Auto-rotate D4S files and sharpening

Two questions: Bridge CC does not auto rotate my D4S files on import. It does rotate my D300s files. I have updated and installed the latest camera raw plug in.
Second issue I have sharpening applied to preview images only in preferences. Sharpening is only applied when image is opened in ACR not in the bridge preview window?

Bridge CC does not auto rotate my D4S files on import. It does rotate my D300s files.
This is not an auto feature of Bridge but has to be set to on in the camera software, check your D4s manual for this, it should provide you with several options. The camera writes metadata to the file, Bridge reads this and applies the rotation from the info of the metadata
Second issue I have sharpening applied to preview images only in preferences. Sharpening is only applied when image is opened in ACR not in the bridge preview window?
It should be the other way round, by default it is a reasonable subtle setting and very useful to judge the previews better for sharpness. There are tons of books written about sharpening but personally I only apply sharpness at the end of the process, I certainly would not use ACR sharpness settings at the start of processing the file in PS.
If your camera has been set to auto rotate and your sharpness at preview only is double checked to be set to on then it might be needed to reset your Bridge preferences. Restart Bridge holding down option key (Mac) or ctrl (win) and choose reset preferences and try again.

Similar Messages

HT2488 Hot to auto-rotate movie files

Hello, I have a relatively simple operation that I can't seem to figure out using automator: I want to create a droplet that rotates any movie files selected by 180 degrees. I can do this manually using QuickTime 7, not QT X, but it's tedious for multiple files.
Manually, I open the movie file (a ProRes clip) in QT7, hit command J to open movie properties.
Select 'Video Track'
Select 'Visual Settings' tab.
Click on the rotate 90 degrees button (either rounded arrow) twice.
Then save, exit and repeat.
Is this possible to do in automator? I've looked into other auto-rotating programs, but they all involve re-rendering and way too much time and diskspace for what is a very simple operation in QT7.
Any thoughts on the matter are greatly appreciated.
Thank you,
Josh

Paste this into AppleScript Editor, save it as an Application, drop some movies on it.
on open theFiles
    try
        repeat with afile in theFiles
            tell application "QuickTime Player 7"
                open afile
                rotate document 1's track "Video Track" by 180
                close document 1 with saving
            end tell
        end repeat
    on error errMsg number errNum
        display alert errMsg & return & return & "Error number" & errNum buttons "Cancel"
    end try
end open

How come auto-rotate sometimes works, and then stops working until i reboot?

I am going to be as specific as possible simply because some people seem to have similar problems, but mostly they just can't get it to rotate. I have a 6, and for whatever reason it is finicky with auto rotating after going into an app. Say i am in messages in portrait mode and i exit in portrait mode. When i go back in in landscape mode it won't rotate without me first putting the phone into portrait, allowing the gyro (or whatever controls this) to reset, and then rotating it back to landscape. However, if i reboot the phone, it will work without issue for a short while, automatically detecting which mode it's in and adjusting itself accordingly, until it stops working again. This happens with most pre-installed apps like Messages, Safari, and Mail. Any help would be appreciated. I also get freeze ups from time to time while typing, where the screen isn't responsive at all after switching modes, so i have to rotate, and then back again to get the keyboard to accept entries.

The issue turned out to be the mouse. It was somehow shorting the USB ports. I tried a different mouse from restart rather than only after the problem began.

Auto Rotate CR2 files

Is there anyway to set LR to AUTO rotate CR2 Raw files?
I can do it manually in the library but it's time consuming with large libraries.
Thanks!

Bill,
No, camera doesn't rotate image. Camera just set proper tag inside image file, which tells software on your PC, how image should be rotated on your PC.
Bogdan

Print Module: Auto-Rotate to fit and Photo Info Text

When in the print module with "Auto-Rotate to fit" selected, A landscape images correctly rotates to fit the page, but the text that is selected in the "Photo Info" setting does not rotate. Thus, the text appears along the left side of the image .
Any suggestions to get it to appear correctly on the bottom?
Also, Font size is selectable but not font type.

