Auto rotate... doesnt...

Hi all,
My nano 8gb doesnt auto rotate any more. Have tried the following:
Toggle on/off cover flow.
Toggle on/off cover flow then reset.
Full restore, and sync new songs - only about 20 to trial
All have failed to work.
Does this need to visit the Apple hospital? This may complicate matters.. I bought this nano from a shop as a second user.. however as its release date was Sept 08 can I get apple to still honour the warranty.
Answers on either would be appreciated
Thanks
Pete

Hi,
I had my N79 for 2 months now and have recently eperienced the same problem with the camera not comeing on when opening the lens cover or when pressing the shutter button. Haven´t had the problems of 1) and 2) though. Have you found a solution to the problem the camera problem, or have you just decided to buy some other model?
cheers

Similar Messages

  • Screen rotation doesnt work after upgrading to lolipop

    After upgrading my phone to lolipop the auto rotation doesnt work even in the safe mode

    @alahmed
    Repair your phone with PCC and report back
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Auto Rotate Nikon .nef files

    Hello everyone,
    I found this topic (archived) ... I would like to re-open the issue.
    "Topic : Auto-rotate images on import, AP 2.0"
    The topic, closed with people saying that it worked if you plugged the camera to the computer.
    It still doesnt seem to solve the issue if we use a normal USB Card Reader for the SD Cards.
    I have a Nikon D80 ... and I put the cards in a Card Reader (its easier to have the card reader, than the usb cable around !).
    Auto Rotate of the .Nef files, does not work. No Exif info either.
    Any ideas ?
    Regards

    Look -- this is simple: Camera RAW 2.3 broke Auto-Rotation and recognition of duplicates if images remain on a card after previously capturing them. This has been confirmed and a bug report filed by a number of people. Shortly we should expect a new camera RAW update. CRAW 2.3 also impacted iPhoto in similar ways.
    I have not found any EXIF data to be missing.
    In the meantime I have found it only a minor inconvenience, and continue to use Aperture 2.1.2 to good advantage.
    Ernie
    Message was edited by: Ernie Stamper

  • Elitepad 900 windows 8.1 auto-rotate screen disappear

    after installing all drivers from "downloads" page of your support aouto-rotate is disappear. 
    screen do not rotate while iam physically rotate device, also "lock auto-rotate" button do nothing and button of locking rotate missing in brightness in right settings panel.
    full reset doesnt help, how turn auto rotate  on?

    Hello romka18.
    I am sorry you are having trouble with the auto-rotate.
    To turn on auto-rotate, bring up the charms by swiping from the right hand side and search on "resolution". You may need to select that you are searching within "Settings" and not "Apps".  One of the settings for resolution is "Adjust Screen resolution", please select that and it will take you to a screen that has a checkbox that lets you enable "Allow the screen to auto-rotate".
    There is a good 2 minute video of this on YouTube at: http://www.youtube.com/watch?v=OtiuFLyoGoA uploaded there by Jeffrey Lush.
    I hope that helps!
    I am an HP Employee

  • Hp envy x2 13 j002dx auto rotate not working Windows 10

    since i upgraded to windows 10 the auto rotate will not work. ive reinstalled drivers. ive reset the laptop and re installed windows 10 but it still wont work. i can turn on and off the auto rotate but it doesnt do anything

    Hi shyndm01
    I just fixed the problem on my device. You need to run windows update, there are about 3 updates for Windows 10. Once install just restart and auto rotation will work again.
    Hope this work for you!

  • Yoga 2 Pro tent mode and auto-rotate not working

    I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
    When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
    Auto-rotate does not work at all now. The screen is un-locked.

    Dear NX3
    Welcome to Lenovo forums
    Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
    http://support.lenovo.com/us/en/downloads/ds038767
    Thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Yoga 8 and 10 Tablets - KitKat 4.4.2 - Auto-Rotation

