Auto save didnt

I guess I dont understand "autosave" I was editing a very important job appication in preview it was a unlocked pdf. I deperatly wanted to save as I made changes to it. But i know I 2don't have to right? shouldn't the last version be saved. To make an already long story short. Lion locked up again. I had to force quit and the work I would have saved was gone. Is there some place to look? I tried time machine with no luck. Also when using word for mac 2011 it does not seem to auto save, does it. Lion is so slow and I am having to force quit and restart more than I have come to expect from apple. I think that they should return to features and return to rock solid OSX that made me a convert back in 2002.

Old ways wrote:
I deperatly wanted to save as I made changes to it. But i know I 2don't have to right? shouldn't the last version be saved.
Yes, it should.
Lion locked up again. I had to force quit and the work I would have saved was gone.
If the system freezes, it can't auto save. A freeze is a freeze.
Old ways wrote:
Lion is so slow and I am having to force quit and restart more than I have come to expect from apple.
Here is your real problem. Something is snarky with your system. Mine is rock solid, fast and have never frozen.
You need to find the cause.
There are some simple troubleshooting steps you can take.
Be sure you drive is not overly full. Rule of thumb would be over 85%.
(First, be sure you have a good backup, or create one now.)
Create a new User go to System Preferences > Users & Groups > "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
If the issue is limited to your user account try starting up in Safe Mode (It will take more time to startup because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test.
If the issue is systemwide then, you may be able to repair by booting cmd-r to your
Recovery Volume and re-installing Lion. This will be an "install in place" and shouldn't effect your data and settings.
if none of this helps make a clone of your system and then re-format your HDD and do a clean install, migrating back only your own data.

