Auto select u201CView selection only on requestu201D in selection view screen-MM02
HI Friends,
I want to auto set u201CView selection only on requestu201D in selection view screen before entering into various views (Basic data 1 / Basic data 2 . . .etc) for t.code- MM02 for all users. Please let me know where needs to be set.
Thanks in advance.
RAMAN.
Hi
Please go to SM30 and enter the table USRM1. There you can control the user departments for the users and check the required filed " View selection on request" field name : -ASCHL.
Hope this helps your requirement.
Regards,
Sunil.K
Similar Messages
-
How do you auto tone a group of photos. I tried command a to select all and then auto tone but it only did one Photo. I troes several times and yes all photos were selected
In Develop you can highlight a group of thumbnails in the filmstrip, then right-click and choose Develop Settings -> Auto Tone
In Library you can highlight a group of thumbnails in the Grid and click the Auto Tone button in the Quick Develop area.
What you can’t do is click the Auto button in Develop and have it do more than one photo—this is by design, except, maybe if you have Auto Sync enabled. -
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T. When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.
If your phone service is disconnected, it's not your number any more.
If you "just got AT&T", how can it be disconnected? -
when i connect my iphone to my laptop and open itunes it shows my iphone has nothing on it(no music, no movies, etc...) then when i try to sync it says iphone is is full and can only put in a selected amount of songs. Take in mind this is my first time to sync with this laptop(HP 15 ENVY) and as well my laptop is just brand new. just got it a week ago. so how do i fix this prob. and also when i open my itunes store and then view my account it says error occurred either debug it through Microsoft visual studio or close program. I tired copying all the .dll files to the itunes folder didn't help
I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535
-
After updating AVG anti-virus, I encountered a problem on Firefox. I would select a link from the drop down on the address bar but the page would not open after clicking on it. I would select it again, even double click, but the page does not open. I could only reach website by selecting google or yahoo from my dropdown on the most visited list and then click the website that I want to visit. I would like to do this in one step by just selecting a link from my history on the address bar and select a link instead of going to google and then writing the page I want to visit. What could be the problem? When going to the address bar to select a link to open, why does the site not open? Any help would be appreciated.
Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed with sync.
Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream. -
How Do I: Fill a read-only field based on selections from 2 DDlists?
Follow-up from issue:
http://forums.adobe.com/message/2417876#2417876
I have 2 drop-down lists... "Department" and "SubDepartment"
The selection in DDlist "Department" spawns a unique list in DDlist "SubDepartment"
I select the proper items from both DDlists.
When I do this, I want read-only text field "NameOnIDBadge" to be populated with a pre-defined entry.
Example:
In "Department" DDlist, select item "Finance & Administration"
In "SubDepartment" DDlist, select item "Food Service" from the list that appears
THEN:
In read-only text field "NameOnIDBadge" the following predefined read-only text appears: "Contract Food Serv."
(Thanks to Paul, I already know how to make the selection in DDlist "Department" affect the selection list in DDlist "SubDepartment"
but I don't know how to make the selection of both DDlists create a new pre-defined entry in a text field.)
I have attached a mockup of the file I am working with...I tried that but a few things went wrong.
1. After I select "Food Service" in the second "SubDepartment" DDlist, a Javascript error message pops up (see attached), and I have to click it to make it go away. Then the text "Contract Food Serv" appears in the text box.
2. If I select a different value in the Department DDlist, the rawtext still remains in place... it should clear out.
3. The raw text seems to be based on the selection of the SubDepartment DDlist only. However, I need specific raw text to be generated based on the combination of BOTH DDlists. (It could happen that a totally different Department DDlist could have the same item in its corresponding SubDepartment DDlist. In that case, the rawtext would be completely different.)
Correct example:
Department DDlist = Finance & Administration
SubDepartment DDlist = Food Service
NameOnIDBadge = Contract Food Serv <-- CORRECT
Incorrect example:
Department DDlist = Clinical Services
SubDepartment DDlist = Food Service
NameOnIDBadge = Contract Food Serv <-- INCORRECT (it might be something else) -
GR to be done against only Inbound delivery for selected vendors
GR to be done against only Inbound delivery for selected vendors. If the user putsthe combination " Goods Receipt+ Purchase Order+ Purchase Order Number " in MIGO , the error should be displayed as "Create MIGO with Ref to ASN"
At the time of MIGO, when user put the combination of Goods Receipt+ Purchase Order and purchase order number, BADI will activate.
BADI will search the vendor code from the entered purchase order in the Z table in which user maintain the vendor codes.
If BADI finds the vendor code in the Z table then, will give error as u201CPlease create inbound delivery firstu201D.
If BADI does not find the vendor code in Z table then it will inactive.
In short we are restricting the selected vendor for MIGO with reference to PO.Hi,
If u had used confirmation control key (0001) - In Item details of PO, as per standard SAP u cannot proceed for GR without inbound delivery. Otherwise use MB_MIGO_BADI. Thanking you -
After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?
Even simpler than that.
Clicking once in a text box selects it.
Clicking once in a selected text box places the insertion point in the box.
The clicks do not need to be close enough in time to be read as a double click.
The same behaviour applies to table cells in Pages and in Numbers.
Regards,
Barry -
Dropdown menus flicker only & can't be selected
When I type a web address, a drop down menu used to appear with suggestions. Now it flickers but cannot be viewed or selections made. Similarly the Most recently viewed dropdown box only flickers. Same this happens when using the quick search box at the right. On web pages the same thing happens with the autocomplete forms. They just flicker and disappear and can't be selected. This only started happening today.
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
If the problem persist then try a new profile as well
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup -
Resize only one object in selection, and other questions. InDesign CC
I recently changed from InDesign CS4 to CC. I'm having a few problems with the interface and can't figure them out.
