to original size. I would change the size of the image with the Preview application, save it, and use the updated picture in your signature:
Preview 5.x: Resize an image
http://support.apple.com/kb/PH5936
Change an image’s dimensions
Choose Tools > Adjust Size.
Enter new values for width and height, or choose a common size from the “Fit into” pop-up menu.
To resize the image by a percentage, choose “percent” from the pop-up menu next to the Width and Height fields, and enter the percentage in those fields.
To ensure that the image keeps its original proportions, select “Scale proportionally.” If you change either the width or height, the other value changes to maintain the proportions. If you choose a size from the “Fit into” pop-up menu, the image’s width or height may be smaller than the chosen size to maintain the proportions.
To make the image’s dimensions smaller without losing any detail, deselect “Resample image” before changing the width or height.
To resize multiple images at the same time, display the images in the same window, select them in that window’s sidebar, and then choose Tools > Adjust Size.
Thank you for using Apple Support Communities.
All the best,
Sterling

Resize photo for web

My photo in iPhoto are more than 2000x2000 pixels, 8-10 MB each. Whehter iPhoto Gallary or iWeb auto resize them? No point for me to have large files on web. And I need thousands online.

If you don't check the option to allow users to download files, then only 800x600 sized photos are uploaded to .Mac. If you are allowing downloads, the photos are limited to roughly 6MP (I can't narrow down the exact size) when uploaded. If neither option works for you, you might have to export them. I don't know what size iWeb uses.
If your photos are 8-10MB each I'm assuming they're RAW format. RAW always gets converted to JPG so even before being shrunk to within 6MP, they'll be 1-3MB JPG's. Hope this helps.

How to resize photos for web pages

Can photos be resized within iPhoto to be used on a web site? If not what is the best program to do this to keep good quality photos but have a fast reloading time.

I need to edit photos for print and then create a second version for the web.
You can resize photos as you export from iPhoto - use a custom size and set what you need and upload the exported photos
This is how you do that - you can not "resize" within iPhoto - you resize (and make another copy) when you export.
As to your saving photos form PS into the iPhoto library and wondering why it does not work - it is becaus you must NEVER make any changes of any sor tto the structure or content of the iPhoto library using any program other than iPhoto - saving a photo into the iPhoto libray is not supported and will not work - you set PS as the external editor and when you finish editing you save and iPhoto handles the new image
LN

Unable to resize photos for wall paper

Photos for wall paper cannot be resized to fit screen in iphone or ipad wats the fix

Found on another question. Worked on iPad
Apple
Store
Mac
iPod
iPhone
iPad
iTunes
Support
Languages
iOS 7: How to reduce screen motion
You can reduce screen motion in iOS 7. iOS 7 uses a parallax effect to create the perception of depth on your Home screen and elsewhere.
To reduce the effect, you can turn on Reduce Motion in Settings > General > Accessibility. When you turn on Reduce Motion, Home screen transitions will fade instead of zoom.
When the parallax effect is on, you may notice the following:
Wallpaper, icons, and alerts shift slightly as you move your phone.
When you set a wallpaper in Settings > Wallpapers & Brightness, the photo or image will be slightly zoomed and can't be scaled to fit the screen.
If you zoom in, you will need to rescale your wallpaper to fit to the screen. You can't rescale certain photo formats, including landscape or square images.
To learn more about iOS 7, refer to the user manual.
Last Modified: Nov 6, 2013

Auto resizing tables for screen resolution

Hi everyone.
Im currently working on my website using dreamweaver, and i
just stumbled across a problem. Im building my website for screen
resolution 1020x768. However, alot of people tend to use 1280x1024
nowadays. The problem is that images get all screwed up at
different screen resolutions.
The best way to fix this would be auto resizing tables (so a
1280 using can view my 1024 website without any problems). But, i
have no idea how to create this. Ive been trying dreamweavers help,
but that didnt help me.
So i was wondering if anyone around here has the solution for
my problem.
Thanks in advance!

Hi everyone.
Im currently working on my website using dreamweaver, and i
just stumbled across a problem. Im building my website for screen
resolution 1020x768. However, alot of people tend to use 1280x1024
nowadays. The problem is that images get all screwed up at
different screen resolutions.
The best way to fix this would be auto resizing tables (so a
1280 using can view my 1024 website without any problems). But, i
have no idea how to create this. Ive been trying dreamweavers help,
but that didnt help me.
So i was wondering if anyone around here has the solution for
my problem.
Thanks in advance!