Similar Messages

Could not Auto-save your document ERROR

Greetings,
I am going through a nightmare at our school.
Keynote regularly brings the above error and I am stuck now, Reinstall of Iwork,File Server and disabling auto save didnt help.
This is the the log extract :
11/28/14 10:13:09.565 AM Keynote[1075]: *** Error: +[TSPFileManager linkOrCopyURL:decryptionKey:toURL:encryptionKey:] TSPFileManager.m:56 Couldn't copy file:///Volumes/Lower/.TemporaryItems/folders.502/TemporaryItems/(A%20Document% 20Being%20Saved%20By%20Keynote%208)/843BEF70-2229-41E5-8B55-6E92D539934A/st4-16. jpg to file:///Volumes/Lower/Grade%202/2G/Sophia/Tomatoes%20to%20Ketchup.key.sb-621df9 a2-SqBtVx/Tomatoes%20to%20Ketchup.key/Data/st4-282.jpg: Error Domain=NSCocoaErrorDomain Code=260 "The file “st4-16.jpg” couldn’t be opened because there is no such file." UserInfo=0x600000c7b900 {NSFilePath=/Volumes/Lower/.TemporaryItems/folders.502/TemporaryItems/(A Document Being Saved By Keynote 8)/843BEF70-2229-41E5-8B55-6E92D539934A/st4-16.jpg, NSUnderlyingError=0x600001251940 "The operation couldn’t be completed. No such file or directory"}
11/28/14 10:13:09.565 AM Keynote[1075]: *** Error: __100-[TSPPackageWriteCoordinator createPackageMetadataWritingDatasWithPackageWriter:saveOperationState:]_block_i nvoke_2 TSPPackageWriteCoordinator.mm:1403 Failed to write data: st4.jpg
11/28/14 10:15:55.815 AM Keynote[1075]: *** Error: +[TSPFileManager linkOrCopyURL:decryptionKey:toURL:encryptionKey:] TSPFileManager.m:56 Couldn't copy file:///Volumes/Lower/.TemporaryItems/folders.502/TemporaryItems/(A%20Document% 20Being%20Saved%20By%20Keynote%208)/843BEF70-2229-41E5-8B55-6E92D539934A/st4-16. jpg to file:///Volumes/Lower/Grade%202/2G/Sophia/Tomatoes%20to%20Ketchup.key.sb-621df9 a2-6DMdC1/Tomatoes%20to%20Ketchup.key/Data/st4-282.jpg: Error Domain=NSCocoaErrorDomain Code=260 "The file “st4-16.jpg” couldn’t be opened because there is no such file." UserInfo=0x6000016759c0 {NSFilePath=/Volumes/Lower/.TemporaryItems/folders.502/TemporaryItems/(A Document Being Saved By Keynote 8)/843BEF70-2229-41E5-8B55-6E92D539934A/st4-16.jpg, NSUnderlyingError=0x6000012518b0 "The operation couldn’t be completed. No such file or directory"}
11/28/14 10:15:55.815 AM Keynote[1075]: *** Error: __100-[TSPPackageWriteCoordinator createPackageMetadataWritingDatasWithPackageWriter:saveOperationState:]_block_i nvoke_2 TSPPackageWriteCoordinator.mm:1403 Failed to write data: st4.jpg
11/28/14 10:20:11.352 AM Console[1818]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
11/28/14 10:20:12.584 AM Keynote[1075]: *** Error: +[TSPFileManager linkOrCopyURL:decryptionKey:toURL:encryptionKey:] TSPFileManager.m:56 Couldn't copy file:///Volumes/Lower/.TemporaryItems/folders.502/TemporaryItems/(A%20Document% 20Being%20Saved%20By%20Keynote%208)/843BEF70-2229-41E5-8B55-6E92D539934A/st4-16. jpg to file:///Volumes/Lower/Grade%202/2G/Sophia/Tomatoes%20to%20Ketchup.key.sb-621df9 a2-pbIR2V/Tomatoes%20to%20Ketchup.key/Data/st4-282.jpg: Error Domain=NSCocoaErrorDomain Code=260 "The file “st4-16.jpg” couldn’t be opened because there is no such file." UserInfo=0x6000014702c0 {NSFilePath=/Volumes/Lower/.TemporaryItems/folders.502/TemporaryItems/(A Document Being Saved By Keynote 8)/843BEF70-2229-41E5-8B55-6E92D539934A/st4-16.jpg, NSUnderlyingError=0x600001a52e70 "The operation couldn’t be completed. No such file or directory"}
11/28/14 10:20:12.584 AM Keynote[1075]: *** Error: __100-[TSPPackageWriteCoordinator createPackageMetadataWritingDatasWithPackageWriter:saveOperationState:]_block_i nvoke_2 TSPPackageWriteCoordinator.mm:1403 Failed to write data: st4.jpg
Please advise...
Lower is AFP File server just mounted on all computers
Thanks
Huzz

Very well. Try this with your Mac:
Open "new.psd" in Preview
File > Save
new.psd becomes new.png If the extension was correct, Preview would not have changed it.
it now opens in Photoshop You can download it here. ("Save image As...)
Simply put, you had the wrong extension.

Auto-save in Logic 8

Hey Guys
I've been trying to find an option for auto-save in Logic (and to set how often it does this)... but I can't find anything...
Does it just do auto-save in the background? Or is there no auto-save feature?
It's easy to forget to keep saving in a long session and would be nice to know Logic does it for you!!
Cheers
Mike

I'm sure that Logic will never need auto save.
the reason is: Logic have a .crash save function...
it works great... (if you don't use 3rd party plugs with false Audio Units validation Pass.
I'm a Logic user from the Notator version...
Auto save is dangerous...
the only usefull thing should a Fix with save before Crashing happen
Auto save is not "intelligent solution"
*Logic 9 should be comes with an intelligent way to save function that works ONLY WHEN AND IF NEEDED*
I'm sure that Logic 8.1 will solve the .crash issue with 3rf party plugs that are intentionally developed with only AU version bugs.
this is another of the "milion" fermusic ideas about sh*t auto save dangerous and *really obsolete* function
No Auto save... *vote for an intelligent way to automatic save function*
(vote for fermusic )
Thanks... expacially focused to Bee Jay and Erik

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

How do I auto save all newly created contacts to a pre-determined group in Maverick? Could do this on iTunes, can't do it on iCloud...

