Auto-rotate is not working in my Nokia X6. Please ...

Hi. So I recently bought a Nokia X6, and everything seemed to work fine. However, just today the auto-rotate stopped working on my phone. I turned the sensors off and then turned them on again and it stopped working. What could be the reason?
Also, now when I turn my phone on, it just turns off again, and I need to turn it on again.
P.S: I don't know if this has an effect, but I was installing an app on my phone, when the battery went empty, and the phone turned off in the middle of the installation...
EDIT: Also, my phone gave me a "System error" message twice...

It's ok, I did a hard reset and everything is working fine now. I guess the problem was with the app that I installed. By the way, that app wasn't compatible with the phone, as the phone gave me a message that it isn't, and yet I insisted on installing it. So perhaps here lies the problem.

Similar Messages

Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

I have installed the latest HP Support Assistant for windows 10 and I have installed the updates Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings I have checked the box of "Allow the screen to auto-rotate" In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424) In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them In User Account I have created a new user with password. Auto-rotate did not work in that user But all these have not worked. Please find a solution for me. About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work

Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

Blackberry Torch 9810 auto-rotating not working !

Hello guys my friend just bought a Blackberry Torch 9810 few weeks ago , only two weeks I think.
And yesterday she found out that the auto-rotating doesn't work - that is the first time she tried to rotate the phone because she want to stream a video.
Hard or Soft reset has been done , reboot has been done , sliders not open , no rotation lock apps has been installed.
Is this the sensor problem ? I mean , the phone is like brand new and just bought two weeks and the sensor got problem so fast ?
If anyone knows that exact and working solution please help ~
Thank you.

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
Nainai wrote:
Is this the sensor problem ? I mean , the phone is like brand new and just bought two weeks and the sensor got problem so fast ?
It could be...any device designed, built, and operated by humans is subject to a defect rate greater than zero. But, at an internet distance, it is of course impossible to provide an actual diagnosis, especially if the problem indeed is hardware. Only in hand evaluation by a qualified technician can truly diagnose a hardware problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Thinkpad Helix - Screen auto rotation does not work (Issue 3/3)

Hi,
I have installed a clean Windows 8.1 on the Helix and have several issues. Putting them into several threads so they can be answered independently.
The first thing I did after installing the system (and critical Windows Updates) was running the Lenovo System Update tool and downloading everything.
Screen rotation does not work. In “Device Manager” I can see “C5621 gw Mobile Broadband Geolocation Sensor” and “Hid Sensor Collection”. The HID one has an exclamation mark next to it. Are there some drivers I need to download to make this work. I did of course check if screen rotation is not locked – it is not (I did turn it on/off a couple of times, without any effect). Manual rotation (using display settings) works fine.
Thank you in advance for any help,
Łukasz
Solved!
Go to Solution.

Hi Lukasz,
Try, in device manager, right click on HID Sensor Collection then uninstall. Reboot, and see if the driver is loaded properly, if not click on scan for hardware changes.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Auto rotate does not work

The auto rotate function does not work on my iPad. I have tried the the mute / rotate switch, swiping to the far left at the bottom of the home page and rebooting. Nothing is working. Are there any other steps I could try or should I be taking the iPad in for service?

Does your iPad show the lock in a circular arrow symbol in the top of the screen next to the battery level?
First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Auto rotation is not working properly with iOS 7.1.2 upgrade

I recently upgraded my iPad to iOS 7.1.2 and noticed that auto rotation isn't functioning properly. How will this problem fix, will I have to wait till the next update ??
It takes too much time, or doesn't happen at all.
I have an iPad mini with retina display, 128GB storage.
Thanking you in anticipation .

Try a reset and see if it fixes the problem. You will not lose any data.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Auto rotation is not working anymore on my iPhone 5s

Today i woke up and grab my iphone to see if i get any new messages... so i opened my mail app and i turn it landscape mode the iphone screen doesn rotate at alll... and after a while it rotate itself... realy weird situation... I have installed the update 7.0.4 on my iphone... do anyone have this issue also..?
Kind regards
Stevo

Hello Stevodevivo,
Thank you for the details of the issue you are experiencing with your screen not rotating on your iPhone. I recommend following the steps in the article below for the issue you described:
iOS: Screen does not rotate
http://support.apple.com/kb/ts3805
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iphone 4 photo auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. Please advise how to unlock it.

