Auto select not working ?

I've been struggling to understand copy and paste in version 5 and I am either not understanding it correctly, or it's not working as it is supposed to. If I auto select track 2 only, then copy and paste a clip from track 1, it will still paste to track 1. Am I doing something wrong?

Turning autoselect off and then on a second time worked. It's nice to finally be able to do this, but is this supposed to be a sensible or intuitive way to copy and paste? I much preferred FCP3's way. Thanks for the help.

Similar Messages

Auto Select not working in Photoshop CS6--Why?

I'm experiencing the auto-select in Photoshop CS6 not working when it is checked and I click on different layers. It worked fine in 5.5, but I am now using PS CS6 cloud and it works only sporadically. Any reason why?
Thanks in advance!
-Jane

Moving this discussion to photoshop Forum discussion.

Auto select not working with tethered shooting

Hi,
I'm shooting images in a studio tethered, and up until yesterday it was working like a dream. I take a picture and it shows up on my mac... but now it's stopped working. The images capture ok, but the viewer doesnt show the most current picture.
I've checked that 'auto select' is ticked/checked on the HUD... and havent changed anything on my set up... so I'm hoping someone has an idea what it might be.
I'm working with the latest version of Aperture 3 on Lion with a Canon 5D
Any help greatly welcomed
Jack

When I thether It will work fine till the end of the day and I then I have to reboot. Once I reboot the images are captured and advance properly. So I suggest rebooting the machine. If it doesnt work normally at the start Id do the trouble shooting steps in
Aperture 3: Troubleshooting Basics
re boot in safe mode then ...
Start AP while holding the option key and repair permissions
delete the user AP preferencs
use disk utlilties to repair permissions
use Single user mode to type in th fsck command (look it up first)
Its alot but it covers alot also

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

AUto attendant not working

Auto attendant not working .....
If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
Is there Option to set
Please press the extension which you want to Call ...
Eg: if i press 222 that time it should ring the 222 extension
Please help this is the first time i am working on this stuff
If i chnage the scrpt file then i can hear auto attendant not initiazlised.. please find the attched screen shot and back file for more details.
Best Regards
Shabeel

Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
Check also the Calling Seach Space
GW should be able to reach CTI Route Point and CTI ports partition.
If you try other extension it works fine?

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Auto brightness not working on iPhone 5?

On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
Anyone else have this problem of the auto brightness not working?

There is nothing wrong with the auto brightness.
When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
If you have the slider too high the brightness cant reduce because youre not letting it.
Set your brightness at about 25% and you'll see what I mean.

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

Windows Server 2008 R2 DNS Entry Auto remove not working

Dear All,
I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
how to solve this ?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
This is a rather common problem when configuring Scavenging and Aging of stale DNS entries. This has to be set in two spots, not just one as so many admins have difficulties with. It isn't very obvious.
Aging and Scavenging must be set on both the DNS Server and on the Zone
that you want to clean. In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered. Static entries are ignorned.
First step:
To set aging and scavenging properties for the DNS Zones using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Set Aging/Scavenging for all zones.
Select the Scavenge stale resource records check box.
Modify other aging and scavenging properties as needed.
Second Step:
To set aging and scavenging properties for the DNS Server using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Properties.
Select the Advanced tab,and then enable Enable automatic scavenging of stale records
check box. Once done, specify the Scavenging period (That is recurring
interval for Scavenging on a DNS server) and click on OK
That will do it. Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
off, nearly brought the company to a halt.

Auto Caption not working

Hi I have been trying everthing but can't get the auto
captions to work am aware of the rule use Demo or Custom mode. It's
really anooying, is this a bug or should it work. Vers 3.0.0 Build
580 can anyone help Rick you seem to have answers can you?????
Thanks

Hi again
You might try resetting your Captivate preferences file.
Sometimes that fixes things. I've never known it to specifically
address the issue you are having, but hey, it's worth a shot!
To reset the file, close Captivate. Now open Windows Explorer
and navigate to the following location:
?DriveLetter?:\Documents and Settings\?UserName?\Application
Data\Adobe\Adobe Captivate
*NOTE: ?DriveLetter? will be whatever drive you have
Captivate installed on. ?UserName? will be however you logged into
your PC.
If you don't see this location or files, it's probably
because Windows is “helping you out” and hiding them
from you. To fix that, click Tools * Folder Options * View tab and
ensure you are Showing hidden files and folders as well as
DE-selecting the Hide extensions for known file types and Hide
protected operating system files.
Rename or Delete the file you should find in this location.
The file is labeled
captivate_v30.dat.
Restart Captivate and give it a try.
Beyond that, I'm unsure as to exactly why Captivate wouldn't
automatically insert captions. Unless for some reason it was
improperly installed. But in that case, I'd think other symptoms
would present themselves.
Cheers... Rick

LOV filter - Auto Submit not working after the value is made to VS.filter

JDeveloper 11.1.1.4.0
I have cascading LOV filters for a table with fields id, deptid, projectName. The filters are for deptid and projectName. When I select a deptid, the projectNames belonging to that deptid should be populated. I have set Auto submit for deptid filter and partial trigger for project Name. So if I select a deptid and when I navigate to Project Name filter I get the list of project Names in the Project LOV filter.This worked fine as long as I didnt change the value for LOV to Vs.filtercriteria.deptid. Once I changed it the LOV filter for Project Names only got refreshed once I hit ENTER key after changing the value of Deptid. But I have to keep the value for LOV to Vs.filtercriteria.deptid. Other wise the records in the table after applying the filter values didnt function properly. I dont know whether the AutoSubmit does not work when the value is changed to Vs.filtercriteria.deptid

duplicate post.
Frank

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Auto resolve not working for cached outlook

We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode. Not in cached mode or via owa, it seems to work fine.

Hi,
Does the issue happen to all users or some specific users?
Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

Auto select not working ?

Similar Messages

Maybe you are looking for