Auto Save folder not being created with new project

Just recently I've noticed that when I start a new project there is no auto save folder being created.  I have all preferences the same (auto save every 10 min with a max of 50 and save next to project files).  I have no idea why this started or what I can do to fix it. 

So it seems to be working now.  I went back through other projects that have been open for some time and the most recent auto save file I could find for any of them was from Oct. 8th.  So auto save hasn't been working at all.  What I did was go into preferences and change the interval a little and the frequency from where I had had it since intial set up.  That seemed to have told it to turn it back on for some reason.  It's really weird.  I guess I'll just keep an eye on it, but people may want to check there folders just in case the same issue is happening.  I didn't realize it until today and it's been happening for a couple of weeks apparently. 

Similar Messages

  • XMP files not being created with DNGs...

    I'm used to using Bridge with ACR to process Nikon NEFs. But a recent camera update has me experimenting with converting the D3's NEFs to DNG files and editing them with CS2 and Bridge 1.04 which works better on my system. I've also experimented with CS3 and Bridge 2.1.1.9 with the same DNG files.
    In both cases XMP files are not being created when working with DNG files. I have enabled "Save image settings in : Sidecar ".xmp" files" turned ON. But they do not seem to be generated and I assume the ACR adjustments are being embedded in the DNG file. Meanwhile doing edits on NEF files continues to create .xmp files as expected.
    I find .xmp files to be very useful and I'm wondering why they're missing with DNG files? Are they hiding somewhere other than in the same folder that the images reside in?
    Thanks.
    Russell

    > The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
    Aww, yuck!! That's a real drag...
    When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
    So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
    I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
    Guess I won't be using DNG any more..
    Thanks for the help Kees :-)
    Russell

  • CcmEval Scheduled task not being created with "Access Denied" error 0x80070005 only on XP machines

    Before coming on here I checked out http://social.technet.microsoft.com/Forums/en-US/ddbfe6c3-ee54-4b2a-a3a7-a6515d974f76/client-check-failed-on-xpserver-2003-systems-onlyccmeval-is-not-being-scheduled?forum=configmanagerdeployment (GPO
    to allow scheduled tasks by users) and another thread about a hotfix that seems to be pre-XP SP3 and pre-CM 2012 R2.
    That said, I'm having an issue many seem to have, but I can't find the answer. From what I understand SCCM uses the user context to create the CcmEval task, but in XP users cannot set a task to run as any other user (ie SYSTEM in this instance) so what is
    the workaround? I can't just give users Administrator permissions to install the client.
    The exact log entries are:
    <![LOG[Client evaluation task doesn't exist.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:705">
    <![LOG[Client evaluation task is not found or is disabled or is not compliant, perform remediation]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2"
    thread="4356" file="ccmevalcheck.cpp:341">
    <![LOG[Attempting to recreate client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356" file="ccmevalcheck.cpp:833">
    <![LOG[Task scheduler 2.0 is not supported, peform task registration with 1.0 API.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356"
    file="ccmevaltask.cpp:345">
    <![LOG[Failed to delete task Configuration Manager Health Evaluation (0x80070002).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356"
    file="ccmevaltask.cpp:379">
    <![LOG[Failed to create task item (0x80070005).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="3" thread="4356" file="ccmevaltask.cpp:387">
    <![LOG[Failed to create client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:850">
    The bolded section is what's telling me it's Access Denied, and manual creation of any program task set to run as SYSTEM tells me the same- users cannot do this; only admins can.
    What can I do?

    So after sifting through some RSOP results and GPO objects I found a policy that wasn't necessarily prohibiting creation of them. (Not where you think it would be - under
    Administrative Templates > Windows Components > Task Scheduler > "Prohibit New Task Creation" -
    this was set to allow them) but this one I found was a File Permissions policy that set SYSTEM permissions to READ and EXECUTE.
    I've changed this to FULL CONTROL for SYSTEM. I'm unable to get on the machines to examine everything closely, but from what I can see at least one of them has remediated themselves and now has a successful client check in the console. Hopefully the rest
    of them will come around as GP updates itself and the client does an evaluation to remediate the Scheduled Task.
    Hopefully this helps someone in the future as well.

  • Group Folder not being created

    Within workgroup manager for particular groups I have selected an auto mount folder as a group folder. I have also specified diradmin as the owner. Now I assume once doing that Workgroup Manager should automatically create a folder for that group... however it isn't doing that? Can anybody help me as to why it is not working correctly?