1) This one is really annoying me: I select multiple items, like a picture and some text, to move them somewhere. I then want to maybe change the size of the text box, or crop the picture a little. What used to happen in CS4 was exactly what I wanted to happen: whichever item I clicked on to edit would be edited. In CC, it resizes everything selected! If I want to resize ALL the items, I'll group them. Is there an option to turn that off? I've looked through every menu I could find but didn't see anything that would refer to that.
2) In the same vein: When I select a couple items, like a text box on top of a burst or an ellipse or something, and I then want to edit some of the text. In CS4 I could double click and it would turn into the type tool and I could edit text. It still works the same in CC, but only if I have just the text box selected. If there's anything else selected, it just doesn't work.
3) I complained about this one when I changed from CS2 to CS4, but it's still a problem: When I print, and put in a particular page range, it prints those pages. Now, when I go back to print again, it has defaulted back to printing all pages. I'd really like to be able to hit CTRL-P then Enter, instead of using the mouse to select my page range again. Is there some option that I can change somewhere for that? It works fine in Print Booklet, and Export to PDF. It's only when I print normally this happens.
4) Every time I open the program, all my windows (Pages, Swatches, Stroke, etc...) are always minimized. It's annoying to have to open them every time. I couldn't find anywhere to change that either.
These are kind of minor inconveniences I guess, but it would be nice if I could change them. Other than these few things CC has been pretty good. I definitely like that it's 64 bit. I got out of memory errors a lot with CS4. Anyhow, thanks for taking the time to read my questions!TopePrinting wrote:
1) This one is really annoying me: I select multiple items, like a picture and some text, to move them somewhere. I then want to maybe change the size of the text box, or crop the picture a little. What used to happen in CS4 was exactly what I wanted to happen: whichever item I clicked on to edit would be edited. In CC, it resizes everything selected! If I want to resize ALL the items, I'll group them. Is there an option to turn that off? I've looked through every menu I could find but didn't see anything that would refer to that.
I have InDesign CS5.5 - and when I select more than 1 object I get a bounding box for all the items - it's impossible to resize just one item without affecting everything selected.
TopePrinting wrote:
2) In the same vein: When I select a couple items, like a text box on top of a burst or an ellipse or something, and I then want to edit some of the text. In CS4 I could double click and it would turn into the type tool and I could edit text. It still works the same in CC, but only if I have just the text box selected. If there's anything else selected, it just doesn't work.
I really don't see this behaviour at all.
TopePrinting wrote: 3) I complained about this one when I changed from CS2 to CS4, but it's still a problem: When I print, and put in a particular page range, it prints those pages. Now, when I go back to print again, it has defaulted back to printing all pages. I'd really like to be able to hit CTRL-P then Enter, instead of using the mouse to select my page range again. Is there some option that I can change somewhere for that? It works fine in Print Booklet, and Export to PDF. It's only when I print normally this happens.
No - this is the way it works - annoying!
What's really frustrating is that it will remember the amount of copies you've input too! I would like that reset to 1 after I print 100 copies. All too often I've opened a file from last year to print a copy and hit Ctrl+P and then Return as the shortcuts - and I get 100 copies printed again!!!
4) Every time I open the program, all my windows (Pages, Swatches, Stroke, etc...) are always minimized. It's annoying to have to open them every time. I couldn't find anywhere to change that either.
Once you have the screen setup the way you like it go to Window>Workspaces and click "New Workspace"
Save as it something unique to you.
Everytime you open InDesign this should be the default panel settings.
These are kind of minor inconveniences I guess, but it would be nice if I could change them. Other than these few things CC has been pretty good. I definitely like that it's 64 bit. I got out of memory errors a lot with CS4. Anyhow, thanks for taking the time to read my questions!
They are minor for sure - and we all have niggly bits in InDesign that frustrate us.
But unfortunately this is a user-to-user forum so it's unlikely to be picked up by Adobe employees.
I suggest you put it in the feature request forums - http://forums.adobe.com/community/indesign/indesign_feature_requests
There's the Adobe Feature Request page - https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
That's about as much as you can do. -
If I select multiple images to apply a change to all openings it does so only with the first selected. Why?
You probably have Primary Selection only on.
Aperture identifies the images you’ve selected by displaying them with a white border. When you select a group of images, the actively selected image, called the primary selection, appears with a thick white border and the rest of the selected images appear with thin white borders.
Primary Only button: Click this button to make changes to the primary image selection only. -
My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?
Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.
Maybe you are looking for
-
How can I use my external hard drive for storage?
I just bought a new external hard drive, the My Book Premium Edition II. I have totally spent all of the memory on my hard drive and want to transfer my music to my new hard drive and use it as my iTunes directory, but everytime I try to move my musi
-
Can't Send Email to Address Book Group
First time trying to create a group in Address Book and send the members an e-mail. Looks like the group is set up properly in Address Book, but I can't e-mail to the group. When I enter the group name in "To:" in a new e-mail in Mail, the name disap
-
Random Slow Requests that CFTrace Can't Find
Description: I am troubleshooting some slow loading pages and have been getting some interesting and inconsistent results. I'd like some help on how to better troubleshoot the problem, so that I can fix it. I started by looking at database query time
-
Need help to change line item text for 220 Line items
Hi Specialists, The user has posted a reversal entry ( doc type : Manual Accrual) using TCODE FBS1. It has 220 line items. Is there a way in SAP he can change the text of All Line Items for a particular document number in one shot ( Mass Change). Pls
-
After expiry of LR5 free trial, do I need to run the disc I have purchased?
I assumed registering code with Adobe would enable software but it doesn't appear to do so. I don't want to lose my work by doing the wrong thing! Thanks