Auto restart, resetting

While using a variety of applications iPad 16gig first gen automatically restarts itself. Goes black then start screen then home screen.
Restore as new, restore with backup applied both result in, sooner or later, a crash and restart.
Newest operatiing system is installed via iTunes.
Is anyone else having that issue?

Yes. I m having the same problem. Does anyone know how to remedy this problem?

Similar Messages

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

Auto Restart Issue with Mac Book AIR

Have been using a Macbook PRO for sometime, no problem with Parallel installed. Due to frequent traveling, light and compact is my priority now, so I bought another AIR (11" i7 chip w/ Parallel installed as well). It was working flawlessly for few weeks, used it to download a couple of updates when I was in China (approx. 4Mbit/sec line speed) still no issues. UNTIL when I get back to my office and using WIFI updated another few stuffs, the AIR started to behave strangely with "your computer needs to restart due to problem ..." the last few days it happened at least 10 times daily, so I did what I know with the usual Mac way, reset PRAM, repair permissions blah blah blah ..problems persists so I called the service centre and the technician I talked to suggested the issue could be from 'your moderate internet speed causing incomplete system updated files.' ; half convinced but I followed / reinstalled ...with no CD, it has to press option to select to reinstall -- only then I realized a big problem, originally it states requires 27 hours to reinstall a fresh LION in my AIR but finally it completed and restated in still about MASSIVE 7-1/2 hours time.
As I have bought a USB network connector now (a convenient gadget when stays at hotels with different levels of facilities offered), this is not so troublesome and I think fellow users should consider using network and avoid using WIFI for this purpose. I notice once the left USB once was used (without turning off the WIFI) it keeps breaking the connections, as I read some articles from this forum the left USB could has some stability issues. After all the time spent, the computer freezes at times and auto restarts again. What the heck has this causes the AIR to behave this way ?
NEXT, I also read on the Power issues, I bought it without realizing one of the technical highlight is on high performance battery management but you can chop my head off and sit on mine if the AIR can last 3 hours (probably the suggested time is with computer power on but without using it at all). I don't want to sound un-nice as I have been using Mac for many many years: 1) if AIR is entirely basing on internet (VERY HIGH SPEED) for support is not a really very friendly method for users if there is reliability issues via internet line support, says what if we are caught in remote area with 30k/sec line speed then we are totally dead ... ; 2) the recent scare makes me dare not using the software updates now, as technician suggested, write down what is required to update, find it from apple and do it manually ...Goohs, my Mac Book Pro using side by side doesn't has this issue. Since when was the last time I have to suffer maintaining a Mac myself ? ... @%#&@*!(!
Anyone has clue to these or simply return to service centre to handle for me ?
Thanks in advance (first time user in this community).

Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio

Switch WS-C3750X-24 Auto Restart

Dear Cisco Team,
My switch-02 mostly auto restart which running as switch stack with switch -01.
I checking found that the Last reset from power-on
Please share me the solution.
SFSW-B#sho switch stack-ports summ
Switch#/ Stack Neighbor Cable Link Link Sync # In
Port# Port Length OK Active OK Changes Loopback
Status To LinkOK
1/1 OK 2 3 m Yes Yes Yes 30 No
1/2 OK 2 3 m Yes Yes Yes 30 No
2/1 OK 1 3 m Yes Yes Yes 1 No
2/2 OK 1 3 m Yes Yes Yes 1 No
SFSW-B#sh version
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 02-Dec-10 06:08 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
SE-B1-SVRM-SFSW-B uptime is 6 weeks, 6 days, 7 hours, 28 minutes
System returned to ROM by power-on
System restarted at 01:14:45 UTC Sun Feb 8 2015
System image file is "flash:/c3750e-universalk9-mz.122-55.SE1/c3750e-universalk9-mz.122-55.SE1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1636R2EG
Last reset from power-on
2 Virtual Ethernet interfaces
1 FastEthernet interface
56 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 6C:20:56:66:55:00
Motherboard assembly number : 73-12530-08
Motherboard serial number : FDO16361JPB
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750X-24T-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO16360SLN
System serial number : FDO1636R2EG
Top Assembly Part Number : 800-31327-07
Top Assembly Revision Number : A0
Version ID : V04
CLEI Code Number : COMJV00ARD
Hardware Board Revision Number : 0x04
Switch Ports Model SW Version SW Image
* 1 30 WS-C3750X-24 12.2(55)SE1 C3750E-UNIVERSALK9-M
2 30 WS-C3750X-24 12.2(55)SE1 C3750E-UNIVERSALK9-M
Switch 02
Switch Uptime : 8 hours, 6 minutes
Base ethernet MAC Address : C8:9C:1D:E0:F5:80
Motherboard assembly number : 73-12530-05
Motherboard serial number : FDO15070S7P
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750X-24T-S
Daughterboard assembly number : 800-32727-01
Daughterboard serial number : FDO1505182W
System serial number : FDO1506R1CL
Top assembly part number : 800-31327-02
Top assembly revision number : A0
Version ID : V02
CLEI Code Number : COMJV00ARB
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase

can you please share config?

Flash Encoder Auto Restart?

Is it possible to configure the Flash encoder to auto restart
when there is some issue that causes the encoder to stop? And if
this is possible, is it also possible to have it attempt to
auto-restart until the conditions that caused the failure have been
resolved?
My scenario is that the Flash encoder stops and for our live
broadcasting 24/7, we can't have failures like that or have to sit
around watching all the encoders all the time. Basically what we
need is the ability to have the encoder just restart itself using
the same configuration over and over in response to an encoder stop
(for technical reasons, not necessarily that the operator said
"stop")
Thanks in advance!
D

First try > Resetting the System Management Controller
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
and > Resetting the PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then try re-scheduling the auto settings.

Ipad auto restart

Hi, i have an ipad 2. It began to auto restart today, when I connected my Ipad with my computer. I don't know what happened? It did not stop, always restart.

You can try resetting it. HOld down the sleep and home keys, past when you see the red slider, and until you see the silver apple and it reboots.
Barring something being wrong, the most common reason for a restart/crash is memory overload. What are you doing when it crashes? Maybe if you keep track of that you can track down what's making it crash.

Satellight auto restarts every 15 minutes.

Satellight C850-st3nx1. Will auto restart every 10-15 minutes. All on its own.

First, try a System Restore. If that doesn't fix it, move on to these suggestions:
Check if it does it in Safe Mode. If it does, I'd recommend performing a system reset. If it doesn't, try using a clean startup to determine what's causing the problem.
How can I perform a clean startup of Windows 8 without my startup items to troubleshoot a problem?
- Peter

Hi, i cannot shut down my mac, and there is several times lagging, hanging, and auto restart. what should I do ?

Hi, i cannot shut down my mac, and there is several times lagging, hanging, and auto restart. what should I do ?

Hold the power button till it shuts off (10 seconds or so)
Then try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself.
You can also try a pram reset, which has a link at the bottom of the page of the first link above.

Iphone 5 auto restarts

Hi,
I have had my iphone 5 for 2 months, and as of yesterday, the battery all of a sudden has started draining ridiculously fast, and I can't switch the phone off. every time I try it auto restarts.
I have tried the reset by holding down the two buttons for 10 seconds, and it still restarts.
Any ideas?
Thanks

Try Restoring it in iTunes. If that does not work you will probably need to get it serviced.

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

How can I salvage an iPad Mini that will not restart, reset or respond to Recover phase via iTunes and is not responding to any functions and will not access Home? Thanks

I have an iPad mini that will not respond and is non functional. It continues to intermittently try to automatically restart, access home page without success. It will not accept normal charge. I have tried to manually restart, reset and have been unsuccessful. It will not allow a Recover attempt via iTunes as well. Do you have any suggestions before I consider a replacement? Thanks.