Resize photos for slideshow

Hi All,
I use PSE3 for Mac and have been putting together a lot of slide shows and then burning them to DVD in iDVD. My problem is that all the portrait photos leave a black margin on either side of the photo when viewing the DVD on the television. I read that to eliminate that you are to use an imaging software and resize to 640 x 480. However, that isn't possible--when I do that the picture is all squished. Is there any way to work around getting that black margin on portrait photos for slide shows? The problem is eliminated when using landscape photos. That also brings up the problem with wide-screen viewing now that it looks like the industry is leading us by the nose into that format whether we like it or not! Does anyone have a solution or a way to work around this?
Thanks!
Debbie

You could try making a blank canvas of the correct dimensions, then copy your photo onto it. Now you can crop, resize, reposition, add text, graphics, or color blocks to fill the blank space etc.
This method would give you more control over what is seen in the final slide show.

Resize photo for facebook cover page

Hi - I've followed step-by-step instructions in Lightroom to resize a photo for a facebook cover page. It's not working. In simple terms, I want to shrink the photo so that it fits the facebook cover page size. Can anyone help? Thanks

Select your image thumbnail in the library and from the top menu choose:
Photo >> Create Virtual Copy
With the virtual copy selected (highlighted) click Develop
Click on the crop overlay or press R on the keyboard
Click on the dropdown menu to the left of the padlock and choose Enter Custom
In the dialog box enter 8.51 x 3.15 for the aspect ratio and click OK
Drag with the hand tool in the center of your image and move it into the best position for your Facbook Cover; then click Done
Go back to the Library and click the export button, bottom left.
Click the choose button to select a folder on your hard drive where you want the jpeg saved
Scroll down to File settings and choose:
JPEG
sRGB
Quality Slider 49 (this will keep compression low for fast loading on your facebook page)
Scroll down to Image Sizing and check Resize to Fit
Choose: Width & Height and enter
W 851 H 315 and choose pixels from the dropdown menu
Enter 72 for resolution and choose pixels per inch from the dropdown
Scroll down to Output Sharpening and check the box Sharpen For
Chose Screen from the dropdown and Standard
Scroll down to Post Processing and choose Do nothing – next to After Export
Click the Export Button
When the export has finished (see progress bar top left) go to your folder to find your cover pic.

Resize photo for e-mail

On my BB Curve 8330, when I attach a photo to an e-mail, it gets resized. Now, on my 8900, it gets sent full size. I want to take full-resolution photos, but I'd like to send out e-mails with pictures that are smaller. Is there any kind of setting to do that automatically? I've looked everywhere obvious to me, but I couldn't find such a setting. Seems like a feature that disappeared from the BB, but maybe most people don't regard it as a feature to begin with?

The way I'd do it, which may be a bit convoluted, is to open a movie you want to resize.
From the QuickTime menu, select File, then Export. The resulting window will have a section called "Export:" Assuming your original file is .mov, click the up/down arrows to the right and select 'Movie to QuickTime Movie', then click the Options button and adjust the size there.
Good luck
srb

How to resize photos for email

I have a MacBookAir 10.9 OS 0 in IPhoto...how can I resize any photo to send by email?
Thanks
dognose2

With a web site, do not post high resolution images as the primary view of your products, that makes your site slower to load on lesser broadband connections, and more expensive to view on wireless connections.
For a web site, use lower-resolution and smaller images for the primary view, and use a web content management system that allows for (for instance) clicking on a photo to view a higher-resolution image, and/or a content management system that allows the user to access a higher-resolution gallery of images.
Default display of and mailing of larger and higher-resolution images chews up potentially very expensive data for folks on wireless connections, and usually won't be popular with mass-mailings. Lower-resolution and smaller and even thumbnails with web links to higher-resolution images — which can incidentally also include tracker URLs, even in HTML-based mail — will consume less of the mobile recipient's cash, and will load and view much faster, or will load. (On iOS, large messages will give the user the option to download the rest of a larger message, which means that most of your mail often won't even get viewed.)
Slow loads and large images can result in web connections get abandoned and mailing list clients drop off lists, too. Thumbnails and text and simple HTML are better.
As for "a good size", run some of your own tests on lower-performing network links, and see how well your content management system and your mail works in these situations — you're probably not aiming for customers on dial-up though I still deal with folks that only have that available — but you're definitely not going to want to assume ginormous network bandwidth with your marketing. One megabit per second (1 Mbps) "broadband" links — and slower — are still very common, after all. Also test your HTML with a few different clients, as there are various differences in how (or how well) HTML is rendered in various mail programs — some HTML mail looks like junk in some common clients.
All of this stuff is fairly typical fodder for web and email marketing discussions, and not at all specific to OS X.