Hi,
Before upgrading to Maverick, I used to sync all my contacts via iTunes.
iTunes used to have an option to "Add contacts created outside of groups on this iPhone to: (drop-down)".
I had created a group called ' RECENTLY ADDED ', so that every time I saved a new number whilst meeting people / networking, etc, it would auto-save to that group. I would then sync via iTunes, and voila- all my new contacts would be in there.
As a marketer, I allocate my contacts into various complicated groups... so from there, I would proceed to move each contact into their relevant group, and then 'delete' from group (not delete completely). I would repeat this step until all contacts were moved out, leaving an empty 'recently added' group.
The next time i was out networking/saving new numbers, the process would repeat...
Now that I have upraded to Maverick and using iCloud syncing, I cannot find this feature.
The previous method I used worked brilliantly, and I do not always have time to add notes, etc (for a smart group) when saving new numbers.
I'm struggling to find a solution now that I'm using the iCloud syncing service...
Any suggestions to make it easy??

If the information is in iTunes on the computer you have synced with in the past another sync, being sure you select the items you want on the iphone, should copy those things back to the iPhone.

HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
I tried to undo it but the app crashed.
I am hoping there's like a previously saved version of my file in iCloud somewhere.

No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

[OIM] Error in Direct Provisioning (with auto save form) - GTC DB App Table

Hi,
I am getting an error when setting up direct provision of a GTC DB App Conn using OIM access policy (and group membership) or through manual provisioning with prepopulate and auto save form.
Manual provisioning with prepopulate ONLY (not with auto save form) WORKS!!!
Some information about my OIM config:
- Prepopulate adapters are set up on both forms (parent and child)
- "Auto prepopulate" and "Auto save form" are set up at Process Definition
- For direct provisioning, I have created an access policy with an associated group which has a membership rule
What it is working:
- Provisioning manually, using prepopulate adapters only, not auto save form. Both tables are updated properly
- All *3 tasks are called and finished with status=Completed*: "System Validation", "Create User" and "Child Table UD_<connector child table name>_US row Inserted"
Testing direct provisioning:
- I have tested adding the resource manually with prepopulate and autosave form configured, and also through access policy/group membership. The error is the same on both tests
- The resource is displayed as provisioned and it is created an entry in the parent table of the resource, but not on child table
- I also observed that only: "System Validation" and "Create User" tasks were executed (status=Completed). But it is missing the task "Child Table UD_<connector child table name>_US row Inserted"
- The error log info displays only an error regarding to UGP table (Groups info) but I am not sure if that is the cause of entry creation on child table.
It seems the SQL stmt tries to get ugp_name (group name) using ugp_key but that has null value.
"SELECT ugp_name FROM ugp WHERE ugp_key=java.sql.SQLSyntaxErrorException: ORA-00936: missing expression"
Note: When testing manually (without auto save form), I got "SELECT ugp_name FROM ugp WHERE ugp_key=1" which it is the same SQL stmt but the value is provided.
My guess:
- It seems that error is aborting the whole execution process so "Child Table UD_<connector child table name>_US row Inserted" task does not run, even though previous tasks are finished with the status=Completed. Consequently, the entry is not created on child table.
Please, any guess or help would be very helpful. In case nothing works, I guess I will have to create and customize a "Update child Form" task as an workaround which would be called after "Create User" task.
Regards,
Hugo
My environment:
- Windows 2003, WebLogic 10.3.0.0, OIM 9.1.0.2 BL4, Oracle 10g, Java 1.6, DB App Table Connector 9.1.0.2 (from October 2009)
- Target Resource: Parent and Child Table (Oracle 10g - the same OIM DB)

An update:
I solved that error about "ORA-00936: missing expression" applying OIM 9.1.0.2 BP05. That was not impacting my issue regarding direct provisioning with auto save form and child form.
So please if anyone can confirm:
- Can I set up prepopulate adapters on child forms AND also use "auto save form" on GTC DB App Table connector?
If not, any suggestion?
Regards
Hugo