Hello RC MD,
It seems you are unable to restore your iPad to factory settings, and it is not responding to power. Based on the information you have provided, it appears your iPad may need to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPad Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Please Help! My MB pro 2010 quit and auto restart when I upgrade my MB Pro with a SSD

Hi all!
Please let me know what's happen with my Mac & help me to solve this problem pls?
Since my Mac is on normall working but a little bit slow. So that's why I update it to SSD. But from that day, when I'm working, it suddenly quit & auto restart without reason, just only appear the warning " Your Mac have problem" & restart.....
Attached here is which appeared on my screen after it auto restart, please go throught it & let me know what I should do for avoiding this problem, pls!
And here is my MAC info :
Macbook Pro 15-inch, Mid 2010
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
Graphics Intel HD Graphics 288 MB
Software OS X 10.8.5 (12F45)
My SSD info:
Total Capacity                       : 256.1 GB (256,060,514,304 Bytes)
Model                                   : V4-CT256V4SSD2
Firmware Version                  : S5FAMM22
Drive Type                           : Crucial SSD
HDD info:
Total Capacity                       : 320.1 GB (320,072,933,376 Bytes)
Model                                    : Hitachi HTS545032B9SA02
Firmware Version                   : PB3AC60W
Drive Type                             : HDD 5400 rpm
Please Help me!
Thank you!

Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

Premiere CC 2014 causing auto-restart?

I have a MacPro 3,1 with 10.10 and 32GB RAM.
During editing in Premiere CC 2014, the computer has auto-restarted twice in the past hour. Both times, I was doing something different in Premiere (dragging several clips forward in time & rendering all video) so I'm unsure as to what triggered it. The footage is stable and on a clean, problem-free external RAID. I also noticed that now, two of my 4GB DIMMs are not recognized. (note: all DIMMs have tested positively with Rember, and are of the same manufacturer) In the meantime, I have removed the two DIMMs in question and now have four DIMMs on the top riser, two on bottom. The two slots that have caused problems seem to be fine now, but with every restart, things changes—that's why I do not believe the issue to be the actual DIMMs themselves.
I have the crash report and need to rule out issues in the crash report if there are any. I will post the report if the smarter people out there believe it to be necessary. I HOPE the problem is with Premiere, the RAM and not one of the risers.

I had a similar problem with Arri Amira Prores 4444 footage and found out the cause from the Arri website:
"When AMIRA footage is ingested into Premiere Pro, the appropriate LUT from the camera is automatically applied as a Lumetri effect, which can be toggled off if necessary."
The way to switch it off is to right-click the imported master clip(s) and go "Remove Masterclip Effects" , the cause of the baked-in look.
Hope that helps.
Kris
editing.dunked.com

I-Tunes Auto-Restart After Closing Program

My i-Tunes began automatically restarting when I close the window on my desktop. It is pretty annoying.
It only restarts after I have had it open. If I have not opened i-tunes it behaves. But, if I open i-Tunes to listen to music on by desktop, and then close the program when I am done, it will restart within 10-seconds.
I am using Windows 7 and i-Tunes 10.2.2.12
I can't find a solution and sfter 15-minutes of trying to find a link to submit a help request, I gave up and am trying this avenue.
Thanks
Walt
PS: In the Product selection below, i-Tunes is not one of them. Hope this gets where it needs to go.

Thanks!
Shall I create de novell partition on the new\replaced HD?
Will Novell recreate the mirrored volumes automatically or shall I rebuild them manually?
TIA
Nanu
>>> Marcel Cox<[email protected]> 07/01/2007 20:47:06 >>>
Nanu Kalmanovitz wrote:
>
>Can be the "auto restart after abend" during the loading of NLMs be caused
>by the second HD dos (drive d:) partition?
Yes. FATFS.NLM tries to mount all FAT partitions it finds, not just the
boot partition. So any problem FAT partition may cause trouble.
>I tried the "FORMAT D: /s /x" command but it display the "Bad track in
>system space, disk unusable" error.
This sounds like your disk is physically broken. As a short term solution,
you can probably delete the DOS partition on D: but not create it again.
That way, FATFS.NLM will not try to fix the broken part of your disk. Of
course, you should as soon as possible replace your disk.
For this, you should first create and copy your DOS partition manually on
the new disk and then start your server and use NSSMU.NLM to manage the
mirroring of the NetWare partition(s).
Marcel Cox (using XanaNews 1.18.1.6)

Auto restart, resetting

Similar Messages

Maybe you are looking for