    After upgrading to KitKat 4.4.2, some customers report auto-rotation does not always occur while changing modes on their Yoga 10 tablet (B8000-F/H). Reports include the Lenovo Launcher home page, Facebook, and SolMail. Hard resets do not resolve the issue. 
    Please note that Lenovo has escalated internally on this issue. I was able to reproduce these reports on a KitKat 4.4.2 V24 build. I noticed slow auto-rotate and I quickly developed a habit of automatically "shaking" the device one time when changing the mode to force the auto-rotation.
    These reports originated from this thread: http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
    Note: This has only been reported by Yoga 10 Tablet users. If this is occuring on your Yoga 8 Tablet, please let me know so I can escalate it for the Yoga 8.
    Thanks to YannisK for the pics.
    Amy Tupper
    Technical Resolution Lead, Pervasive Issues
    Lenovo US
    ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
    First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
    Attachments:
    Yoga 10 KitKat 4.4.2 AutoRotation1 YannisK.jpg ‏310 KB

    My Yoga 2 10" came with KitKat 4.4.2 out of the box but stopped rotating within a week, Any explanation Lenovo? Fortunately under warranty so will go back soon for money back.
    Amy_Lenovo wrote:
    After upgrading to KitKat 4.4.2, some customers report auto-rotation does not always occur while changing modes on their Yoga 10 tablet (B8000-F/H). Reports include the Lenovo Launcher home page, Facebook, and SolMail. Hard resets do not resolve the issue. 
    Please note that Lenovo has escalated internally on this issue. I was able to reproduce these reports on a KitKat 4.4.2 V24 build. I noticed slow auto-rotate and I quickly developed a habit of automatically "shaking" the device one time when changing the mode to force the auto-rotation.

  • Print Module: Auto-Rotate to fit and Photo Info Text

    When in the print module with "Auto-Rotate to fit" selected, A landscape images correctly rotates to fit the page, but the text that is selected in the "Photo Info" setting does not rotate. Thus, the text appears along the left side of the image .
    Any suggestions to get it to appear correctly on the bottom?
    Also, Font size is selectable but not font type.

    What OS?
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Our HP laserjet , model P2050 , does not print on both sides even though the " auto rotate " box is

    checked.  Is there someway to cause the printer to print on both sides?  ( There is another printer box that  comes up in other  instances and it has a "Preferance" box which , when clicked on, gives a different way to choose  two-sided printing, and that one works to cause the printer to do as wanted.)
    The  box that shows " auto rotate' doesn't have a print preview.

    Hi @prdstudio3 ,
    Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • Auto rotation is not working properly with iOS 7.1.2 upgrade

    I recently upgraded my iPad to iOS 7.1.2 and noticed that auto rotation isn't functioning properly. How will this problem fix, will I have to wait till the next update ??
    It takes too much time, or doesn't happen at all.
    I have an iPad mini with retina display, 128GB storage.
    Thanking you in anticipation .

    Try a reset and see if it fixes the problem. You will not lose any data.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Auto-rotate is not working in my Nokia X6. Please ...

    Hi. So I recently bought a Nokia X6, and everything seemed to work fine. However, just today the auto-rotate stopped working on my phone. I turned the sensors off and then turned them on again and it stopped working. What could be the reason?
    Also, now when I turn my phone on, it just turns off again, and I need to turn it on again.
    P.S: I don't know if this has an effect, but I was installing an app on my phone, when the battery went empty, and the phone turned off in the middle of the installation...
    EDIT: Also, my phone gave me a "System error" message twice...

    It's ok, I did a hard reset and everything is working fine now. I guess the problem was with the app that I installed. By the way, that app wasn't compatible with the phone, as the phone gave me a message that it isn't, and yet I insisted on installing it. So perhaps here lies the problem.

  • [FIX] Yoga 13 auto-rotat​es to portrait on startup after Win 8.1 upgrade

    This was going to be a question post but I just stumbled across the answer on my own, so here's the solution instead!
    After upgrading the Yoga 13 to Windows 8.1 through the Windows Store app, and even after installing all the new drivers, I found that every time I restarted when the lock screen came up it would suddenly rotate 90 degrees left to portrait mode. It would fix itself if I rotated the laptop or hit the hardware button to turn auto-rotate off and on again, but still kinda annoying.
    So here's the fix:
    -Seach for "local services" and open it up
    -Scroll down to "Sensor Monitoring Service"
     and double-click
    -Mine had its startup type set to manual, change this to automatic
    -Restart the computer
    Note:
    My Yoga was running a clean install of Windows 8 when I upgraded to 8.1, so I'm not sure if this applies to a Yoga with the factory install intact (or if it even gets this problem with the factory install, since I don't see any other posts about people having this problem).
    Solved!
    Go to Solution.