Help in resizing photo for masthead

I am trying to resize a photo from 3264 x 2448 to 600 x 149 and I just can't seem to do it.
I'd appreciate a how to...need it for masthead.
Thanks,
Toni

You can do it with the crop tool which is more visual.
After choosing the crop tool, select unrestricted or custom and type your dimensions 600 x 149 into the width and height boxes. Type 72 into the resolution box.
Drag your crop tool over the entire image then click in the middle to reposition it to get the best composition bearing in mind the original aspect ratio will be different.
Click the green checkmark when you are happy and re-save.

How to do Auto Resize Photo Gallery

I want to create a photo gallery where the photos don't have to be the same size. I need the photo border or container to smoothly resize to accomadate each new image. Can someone explain the basic procedure to accomplish this with Flash?
Thanks for the help, Mike

This does work. Thanks very much for all your help. If you don't mind, I just have a couple more questions and then I will let you get back to your normal life. Let me see if i'm reading this right...First you retrieve the dimensions of the loaded image; then you set the loader object's dimensions to match the starting dimensions of the MC that will contain the photo; then you put the loader object inside the MC container; then you resize the MC container to the size of the photo. Right? 1st question: why is it necessary to set the loader object's size to match the initial size of the container MC? I tried adding the loader object to the MC without resizing the loader object first, and it didn't seem to change the outcome of the movie. 2nd question: Now that you've solved the general problem, I suppose all I have to do is change the final step in the procedure. Instead of simlpy setting the dimensions of the MC container, I should apply some sort of tween to the MC to make transitions between photos a little more interesting. Yes?
var imagePath:URLRequest = new URLRequest("testPhoto3.jpg");
var imageLoader:Loader = new Loader();
imageLoader.load(imagePath);
imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, getDimensions);
function getDimensions(evt:Event):void
//get the height and width of the loaded image
var ht:int = evt.target.content.height;
var wi:int = evt.target.content.width;
/*set the dimensions of the loader object equal to the starting
dimensions of the MC that will hold the photo*/
imageLoader.width = photoBox_mc.width;
imageLoader.height = photoBox_mc.height;
//put the loader object inside the MC that holds the photo
photoBox_mc.addChild(imageLoader);
//resize the MC that holds the photo
photoBox_mc.width = wi;
photoBox_mc.height = ht;

PSE 8 on MAC 10.6.2 Resizing photos for web use

Please can anyone assist me. I cannot alter the sampling options when resizing my photos to create smaller files for uploading to web pages.
so at present Constrain proportions is ticked and I am unable to change it.
W,H and R are locked
Am unable to choose from list beginning:
Bicubic (best for smooth gradients) How do I unlock all these to enable me to change specific items.
thanks for any advice.
ScattyWoman

That is very strange as I had tried turning that on before and nothing had happened.
Now it has. Maybe when I closed my machine down it somehow triggered it back if there was a glitch.
thank you Barbara, you have made me happy again.
I am not sure I need to strip the exif if I am putting them up in my Picasa album but I will try one to see what , if any effect it has on the picture in the gallery.
You have helped me in the past under a different name BUt I couldn't seem to find my login details so I started again. :-)

Resizing photos for a website?

I a building a website and when I resize -- even to make a photo or logo smaller -- everything gets wavy and low-quality. Help!

I like to keep the footprint of my web images as small as possible. Especially for mobile users who must pay for bandwidth. Nothing chops a mobile data plan to hell faster than a web site that uses excessively large images. I only use 100% quality for printed output. On the web I compromise at 20-50% quality to keep the file size down & improve page load speed.
Go to File > Save for web. Use the 4-up panel and compare image quality with file size. See screenshot.
For Photos, use JPEG.
For Gradients or graphics requiring alpha-transparency, use PNG-24.
I rarely use GIFs anymore.
Nancy O.

Auto resize photo for mail

Similar Messages

Maybe you are looking for