Auto resolve alert - Polling interval

Hi,
When service is stopped, alert is generated but once i restart the service alert gets auto-resolved within a minute.
When alert is generated if database size is full, once we increase the size it will take more than an hour for alert to get auto-resolved and move to closed alert.
Can anyone let me know how auto-resolve works and can we change polling interval settings for this.
Thanks in advance
Bharath

Thanks Natalya
But how long it will take for an alert to get auto-resolved and move to closed alert once the issue is resolved
in the link "When the monitor is in that unhealthy state it might
turn healthy again in the next interval" What is the next interval here,how to change the interval settings.Do we have global setting for this?
Regards,
Bharath

Similar Messages

Polling interval for triggering alerts

Is there a way to set the polling interval for alerts. I'm getting 2 alerts for the same message id. I do not want to supress multiple alerts, our alert config scenario is rather generic.

Aamir,
I found this SAP note 913858 that talks about something similar but we are on 7.0 SP9.
Q11: Why do I sometimes receive two alerts when an error happens in a receiver adapter?
A11: This happens because two independant components of the Adapter Framework react simultaneously on the error. The problem will fixed with SP17.
And it seems to stem from the receiver adapter.
Thanks,
Pam

Poll Interval, Msecs To wait before modification checks & Queue Name in CC

Hi All,
I have 3 inter-related interfaces which is having 3 File Sender Communication channels as below charasteristics;
All 3 ccs are running on a common Queue Name inorder to cater the business scenario;
so PI should consume the files in the same sequance of files are copping into the locations;
(time gap between incoming files is around 1-3 secs)
Existing Values in Production system
IF086
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 1
IF913
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 2
IF084
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 3
we are having PI Alert email configured in the system;
when we get a big files into the locations, we get an unwanted Alert emails saying Error;
when I check PI, Overall file transfer is successful,
but we have the below error in the Message Display Audit log as
"Channel CC_Cxxx: Attempt to send file 'T201_200909141702' failed because file was modified during processing. 0 bytes expected, 1202248 bytes found. Trying to resend file"
but Overall file transfer is successful;
Does anyone can explain the reason for this error; ?
Also to remove this error & unwanted Alert email (since final status is successfull), I changed the Poll Interval to 3 for all 3 above CCs; Now I dont get the above error;
Do you think there might be a sequance issue due to this change;?
(time gap between incoming files is around 1-3 secs)
quite lengthy to explain sorry;
Appreciate your help please
thanks
Iver

Hello Iver
Question 3 in the note #821267 FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter, explains what is happening here. This answers your first question.
The file in question was being written to by another process when the file adapter attempted to send it. Depending on the length of time/amount of data that is being written to these files, increasing the polling interval to 3 seconds will help.
Regards
Mark

Auto mail alert on ID lock

Hi All,
I am looking to send auto mail alerts to user when the ID is locked due to incorrect logon attempts or advance mail alert if the ID is about to expire in couple of days.....I was expecting that SAP ECC provides standard way to deal with this as any other application....
It so happens that the user comes to know about the ID expiration on the day when he tries to logon and the pain going through support process waiting for day to get it resolved.......There should be proactive way to deal with this kind of situation so that the user is alerted in advance without causing business impact waiting for it to be resolved...
Any suggestions on how this can be achieve???
Regards,
Milan

There is nothing in standard, but it is very easy to implement on your own if you need it. I also found a way to lock / unlock in intervals (try the factory calendar...) and the user BAPI's can do just about anything which SU01 can do as well.
A downside to that which you are attempting is that a mail alert to tell someone that their password has been locked or is about to be locked would "trigger" them to logon only for the purpose of keeping the account alive. Some people do this anyway and is the wrong motivation for a person to keep their user ID in the system. So your users will start appearing to be more active, where in fact they are not actually using the system.
If for your levels of user activity and intervals (e.g. quarterly planning) the policy is too strict, then you can either relax the policy or use user groups to isolate one of them as an execption.
There was at least one question asked before which provided many details on how and why to do this. Just make a simple search.
Cheers,
Julius
> Total Questions: 46 (42 unresolved)
Please clean up your neglected questions. The "Comment" field is not mandatory when closing a thread (to avoid bumping all ancient irrelevant questions to the top of the forum again).