    Hi
    In the past (10.4) it could take anything up to 3 days for the Group folder to be created - yes it's true. Issuing this command:
    sudo /usr/bin/creategroupfolder
    Got it done quickly. Now days I prefer to create my own and make a created group the owner. Less time and fuss.
    Tony

  • Portable Home Directory (PHD) not being created for new users

    Creating users in the Workgroup Manager also created their home directories at the time I created it when we were using Leopard 10.5 server.
    But now that it is upgraded to 10.6 server, it doesn't do anything when I create a new user and tell it to "Create Home Now".
    Any idea how to fix this?

    Assuming that the server is properly configured (most importantly DNS) try running sudo createhomedir -a
    and see what that does. In my experience, clicking the create home now button doesn't always work.
    See here for more info on this command.
    http://support.apple.com/kb/TA21050?viewlocale=en_US
    Note that this has worked for me on 10.3 to 10.5 Server - I've not tried it with 10.6.
    Jeff

  • When clicking on link in email, new tab NOT being created, but new window on existing tab - I want NEW TAB for each link clicked on...

    Up until today, whenever I clicked on link in email, a NEW TAB would be created. Now, when I click on link, a new WINDOW on existing tab is created - I WANT A NEW TAB, not a window...

    Hmmm, which mail site is this?
    One possibility is that you had a tab-related extension that automatically opened regular links in a new tab, and that the extension was disabled because it was incompatible with the latest version. To check for disabled add-ons, visit the Tools > Add-ons dialog.
    As a short term workaround: you probably know you can force a link to open in a new tab by holding Ctrl when you click the link, or by using the "middle" mouse button (often the scroll wheel). I find that quicker than right-clicking the link and choosing Open in new tab.

  • Calendar items not being created with sync

    I seem to have calendar items that don't sync properly or at all when I sync the computer calendar program with the phone.  Any thoughts on the problem?
    Post relates to: Centro (Verizon)

    I'm having the same problem.  I've created categories on my palm but when I sync with computer the events or categories don't show.  Some have but some have not.  The sync process stalls out when I try to have palm over ride the computer so I don't know if that's the problem.  If so I don't know why it stalls out.  I have the same problem with tasks I've created.  Good Luck!
    Post relates to: Centro (AT&T)

  • Cannot create a new project with iMovie. Operation could not be completed. No solution to the problem is available.

    Every time I go to create a new project in the latest version of iMovie for mac OS X yosemite, I get the following information. "The operation could not be completed. No further information is available about the problem.
    I have tried restarting the computer, that didn't work. I also tried also, to reinstall the app. That didn't work. I even tried updating all the software, and that still didn't work. I am very frustrated and feel the mac was not a good gift, if a major essential app will refuse to work. Nothing I do, seems to work.   

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
    When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

  • Every time I save a draft it creates a new draft rather than updating thr dradt I am working on

    While writing an E-Mail I may receive a call so I need to save the E-Mail. I click save and it creates a draft which is fine. I go back to add to the draft and must save again and it creates a new draft. Every time I save it creates a new draft rather than updating the old draft as it does on my other computer

    Chris, my guess is you may be confused by one or more tilde files inside the project, a project file with a tilde (~) in its name.
    If the project was begun in iMovie 4, the project resides in an iMovie 4 type-folder, not an iMovie 6 package. The folder lets you see the tilde file. For projects begun in iMovie 5 or 6, the project is a package instead of a folder. And you never see the tilde file, for the package looks like a file instead of a folder.
    The problem is discussed here:
    http://discussions.apple.com/thread.jspa?messageID=1971832&#1971832
    My guess is you're opening the wrong project file to re-open the project. So when you save, it's saving a new tilde file.
    The whole issue is rather confusing. Check out the topic, and if you can't get it straightened out say more about what's going on there.
    Karl
    PS: If you haven't yet, create a new iMovie 6 project, add something to it and save. To look inside the package, Control-click on the project (in the Finder) and choose "Show Package Contents" from the popUp menu. You will see one tilde project file and one project file without a tilde. That's ALL the project files you should ever see.