What OS?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

FileHandler: persistant files and no rotation

I'm currently working on implementing user action logging for a server. We have until now been using the FileHandler component in order to output to rotating log files, and it has worked to satisfaction.
However, when handling user events, the requirements are a little different, and they create two problems:
1. They still want to break up log files at a certain size limit, but we must never delete any of the old log files.
2. Is caused by the first problem. If we keep on enumerating the log file-names as they are enumerated now (insert first; 0 = newest), a lot of overhead will be spent on renaming the old files if the application has been running for long and generated a large number of log files. Ergo, we would have to start enumerating these file-names in an insert last manner (0 = oldest).
My goal here is to keep using the java FileHandler, to decrease production time. Is there any way to configure it to work in the manner I want? Or is my best bet to extend/construct my own?

I'm currently working on implementing user action logging for a server. We have until now been using the FileHandler component in order to output to rotating log files, and it has worked to satisfaction.
However, when handling user events, the requirements are a little different, and they create two problems:
1. They still want to break up log files at a certain size limit, but we must never delete any of the old log files.
2. Is caused by the first problem. If we keep on enumerating the log file-names as they are enumerated now (insert first; 0 = newest), a lot of overhead will be spent on renaming the old files if the application has been running for long and generated a large number of log files. Ergo, we would have to start enumerating these file-names in an insert last manner (0 = oldest).
My goal here is to keep using the java FileHandler, to decrease production time. Is there any way to configure it to work in the manner I want? Or is my best bet to extend/construct my own?

Auto-rotate images on import, AP 2.0

Since I upgraded to version 2.0 images are no longer auto-rotated on import and I can find no way of switching this function on. It worked fine with all previous versions. I am importing RAW files directly from my D200. Anyone else having this problem?
Andy.

Same here. My KM 7D files used to rotate on import with v1.5.x, but not with v2. I hope this is just a temporary glitch because I REALLY liked that feature. Picking through 400 thumbnails to rotate the images before importing is a pain.
(Just a tip: Until Apple fixes this issue, it's best to rotate your photos while still in the import screen. Aperture hasn't yet begun to create previews or thumbnails for these images and it will save a little time if your computer can start creating these things with the correct orientation from the beginning.
If you wait until after you've imported the photos, Aperture has already begun processing and you'll have to fight for CPU time while you sort through the images looking for shots to rotate.)

Auto Rotate problems when shooting tethered overhead

I am shooting with a Canon 5d mark 2. When I shoot product into the auto rotate works properly and the image appears rotated properly. Although when I shoot overhead or down on product it seems to get confused. If I rotate the camera twords the horizon and fire it figures out which way it should be the I can reframe my overhead shot. But if the camera is moved at all it will show up rotated the wrong way and I have to slightly move the camera away from its directly overhead framing again so it can figure out wich way it should be rotating. I have tried all three rotate modes with the camera with similar inconsitant results. What is the best setting on the camera to get consistant results. Or ii I turn auto rotate off is there a way to tell lightrroom to rotate it properly on import like it does for all other settings like white balance.

This isn't a function of tethering, I wouldn't think. Many cameras have a sensor that determines the orientation of images so auto-rotate works. The problem is that these sensors generally only work along one axis, using the force of gravity to tell them where down is. When you orient the camera such that the lens is pointing down most sensors no longer are able to determine whether you are in portrait or landscape, because there is no down -- it ends up being somewhat random.
I've seen this on many different cameras, and all without tethering. It has to do when the sensor is read when composing the short.
Your best bet is to set the camera to ignore the sensor when taking pics like this, and rotate the image by hand that are need to be in portrait. If there is no rotation in the image metadata, Lr will not rotate it. It will have to be done by hand. It won't be that hard to select a number of images and bulk rotate them.

Auto Rotate Nikon .nef files

Hello everyone,
I found this topic (archived) ... I would like to re-open the issue.
"Topic : Auto-rotate images on import, AP 2.0"
The topic, closed with people saying that it worked if you plugged the camera to the computer.
It still doesnt seem to solve the issue if we use a normal USB Card Reader for the SD Cards.
I have a Nikon D80 ... and I put the cards in a Card Reader (its easier to have the card reader, than the usb cable around !).
Auto Rotate of the .Nef files, does not work. No Exif info either.
Any ideas ?
Regards

Look -- this is simple: Camera RAW 2.3 broke Auto-Rotation and recognition of duplicates if images remain on a card after previously capturing them. This has been confirmed and a bug report filed by a number of people. Shortly we should expect a new camera RAW update. CRAW 2.3 also impacted iPhoto in similar ways.
I have not found any EXIF data to be missing.
In the meantime I have found it only a minor inconvenience, and continue to use Aperture 2.1.2 to good advantage.
Ernie
Message was edited by: Ernie Stamper

Since my last software update the auto rotation on both my ipad air and my iphone 5c won't work. I have tried everything, including; checking the auto-lock - it isn't on lock. I've checked the settings in the Control Centre and they're as they should be.