XI file adapter polling faster than poll interval

Hi,
We are facing a issue with the file adapter/authorization of the FTPUSER.
We FTP a server and pick up a file from a particular folder.
My polling interval is 2 minutes
My retry interval is space.
Processing mode : ARCHIVE
We are archiving it on a Network attached server(NAS) mounted on our XI server.
When XI polls for the first time it picks up the file but the sender file adapter shows following error in RWB.
<b>2006-01-20 11:31:08 GMT: Error: Deleting of file 'ARUCSjnewb80.txt' failed - cannot proceed: FTPEx: ARUCSjnewb80.txt: Access is denied.</b>
The picked up file gets processed but at the same time just within 12-13 seconds of the first poll XI picks up the file second time and then in another 3 seconds for the third time.
After this the file gets archived thrice in the archive directory and then gets deleted from the source directory.
We are unable to understand why XI is polling again after few seconds of the first poll.(As per my understanding it should have polled after 2 minutes).
I am able to delete the file manually from the Ftp server.
Could anyone give a pointer towards what we are missing or what probable reasons could be?
authorization issue?( XIADM /ftpuser have full authorization)
Some adapter setting?
Regards,
Sulakshana

Hi,
Could you let me know how frequent the file gets loaded to the FTP server.
Is your file size too large to get loaded.. If so try to increase the polling interval. Also make sure that you have provided the polling time in sec and not in minutes...i.e for 2 minutes it should have been specified as 120 sec as polling interval
Regards,
Nithiyanandam

Can we have a high Polling interval

Hi All,
It is a File to R3 scenario. I have three questions:
1. Can we have a polling interval as 5 hours. If not what is the least time that can be given.
2. The files might be put by the users in the end of the day. So, can the communication channel be turned on and off only when the files are put in the ftp. And if the channels are on all the time, is it a problem.
3. The Production landscape was also configured newly. Now i have done the configuration in Production. The receiver channel is a XI adapter. Now can i check if everything is working fine. I mean how can i check if the data will get transferred to the R3.

Hi Lavanya,
>>>Can we have a polling interval as 5 hours. If not what is the least time that can be given.
Setting polling interval in comm channel level is not best practice/suggestable...you can schedule the channel in RWB ATP so the channel would be available in that perticular time period
>>>The files might be put by the users in the end of the day. So, can the communication channel be turned on and off only when the files are put in the ftp. And if the channels are on all the time, is it a problem.
Though the channel available all time it is not a problem...but any way if you think files will be arrived only at perticular time then ATP scheduling would be the better option
>>>The Production landscape was also configured newly. Now i have done the configuration in Production. The receiver channel is a XI adapter. Now can i check if everything is working fine. I mean how can i check if the data will get transferred to the R3
you can check SXMB_MONI transaction in SAP ECC system
Also check the below blog for ATP:
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
Regards,
Naveen

How to set polling interval for database adapter in interconnect?help plz!!

Hi
i have 4 database adapters with same name subscribing to same event in 4 different interconnect instances(i.e., same business event and application event in different hubs) and pointing to same source application database , same destination application database.
source application database have one oai bridge schema.When a message has to be sent,message will be enqueued in messageobjecttable.This message can be taken by 4 databse adapters.and send to 4hubs then 4 messages will be sent to destination application instead of single message.
To avoid this,I want to set database polling interval in 4 adapters sych a way that if one adapter take message in MESSAGEOBJECT TABLE,the other three adapters don't pick same message.
this way i can avoid redundacy at destination application.Please reply soon
Thanks

You would seem to have an extremely unusual use case for interconnect. The whole purpose of Interconnect is to concentrate the message processing into one hub and distribute the message to those applications interested in it. The use of 4 hubs from one application is probably not supported for precisely the reasons you are having trouble. Can you give us more details of your use case?
I am not sure that adjusting the polling interval for the different adapters will help. Since at some point you will get a collision where 2 or more adapters poll at the same time.

Auto resolve not working for cached outlook

We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode. Not in cached mode or via owa, it seems to work fine.

Hi,
Does the issue happen to all users or some specific users?
Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

Polling interval in file adapter.

Hi,
I have a doubt regarding the file adapter polling interval.
Suppose we get a file of size 512 MB and PI file adapter taking long time (say 15 Min) to process it, we have a polling interval of 10 min.
I have a 2 doubt in this case.
1. what will happen in the next polling interval. because the older file still is in process and it is still in the source folder location.
2. if at the same time there is new file get places in same folder location. then how the file adapter behave in this case. Is it start picking the second file or again poll the incomplete file.
I want to know that is PI maintaining some lock while processing some file from source folder.
regards,
Navneet

Hi,
I guess normally it should process both files, earlier one which is in process and the new one as well (it depends your selection string in file name scheme).
Also refer thsi Wiki to help in avoiding duplicate file processing:
http://wiki.sdn.sap.com/wiki/display/XI/DifferentwaystokeepyourInterfacefromprocessingduplicate+files
Regards,
Divyesh Vasani

Sender File Adapter always "Polling interval started" without complete

Hi,
I have problem with sender file adapter suddenlty the status from Communication Channel Log monitoring always with polling started without completed.
4/25/11 11:40:33 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:23 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:13 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:03 AM   Polling interval started. Length: 10.0 seconds
Normal :
4/25/11 11:41:50 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:41:50 AM   Processing finished successfully
4/25/11 11:41:50 AM   Processing started
4/25/11 11:41:40 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:41:40 AM   Processing finished successfully
4/25/11 11:41:40 AM   Processing started
I have tried to stop and start the channel but still no luck. This problem only happen for this particular communication channel others channel is working fine.
Please advise other solution before i need to restart the java engine since this in the production environment. The problem is some of the process was delayed because this issue. CC was delayed to pickup the file.
Thank You in advance.
FL