CS6 Auto-Save: 1 step forward, 1 step back

I have done a little testing with the auto-save, and there is some progress with CS6 - especially in the area where earlier versions would stop playback or scrubbing to fire off an auto-save.
It looks like the auto-save does not stop playback or scrubbing on the timeline anymore. It will stop you from other operations such as moving an audio slider or other non-critical mouse clicks. I tested with 1 minute intervals, and it appears that it won't auto-save during playback or scrubbing in the background, and will wait until the next interval after playback has stopped until it saves. (Instead of taking the very next possible moment after playback has stopped to makeup for the save) This seems like it could create the possibility that if you are playing back or scrubbing during multiple interval moments, you could have a long period where there are no auto-saves - especially if you set the interval to a high number. Like I said, I only tested with a 1 minute interval, so maybe this functions differently if you save every 10 or 20 minutes. Maybe then it will do an auto-save right after playback has stopped if it has been awhile.
The step back is that if you hide PPro, (I'm on a Mac, btw) instead of just bouncing the dock icon during an auto-save like previous versions, it will actually bring PPro to the front and block out/cancel anything else you are doing on your machine. How annoying! I can't figure out the reason to have it function like this. If it is simply hidden behind other windows, it does not do this, instead only brings to the front the small auto-save progress bar - It only happens if you hide the appplication. For example, if you are moving back and forth between PPro and AE, you could be working away on a comp in AE and suddenly PPro jumps to the foreground to let you know it did an auto-save. Since I have 2 monitors, I like to hide apps that I'm not working in to hide pallettes and other windows so I can have my desktop back. Seems like the solution for now is to not hide PPro ever and to do a proper save more often to avoid the issue of potential long periods of no auto-saves. (And submit a bug report?)
Anyways, long post for a potential trivial thing, but for those who care about this, it is a change. Anyone else experiencing this?

Jim,
Exactly, and that is what the "1 step forward" is with CS6. It drove me crazy when Auto-Save would interrupt playback. I was suggesting that it would be a better option that if you are playing back during an auto-save interval, it should take the very next opportunity to fire off a save, like maybe after hitting stop when there is a moment of downtime. However - in my testing - it looks like it skips that interval completely and waits for the next one. So, if you have it set to save every 10 minutes, but are playing back your timeline during each of those 10 minute intervals, it will never auto-save even if there are large stretches of time in between when you are doing nothing. It seems like it could be more intellegent about when it saves, and do it quieter in the background.

Auto save is not working

There is some problem after upgrade to Lion, Auto save version is not working in Iwork and anyone can fix it please advised. T.T

I have experienced projects not being auto save back-uped, and linked that to file structure problems (like I moved the project from the folder where it originally was created, or I changed the folders name where the Pr project was residing after starting it. I think that these things can lead the Auto-Save to get confused sometimes. This can also happen in Ae as well.
I have gotten used to making a duplicate of the project every day or at junctures of major change in the finder. The Mac finder duplicates the project file with the added word "copy" so I know that it isn't the original project file. I then add the date and time to the end of the file name _yymmdd_hh and send a copy to another drive.
It's too bad that there is no option in Pr to have it save the Auto-Saves to different drive than where the original is.
I also use a droplet created with a Mac renaming utility called "Name Mangler". Here is the macro for the advanced area of the re-namer in case anyone is interested.
[concatenate
<name>,
"_", [modified "%y%m%d_%H"],".", <extension>
I just drop the project file onto the droplet and it gets appended with its modification date.

How to Auto Save in iteractive forms

Hi All,
I am working on an interactive forms development in SAP.
The requirement is to have a auto save functionality as in MS office documents.
Also can we have book marks for the documents.
Your help is much appreciated.
Regards,
Sai

Hi All,
I am working on an interactive forms development in SAP.
The requirement is to have a auto save functionality as in MS office documents.
Also can we have book marks for the documents.
Your help is much appreciated.
Regards,
Sai