  • Class not being created when running from jar

    Hi all,
    Tech info first:
    IDE: Sun Java Studio Enterprise 8
    Plaform: windows xp
    I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
        private static void createAndShowGUI() {
            //Make sure we have nice window decorations.
            JFrame.setDefaultLookAndFeelDecorated(true);
            Main receiver = new Main();
            receiver.getPropertiesFromFile();
            //Create and set up the window.
            frame = new JFrame("R�FILOG RFID Empf�nger");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setContentPane(receiver.mainPanel);
            frame.setJMenuBar(receiver.createMenuBar());
            frame.addWindowListener(receiver);
            frame.setLocationByPlatform(true);
            //Display the window.
            frame.pack();
            frame.setVisible(true);
            portListener = new RFIDReaderComm(receiver, "COM3");
            portListener.getConfiguration();        
        public static void main(String[] args) {
            //Schedule a job for the event-dispatching thread:
            //creating and showing this application's GUI.
            javax.swing.SwingUtilities.invokeLater(new Runnable() {
                public void run() {
                    createAndShowGUI();   
    portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
    If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
    thanks in advance.

    Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
    This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
    Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
    Updating my computers CLASSPATH with the relevant paths - not working
    Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
    Tried updating the manifest.mf in the following way:
    Created a text file Manifest.txt with the lines:
    Class-Path: RXTXcomm.jar
    Class-Path: BrowserLauncher2-10rc4.jar
    ran the command (in the same directory as Manifest.txt):
    jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
    but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
    META-INF/
    META-INF/MANIFEST.MF
    classes/
    classes/CRCCalculator.class
    classes/Main$1.class
    classes/Main.class
    classes/RFIDReaderComm.class
    classes/URLDialog$1.class
    classes/URLDialog$2.class
    classes/URLDialog.class
    the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
    Please, can anyone help me?

  • Accounts being created with administrative group rights

    Hello,
    The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes.  It runs Hsphere control panel.  I am trying to identify how the following hack is happening. 
    1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
    User Account Created:
         New Account Name:    username
         New Domain:    PCNAME
         New Account ID:    PCNAME\username
         Caller User Name:    PCNAME$
         Caller Domain:    DOMAINNAME
         Caller Logon ID:    (0x0,0x3E7)
         Privileges        -
     Attributes:
         Sam Account Name:    username
         Display Name:    <value not set>
         User Principal Name:    -
         Home Directory:    <value not set>
         Home Drive:    <value not set>
         Script Path:    <value not set>
         Profile Path:    <value not set>
         User Workstations:    <value not set>
         Password Last Set:    <never>
         Account Expires:    <never>
         Primary Group ID:    513
         AllowedToDelegateTo:    -
         Old UAC Value:    0x2DAB2B0
         New UAC Value:    0x2DAB2B0
         User Account Control:    -
         User Parameters:    <value not set>
         Sid History:    -
         Logon Hours:    <value changed, but not displayed>
    There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
    2) I tried to identify what Caller Logon ID:    (0x0,0x3E7) means.  I found out from here:
     http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
    Output from LogonSessions.exe is pasted below (snippet):
    [0] Logon session 00000000:000003e7:
        User name:    DOMAINNAME\PCNAME$
        Auth package: NTLM
        Logon type:   (none)
        Session:      0
        Sid:          S-1-5-18
        Logon time:   9/11/2014 12:41:53 PM
        Logon server:
        DNS Domain:   
        UPN:          
            4: System
          316: smss.exe
          364: csrss.exe
          392: winlogon.exe
          440: services.exe
          452: lsass.exe
          628: svchost.exe
          756: LMAgent.exe
          840: svchost.exe
         1000: spoolsv.exe
         1252: avagent.exe
         1268: camWMIAgent.exe
         1324: cissesrv.exe
         1380: cpqrcmc.exe
         1404: vcagent.exe
         1440: svchost.exe
         1480: HsQuotas.exe
         1740: inetinfo.exe
         1780: EmailAgent.exe
         1856: snmp.exe
         1884: sysdown.exe
         1920: smhstart.exe
         2192: svchost.exe
         2388: cmd.exe
         2396: hpsmhd.exe
         2444: cqmgserv.exe
         2464: cqmgstor.exe
         2484: HSphere.exe
         2596: wmiprvse.exe
         2676: cmd.exe
         2684: rotatelogs.exe
         2692: cmd.exe
         2700: rotatelogs.exe
         2732: searchindexer.exe
         2812: hpsmhd.exe
         2824: cqmghost.exe
         2852: svchost.exe
         3044: cmd.exe
         3052: rotatelogs.exe
         3080: cmd.exe
         3088: rotatelogs.exe
         5452: svchost.exe
         5596: GravitixService.exe
         7392: csrss.exe
         7232: winlogon.exe
         6888: csrss.exe
         9832: winlogon.exe
        10388: wawrapper.exe
        10352: cpqnimgt.exe
         9496: msiexec.exe
         6068: w3wp.exe
         4748: webalizer.exe
    3) I also learned from http://support.microsoft.com/kb/243330/en-us that   Sid:          S-1-5-18 means:
    SID: S-1-5-18
    Name: Local System
    Description: A service account that is used by the operating system
    That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
    I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
    The server is fully patched and it is running Lumension security product.  What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
    Hope someone with advanced admin skills can advise.
    Thank you