Hi Abhistek,
Thank you for your correction. It was typo.
Which assumption is correct ?
1. All 3 instance running together in the same time ? or
2. Either 1 of the instance running once time manage by clustering setting.
Example :
15:01:00   ---> A
15:02:00 -
> A
15:03:00 -
> B
15:04:00   -
> B
Currently :
15:01:00   -
> A
15:01:00   -
> B (lock)
15:02:00 -
> A
15:02:00 -
> B (lock)
It seems all 3 instance lose control from clustering ?
Regards
FL

Sender File Adapter - Restrict number of file polled at each poll interval

Hi all,
PI 7.0 SPS16.
We would like to know whether it is possible to configure a sender file adapter (file conversion mode) in order to restrain the number of file taken at each poll interval and if yes how ?
Thanks for your future answers.
Jean-Charles

Hi Jean
Standard adapter do not provide functionality to take an input like number of files to be taken at poll interval. But using adapter module you can achieve this.
SAP PI is having the function to set poll timings and scheduling. You can write adapter module and execute this module using File adapter type communication channel before the standard bean and you can restrict the number of files.
Check the link given above as well as this How to Guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
Thanks
Gaurav

Problem with Polling interval at sender side in JDBC adapter

Hello,
I have some problem in investigating one serious issue using this polling interval,
I am using the sender JDBC adapter where i used polling interval as
60(in secs) and 1(in Msecs).
So it comes upto 60.001 secs of polling interval.
There are nearly lots of threads which are in sleeping state on one particular sender channel making the J2EE hang. When i went to look inside the CPA cache i saw that the polling interval was mentioned as only 1Msec rather than 60.001 Secs because of which with in some seconds all the threads are blocked and J2EE hangs due to lack of threads.
Can you please provide some solution to this problem as soon as possible?
Here are few questions which i got when i am doing this process,
1. Is that the polling interval is sum of 60(secs) and 1(msec)?
2. Which value is been read either secs or msecs?
3. Will there be any precedence among those two values(secs and msecs)?
THanks,
Soorya

Poll Interval (secs)
Number of seconds that the adapter must wait if no files are found for processing.
● Poll Interval (msecs)
Additional waiting time in milliseconds.
If you set Poll Interval (secs) to null, processing times will be short and close to real time.
If you set Poll Interval (secs) and Poll Interval (msecs) to null, the adapter is only called once.
● Retry Interval (secs)
Specify the number of seconds that the adapter is to wait before a file processed with errors is processed again.
If the value is set to null, then the adapter is canceled if an error occurs, even if a value greater than null is specified for Poll Interval (secs).

Poll interval for sender file adapter.

I have a 1_sender file NFS file adapter which picks a trigger file from X location in PI application server, this trigger file initiates the unix script present in the sender file adapter.
Unix script brings all the file which starts with 25588* from bank FTP and places in Y location in PI application server then script deletes the "trigger file".
another NFS File adapter 1_receiver file adapter places the trigger file in the X location of PI.
for 1_sender file poll interval given as 86400, that means it should trigger only once a day @ 1:30pm.
But today same sender file adapter had triggered 4 times, could any one let me know the reason why it had triggered 4 times instead of single time.

Vidya,
There are two things :-
1. The polling interval should be 24 hrs;
2. The polling interval should be 24 hrs and it should poll at 1:30 pm every day.
For any reason if the channel is re-started, then with your present configuration, you will never be able to achieve # 2.
So, better use ATP.
But today same sender file adapter had triggered 4 times, could any one let me know the reason why it had triggered 4 times instead of single time.
Might be the connection dropped / failed at the time of polling and the channel re-tried. If you give more details (what time and with how much interval it triggered), someone might be able to help.
Regards,
Neetesh

Get poll interval parameter from adapter module

Hi,
I'd like to make special treatment in my adapter module based on the "poll interval" information filled in Processing Parameters part of the adapter configuration.
Can an adapter module access this information?
regards
Yann

Hi Yann,
>>>>Can an adapter module access this information?
of course it can you just have to use
a correct parameter's name
check this post to get the java code
Re: Access the URL Parameter from a Adaptermodule
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to increase the files picked up by File Adaptor per poll interval

Hi,
We have a scenario where in we post 80 files in the source directory and and the file adapter is configured for every 300 sec but i have noticed that the File adaptor is picking up one or two files per poll interval.Can some please suggest how to increase the number of files picked up by File adaptor
Thank You,
Nandini

Nandini:
Did you mention all the files names in the Adapter channel. One thing you can do is use wild cards and file adapter picks most of them
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
In case if your files are huge, then I guess file size may cause to process few files during each poll

Auto resolve alert - Polling interval

Similar Messages

Maybe you are looking for