My iphone 4 photo/message auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. This function was working perfectly since day 1.
Please advise how to unlock it.

Swipe upwards from the bottom of the screen to open Control Center. You will then find the orientation lock in the top row, last icon on the right. White is on, black is off. Tap and turn it off. If you see the lock symbol, then orientation lock is on, and that is what is keeping it in the portrait mode.

Auto-Deployment is not working in Eclipse - Weblogic

I have created weblogic server instance in Eclipse.Then, I have added one project into weblogic server by using "Add/Remove Projects" menu.After I start the server , I logged into admin console and checked the deployments link. I am not finding the project listed in the list.I have selected option "Run stand alone web module directly from work space" in web logic server configuration window in eclipse.
I am using Eclipse 3.3 and weblogic 10.0.
I have no idea, why auto-deployment is not working.
I would appreciate your help on this regard.I have contacted Eclipse Support, they have asked me to contact BEA team.
Thanks,
Prakash.A

Hi Prakash,
The "Run standalone web module from workspace" doesn't publish the application to the server (instead the app is deployed to a temp location).
This is mainly to help test the app during the development stages. If your app is complete and would like to publish to the server then you might want to try the following option
- In Server View, double click on the configuration to launch Overview
- Select "Copy stand-alone web module into separate deployment folder"
- Save the configuration
- Start the server
The application would be deployed to the server as a WAR file.

What's going on with ios8... Screen rotate does not work anymore, wifi doesn't work very well anymore and apps are crashing or running slow... Come on Apple sort this mess out

ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
first the the screen rotation is not working... Checked the settings and lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly.... come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......

Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily.

Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5?

Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5? My iMatch is turned on and I can direct downlad my music to the iPhone from the Cloud; however, I want to direct import All of my music from iTunes to my iPhone 5 via the connecting USB cable and it is not working. Yes, I have tried restarting both devices, and no autosync is not working nor is is it providing the avaialbile option to select music in iTunes on my Mac to then sync. Please help. Thanks

Please disregard. I figured it out. Answer for anyone else running into this problem: You have to turn off iTunes Match on both devices. Apparently, if you activate iTunes Match it deactivates your abiltiy to direct sync.

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

Additional testing i perform to make wifi work but nothing works out:
i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
wifi was working with older software versions. i think there should be a problem with 8.1.1.
is anyone has fix for this issue?

Upgraded to 8.3, now auto fill is not working. I have checked, rechecked my info, saved passwords, etc. to no avail. Is this bug in 8.3. Never did this until I upgraded.

Upgraded IPad to to 8.3, now auto fill is not working. I have checked, rechecked "my info", "saved passwords", etc. to no avail. Is this bug in 8.3. Never did this until I upgraded. Wife is not happy I upgraded!

Auto fill works for me in iOS 8.3.
Try the standard troubleshooting steps in this order:
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
See here for more details on restore: https://support.apple.com/en-us/HT201252
If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

Youtube video is not working in my nokia c6

hello sir..!
online youtube video is not working in my nokia c6. It only shows the flash symbol only. How can i solve this problem. Please say the solution for this.

Hi prasu7,
Thanks for your post.
Have you tried opening the videos from the YouTube application too?
Is your device updated to the lastest version? If yes, I advise you to reinstall the software. You may update and reinstall device's software from the updates tab in Nokia Suite.
Let us know how you get on and feel free to post any other questions you may have.
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

My Auto-Brightness is not working on my iPhone5

My IPhone5 auto-brightness is not working I don't know if it is a bug or what please help. Thank You

Destinie Harris wrote:
sberman wrote:
Resetting may help. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
You only want to do this if your iPhone won't turn on or off and is completely frozen. Instead, try Resetting all settings in Settings > General > Reset > Reset all Settings
I completely disagree. Reset All Settings (your suggestion) would reset the OP's preferences and settings. By contrast, resetting the iPhone (as I suggest) changes no preferences, settings, or any other data. It simply starts the iPhone over, with no data loss.

Auto-rotate is not working in my Nokia X6. Please ...

Similar Messages

Maybe you are looking for