How to auto save and pre-fill some textfields

first time i open a pdf, there are some textfields. they are all empty.
i click on a button to call a web service. this returns some text and fill in those textfields.
if one of these textfields, "message", has got an auto-filled text "success", then the pdf needs to remember the text in some of the rest of the fields. next time when the user open it, those fields should be with the text generated last time.
notice that the "Do you want to save the file" auto-popup window won't meet my requirement. even if the user clicks on "no" for this popup window, now that i get a "success" transaction from the web service, the fields should be saved.
i read through this, but may not be able to use it. i only have LiveCycle Designer ES3. I don't know how those adminui or process work.
http://livecycleapps.wordpress.com/2009/10/21/livecycle-es2-using-action-profiles-to-pre-f ill-a-form-for-display-in-workspace/

Hi,
in Designer ES3 there is an Auto Save option in the form properties you can activate.
Remember, the form needs Usage Rights to be savable through Reader, so you need Acrobat to apply those rights to your form first.

Auto Save and Versions

Where can I control Auto Save and Versions? I can't find it in System Settings.
Can I control it by terminal commands?
On http://www.apple.com/macosx/what-is/ Apple claims:
Versions creates a new version of a document each time you open it and every hour while you’re working.
While here http://www.apple.com/macosx/whats-new/auto-save.html Apple claims:
Forget about manual saving and forge ahead with confidence. Auto Save in OS X Lion automatically saves your work, while you work, during pauses and every five minutes. And Lion saves changes in the background so you're never interrupted with progress bars.
So I wonder every five minutes or every hour? Would be nice to make sure on each Mac itself whether it auto-saves every five minutes or every hour and to actually allow its user o set the frequency.

It does both. It saves your work in the current version every 5 minutes. Every hour, it creates a new version of the document.
I haven't searched for any version settings, yet.

Is there auto save in pages?

Is there a function for auto save in Pages. Word has it and it's really useful especially when the program quits unexpectedly. I like using pages but i've also lost quite a bit of important stuff because it does not auto save. anyone can has a solution other than consistently saving my work? thanks

WWJD wrote:
I believe Mr Yvan has written such a script. Do a search for "Yvan" or "Koenig
You may drop the "Mr"
My autosave script is available on my iDisk:
<http://idisk.mac.com/koenigyvan-Public?view=web>
Download the archive
autoSave_iWork.zip
Yvan KOENIG (from FRANCE dimanche 9 mars 2008 21:34:31)

Auto Save - Lost My Homework - Power Outage

Help - I am brand new to Mac - I love my new iMac 24", but the power went out tonight as I was in the middle of my homework assignment. I was using Pages to write my report and had not saved in the last 30 min's. I lost everything I had done! Can you tell me how to set a auto-save function so if I have another power outage, I won't lose all my work again? If Mac's don't have this feature, is there 3rd. party software that will do this? If a PC can do this, I know a Mac can do it, but I just don't know how to turn that feature on.

Rick,
I believe there is no such feature in Pages. And a Web search recently did not uncover 3rd-party s/w for Mac to do this, although I did see a link to someone who had written a script for it. All in all, I'd say for the moment it's easier to train ourselves to be paranoid and hit Apple-S every few minutes :o)
MacBook Pro Mac OS X (10.4.9)

The auto save function will not turn off.

While opening some files, I get- "This document was not closed properly, and some of your changes weren't saved. Do you want to recover these changes or discard them?
Niel helped me to figure out that this was happening because the save option and recent items option was checked in the appleworks preferences. I unchecked the "auto save" and "recent Items" options in appleworks preferences>General>files settings window and It seamed to work for awhile but now the problem is back.
I don't know why, but the "Auto Save" folder inside the appleworks User Data folder, which is inside the Documents folder is still saving data.
Can someone please help?
Marco

Greetings Peggy,
Nice write up link! I deleted "appleworks 6 preferences" in home file>library>Preferences>Appleworks folder (and the com.apple.appleworks.plist). Then turned appleworks back on and went to preferences>general settings and unchecked the "auto save" and "recent Items" options in appleworks preferences. I noticed the "make default" option button didn't light up. Do you think that is a problem?
The "document was not closed properly" problem happens about every two days or so. I haven't been able to duplicate what ever I'm doing. I'll wait and see, and let you know.
Thank you very much.
Marco

Auto save didnt

Similar Messages

Maybe you are looking for