Since my last update the auto rotation on both my ipad & my iphone has stopped working. I've done all the usual stuff to correct it but no joy. I've reset, rebooted, turned off then back on, checked all settings including those for the side switch and everything is as it should be except the rotation still doesn't work. There are no open apps, movies or videos that could be locking the screen so I am now totally stumped.
Any suggestions please?

The fact that gs.apple.com was in your host file to begin with is an indicator that your computer was used to jailbreak or hack an iOS device at some point in the past. You can not get help here for a hacked or jailbroken device. If your phone was hacked or jailbroken, Apple won't touch it.
RecBoot and Tinyumbrella are hacking tools.
Google "iPhone DFU mode".
Try restoring in DFU mode. If that doesn't fix it, make an appointment at the genius bar and see what Apple has to say about it.

IPhone: Where to find good Documentation and Samples for Auto-Rotate?

So I'm starting to get into the auto rotation features for my iPhone apps. I've spent a couple hours looking for some apple documentation and searching online, but I'm not finding any "definitive" guide to discuss the process. Any recommendations would be great!
Specifically, I'm trying to learn about the following:
- I have already implemented auto-rotation, but how do I setup my view so when rotated, it adjust the UI to take advantage of landscape mode. (i.e. I want to add extra features, and re-position some things)
- I also would like to the option within a couple views, that when rotated, goes to an entirely new view.
Thanks in advance!

I generally find that vector drawing programs are better for drawing toolbar icons and the like, as vector drawings are easier to tweak and adjust later. I've had great success with VectorDesigner in my own apps; it has a shallow learning curve and a solid basic feature set, although it can be quirky at times. (It also doesn't play all that well with certain development tools: don't try to add VectorDesigner files to Xcode projects, and make sure you zip them before you add them to a Subversion or CVS repository. VectorDesigner files are packages--like application bundles--and those tools don't play well with packages.)
If you want to go a little higher end, Illustrator is the Photoshop of vector drawing, but like Photoshop you'll probably find it very difficult to start out with.
You'll also need a raster graphics editor to tweak exported images. I use Pixelmator for this, but Photoshop will work just as well.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Yoga 8 and 10 Tablets - KitKat 4.4.2 - Auto-Rotation

After upgrading to KitKat 4.4.2, some customers report auto-rotation does not always occur while changing modes on their Yoga 10 tablet (B8000-F/H). Reports include the Lenovo Launcher home page, Facebook, and SolMail. Hard resets do not resolve the issue.
Please note that Lenovo has escalated internally on this issue. I was able to reproduce these reports on a KitKat 4.4.2 V24 build. I noticed slow auto-rotate and I quickly developed a habit of automatically "shaking" the device one time when changing the mode to force the auto-rotation.
These reports originated from this thread: http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
Note: This has only been reported by Yoga 10 Tablet users. If this is occuring on your Yoga 8 Tablet, please let me know so I can escalate it for the Yoga 8.
Thanks to YannisK for the pics.
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
Attachments:
Yoga 10 KitKat 4.4.2 AutoRotation1 YannisK.jpg ‏310 KB

My Yoga 2 10" came with KitKat 4.4.2 out of the box but stopped rotating within a week, Any explanation Lenovo? Fortunately under warranty so will go back soon for money back.
Amy_Lenovo wrote:
After upgrading to KitKat 4.4.2, some customers report auto-rotation does not always occur while changing modes on their Yoga 10 tablet (B8000-F/H). Reports include the Lenovo Launcher home page, Facebook, and SolMail. Hard resets do not resolve the issue.
Please note that Lenovo has escalated internally on this issue. I was able to reproduce these reports on a KitKat 4.4.2 V24 build. I noticed slow auto-rotate and I quickly developed a habit of automatically "shaking" the device one time when changing the mode to force the auto-rotation.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Auto-rotate D4S files and sharpening

Similar Messages

Maybe you are looking for