    Hi,
    You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
    In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group.  So no users with Administrative group should be ever created.  If this happens,
    it constitutes a breach of server security=positive hacking attempt.
    >how in the world users are being created and then being assigned administrative group rights.
    In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
    I want to be able to understand in full how/what process is allowing users to be created with Admin rights.  In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
    it so that we can patch this particular hole.
    Best Regards,
    Amy

  • Creating a new project with media manager

    This one should be obvious but I can't quite figure it out: I used media manager to recompress my project into a smaller one. Media manager did a nice job with that and placed all the files into a new folder BUT - where is the actual project file?? If I use the actual fcp project file from the original- the settings are all different and it told me that some media files are missing or too short. Doesn't media manager create a new project file that works with the new recompressed files that it just created??

    BUT - where is the actual project file??
    When you have decided on the settings in Media Manager and then tell it to do the job, the first thing you see is a dialog asking where to save the project file. Use Spotlight to search for it.
    If that doesn't turn anything up, start MM again, it might have remembered the last Save location.

  • Itunes 11 shows zero photos in Aperture and ApertureData.xml not being created in library

    I've tried to do some trouble shooting of this problem. I've rebuilt permissions, I've repaired and rebuilt the Aperture library, I've made sure sharing previews is always for iLife and iWork, I've created a new library, switched to it and switched back and I can't get iTunes to see my albums and pictures from my iPhoto library when I try to sync through Aperture. What I have found is when I created the new temporary library and loaded one pic into it, a file in the package contents called ApertureData.xml is created, which isn't created in the iPhoto libary, it has AlbumData.xml. iTunes does recognize the temp library and photo. I deleted the AlbumData.xml, but it was just recreated. It seems Aperture is supposed to be creating a file that it isn't. Any help would be appreciated, I'm trying to migrate from iPhoto to using Aperture exclusively to manage photos and sync with devices. All software is up to date. Thanks. 

    in case anyone searches and finds this question, but importing by iphoto library to aperture into a new library, I fixed the problem. I do not know how to fix the original issue of the aperturedata.xml not being created in the origianl iphoto library.

  • User Profile Disk not being created

    Hi,
    I created a new 2012 VDI collection. Things seems to be working fine except for the User Profile Disks are not being created. From my understanding a .vhdx prefixed with the user's SID is supposed to be created when the user logs into one of the virtual
    machines from the collection. I can see that a UVHD-template.vhdx" was created correctly but when logging on to one of the deployed virtual machines from the pool there is no  other .vhdx files (except the template).
    From what I've read the virtualization hosts must have write access to the share (they do).  I can't seem to find any other requirements. I've searched through event viewer and found nothing. I'm not sure which logs to check on which server.
    Anyone have any ideas what I'm missing?

    Hi,
    Thanks for your post in Windows Server Forum.
    Kindly follow the below mention article and check the necessary steps for creating UPD, try to create new UPD.
    1.  Working with User Profile Disks on Session-Based Desktop Deployments
    2.  Easier User Data Management with User Profile Disks in Windows Server 2012
    Hope it helps!
    Thanks,
    Dharmesh

  • Reasons for billing documents not being created ?

    I am trying to create a billing document from a delivery (VF01). When I enter document number and save, it says 'no billing documents genereated, see the log'. Where to see the log and what do you think could be the possible reasons for billing document not being created ?
    Thanks in advance,
    Krishen

    Hi,
    In VL02 transaction, Its the 2nd button on the toolbar With an `!` mark on the icon along with triangle. CLick that button. It will display the errors bcz of which delivery is not created.
    In VL01, goto EDIT-> LOG.
    The explanation of errors is usually pretty detailed.
    Best regards,
    Prashant

Maybe you are looking for