Auto-Rotate not working correctly after 8.1.1 update

Updated my iPhone 5s to 8.1.1 last night. Auto-Rotate will rotate to the side but will not rotate back now.
Surely this is not by design??

It may be an app that is doing it. If its fine after a reset and then does it at some point, keep track of what apps you are running. There was an app that would always lock my ipad2. I don't recall now which one. Somewhere along the line it must have got patched.
The only problem I'm having with the air is that the split keyboard comes up very crudely compared to ios7. A full gray rectangle is drawn and then the center disappears. It looks very ameturish.
I am having some Safari issues on my phone. Not sure if it's an iOS8 thing yet or not.

Similar Messages

Auto Rotation not working correctly Radius p55w B5112

It has not worked correctly since I bought it. I have recovered from image fresh again, and then went through and hit windows update and updated 134 updates. Auto rotate does not work in tablet or in presentation mode. The keyboard never shuts off and I can type in tablet mode. If I have this on my lap, the buttons are pressed. I have a lock on my screen rotation, it is greyed out and I cannot access it. Any other suggestions to fix this?? Everthing else works great!

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

TS1702 google calendar not working correctly after 8.0.2 update

IPAD screen inconsistant with finger comands, lags, calender events jump all over the place when begininng to enter event. minutes on the left of the page have ?? question marks, no + to add events. Also, I dont always have a volume icon when adjusting the volume. You can hear the sound going softer and louder but no indicator.
Ive shut device off, taken the calendar off the ipad and put it back on, (that fixed the ?? on the time side), cleaned the screen, turned gesture on and off. I book appoitments on this device and have been really frustrated since this update.

I have the same problem with Sprint LTE. It works fine when I'm on WiFi at work then I went out to lunch with my family and tried to show them a video and it wouldn't load. I thought it might just be YouTube but then I tried sending an iMessage to my brother and it wouldn't send until I got back onto WiFi at work. It didn't do this before I updated 8.0.2 but I'm still not sure if it's the iPhone update or just Sprint's network today.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

HT5271 auto fill not working correctly

Auto fill is not working correctly. How can this be fixed?

Leopard 10.6.8 is Snow Leopard.
Do this please ...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
What version does it say?
10.6 10.5 ??

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Screen locking up and auto rotation not working on phone wakeup

Since updating to iOS8 my iPhone 5 and 5s will lock up when waking the phone. I also have noticed that the screen rotation does not work riight away and is sluggish. Certain apps tend to freeze which could be that they need an update themselves. It is a shame that Apple has resorted to using its customers as beta testers for their software. As a die hard Apple fan it is getting harder to stay true to the company. Apple should be leading not playing catch up which is why I think theses major software issues develop.

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

Hp envy x2 13 j002dx auto rotate not working Windows 10

since i upgraded to windows 10 the auto rotate will not work. ive reinstalled drivers. ive reset the laptop and re installed windows 10 but it still wont work. i can turn on and off the auto rotate but it doesnt do anything

Hi shyndm01
I just fixed the problem on my device. You need to run windows update, there are about 3 updates for Windows 10. Once install just restart and auto rotation will work again.
Hope this work for you!

Spry tab not working correctly after custom changes

Hi,
i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
http://khurram.visbl.com/test.zip
please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution
Best - Khurram

Sorry to disappoint, the structure of the tabbed panels is
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
    <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
    <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
</ul>
<div class="TabbedPanelsContentGroup">
    <div class="TabbedPanelsContent">Content 1</div>
    <div class="TabbedPanelsContent">Content 2</div>
</div>
</div>
As soon as you change that structure, this widget (out-of-the-box) will not work.
Gramps

My mouse is not working correctly after upgrade to ITunes 11

I upgraded to iTunes 11 for WinXP and now my mouse is not working correctly. No double clicks, no right button function and sometimes refuses to do simple left click options. What can I do?
I've tried new mouse drivers and checking the settings in Control Panel but no joy so far.
Driving me mad and taking me three times longer to do anything as I look for keyboard solutions.

I'm facing the same problem too on Windows 8. No mouse clicks (just 'ding' sound whenever trying to click anything).
I could work around it on Windows 8, but ultimately have to restart my PC to get back mouse functionality.
I wasn't quite sure which app is to blame, but ultimately concluded it's iTunes 11. As this behaviour always concided with having iTunes running in the background for 15-20 minutes (usually listening to podcasts) and never seems to happen when iTunes 11 isn't running.
Don't know what to make of this, I'm currently playing my podcasts through Windows Media Player instead. I'll hopefully try running iTunes 11 in Windows 7 Compatibiliy mode to see if that helps.

HT201365 my text to send messages is now not working correctly after upgrading

Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in

Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

Auto Rotation not working on ipad 2 after upgrading to ios 6.0.1

Hi
I just upgraded my ipad 2 to ios 6.0.1 . Auto Rotate is not working ..I have tried to reboot(Pressing home and sleep button together.. I also noticed that red striker not appearing while doing it )
Also I made sure Lock Rotation is off.
Please help me..
Thanks

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

Auto-Rotate not working correctly after 8.1.1 update

Similar Messages

Maybe you are looking for