    With a factory configuration the serivce is set to Manual, Trigger Start, and this config seems to work well...

  • 8.1 | 11s | Auto-rotate only works for landscape & button does nothing

    The way auto-rotate is sort of doing it's own thing right now. The way it works is if  the screen is upside down (winbutton up) -> tablet mode, rightside up -> laptop mode. Those are the only two switches that it makes, and it doesn't rotate to a portrait mode, which I would really like.
    The auto-rotate button doesn't seem to do anything anymore. The dialog will appear on-screen but it rotates the same wether it's on or off. 
    I can make the switch with ctrl+alt+<,> but that doesn't disable the keyboard, and it flips back to landscape when I move it. 
    Is there some list of upgrade issues?
    Other issues I have/had are: cpu throtling in tablet mode, dolby stopped working though audio works fine with new driver. Also the upgrade messed up my DNS settings. Updating the wifi driver & forgetting the network driver didn't solve it. I had to go to the conection's settings and set the DNS manually on IPV4 and disable IPV6. 

    http://support.lenovo.com/en_US/downloads/default.page
    Check for newer drivers and install if any, then post if you still have the issue.
    Jonas
    Microsoft MVP: Windows Consumer Expert
    Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
    Twitter: @jonashendrickx

  • N95 & Auto-Rotate Function in V21.0.016

    Wife & I both have new N95's RM-159 from 3.
    Firmware Version is V21.0.016 as mentioned in subject line.
    What neither phone seems to have is the auto-rotate function. After hours of searcing I've been unbale to find out why with this version of the firmware this isn't supported on these phones. Under Display settings no mention of auto-rotate. I've checked software updater & am told the FW is the latest revision.
    Do I need to install the accelerometer plugin to get this function to work as you have to do with rotateMe(c)Samir?
    Any help would be appreciated before I ring 3 customer services and ask them why it isn't supported.
    TIA.

    Your phones are normal.
    The N95 doesn't have that function as part of it's firmware. Only the N95 8GB has had this feature added in the v20 firmware.
    The firmware on the N95 is not the same as the firmware on the N95 8GB.
    It is rumoured that the feature will be in the next firmware release for the N95 which is due in the next few months.
    So the only way to get auto rotate on the old N95 is to install a program like rotateme.

  • Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?

    Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
    I have experienced this on iPad 1 as well as iPad 2.
    Basically, when you set the side switch to toggle screen orientation (or mute), after a period of use I will have either my sound cease to function or the ipad screen will not orient correctly.  This depends on what i have chosen the side switch to toggle.  I am not sure what causes it.  The time it takes for the problem to appear is inconsistent. Some say it is caused by third party applications.
    One can find numerous threads on here if you search for "sound on my ipad stopped working" or "orientation not working".  It appears to be the same problem. Fudging with the toggle switch settings can fix it (but it takes a weird order to get it out of its non functioning loop). 
    Here is a thread that addresses the sound issue:  https://discussions.apple.com/message/15263298#15263298

    Its only for notifications.. it is not for sound from videos or music!

Maybe you are looking for

  • Checkin in Physical and Physical/Electronic checkin profiles through commiting of documents from ODC to URM/WCC

    Hi, While trying to commit document from ODC to URM, it asks for category id /folder id for commiting. Is URM importing the document here through Standard Checkin profile? Can we checkin document in URM through Physical profile and Physical/Electroni

  • F-37 Error

    Hi, when i try to post customer rebate on F-37 i get the following error. "No special G/L account defined for acct type D sp. G/L ind. A recon. account XXXXXX" Kindly advice Thanks, AP

  • Quicktime Broadcaster and baseline H.264/AVC

    Is there any way to force QT Broadcaster to encode to baseline profile when encoding H.264? PowerMac G4   Mac OS X (10.4.7)  

  • Parametric view

    Are there any way how to create parametric view? Or will be it in the future versions? Anything as create view v_test (col1,:col_par) as select col1 from test where col2=:col_par and use it as select * from v_test(par) This is very simple view, but f

  • HT6055 Request to Apple: restore support for older codecs

    I used Quicktime extensively for my research before upgrading to Mavericks, and now that these older codecs have been removed, none of my experimental videos taken over the past 5 years will play in Quicktime. This is extremely disappointing. I'd lik